onsemi

MC14052BD - 2:4 Analog Multiplexer, 280 Ohm | onsemi

부품 번호: MC14052BD ✓ 활성
3 V to 18 V Vdss 280 ohm Rds(on) 16-pin SOIC Package
MOQ: 1 |

MC14052BD 개요

The onsemi MC14052BD is a dual 2:4 analog multiplexer and demultiplexer with an integrated address decoder, presented in a 16-pin SOIC package. Its principal characteristics include two independently controlled analog channels, 280 ohm on-resistance, and a 3 V to 18 V supply range. The device is designed for selecting or routing one of four analog inputs to a common output, or using the same structure in a demultiplexing arrangement. According to the MC14052BD manufacturer datasheet, it is a pin-for-pin replacement for the CD4051, CD4052, and CD4053 functions, although the MC14052B is specifically the dual 2:4 version.

An analog multiplexer is an analog switch matrix controlled by digital logic. It allows a microcontroller, test system, or data-acquisition circuit to reuse a limited number of converter inputs, sensor inputs, or instrumentation amplifiers across several analog signals. The address decoder accepts binary select inputs and connects the corresponding analog path, while the enable input provides a common operating control. This category belongs to the interface IC hierarchy: analog multiplexer -> analog switch -> interface IC -> semiconductor.

The MC14052BD operates from 3 V to 18 V and offers approximately 12 nV/sqrt(Hz) noise performance at frequencies of 1 kHz and above. Its 280 ohm typical on-resistance is suitable for medium-impedance analog networks rather than applications demanding sub-ohm precision resistance. Low-noise switching is particularly valuable when the mux sits close to a high-gain amplifier, where resistance-generated Johnson noise and switch leakage can affect the measurement floor.

Typical uses include multimeter and oscilloscope input selection, data-acquisition systems, battery-cell monitoring, audio routing, sensor multiplexing, and industrial control interfaces. Because the selected channel introduces on-resistance, capacitance, leakage, and settling behavior, the complete signal path should be evaluated with the source impedance and required measurement bandwidth. Place the device close to the protected analog node and use a high-impedance buffer after the common output when the source impedance is high.

For robust layouts, keep the selected signal traces short, return unused or disabled inputs to a defined potential, and place the device power pin close to a stable bypass capacitor. The enable function must be controlled so that unused analog paths cannot float above the active device supply. Although the broad supply range supports both 5 V and higher-voltage analog systems, logic thresholds should be checked against the controlling device.

This product page combines package, routing, selection, and drop-in replacement information with practical guidance for analog switching. It compares confirmed pin-compatible candidates and explains the electrical limits that should be checked before replacing a multiplexer in an existing board.

드롭인 대체품: MC14052BD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MC14052BD (동일 폼 팩터 및 풋프린트) — 차이점: Multiplexer Configuration, Noise Density, Package.

onsemi
Multiplexer Configuration: Dual 4:1 configuration
Noise Density: 12 nV/sqrt(Hz) at 1.0 kHz and above
Package: 16-pin SO EIAJ surface-mount package
비교 대상: MC14052BD →

MC14052BF

✅ 드롭인
onsemi
📦 SOIC-16
Dual 4:1 differential analog multiplexer, 2 circuits · 2 circuits · Dual 4:1 configuration · 280 ohm · 12 nV/sqrt(Hz) at 1.0 kHz and above · 16 pins · 16-pin SO EIAJ surface-mount package · Surface mount

가격 문의

데이터시트 보기 →

NLV14052BDG

✅ 드롭인
📦 SOIC-16
Same dual 2:4 function, terminals, and 16-SOIC package; exact on-resistance and switching-speed differences require confirmation

📋 참조 대체품 (카탈로그에 없음)

MC14052BDG

✅ 드롭인
📦 SOIC-16
Same MC14052B function and 16-SOIC electrical configuration; differs by the manufacturer packaging suffix rather than a substantive routing specification

