Texas Instruments

MAX3232EIPWE4 - 250kbps Dual RS-232 Transceiver | Texas Instruments

부품 번호: MAX3232EIPWE4 ✓ 활성
3 V to 5.5 V Vdss 16-TSSOP, 0.173 inch (4.40 mm) width Package
MOQ: 1 |

MAX3232EIPWE4 개요

The Texas Instruments MAX3232EIPWE4 is a dual RS-232 line driver and receiver IC providing two transmit channels and two receive channels, a maximum signaling rate of 250 kbps, and operation from a 3 V to 5.5 V supply in a 16-pin TSSOP package. The device provides ±15 kV IEC ESD protection on its interface pins.

An RS-232 transceiver is an interface integrated circuit that converts between single-ended logic-level signals and differential, bipolar RS-232 signals. It belongs to the line-driver and receiver family, then to the broader transceiver and interface IC hierarchy. The MAX3232EIPWE4 implements the physical-layer signaling required by TIA/EIA-232-F and ITU V.28 systems while presenting ordinary CMOS logic levels to the host controller.

Key features include a 2/2 driver-receiver configuration, 3 V to 5.5 V operation, 250 kbps data rate, and ±15 kV IEC ESD protection. The -40 °C to 85 °C industrial temperature range supports both commercial and industrial equipment. Tape-and-reel packaging is identified for the E suffix, while the 16-TSSOP body measures 0.173 inches, or 4.40 mm, in width.

The MAX3232 family uses charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 transmitters. This allows the device to communicate over cable distances where the receiver must tolerate bipolar signal swings relative to ground. The integrated protection circuits help improve system robustness when users connect external cables or connectors to the board.

Typical uses include industrial serial consoles, data-acquisition equipment, instrumentation, printer interfaces, and embedded systems that exchange data with legacy RS-232 peripherals. The 250 kbps maximum rate is suitable for command-and-control links rather than high-throughput storage transfers. The 3 V supply option also helps reduce the logic power requirement in mixed-voltage embedded designs.

When laying out this device, place the charge-pump capacitors close to their designated pins, route transceiver outputs toward the connector, and keep sensitive logic-side traces away from cable-side nets. Confirm line-driver load capability, receiver thresholds, and system grounding in the manufacturer datasheet before releasing a high-volume design.

드롭인 대체품: MAX3232EIPWE4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MAX3232IPWG4

✅ 드롭인
Texas Instruments
📦 16-TSSOP
RS-232 line transceiver · 2 · 2 · 3 V to 5.5 V · 3.6 V as listed by Partstack · ±15 kV · -40 °C to +85 °C · 16-pin TSSOP

가격 문의

데이터시트 보기 →

MAX3232ECPWG4

✅ 드롭인
📦 16-TSSOP
Same 2/2 RS-232 transceiver format and 16-TSSOP footprint, with ordering-code and ESD-protection details differing from MAX3232EIPWE4

📋 참조 대체품 (카탈로그에 없음)

MAX3232ECPWE4

✅ 드롭인
📦 16-TSSOP
Same 16-TSSOP dual-transceiver package with a different E/CP ordering suffix, requiring verification of ESD rating, temperature grade, and tape-and-reel configuration

📋 참조 대체품 (카탈로그에 없음)

SN65C3232EPWG4

✅ 드롭인
📦 16-TSSOP
Pin-compatible RS-232 transceiver candidate in 16-TSSOP, but data rate, ESD rating, supply limits, and receiver thresholds must be checked against the target datasheet

📋 참조 대체품 (카탈로그에 없음)

