CD4541BCM - 100kHz Programmable Timer | onsemi | 14-SOIC
부품 번호: CD4541BCM ✓ 활성CD4541BCM 개요
A programmable timer is a timing IC that generates an output after a selected delay. The CD4541 belongs to the CMOS counter and timer hierarchy, combining an oscillator, binary counter, reset function, and control outputs in one package. This integration makes it useful for delayed switching, periodic events, industrial timing modules, pulse generation, and embedded control systems where a microcontroller is unnecessary or unavailable.
The principal device characteristics include a maximum oscillator frequency of 100 kHz, a 16-stage binary counting section, and an integrated power-on reset. The external resistor-capacitor network determines the oscillator timing, while counter and output-control logic determine how those cycles are presented at the outputs. The CD4541BCM is identified as a military-temperature-grade, 14-terminal gull-wing SOP device, making temperature qualification and package geometry important during replacement decisions.
Internally, the oscillator provides the time base, the 16-stage binary counter accumulates oscillator transitions, and dedicated output logic controls the resulting outputs. The special power-on reset circuit establishes a defined timing state when power is applied. Because the oscillator timing elements are external, component tolerance, resistor temperature coefficient, capacitor stability, and PCB leakage can directly affect interval accuracy and should be included in the timing-error budget.
Typical applications include industrial machinery interlocks, appliance delay circuits, test and measurement trigger sequencing, periodic pulse generation, power-control timers, and compact embedded timing modules. The integrated oscillator and counter are particularly useful when a system needs a simple autonomous interval rather than a software-driven timer. The 14-pin SOIC package also supports conventional surface-mount assembly and rework.
For reliable timing, place the oscillator resistor and capacitor close to their associated pins, use resistor and capacitor tolerances appropriate for the required interval accuracy, and keep high-current switching loops away from the timing nodes. Verify startup behavior and output states over the complete supply-voltage and temperature range. A substitute should be checked for identical pinout, oscillator limits, counter length, output polarity, reset behavior, and package dimensions before it is treated as a drop-in replacement.
This product overview combines the manufacturer-device description with engineering guidance on oscillator tolerances, power-on reset, PCB layout, and verified same-package replacement paths. It is designed to help engineers identify the function, inspect package compatibility, and select a replacement without overlooking the electrical details that govern timer accuracy.
드롭인 대체품: CD4541BCM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: CD4541BCM (동일 폼 팩터 및 풋프린트) — 차이점: Power-On Reset, Package, Maximum Oscillator Frequency, Mounting Type, Product Type.
CD4541BE
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →CD4541BM
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →HCF4541M013TR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
CD4541BNSR
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC14541BDG
✅ 드롭인가격 문의
데이터시트 보기 →CD4541BCM 사양
| Device Type | Programmable timer and 16-stage binary counter |
| Technology | CMOS |
| Maximum Oscillator Frequency | 100 kHz |
| Counter Length | 16 stages |
| Integrated Oscillator | Yes, with external capacitor and two external resistors |
| Power-On Reset | Yes, automatic reset |
| Output Control Logic | Integrated |
| 패키지 | 14-pin SOIC |
| Terminal Count | 14 terminals |
| Terminal Form | Gull wing |
| Package Code | SOP |
| Package Shape | Rectangular |
| Temperature Grade | Military |
CD4541BCM rectangular 핀 구성 가이드
CD4541BCM(rectangular 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: CD4541BCM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
CD4541BCM 적합 용도: 6 애플리케이션s: Industrial Delay and Interlock Circuits, Periodic Pulse Generation, Appliance Control and Delayed Switching, Test and Measurement Trigger Sequencing, Power-Control and Delay Modules, Embedded Timer Subsystems.
Industrial Delay and Interlock Circuits
The CD4541BCM is useful in industrial delay, interlock, and sequencing modules because its integrated oscillator eliminates the need for a separate clock circuit. The 16-stage binary counter expands the oscillator timing interval, allowing a selected delay to be produced with an external timing resistor and capacitor. Its automatic power-on reset establishes a defined state after startup. For machine-control use, preserve the 14-pin SOIC footprint, verify output polarity and logic levels, and validate the delay over the complete supply-voltage and environmental range. Keep switching-node energy away from the oscillator components to prevent timing shifts.
추천
Periodic Pulse Generation
The CD4541BCM can generate periodic events without a microcontroller by combining its integrated oscillator, 16-stage binary counter, and output-control logic. The external resistor-capacitor network establishes the oscillator frequency, while the counter stages determine the timing presented at the outputs. According to the Fairchild manufacturer datasheet, the automatic power-on reset initializes timing when power is applied, providing repeatable startup behavior. Select timing components for the required interval tolerance and confirm that the output waveform matches the load. Verify maximum oscillator frequency when choosing the shortest programmed interval.
