MAX335CNG+ - 8-Channel 150Ω SPST Analog Switch | ADI
부품 번호: MAX335CNG+ ✓ 활성MAX335CNG+ 개요
An analog switch is a semiconductor that routes analog or digital signals between circuit nodes under electronic control. The MAX335CNG+ belongs to the analog switch and multiplexer hierarchy, where it sits between interface ICs and external signal paths. Its serial digital control reduces the number of logic connections required for eight switch channels, making it useful when a system needs multiple analog lines switched by a microcontroller or embedded processor.
The MAX335 offers separate control for all eight SPST switches, symmetrical bidirectional conduction, and nearly constant on-resistance across the analog signal range. These characteristics help preserve signal amplitude and simplify input-impedance calculations. Its serial interface also supports compact designs in instrumentation, industrial control, test equipment, data acquisition, and communication equipment where individual control lines for every channel would consume too many connector or processor pins.
According to the manufacturer datasheet, the MAX335 is designed for a broad range of positive and negative supply voltages, making it suitable for industrial signal levels as well as lower-voltage systems. Because the switch resistance remains substantially constant over the analog signal range, engineers can use a consistent resistance model during signal-chain design. The serial control architecture reduces routing complexity while retaining independent access to every switched channel.
Typical uses include multiplexed sensor acquisition, programmable gain and filter networks, automated test systems, channel routing in communication equipment, and analog signal isolation. In each case, the MAX335 can place one of two external signals onto a common internal path or disconnect that path when higher impedance is required. The through-hole PDIP-24 package is particularly convenient for prototypes and legacy industrial boards that use socketed or manually assembled components.
For reliable layouts, route each switched signal away from the serial clock and data traces, provide a stable ground reference, and keep copper paths short to minimize added resistance and parasitic capacitance. Confirm the supply rails, logic levels, and absolute maximum ratings in the manufacturer datasheet before applying the device to high-voltage signals. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks or making board-level substitutions.
This page combines manufacturer specifications, package and interface details, drop-in family options, comparison parameters, and practical design guidance to support component selection, schematic review, PCB implementation, and legacy-board maintenance.
드롭인 대체품: MAX335CNG+ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MAX335CPA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335CNA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335EPA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335ENA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335CUA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335EUA+
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MAX335CNG+ 최대 정격 & 전기적 특성
| Number of Switches | 8 switches |
| Switch Configuration | 1:1 SPST |
| Maximum On-Resistance | 150 Ω |
| Typical On-Resistance | Approximately 100 Ω |
| Positive Supply Range | +4.5 V to +20 V |
| Negative Supply Range | -4.5 V to -20 V |
| Control Interface | Serial digital interface |
| Control Method | 8 independently controlled SPST switches |
| Signal Conduction Direction | Bidirectional |
| 패키지 | 24-pin PDIP |
| 실장 유형 | Through-hole |
| 핀 수 | 24 pins |
MAX335CNG+ 24-pin pdip 핀 구성 가이드
MAX335CNG+(24-pin pdip 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX335CNG+.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX335CNG+ 적합 용도: 6 애플리케이션s: Multiplexed Sensor Acquisition, Automated Test Equipment, Programmable Gain and Filter Networks, Industrial Control Signal Routing, Communication Equipment Channel Isolation, Data Acquisition Front Ends.
Multiplexed Sensor Acquisition
The MAX335CNG+ can route outputs from several sensors into a shared amplifier or data-conversion channel while keeping each SPST path independently controllable through the serial interface. Its approximately 100Ω typical and 150Ω maximum on-resistance is practical for many medium-impedance sensors, although high-impedance sources require an input-buffer calculation. Eight channels reduce the host-controller pin burden, while bidirectional conduction simplifies routing around sensor polarity or excitation sources.
추천
Automated Test Equipment
The MAX335CNG+ is useful in automated test systems that must connect test signals to multiple instrument channels under software control. Its eight SPST switches support independent signal-path selection, and the serial command interface reduces the number of host-processor connections needed for fixture routing. With a 150Ω maximum on-resistance, the device is best placed where that resistance does not dominate the accuracy budget or where the selected channel is followed by a high-input-impedance amplifier.