MAX3232EIPWE4 사양

Product Type RS-232 line driver/receiver transceiver
Number of Drivers 2
Number of Receivers 2
데이터 속도 250 kbps
Supply Voltage Range 3 V to 5.5 V
ESD Protection ±15 kV IEC ESD
동작 온도 범위 -40 °C to 85 °C
패키지 16-TSSOP, 0.173 inch (4.40 mm) width
실장 유형 Surface mount
Packaging Tape and reel
RS-232 Standard Compliance TIA/EIA-232-F
ITU Recommendation ITU V.28
Automotive Qualification Qualified for automotive applications
Logic Supply Voltage 3.3 V
Transceiver Configuration 2/2 full-duplex
Manufacturer Texas Instruments

MAX3232EIPWE4 16-tssop, 0.173 inch (4.40 mm) width 핀 구성 가이드

MAX3232EIPWE4(16-tssop, 0.173 inch (4.40 mm) width 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MAX3232EIPWE4의 16-tssop, 0.173 inch (4.40 mm) width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MAX3232EIPWE4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MAX3232EIPWE4 적합 용도: 6 애플리케이션s: Industrial Serial Console, Data-Acquisition Equipment, Printer and Peripheral Interface, Instrumentation and Test Systems, Embedded Service and Configuration Port, Network Equipment Management Port.

🏭

Industrial Serial Console

The MAX3232EIPWE4 fits an industrial console port because it provides two drivers, two receivers, and 250 kbps signaling in a 16-TSSOP package. Its 3 V to 5.5 V supply range allows connection to 3.3 V or 5 V controller logic, while the -40 °C to 85 °C rating supports equipment operating across industrial temperature conditions. The ±15-kV IEC ESD protection is especially useful where the console connector is exposed to human contact or long external cables. Place the charge-pump capacitors close to the IC and connect the driver outputs to the connector through the layout arrangement recommended in the datasheet.

📟

Data-Acquisition Equipment

The MAX3232EIPWE4 can provide the RS-232 command link in data-acquisition systems that require a legacy-compatible serial interface. Its 250 kbps maximum rate is suitable for control commands, status reports, and configuration transfers rather than continuous high-volume measurement streaming. Two transmit and two receive channels allow bidirectional communication with external instruments. The device operates from 3 V to 5.5 V, simplifying interface design in mixed-voltage test equipment, while its industrial temperature range supports use in controlled factory or laboratory environments.

🖨️

Printer and Peripheral Interface

The MAX3232EIPWE4 is appropriate for legacy printer, scanner, and industrial peripheral ports that still use TIA/EIA-232-F or ITU V.28 signaling. A maximum rate of 250 kbps covers typical command and status traffic, and the integrated ±15-kV IEC ESD protection improves resilience at a connector that may be repeatedly connected and disconnected. Using one transceiver IC avoids separate driver and receiver packages. Board layout should keep the external cable-side nets away from sensitive logic traces and preserve a direct chassis-to-digital-ground strategy appropriate to the overall equipment design.

🔬

Instrumentation and Test Systems

The MAX3232EIPWE4 fits instrumentation systems requiring a robust control port beside precision measurement circuitry. Its low-voltage supply operation permits use with 3.3 V control logic, and the -40 °C to 85 °C range supports laboratory and industrial test equipment. The RS-232 interface can be used for instrument configuration and diagnostic output while keeping the physical communication layer compact in a 16-TSSOP footprint. Because the transceiver converts logic levels to bipolar RS-232 signals internally, the host controller can use conventional digital I/O without adding separate level-shifting circuitry.

🔧

Embedded Service and Configuration Port

The MAX3232EIPWE4 provides a practical service port for embedded controllers that need configuration access, diagnostic logging, or firmware recovery through RS-232. Its 2/2 arrangement supports bidirectional command sessions, and the 250 kbps rate is more than sufficient for console traffic. Operation from 3 V to 5.5 V is helpful in mixed-voltage embedded boards, while the TSSOP package saves board area compared with larger discrete transceiver implementations. The ±15-kV IEC ESD protection adds connector-level robustness for equipment deployed outside a controlled laboratory environment.