추천
Appliance Control and Delayed Switching
In appliances and equipment controllers, the CD4541BCM can implement delayed switching, timed enable, or a basic sequential control function. Its integrated oscillator and 16-stage counter reduce the number of external timing blocks, while the automatic power-on reset provides a known starting condition. The device is particularly suitable where a small autonomous control circuit is preferable to allocating a microcontroller. Keep the timing network close to the IC, account for component tolerances in the interval-error budget, and verify that relay, heater, or motor interfaces do not inject noise into the timing pins.
추천
Test and Measurement Trigger Sequencing
The CD4541BCM supports test and measurement systems that require an autonomous trigger interval or staged timing event. Its 100 kHz maximum oscillator frequency and 16-stage counter provide flexible timing from short oscillator periods to longer counted intervals. Output-control logic allows the timing sequence to be observed externally, and the power-on reset establishes a repeatable initial state. For instrumentation, keep the oscillator network physically small and isolated from analog signal paths, verify output settling behavior with the intended load, and check cumulative timing error across voltage and temperature before using the circuit as a precision reference.
추천
Power-Control and Delay Modules
The CD4541BCM can supervise delayed power-enable, disable, or transfer events in compact power-control modules. The integrated oscillator supplies a continuous time base, the 16-stage counter extends that base into a usable delay, and the power-on reset prevents undefined timing at startup. This arrangement is useful when a controller must assert a permissive signal only after a defined interval. Account for the timing-network tolerance, maintain adequate input-output timing margin around the maximum 100 kHz oscillator limit, and isolate the control output from inductive or high-current switching stages.
추천
Embedded Timer Subsystems
The CD4541BCM can act as a dedicated timing subsystem in a larger embedded control design that does not need a complete microcontroller for every interval function. Its integrated oscillator, counter, reset circuit, and control outputs allow it to handle repetitive timing tasks autonomously while another controller manages system-level functions. The 14-pin SOIC package makes it straightforward to add to conventional surface-mount boards. Document reset and output behavior at power-up, validate counter transitions under all supported operating conditions, and ensure the PCB provides adequate decoupling and a low-impedance ground return for predictable timing.
추천
추천 제품 요약
엔지니어링 참조 데이터: CD4541BCM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | CD4541BE | CD4541BM | HCF4541M013TR | CD4541BNSR | MC14541BDG |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | STMicroelectronics | onsemi | onsemi |
| Package | 14-SOIC | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same | 14-SOIC - same |
| Device Type | Programmable timer | Programmable timer | Programmable timer | Programmable timer | Programmable timer | Programmable timer |
| Counter Length | 16 stages | 16 stages | 16 stages | 16 stages | 16 stages | 16 stages |
| Maximum Oscillator Frequency | 100 kHz | 100 kHz | 100 kHz | 100 kHz | 100 kHz | 100 kHz |
| Integrated Oscillator | Yes | Yes | Yes | Yes | Yes | Yes |
| Power-On Reset | Yes, automatic | Yes, automatic | Yes, automatic | Yes, automatic | Yes, automatic | Yes, automatic |
| Output Control Logic | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
주요 차별점
- Maintains the full 16-stage timer architecture (vs HCF4541M013TR)
- Supports the documented 100 kHz oscillator class (vs MC14541BDG)
- Preserves autonomous timing and reset functions (vs CD4541BNSR)
- Targets military-grade temperature ordering (vs CD4541BE)
설계 노트
Place the external oscillator capacitor and two timing resistors close to the CD4541BCM timing pins, and keep the associated copper paths short. Minimize parasitic capacitance because it changes the oscillator period. Route the timing network away from relays, switching regulators, and high-current load returns. Provide a low-impedance ground path and place the required bypass capacitor at the supply pins according to the manufacturer application guidance.
Do not select replacement parts from package appearance alone. CD4541-family alternatives may use the same 14-pin SOIC outline while differing in temperature grade, supply limits, output behavior, or qualification. Compare the manufacturer connection diagram and electrical-characteristics tables for every candidate. The target is identified as military-temperature grade, so an industrial or commercial-grade substitute may be acceptable electrically but unsuitable for an application with a strict environmental requirement.
Calculate oscillator timing from the selected external resistor and capacitor values, then include resistor tolerance, capacitor tolerance, temperature coefficient, and leakage in the interval-error budget. Verify the operating point remains below the 100 kHz maximum oscillator frequency at the highest intended supply voltage and temperature. A bench measurement at one temperature is insufficient when the timer controls a safety sequence, test trigger, or synchronized output.
The power-on reset initializes the timer after power is applied, but the external supply must still meet the device's electrical limits. Confirm the supply range, input-current behavior, and output-load capability in the manufacturer datasheet before connecting the part to a system rail. Use stable bypassing and account for startup transients so that the oscillator and counter begin in a controlled state rather than repeatedly resetting during rail settling.
규정 준수 정보
The manufacturer temperature-grade identification is available, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact ordering code. AEC-Q100 is not applicable because this is a timer IC rather than an automotive-qualified device.