MAX3385ECAP-T - 250kbps RS-232 IC | Analog Devices
부품 번호: MAX3385ECAP-T ✓ 활성MAX3385ECAP-T 개요
A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. The MAX3385ECAP-T belongs to the RS-232 transceiver family within interface ICs, where it sits between a host controller or data-processing system and a cable-based peripheral. Unlike a single-direction line driver or receiver, the integrated transceiver supports both transmission and reception while limiting the number of external interface components.
The MAX3385ECAP-T supports supply voltages from 3.0V to 5.5V, making it suitable for systems that operate from either 3.3V or 5V logic rails. Its stated maximum signaling rate is 250kbps, which provides sufficient bandwidth for common point-to-point control, instrumentation, industrial, and data-acquisition links. The integrated 15kV ESD protection is a principal feature for interfaces connected to external cables, where electrostatic discharge can enter through a connector and damage an unprotected transceiver.
This device is identified as a 2/3 transceiver, meaning that two driver channels and three receiver channels are available for asymmetric RS-232 links. The manufacturer datasheet describes the MAX3385ECAP as a low-power true RS-232 transceiver for 3.0V to 5.5V operation. Its SSOP-20 package provides a compact surface-mount format, while the -T ordering suffix identifies the tape-and-reel shipping form associated with this exact manufacturer part number.
Typical uses include industrial control links, test and measurement equipment, data-logging systems, point-of-sale equipment, and embedded serial interfaces. The combination of a 250kbps data rate and multiple receiver channels is particularly useful where one controller must monitor several incoming RS-232 signals while transmitting command or status data through another channel. External charge-pump capacitors and connector protection arrangements should follow the pin-description and typical-application diagrams in the manufacturer datasheet.
Designers should verify that the system ground and signal-return arrangement satisfy the RS-232 interface requirements before placing the IC. The maximum cable length and achievable rate depend on the complete transceiver circuit, cable impedance, connector, noise environment, and system baud rate; the 250kbps figure is the device rating rather than a guarantee for every installed link. Decoupling and charge-pump routing should follow the recommended layout because switching-regulator and charge-pump currents can couple into sensitive signal paths.
This product page consolidates the exact MAX3385ECAP-T electrical ratings, package information, interface characteristics, sourcing path, and engineering guidance into one reference. It also distinguishes confirmed pin-compatible replacements from merely similar RS-232 transceivers, helping designers avoid assuming that equivalent protocol functions guarantee PCB-level drop-in compatibility.
드롭인 대체품: MAX3385ECAP-T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ISL83385ECA-T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3385ECAP-T 사양
| Device Type | RS-232 transceiver |
| Driver and Receiver Configuration | 2/3 (two drivers and three receivers) |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | 15kV |
| Power Classification | Low power |
| 동작 온도 범위 | 0C to 70C |
| 패키지 | 20-pin SSOP |
| Terminal Count | 20 terminals |
| 실장 유형 | Surface mount |
| Lead Form | Gull wing |
| Temperature Grade | Commercial |
MAX3385ECAP-T 20-pin ssop 핀 구성 가이드
MAX3385ECAP-T(20-pin ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3385ECAP-T.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3385ECAP-T 적합 용도: 6 애플리케이션s: Industrial Controller RS-232 Link, Data-Acquisition Equipment, Test and Measurement Instruments, Point-of-Sale and Service Terminal, Embedded Serial Communication, RS-232 Port Expansion.
Industrial Controller RS-232 Link
The MAX3385ECAP-T fits a controller that must transmit commands while monitoring several incoming status signals through one compact RS-232 interface. Its two-driver, three-receiver arrangement supports asymmetric control links, while the 250kbps maximum rate is appropriate for moderate-speed telemetry and configuration traffic. A 3.0V-to-5.5V supply range allows operation from either 3.3V or 5V logic environments. Place the device near the connector, follow the manufacturer charge-pump layout, and route protected RS-232 lines away from sensitive digital signals. The commercial 0C-to-70C rating should be checked against the controller enclosure's actual ambient-temperature range.
Data-Acquisition Equipment
A data-acquisition system can use the MAX3385ECAP-T to connect a host controller to a remote instrument over RS-232. The 250kbps capability supports command polling and sampled status updates when the complete cable and grounding system are appropriate. Two transmitters can carry separate control channels, while three receivers can monitor acknowledgements or auxiliary device states. The 15kV ESD protection is valuable when the cable reaches an external connector, although layout and grounding remain essential. Because the operating range is 0C to 70C, the device is best suited to room-temperature laboratory, industrial enclosure, or monitored control equipment unless a wider-temperature part is selected.