🌐

Network Equipment Management Port

The MAX3232EIPWE4 can serve as a local RS-232 management interface on network equipment that also offers newer communication protocols. The interface remains useful for installation, diagnostics, and recovery procedures using legacy terminal equipment. Its 250 kbps capability handles management commands and diagnostic output, while the 16-TSSOP footprint supports compact line cards. The 3 V to 5.5 V supply range accommodates modern 3.3 V equipment, and ±15-kV IEC ESD protection helps withstand repeated connector contact. Grounding and cable routing remain critical because external RS-232 ports can introduce large transient voltages.

추천 제품 요약

MAX3232IPWG4 Texas Instruments 사용처: Industrial Serial Console, Printer and Peripheral Interface, Embedded Service and Configuration Port, Network Equipment Management Port SN65C3232EPWG4 Pin-compatible transceiver comparison option 사용처: Industrial Serial Console, Instrumentation and Test Systems, Network Equipment Management Port MAX3232ECPWG4 Alternative 2/2 RS-232 interface candidate 사용처: Data-Acquisition Equipment, Instrumentation and Test Systems MAX3232ECPWE4 Alternative 2/2 RS-232 interface candidate 사용처: Data-Acquisition Equipment, Printer and Peripheral Interface, Embedded Service and Configuration Port
Where can I buy MAX3232EIPWE4 online?
The MAX3232EIPWE4 can be requested through the Request a Quote form on this page. The form captures the required quantity, target package suffix, and delivery expectations so the order can be reviewed for availability and sourcing. Current inventory and lead time should be confirmed when the quotation is prepared rather than assumed from catalog listings.
What is the price of MAX3232EIPWE4?
Use the Request a Quote form on this page for the current MAX3232EIPWE4 quotation. Pricing for this Texas Instruments transceiver depends on order quantity, package suffix, and supply conditions at the time of order. The structured pricing area on this page updates separately, while the quote request provides a direct route for volume pricing and delivery confirmation.
What is the lead time for MAX3232EIPWE4?
The current lead time for MAX3232EIPWE4 should be confirmed through the Request a Quote form on this page. Lead time can vary with the requested quantity and inventory position. For production planning, submit the forecast quantity and required delivery date with the quote request so availability can be evaluated against your assembly schedule.
Is MAX3232EIPWE4 in stock?
Confirm MAX3232EIPWE4 availability by submitting a quantity and target date through the Request a Quote form on this page. Inventory is a moving quantity and can differ from general catalog availability. The quotation response provides the most appropriate confirmation for the exact 16-TSSOP E-suffix ordering code and your required delivery schedule.
What is the operating voltage of MAX3232EIPWE4?
The MAX3232EIPWE4 operates from a 3 V to 5.5 V supply. According to the Texas Instruments MAX3232EIPWE4 datasheet, this range supports both 3.3 V and 5 V systems, and one product listing identifies 3.3 V as the logic supply condition. The chosen supply must also remain compatible with the external RS-232 interface requirements.
What are the key specifications of MAX3232EIPWE4 that engineers should know?
The MAX3232EIPWE4 combines two RS-232 drivers, two receivers, a 250 kbps maximum data rate, and ±15 kV IEC ESD protection in a 16-TSSOP package. Its 3 V to 5.5 V supply range and -40 °C to 85 °C operating-temperature range support industrial and commercial equipment. The device also targets TIA/EIA-232-F and ITU V.28 signaling.
What is the maximum data rate of MAX3232EIPWE4?
The MAX3232EIPWE4 supports a maximum data rate of 250 kbps. This rate is suitable for serial console, control, and instrumentation links that use RS-232 rather than mass-storage transfers. Texas Instruments describes the device as a multichannel RS-232 line driver/receiver rated to 250 kbit/s, with automatic driver shutdown and receiver enable functions.
Does MAX3232EIPWE4 support both 3.3 V and 5 V systems?