추천
Programmable Gain and Filter Networks
The MAX335CNG+ can select resistors, capacitors, or signal branches within programmable analog networks because each SPST channel is independently controlled. Approximately 100Ω typical on-resistance can be treated as a predictable series resistance in many filter and gain-control paths, while the 150Ω maximum value should be checked against the gain error and settling requirements. Serial control permits the network to be reconfigured without dedicating multiple parallel data buses or discrete relay drivers.
추천
Industrial Control Signal Routing
The MAX335CNG+ can route control or measurement signals between industrial circuit sections when the system supports analog levels within ±4.5V to ±20V. Its eight independently controlled channels allow software to select equipment paths, bypass paths, or test points without multiple discrete relay packages. Bidirectional conduction is useful for shared buses and bidirectional interfaces, but common-mode limits, off-state isolation, and the approximately 150Ω maximum insertion resistance must remain within the application budget.
추천
Communication Equipment Channel Isolation
The MAX335CNG+ can isolate or reconnect analog sections of a communication module while its serial interface provides compact control over eight routes. Bidirectional SPST paths suit shared signal lines and direction-independent test paths. The device's resistance is acceptable for many low- and medium-impedance signal stages, but designers should include the approximately 100Ω typical and 150Ω maximum resistance in link-budget calculations and should isolate the serial bus from sensitive analog traces.
추천
Data Acquisition Front Ends
The MAX335CNG+ can front-end a data-acquisition board by selecting among several conditioned input channels before they reach an amplifier or converter. Serial control allows the host to change routes rapidly while avoiding eight dedicated switching-control lines. Its low typical resistance preserves signal amplitude in many systems, although the 150Ω maximum value can affect high-impedance sources. Place the device close to the amplifier input and keep the switched traces short to limit added capacitance and crosstalk.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX335CNG+ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX335CPA+ | MAX335CNA+ | MAX335EPA+ | MAX335ENA+ | MAX335CUA+ |
|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | PDIP-24 | PDIP-24 | PDIP-24 | PDIP-24 | PDIP-24 | PDIP-24 |
| Number of Channels | 8 | 8 | 8 | 8 | 8 | 8 |
| Switch Configuration | 8-channel SPST | 8-channel SPST | 8-channel SPST | 8-channel SPST | 8-channel SPST | 8-channel SPST |
| Control Interface | Serial digital interface | Serial digital interface | Serial digital interface | Serial digital interface | Serial digital interface | Serial digital interface |
| Signal Conduction | Bidirectional | Bidirectional | Bidirectional | Bidirectional | Bidirectional | Bidirectional |
| Mounting Style | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole | Through-hole |
주요 차별점
- Eight independently controlled SPST channels with one serial interface (vs MAX335EWG+T)
- Through-hole PCB compatibility (vs MAX335CWG+T)
- Bidirectional switching with substantially constant resistance (vs MAX335CPA+)
설계 노트
Do not substitute the SOIC-24 MAX335EWG+T or MAX335CWG+T directly for the PDIP-24 MAX335CNG+. Although the MAX335 family shares its eight-channel serial-control architecture, a surface-mount package is not pin-compatible with a through-hole board. For a legacy PCB, retain a 24-pin PDIP alternative and verify the pin-description table, operating-temperature grade, supply range, and electrical limits for the exact suffix before releasing the substitution.
Include the approximately 100Ω typical and 150Ω maximum switch resistance in the signal-chain gain and attenuation calculation. This is especially important for high-impedance sensors and divider networks, where the switch can become a meaningful percentage of the source impedance. Keep switched traces short, use a nearby low-impedance amplifier or buffer when required, and avoid placing the switching element immediately before a high-gain node susceptible to charge injection.
Route the serial clock and data traces away from the eight analog paths, and maintain a continuous ground reference beneath and around the device. Keep the logic interface away from sensitive switched inputs to reduce capacitive coupling. Follow the pin-description table in the manufacturer datasheet when assigning tracks, and check that the through-hole pin numbering matches the package orientation shown on the official drawing.
Decouple the positive and negative analog supplies close to the device pins using the capacitance and layout values specified in the manufacturer datasheet. Because the MAX335 supports bipolar operation, both supply rails require local stability and adequate return paths. Keep supply and ground connections away from switched-signal traces, and account for input voltage, logic-level, and absolute-maximum constraints when the external source exceeds the nominal ±4.5V to ±20V range.
규정 준수 정보
Compliance status requires confirmation from the manufacturer product page or current manufacturer declarations for the exact MAX335CNG+ ordering code.