📋 참조 대체품 (카탈로그에 없음)

MC14052BD 사양

Multiplexer Configuration Dual 2:4 analog multiplexer/demultiplexer
Number of Circuits 2 circuits
On-Resistance 280 ohm
Supply Voltage Range 3 V to 18 V
패키지 16-pin SOIC
핀 수 16 pins
실장 유형 Surface mount
노이즈 밀도 12 nV/sqrt(Hz) at f greater than or equal to 1.0 kHz
Switching Function 4-pole double-throw analog switching
Control Interface Digital select and enable control
Pb-Free Availability Pb-free packages are available
RoHS 상태 RoHS compliant

MC14052BD 16-pin soic 핀 구성 가이드

MC14052BD(16-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MC14052BD의 16-pin soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC14052BD.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC14052BD 적합 용도: 6 애플리케이션s: Data Acquisition Channel Selection, Precision Multimeter Input Multiplexing, Sensor Signal Conditioning, Industrial Control Signal Routing, Audio and Low-Level Signal Routing, Battery Cell Monitoring.

🖥️

Data Acquisition Channel Selection

The MC14052BD is appropriate for routing a group of analog inputs into a shared converter or amplifier channel when a board can benefit from a dual 2:4 arrangement. Its two independent switch sections allow two banks of four inputs to be selected under separate address combinations, conserving analog front-end resources while retaining a compact 16-pin SOIC footprint. The 280 ohm on-resistance must be included in the source-loading analysis, particularly for sensors with high output impedance. Low noise of approximately 12 nV/sqrt(Hz) at 1 kHz and above is useful near the input stage. Place the mux close to the signal sources, use short traces, and allow the selected channel to settle before acquisition.

🔧

Precision Multimeter Input Multiplexing

The MC14052BD can organize multiple measurement inputs in a digital multimeter or bench instrument by selecting among four signals on each of two channels. This reduces the number of dedicated analog paths reaching the measurement amplifier while retaining the logic control needed for range and source selection. Its approximately 12 nV/sqrt(Hz) low-noise characteristic is valuable when the selected source feeds a high-gain amplifier. The 280 ohm on-resistance can create input loading and channel-settling effects, so source impedance, protection-network capacitance, and required measurement bandwidth should be evaluated together. A buffered output may be preferable when driving a high-impedance precision amplifier.

🧩

Sensor Signal Conditioning

The MC14052BD can route temperature, pressure, strain, or resistance-based sensor outputs into a common conditioning amplifier when the system requires more analog inputs than the amplifier can accept directly. Two switch sections support a dual 2:4 organization, which can pair related sensor groups and simplify control firmware. The mux's low-noise specification helps when the selected signal is amplified immediately afterward, but the 280 ohm on-resistance may create an appreciable divider with a high-impedance sensor. Minimize trace length, keep the switching stage away from fast digital nodes, and confirm the amplifier's input bias and settling requirements. Use a dedicated buffer when source impedance is too high.

🏭

Industrial Control Signal Routing

The MC14052BD is useful in industrial control equipment that must route several low-frequency analog command or feedback signals through a common interface. Its 3 V to 18 V operating range supports multiple supply arrangements, and the integrated address decoding reduces the number of separate control lines required by the host controller. Because industrial environments can contain substantial electrical noise, the selected traces should remain away from switching power nodes and motor-control traces. The device can process analog or logic-level signals within its published operating limits, but the controlling logic must not exceed the device supply. Confirm operating-temperature requirements and add protection where exposed connectors allow transient or out-of-range voltages.

🎧

Audio and Low-Level Signal Routing

The MC14052BD can route low-level audio or control signals where a system requires two independent 2:4 selection networks rather than a single 8:1 bank. The approximately 12 nV/sqrt(Hz) noise density above 1 kHz supports low-level routing, although the 280 ohm on-resistance will interact with the load impedance and can produce level-dependent attenuation. Avoid driving the mux with very high source impedances and place a buffer after it when the next stage requires low loading. Keep the routing path short, decouple the supply locally, and isolate the analog traces from clock and high-current return paths. Verify channel-to-channel matching and settling requirements in the end application.