Yes, the MAX3232EIPWE4 supports a 3 V to 5.5 V supply range, covering common 3.3 V and 5 V logic systems. The manufacturer datasheet identifies the 3 V to 5.5 V operating capability, while product documentation also describes the device as a 3.3 V part. Verify the complete external interface and system grounding arrangement before integration.
What ESD protection does the MAX3232EIPWE4 provide?
The MAX3232EIPWE4 provides ±15 kV IEC ESD protection. The Texas Instruments product description identifies this as ±15-kV IEC ESD protection for the RS-232 interface. The protection is valuable on externally accessible serial ports, although system-level protection also depends on connector selection, cable handling, grounding, and enclosure design.
Where can I download the MAX3232EIPWE4 datasheet PDF?
The MAX3232EIPWE4 datasheet is linked from the datasheet section of this page, with a 17-page copy hosted at the document address shown in the datasheet field. The document covers the 3 V to 5.5 V supply operation, 2/2 transceiver configuration, 250 kbps operation, ±15-kV IEC ESD protection, pin connections, and typical application information.
Where can I find the MAX3232EIPWE4 pinout?
Use the pin-description table in the Texas Instruments MAX3232EIPWE4 datasheet when assigning PCB nets. The device is a 16-pin TSSOP and includes dedicated driver, receiver, ground, supply, charge-pump capacitor, and control connections. Consult the package drawing and pin table together to preserve the standard counter-clockwise numbering and the correct capacitor placements.
What is the difference between MAX3232EIPWE4 and MAX3232IPWG4?
The MAX3232EIPWE4 and MAX3232IPWG4 are both 16-pin TSSOP RS-232 transceivers in the same device family, and cross-reference records list them as equivalents. The E ordering option identifies the enhanced ESD-protection variant, while the suffix distinction also reflects packaging and temperature-grade ordering details. Confirm the full suffix and datasheet conditions before substituting.
What is the best drop-in replacement for MAX3232EIPWE4?
The MAX3232IPWG4 is a close same-family replacement candidate in the 16-pin TSSOP format, and cross-reference records also identify MAX3232ECPWG4 and MAX3232ECPWE4 as related equivalents. Pin compatibility should be confirmed from each candidate's datasheet before substitution, particularly for ESD rating, supply voltage, temperature range, and charge-pump capacitor requirements.
When should I choose MAX3232EIPWE4 instead of a lower-ESD transceiver?
Choose the MAX3232EIPWE4 when an externally accessible RS-232 port requires the enhanced ±15-kV IEC ESD protection and operation from 3 V to 5.5 V. A lower-protection transceiver may be adequate only when the port is protected upstream by a connector with robust discharge networks. The final choice should balance interface robustness, thermal margin, and second-source availability.
Is MAX3232EIPWE4 suitable for industrial serial console designs?
The MAX3232EIPWE4 is suitable for industrial serial console designs because it combines 250 kbps operation, a 3 V to 5.5 V supply range, and a -40 °C to 85 °C operating-temperature range. Its two transmitters and two receivers support bidirectional console and control links, while ±15-kV IEC ESD protection adds margin for exposed connector interfaces.
What can replace MAX3232EIPWE4?
The closest documented replacement options are MAX3232IPWG4, MAX3232ECPWG4, and MAX3232ECPWE4, all identified in same-family cross-reference records. These devices use the same general 16-pin TSSOP format, but a true drop-in substitution requires confirmation of pinout, supply range, ESD rating, temperature grade, and external capacitor values in the manufacturer datasheets.
How do I design the layout for MAX3232EIPWE4?
Place the charge-pump capacitors close to their designated pins and route cable-side driver outputs directly toward the RS-232 connector. Keep receiver inputs away from noisy switching nodes, preserve a low-impedance ground path, and follow the datasheet layout guidance for the charge-pump network. The 16-TSSOP package also requires a thermal-pad-free land pattern with adequate solder and assembly clearance.

