MC14541BDG - 3MHz 16-Stage Timer IC | onsemi
부품 번호: MC14541BDG ✓ 활성MC14541BDG 개요
A programmable timer is a clock and timing IC that divides a known input frequency or generates a periodic output using a counter and oscillator. The MC14541B belongs to the broader timer hierarchy that includes oscillator, counter, monostable, and astable timing functions. Its oscillator and binary counter are normally used together to create a stable, adjustable clock output without requiring a separate microcontroller for simple repetitive timing tasks.
The 16-stage counter provides programmable division ratios and supports repetitive waveform generation. The integrated oscillator accepts external timing components, allowing the operating frequency to be set with external resistor and capacitor values. A 3 V to 18 V supply range covers low-voltage logic systems through conventional industrial control voltages, while the specified -55 °C to 125 °C temperature range supports demanding industrial environments.
The architecture separates the oscillator, 16-stage binary counter, automatic power-on reset, and output control logic into one integrated device. Automatic power-on reset establishes a defined starting condition after power is applied, reducing initialization effort. The output stage provides a periodic signal derived from the divided counter clock, allowing the IC to serve as the central timing element in small control, sequencing, and periodic-trigger systems.
Typical uses include industrial pulse generation, repetitive equipment-cycle timing, delayed switching, frequency division, oscillator replacement, and embedded control subcircuits. The device is particularly useful where a fixed clock, a low-frequency service pulse, or a divided timing signal is required but a programmable microcontroller would add unnecessary complexity. Its broad supply range also allows one timer design to be used across multiple logic voltage environments.
Choose external oscillator components with tolerances suitable for the required timing accuracy, and verify the resulting frequency across temperature and supply-voltage extremes. Place the timing capacitor and resistors close to the relevant device pins, keep the output load within the specified drive capability, and account for counter overflow when defining pulse timing. Confirm reset behavior and output polarity against the manufacturer datasheet for the selected system configuration.
This page combines the manufacturer timing architecture, operating limits, package details, verified sourcing references, drop-in candidates, comparison parameters, and practical PCB guidance. It also distinguishes the tube-packaged MC14541BDG from related ordering codes and identifies which electrical details require confirmation for each candidate before PCB or production use.
드롭인 대체품: MC14541BDG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC14541BDG (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Oscillator Frequency, Power-On Reset, Product Type.
MC14541BDR2G
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4541BM
✅ 드롭인가격 문의
데이터시트 보기 →MC14541BDG 사양
| Product Type | Programmable timer IC |
| Maximum Oscillator Frequency | 3 MHz |
| Counter Stages | 16 stages |
| Supply Voltage Range | 3 V to 18 V |
| 동작 온도 범위 | -55 °C to 125 °C |
| 패키지 | 14-pin SOIC |
| 실장 유형 | Surface mount |
| Oscillator Type | RC oscillator with external capacitor and two resistors |
| Power-On Reset | Automatic |
| 출력 유형 | Periodic output controlled by output logic |
| Logic Family | CMOS |
| RoHS 상태 | Compliant |
| REACH Status | Unknown |
MC14541BDG 핀 구성
| 핀 1 | OSC1 — Oscillator terminal |
| 핀 2 | OSC2 — Oscillator terminal |
| 핀 3 | VSS — Ground reference |
| 핀 4 | RESET — Counter reset input |
| 핀 5 | VDD — Positive power supply |
| 핀 6 | OUT — Timer output |
| 핀 7 | NC — Not connected |
| 핀 8 | NC — Not connected |
| 핀 9 | NC — Not connected |
| 핀 10 | NC — Not connected |
| 핀 11 | NC — Not connected |
| 핀 12 | NC — Not connected |
| 핀 13 | NC — Not connected |
| 핀 14 | NC — Not connected |
일반적인 애플리케이션
MC14541BDG 적합 용도: 6 애플리케이션s: Industrial Repetitive Cycle Timing, Frequency Division and Clock Generation, Periodic Trigger and Pulse Generation, Delayed Switching and Sequence Control, Test and Measurement Trigger Source, Audio and Communication Timing Support.
Industrial Repetitive Cycle Timing
The MC14541BDG fits repetitive equipment-cycle control because its 16-stage binary counter converts an oscillator signal into a lower periodic output. The 3 MHz maximum oscillator frequency provides ample timing range, while the 3 V to 18 V supply range supports common industrial logic levels. Use the oscillator with external timing components, connect the counter output to the required control signal, and verify pulse width at the worst-case supply voltage and temperature. Component tolerances and temperature drift determine the practical timing accuracy, so calculate the complete error budget rather than relying only on the nominal oscillator frequency. Automatic power-on reset provides a defined startup state, which is useful when a control system must not begin with an indeterminate counter condition.