⚡

Battery Cell Monitoring

The MC14052BD can serve as an analog selection element in multi-cell battery-monitoring equipment, particularly where the design compares two groups of monitored voltages through shared conversion hardware. The dual 2:4 topology allows compact address control and reduces the analog routing component count. However, a battery-monitoring system must place the multiplexer where its 280 ohm on-resistance and leakage do not degrade measurement accuracy, and the common output must remain within the monitored voltage range or be appropriately protected. Use a high-impedance buffer after the selected node, maintain a defined reference on disabled inputs, and verify the complete cell-voltage range against the device's absolute maximum ratings.

추천 제품 요약

CD4052 Pin-for-pin CD4052 function identified by the manufacturer datasheet 사용처: Data Acquisition Channel Selection, Precision Multimeter Input Multiplexing, Audio and Low-Level Signal Routing, Battery Cell Monitoring MC14052BF onsemi 사용처: Data Acquisition Channel Selection, Sensor Signal Conditioning, Audio and Low-Level Signal Routing, Battery Cell Monitoring MC14052BDG Equivalent onsemi 16-SOIC routing configuration 사용처: Precision Multimeter Input Multiplexing, Industrial Control Signal Routing CD4051 Related pin-for-pin-compatible CMOS analog switching family 사용처: Sensor Signal Conditioning NLV14052BDG Pin-compatible 16-SOIC candidate for a second sourcing path 사용처: Industrial Control Signal Routing
What is the MC14052BD and what does it do?
The MC14052BD is a dual 2:4 analog multiplexer and demultiplexer with an integrated digital address decoder. It uses two analog channels to route four signals per channel toward a common output, and it operates from 3 V to 18 V in a 16-pin SOIC package. According to the onsemi MC14052BD datasheet, the device provides a 280 ohm typical on-resistance and approximately 12 nV/sqrt(Hz) noise density at 1 kHz and above.
Where can I download the MC14052BD datasheet PDF?
The MC14052BD datasheet PDF is available through the onsemi documentation link and the manufacturer-hosted copy indexed by All Data Sheet. The document identifies the device as a dual 2:4 analog switch in a 16-pin SOIC package and includes its electrical characteristics, transfer behavior, and application information. Use the manufacturer datasheet as the controlling document for pin assignment, operating limits, and dynamic switching characteristics before finalizing a PCB design.
Where can I find the MC14052BD pinout?
The MC14052BD pin assignment is shown in the pin-configuration section of the onsemi MC14052BD datasheet. The device is supplied in a 16-pin SOIC package and includes select-control, enable, common-output, and analog-channel connections. Assign the board tracks directly from the numbered manufacturer pin diagram and verify the schematic net names against that diagram rather than relying on a generic CD4052 drawing.
What is the on-resistance of the MC14052BD?
The MC14052BD has a listed typical on-resistance of 280 ohm. This value makes it appropriate for routing medium-impedance analog signals rather than low-resistance precision-measurement networks. According to the MC14052BD manufacturer datasheet, the device also has low noise of approximately 12 nV/sqrt(Hz) for frequencies at or above 1 kHz, which helps preserve small-signal integrity when a buffer follows the mux.
What supply voltage does the MC14052BD require?
The MC14052BD operates from 3 V to 18 V. Its digital address and enable inputs are controlled from that same supply domain, so the controller's logic levels must remain compatible with the selected operating voltage. The manufacturer datasheet should be consulted for the exact input thresholds, quiescent current, and absolute maximum ratings at each supply point before the control signals are connected.
Is the MC14052BD a drop-in replacement for CD4052?
The MC14052BD is identified by the onsemi datasheet as a pin-for-pin replacement for the CD4051, CD4052, and CD4053 functions. For a CD4052 board, it provides the corresponding dual 2:4 routing function in the same 16-pin SOIC footprint. Before substitution, confirm that the original part was the dual 2:4 version and verify supply, logic thresholds, on-resistance, leakage, and switching-speed requirements against the new device.
