MAX3232ECSE+ - Dual RS-232 Transceiver | Analog Devices
부품 번호: MAX3232ECSE+ ✓ 활성MAX3232ECSE+ 개요
A true RS-232 transceiver is an interface IC that converts logic-level signals from a UART or other asynchronous controller into bipolar RS-232 voltages, while converting received RS-232 levels back into CMOS-compatible logic. Within the electronics hierarchy, the MAX3232ECSE+ belongs to the RS-232 interface transceiver category and provides the physical-layer bridge between a digital controller and a serial-port connector.
The principal operating specifications are a 3.0 V to 5.5 V supply range, a maximum data rate of 1 Mbps, and a 16-pin SOIC package. Four external 0.1 uF charge-pump capacitors simplify power-supply implementation, allowing the transceiver to operate from a single low-voltage supply rather than a separate ±12 V source. The MAX3232 family is listed in production by Analog Devices.
The MAX3232E family adds ±15 kV IEC ESD protection on the serial-port pins and supports the TIA/EIA-232-F electrical interface. The dual charge-pump architecture converts the low-voltage supply into positive and negative levels needed for RS-232 signaling. The device combines one transmitter and one receiver in each direction, making it appropriate for two-wire point-to-point communication links.
Typical applications include industrial serial adapters, USB-to-RS-232 interface boards, point-of-sale equipment, instrumentation, and embedded systems using UART peripherals. Its 1 Mbps capability provides ample margin for legacy serial ports, while the 3.0 V to 5.5 V supply range allows integration with both 3.3 V and 5 V digital systems.
PCB design should minimize the charge-pump capacitor loop area and provide a direct return path from each capacitor to the device ground. Keep RS-232 traces short, route them away from clocks and switching nodes, and use the transceiver ground as the signal reference between the host electronics and the external connector.
This product page combines manufacturer specifications, package information, verified sourcing links, drop-in replacement options, and practical interface-layout guidance to support component selection, PCB compatibility checks, and production procurement.
드롭인 대체품: MAX3232ECSE+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3232ECSE+ (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Data Rate, Package, Supply Voltage Range, Product Type, Number of Drivers.
MAX3232CSE+
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232EEAE
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX3232IPWR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MAX3232EIDR
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →SP3232EEN-L
✅ 드롭인가격 문의
데이터시트 보기 →MAX3232ECSE+ 사양
| Transceiver Configuration | 2 transmitters and 2 receivers |
| Interface Standard | True RS-232 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| External Charge-Pump Capacitors | 4 x 0.1 uF |
| 핀 수 | 16 pins |
| 패키지 | 16-SOIC |
| 실장 유형 | Surface mount |
| ESD Protection | ±15 kV IEC on serial-port pins |
| Standard Compliance | TIA/EIA-232-F |
| Datasheet Revision | Rev. 10 |
| Production Status | Production |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| Automotive Qualification | not applicable |
| Lead-Free Status | unknown |
MAX3232ECSE+ 핀 구성
| 핀 1 | R1OUT — Receiver 1 output |
| 핀 2 | R2OUT — Receiver 2 output |
| 핀 3 | R2IN — Receiver 2 input |
| 핀 4 | R1IN — Receiver 1 input |
| 핀 5 | V+ — Positive charge-pump output |
| 핀 6 | C1+ — Charge-pump flyback capacitor 1 positive terminal |
| 핀 7 | C1- — Charge-pump flyback capacitor 1 negative terminal |
| 핀 8 | C2+ — Charge-pump flyback capacitor 2 positive terminal |
| 핀 9 | C2- — Charge-pump flyback capacitor 2 negative terminal |
| 핀 10 | V- — Negative charge-pump output |
| 핀 11 | T1IN — Transmitter 1 input |
| 핀 12 | T2IN — Transmitter 2 input |
| 핀 13 | T2OUT — Transmitter 2 output |
| 핀 14 | T1OUT — Transmitter 1 output |
| 핀 15 | GND — Ground |
| 핀 16 | VCC — Positive supply voltage |
일반적인 애플리케이션
MAX3232ECSE+ 적합 용도: 6 애플리케이션s: Industrial UART Serial Interface, USB-to-RS-232 Adapter, Point-of-Sale Terminal Interface, Test and Measurement Equipment, Embedded System Serial Console, Security and Access-Control Equipment.
Industrial UART Serial Interface
The MAX3232ECSE+ fits industrial UART links because it combines two drivers, two receivers, a 3.0 V to 5.5 V supply range, and operation up to 1 Mbps in a 16-SOIC package. Place it between a 3.3 V or 5 V controller and an RS-232 connector, with four 0.1 uF charge-pump capacitors connected close to the device. The MAX3232E family provides ±15 kV IEC ESD protection on serial-port pins, adding useful ruggedness for factory equipment with exposed cabling. The main design trade-off is that this interface must be referenced to the connector ground, and the exact temperature grade must cover the enclosure conditions.