추천
Frequency Division and Clock Generation
The MC14541BDG is suitable for dividing a reference clock into a lower service frequency because the internal 16-stage binary counter provides programmable division steps. Its integrated RC oscillator can operate with an external capacitor and two resistors, avoiding a separate oscillator package when only moderate frequency stability is required. With a maximum oscillator frequency of 3 MHz, the device can support timing tasks from low-frequency control pulses to higher reference-frequency division. Confirm the selected divider ratio, output waveform, and allowable load in the onsemi MC14541B datasheet. For applications requiring precise frequency accuracy, characterize the external timing components over temperature and supply-voltage limits before treating the generated clock as a precision reference.
추천
Periodic Trigger and Pulse Generation
The MC14541BDG can generate a recurring trigger for relays, alarms, sampling commands, or actuator sequencing without a programmable controller. Its output-control logic and 16-stage counter provide a repeatable interval derived from the external RC oscillator. The 3 V to 18 V supply range makes it useful across multiple industrial control environments, and the specified -55 °C to 125 °C rating supports operation across wide temperature conditions. Design the output path to match the required pulse polarity and load, and ensure any connected relay driver includes appropriate isolation from the timer supply. Use the reset function and startup sequence deliberately so the periodic output cannot begin in an unintended state during power restoration.
추천
Delayed Switching and Sequence Control
The MC14541BDG is useful in delayed-switching systems that need a simple timing event rather than a complete microcontroller. Its automatic power-on reset establishes a known initial condition, while the counter and oscillator create a delayed or repetitive transition for sequencing external circuitry. The 14-pin SOIC package supports compact, surface-mounted control boards, and the 3 V to 18 V supply range allows integration with conventional CMOS logic. Keep the timing path physically separate from noisy switching nodes, and validate reset and output behavior with the actual power-up profile of the board. If the controlled load is inductive or high current, use a suitable interface stage rather than driving it directly from the timer output.
추천
Test and Measurement Trigger Source
The MC14541BDG can provide a repetitive low-frequency trigger for bench equipment, automated test sequences, and instrumentation. Its 16-stage counter allows a higher oscillator signal to be reduced into a usable periodic event, while automatic power-on reset helps establish repeatable initialization. The 3 MHz maximum oscillator frequency is considerably higher than many low-frequency trigger requirements, allowing timing to be set primarily through the external RC network and counter selection. For measurement-grade accuracy, evaluate oscillator slope, component tolerance, supply sensitivity, and temperature drift with the intended external components. A Schmitt-trigger input elsewhere in the test system may improve noise immunity when the trigger is routed through long cables.
추천
Audio and Communication Timing Support
The MC14541BDG can support non-precision timing tasks in audio equipment, communication interfaces, and embedded signal-control systems where a divided or repetitive trigger is required. Its 16-stage binary counter and programmable oscillator offer a compact alternative to adding general-purpose logic solely for a slow timing function. The broad 3 V to 18 V operating range can simplify rail selection when the device is placed beside multiple generations of CMOS control logic. Keep oscillator components away from high-current switching paths and follow the manufacturer's grounding and routing recommendations to prevent timing jitter. Audio or communications applications requiring synchronized low-jitter clocks should use a dedicated clock generator when the timer oscillator's temperature and supply sensitivity is insufficient.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC14541BDG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC14541BDR2G | CD4541BM |
|---|---|---|---|
| Package | 14-pin SOIC | 14-pin SOIC | 14-pin SOIC |
| Brand | onsemi | onsemi | onsemi |
| Counter Stages | 16 stages | 16 stages | 16 stages |
| Oscillator Arrangement | External capacitor and two resistors | External capacitor and two resistors | External capacitor and two resistors |
| Ordering Format | MC14541BDG tube ordering form | MC14541BDR2G tape-and-reel ordering form | CD4541BM ordering form |
주요 차별점
- Maintains the onsemi 3 MHz timing class (vs CD4541BM)
- Provides a direct 14-SOIC production ordering option (vs MC14541BDR2G)
- Combines counter, oscillator, reset, and output logic (vs Discrete counter and RC oscillator implementation)
설계 노트
Route the external oscillator capacitor and two resistors close to the OSC1 and OSC2 connections, and keep this timing loop compact. Avoid sharing high-current return paths between the oscillator components and switching loads. For timing accuracy, calculate the worst-case tolerance of each timing component and verify the resulting frequency across the intended supply-voltage and temperature ranges.
Place the device-ground and supply-decoupling connections directly at the package pins, and keep oscillator-current loops away from the supply pins. The MC14541BDG supports a 3 V to 18 V operating range, but the effective output timing can still vary with supply voltage. Verify reset sequencing during power-up and power-down so external logic never interprets an uncontrolled output transition as a valid command.
Do not treat every 4541-family timer as a pin-for-pin substitute without comparing the complete connection diagram. MC14541BDG and MC14541BDR2G share the listed 14-SOIC format and 3 MHz classification, while CD4541BM requires confirmation of reset polarity, oscillator connections, output behavior, and electrical limits. Also confirm whether the incoming design expects tube or tape-and-reel delivery before changing the ordering code.
규정 준수 정보
RoHS compliance is identified in the PartGenie component record. No definitive REACH, lead-free, halogen-free, or conflict-minerals conclusion is stated for this exact ordering code.