What is the best drop-in replacement for MC14052BD?
The MC14052BF is a documented same-manufacturer replacement for MC14052BD in the 16-pin SOIC package, with the terminals and package stated to be consistent. NLV14052BDG is another same-package, pin-compatible candidate identified by a manufacturer comparison. The most reliable replacement decision is based on matching the exact mux function, supply range, control logic, on-resistance, leakage, and switching speed rather than package alone.
MC14052BD vs NLV14052BDG: which is better?
The MC14052BD and NLV14052BDG are both identified as 16-SOIC devices with consistent terminal and package arrangements, making NLV14052BDG a candidate drop-in replacement. Selection should follow the complete electrical comparison: 3 V to 18 V operation, 280 ohm on-resistance, digital control levels, leakage, switching speed, and temperature range. Choose the device whose published limits satisfy the existing board without changing its interface or timing assumptions.
When should I choose MC14052BD over MC14051BD?
Choose the MC14052BD when the circuit requires a dual 2:4 analog multiplexer, meaning two independent groups of four channels. The MC14051BD is associated with an 8:1 single-channel function, so it is not an electrically equivalent substitute even if its control architecture is similar. The choice must follow the required channel count, common-output arrangement, routing matrix, and pin configuration rather than only the shared MC1405x family name.
Is MC14052BD suitable for sensor multiplexing?
The MC14052BD is suitable for medium-impedance sensor multiplexing when its 280 ohm on-resistance and switching characteristics meet the measurement accuracy and bandwidth requirements. The low-noise specification of approximately 12 nV/sqrt(Hz) at 1 kHz and above is beneficial when the mux is placed close to a high-gain sensor amplifier. Place the mux near the sensors, use short traces, and account for settling after changing the selected channel.
How do I use the MC14052BD enable input?
The MC14052BD enable input provides a common control for its analog switching network and supports orderly selection or isolation of the routed signals. Drive it from a logic source that remains valid across the device's 3 V to 18 V operating range, and do not allow it to float. The manufacturer datasheet's truth table should be used to confirm the active level and the relationship between enable and the address-select inputs.
Where can I buy MC14052BD online and check current lead time?
Use the Request a Quote form on this page to request current MC14052BD availability, lead time, and a quotation for the exact 16-pin SOIC ordering code. The onsemi availability page updates inventory and market lead time dynamically, so a dated copy can become inaccurate. Confirm the requested suffix, shipping quantity, and destination country before approving the order.
What is the current price of MC14052BD?
Use the Request a Quote form on this page for the current MC14052BD quotation, quantity breaks, and lead time. Pricing depends on order quantity, package suffix, market conditions, and current channel availability, so it should not be inferred from generic multiplexer listings. Include the exact target MPN MC14052BD and required shipment quantity in the request.
Is MC14052BD in stock?
Current MC14052BD stock should be confirmed through the Request a Quote form on this page before a purchase order is scheduled. The onsemi availability page is described as updating inventory and market lead time daily, while market conditions can change without notice. Request the exact MPN, quantity, and delivery location for a current allocation response.
What are the key specifications of MC14052BD that engineers should know?
The principal MC14052BD specifications are a dual 2:4 routing configuration, 280 ohm typical on-resistance, a 3 V to 18 V supply range, approximately 12 nV/sqrt(Hz) noise density at 1 kHz and above, and a 16-pin SOIC package. The onsemi datasheet also identifies pin-for-pin compatibility with the relevant CD4051, CD4052, and CD4053 functions. Design reviews should additionally verify leakage, switching time, temperature limits, and logic thresholds from the detailed datasheet.