추천
USB-to-RS-232 Adapter
The MAX3232ECSE+ is suitable for a USB-to-RS-232 adapter because it accepts a 3.0 V to 5.5 V single supply and supports serial data rates up to 1 Mbps. The USB controller can communicate through logic-level UART signals while the MAX3232ECSE+ translates them into true RS-232 levels for a DB9 or terminal connector. Its four external 0.1 uF charge-pump capacitors avoid a separate negative supply. Designers should keep connector-side traces short, provide chassis grounding according to the enclosure design, and leave exposed RS-232 pins only when the application requires that interface.
추천
Point-of-Sale Terminal Interface
The MAX3232ECSE+ can support legacy peripheral connections in point-of-sale equipment where a controller needs an RS-232 port rather than a modern USB interface. Two transmitters and two receivers permit a bidirectional serial link, while the 1 Mbps capability provides ample margin for common peripheral baud rates. The single 3.0 V to 5.5 V supply simplifies integration with embedded systems that lack a ±12 V rail. For reliable deployment, verify the connector ground and cable routing, respect the device’s exact temperature suffix, and confirm that the downstream equipment does not require a control signal absent from the two-driver interface.
추천
Test and Measurement Equipment
The MAX3232ECSE+ is useful in test and measurement instruments that need a legacy RS-232 control or data port beside a modern digital controller. The true-RS-232 interface supports communication with existing analyzers, controllers, and laboratory equipment, while the 1 Mbps maximum rate covers both slow command links and faster data-transfer modes. Its 16-SOIC footprint is compact, and the 3.0 V to 5.5 V operating range permits use with common laboratory and embedded supply rails. For sensitive measurements, route the interface away from analog inputs and switching nodes, and use the connector ground as the controlled return path.
추천
Embedded System Serial Console
The MAX3232ECSE+ enables an embedded controller to access an RS-232 service console, diagnostic port, or programming interface. Its 1 Mbps capability is substantially above typical console baud rates, while the 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V processors. The integrated charge pump produces the required bipolar RS-232 levels using four 0.1 uF capacitors, reducing system complexity compared with a discrete level-shifting solution. Place those capacitors close to their associated pins, maintain a compact ground return, and confirm that boot firmware drives the receiver and transmitter pins at the correct logic levels.
추천
Security and Access-Control Equipment
The MAX3232ECSE+ can be used in access-control and security equipment that retains an RS-232 connection for configuration, diagnostics, or peripheral communication. The MAX3232E family’s ±15 kV IEC ESD protection on serial-port pins improves tolerance of electrostatic discharge at connector-connected pins. Two drivers and two receivers support bidirectional control, and the 1 Mbps rating covers most configuration and diagnostic traffic. The design should include a stable connector ground, controlled cable routing, and verification of the exact operating-temperature grade. Any long external cable also warrants a separate system-level surge assessment rather than reliance on interface ESD protection alone.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3232ECSE+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3232CSE+ | MAX3232EEAE | MAX3232IPWR | MAX3232EIDR | SP3232EEN |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Sipex |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps | 1 Mbps |
| Interface Standard | True RS-232 | True RS-232 | True RS-232 | True RS-232 | True RS-232 | RS-232 |
주요 차별점
- Maintains the same core data-rate class as the leading same-brand alternatives (vs MAX3232CSE+)
- Adds the MAX3232E family ESD-protection feature (vs MAX3232CSE+)
- Retains a compact 16-SOIC interface without reducing the 1 Mbps data-rate capability (vs SP3232EEN)
설계 노트
Place all four 0.1 uF charge-pump capacitors directly beside their associated C1+, C1−, C2+, and C2− pins. Keep each capacitor-to-pin loop compact and connect the capacitor return directly to the device ground reference. Long charge-pump loops can increase radiated emissions and reduce effective operating margin, particularly near radio-frequency or high-speed digital circuitry.
Separate RS-232 connector-side traces from clocks, switching nodes, and sensitive analog inputs. Route the interface ground as a controlled return path to the connector ground reference and avoid sharing narrow current paths with switching converters. A solid ground plane is useful, but the exposed connector-side ground should still be routed according to the enclosure and EMC strategy.
Do not assume that every MAX3232 suffix has identical environmental or ESD ratings. Confirm the exact ordering code, temperature range, and serial-pin protection before substituting a C, E, I, or similarly suffixed member. Also verify whether shutdown and receiver fail-safe behavior are required; these functions can differ between family members even when the basic two-driver, two-receiver arrangement remains the same.
규정 준수 정보
The MAX3232E documentation identifies ±15 kV IEC ESD protection and TIA/EIA-232-F compliance. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require current manufacturer or distributor documentation for the exact ordering code.