엔지니어링 참조 데이터: MAX3232EIPWE4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MAX3232EIPWE4 when the design needs a 2/2 RS-232 interface, 3 V to 5.5 V operation, 250 kbps throughput, -40 °C to 85 °C industrial-temperature support, and ±15-kV IEC ESD protection on an exposed serial port. Choose MAX3232IPWG4 when its lower ESD-protection level is acceptable and the standard family option better fits sourcing requirements. Choose MAX3232ECPWG4 or MAX3232ECPWE4 when the cross-reference family documents their ordering conditions align with the intended supply, temperature, and packaging configuration. Consider SN65C3232EPWG4 only after its pinout, data rate, protection, and receiver-threshold data are verified against the target design. For every substitution, confirm the charge-pump capacitor values and PCB footprint because a shared package name alone does not guarantee identical peripheral circuitry or protection behavior.

대체품과의 비교

파라미터 이 제품 MAX3232IPWG4 MAX3232ECPWG4 MAX3232ECPWE4 SN65C3232EPWG4
Package 16-TSSOP 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same 16-TSSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

주요 차별점

  • Enhanced IEC ESD protection (vs MAX3232IPWG4)
  • Industrial-temperature 2/2 transceiver (vs SN65C3232EPWG4)
  • Low-voltage system compatibility (vs MAX3232ECPWE4)

설계 노트

Place the charge-pump capacitors and their associated traces directly beside the pins identified in the Texas Instruments datasheet. Keep these switching paths compact and away from receiver inputs and sensitive analog circuitry. Route the two driver outputs toward the external connector without long shared segments that could couple noise between ports.

Do not assume that every MAX3232 suffix has identical protection or temperature conditions. The E ordering option is associated with ±15-kV IEC ESD protection, while other family members can use different suffixes and protection levels. Confirm the complete ordering code, pinout, charge-pump capacitor values, and external component requirements before approving a substitution.

Provide a low-impedance ground plane connection and evaluate the relationship between board ground and connector shield according to the system grounding strategy. RS-232 receivers tolerate bipolar input signals, but poor grounding can increase errors and noise sensitivity. Place connector-side surge or ESD components where their transient current can return through a short, defined path.

The 250 kbps rating is adequate for control and diagnostic links but does not make the interface suitable for high-speed file transfer. Preserve the recommended charge-pump and bypass-capacitor layout, and avoid long stubs from the transceiver to the connector. If higher data rates are required, select an RS-232 transceiver explicitly rated for the target throughput.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Texas Instruments describes the MAX3232E family as qualified for automotive applications, but a specific AEC-Q100 grade and formal RoHS, REACH, lead-free, halogen-free, or conflict-minerals status were not stated in the available product information.

데이터 검증일: 2026-11-09 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MAX3232EIPWE4 MAX3232EIPWE4 datasheet MAX3232EIPWE4 datasheet pdf MAX3232EIPWE4 pinout MAX3232EIPWE4 equivalent MAX3232EIPWE4 replacement MAX3232EIPWE4 cross reference MAX3232EIPWE4 vs MAX3232IPWG4 Texas Instruments MAX3232EIPWE4 MAX3232EIPWE4 16-TSSOP MAX3232EIPWE4 250kbps RS-232 MAX3232EIPWE4 industrial application MAX3232EIPWE4 price MAX3232EIPWE4 stock

관련 부품 & 용어

Texas Instruments MAX3232EIPWE4 MAX3232IPWG4 MAX3232ECPWG4 MAX3232ECPWE4 SN65C3232EPWG4 RS-232 TIA/EIA-232-F ITU V.28 line driver line receiver RS-232 transceiver interface IC charge-pump voltage converter 250 kbps data rate 3 V to 5.5 V supply ±15 kV IEC ESD protection 16-TSSOP package surface-mount package industrial serial communication bidirectional serial port external connector RoHS REACH AEC-Q100
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기