엔지니어링 참조 데이터: MC14052BD — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MC14052BD when the design requires a dual 2:4 analog multiplexer in a 16-pin SOIC package and operates from 3 V to 18 V. Consider MC14052BF when the same function and footprint are needed but lower on-resistance is valuable; its listed 100 ohm resistance can reduce loading from high-impedance sources. NLV14052BDG is a candidate when a second onsemi 16-SOIC sourcing path is desired, provided its detailed electrical and temperature limits pass the same review. MC14052BDG offers an equivalent routing configuration for purchasing or design review. None of these options should replace a single-channel 8:1 mux or a 4:1 device, because their channel matrices differ. For any substitution, verify pin orientation, enable polarity, address truth table, logic thresholds, leakage, switching time, on-resistance, supply range, and operating temperature rather than relying on package appearance alone.

대체품과의 비교

파라미터 이 제품 MC14052BF NLV14052BDG MC14052BDG
Brand onsemi onsemi onsemi onsemi
Package SOIC-16 SOIC-16 - same package SOIC-16 - same package SOIC-16 - same package
Multiplexer Configuration Dual 2:4 Dual 2:4 Dual 2:4 Dual 2:4
Number of Circuits 2 circuits 2 circuits 2 circuits 2 circuits

주요 차별점

  • Lower published on-resistance than MC14052BF (vs MC14052BF)
  • Documented same-package replacement family (vs NLV14052BDG)
  • Functionally aligned 16-SOIC sourcing option (vs MC14052BDG)

설계 노트

Treat the selected analog path as a resistance-capacitance network rather than an ideal wire. The MC14052BD's 280 ohm on-resistance can attenuate a high-impedance source, while parasitic capacitance and the following amplifier can determine settling time. Place the multiplexer close to the source, keep the common output trace short, and place the first high-impedance buffer immediately after the mux. Re-measure settling with the actual source impedance, cable capacitance, and selected channel.

Route the common outputs and selected analog inputs away from clock, switching-regulator, and relay-control traces. Connect the device supply to a local bypass capacitor placed close to the power pin, with a short return path to the ground reference used by the analog network. Maintain a continuous ground reference beneath the SOIC where practical, and check unused or disabled analog inputs so they cannot float above the valid supply range.

Do not substitute the MC14052BD for an MC14051BD or other MC1405x member solely because the packages match. The MC14052BD is the dual 2:4 function, while the channel matrices differ. For an existing CD4052 board, verify the actual original device, compare the truth table and enable behavior, and review on-resistance, leakage, switching time, logic thresholds, and temperature limits before approving the substitution.

Operate the device only within its 3 V to 18 V supply range and ensure the digital select and enable signals remain within valid logic levels for that supply. Absolute maximum ratings are not operating targets. If external signals can exceed the supply, add appropriate clamping or protection, particularly when the mux selects sensor inputs, test leads, or externally accessible connectors.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Yes
무할로겐
Unknown
분쟁 광물
Unknown

The product listing identifies MC14052BD as RoHS compliant, and the datasheet states that Pb-free packages are available. No automotive qualification, REACH declaration, halogen-free statement, or conflict-minerals declaration was established.

관련 검색

MC14052BD datasheet MC14052BD pinout MC14052BD datasheet pdf MC14052BD equivalent MC14052BD replacement MC14052BD cross reference MC14052BD vs MC14052BF MC14052BD footprint MC14052BD price MC14052BD stock onsemi MC14052BD MC14052BD application circuit

관련 부품 & 용어

onsemi MC14052BD MC14052BF NLV14052BDG MC14052BDG CD4051 CD4052 CD4053 analog multiplexer analog demultiplexer analog switch interface IC semiconductor dual 2:4 multiplexer binary address decoder on-resistance 280 ohm 12 nV/sqrt(Hz) 3 V to 18 V SOIC-16 QFN family surface mount SMD RoHS Pb-free packaging industrial control data acquisition sensor multiplexing
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기