Test and Measurement Instruments
The MAX3385ECAP-T is appropriate for test and measurement instruments that expose a legacy RS-232 control port to an external service connector. Its 250kbps rate accommodates instrument command and response traffic, while the two-driver and three-receiver arrangement allows status and trigger information to be managed concurrently. The 3.0V-to-5.5V operating range supports both 3.3V and 5V instrument architectures, and 15kV ESD protection helps the interface withstand discharge encountered during equipment connection. Implement the datasheet's charge-pump capacitor and grounding arrangement carefully to minimize noise coupling into precision internal circuits and preserve reliable operation across the full interface cable.
Point-of-Sale and Service Terminal
A point-of-sale terminal can use the MAX3385ECAP-T for a compact RS-232 connection to a scanner, printer, customer-display unit, or service accessory. The low-power 3.0V-to-5.5V transceiver is compatible with common embedded logic rails, and its 250kbps rate covers common peripheral transactions. Two transmit channels and three receive channels can reduce the number of separate interface ICs when several low-speed accessories are connected. The 15kV ESD rating is useful at accessible external connectors, but designers should still provide proper signal and chassis-ground planning, maintain recommended charge-pump spacing, and confirm that all connected peripherals use compatible RS-232 voltage levels.
Embedded Serial Communication
The MAX3385ECAP-T can bridge an embedded controller's logic-level serial signals to an RS-232 port in industrial control, communications, or embedded-processing equipment. Its 2/3 configuration is useful when command traffic flows in one direction while acknowledgements or diagnostic inputs arrive through separate receivers. The 250kbps maximum signaling rate is sufficient for many supervisory and configuration protocols. A designer should budget for the external charge-pump capacitors, maintain short return paths, and separate switching or high-current return currents from the RS-232 signal traces. The 0C-to-70C commercial range must remain within the system enclosure's temperature budget.
RS-232 Port Expansion
Systems with several low-speed RS-232 lines can use the MAX3385ECAP-T to consolidate related communication functions into one interface IC. Two drivers and three receivers provide more channel density than a single-direction transceiver while retaining a maximum rate of 250kbps. This arrangement is useful in monitoring and control equipment where one host communicates with several subordinate devices or receives multiple status inputs. The 20-pin SSOP package supports compact board placement, but the design must preserve the manufacturer's recommended capacitor configuration, adequate grounding, and controlled external routing. Cable reach and usable baud rate must be validated with the actual connector and wiring.
엔지니어링 참조 데이터: MAX3385ECAP-T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221E | MAX3232E | MAX3241E |
|---|---|---|---|---|
| Device Function | True RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
주요 차별점
- Asymmetric 2/3 channel arrangement supports concurrent transmission and monitoring (vs MAX3221E)
- 250kbps maximum data rate supports moderate-speed serial links (vs MAX3232E)
- 15kV ESD protection is specified for exposed interface lines (vs MAX3241E)
설계 노트
Route the MAX3385ECAP-T charge-pump and charge-pump-capacitor connections exactly as shown in the manufacturer datasheet. Keep these high-current paths compact and away from RS-232 receiver inputs and sensitive analog circuitry. Place the device close to the connector-side protection network, maintain a direct signal-ground return, and avoid sharing narrow ground paths with motors, relays, or switching-power-converter returns.
Treat the external RS-232 conductors as discharge-prone signal paths. Use the manufacturer-recommended series resistance and protection components where specified, and route each protected line directly toward the corresponding transceiver pin without unnecessary stubs. Confirm that connector shells and signal grounds follow the application's ESD strategy, and keep high-current return paths spatially separate from the receiver side of the interface.
Do not assume that another RS-232 transceiver with similar headline specifications is PCB-compatible. The MAX3385ECAP-T is a 2/3 device in a 20-pin SSOP, and candidate replacements can differ in pin numbering, channel arrangement, capacitor requirements, and package dimensions. Before substitution, compare every numbered terminal, supply range, receiver threshold, and charge-pump connection against the manufacturer datasheet and perform a hardware signal-integrity review.
Decouple the transceiver supply close to its supply and ground pins and follow the manufacturer capacitance recommendation. The listed 3.0V-to-5.5V range supports 3.3V and 5V systems, but the complete design must also account for startup behavior, charge-pump loading, and supply tolerance. Confirm the worst-case supply-current condition from the datasheet when sizing the regulator and local bypass network.
규정 준수 정보
The component is identified as a commercial-temperature RS-232 transceiver, and no AEC-Q100 qualification is indicated. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require current manufacturer documentation.