MC145483DW - 3V 13-Bit PCM Codec-Filter | NXP
부품 번호: MC145483DW ✗ 단종MC145483DW 개요
A PCM codec-filter is an audio interface integrated circuit that converts an analog voice signal into a linear PCM digital stream and reconstructs an analog voice signal from a digital stream. In the broader component hierarchy, it belongs to the audio codec family within interface ICs and power-management-dependent signal-chain devices. Its combined conversion and filtering functions reduce the number of separate blocks needed in a voice terminal or telecommunications design.
The principal specifications are 13-bit conversion resolution, a 3 V supply, one ADC channel, one DAC channel, and a 20-pin SOIC package. The 2s-complement PCM format provides a standard representation for digital audio processing. Because the codec-filter integrates the required smoothing and band-limiting functions, designers can use it as the central analog-to-digital and digital-to-analog conversion element in compact voice-processing equipment.
The MC145483 family is intended to operate in synchronous digital communication systems. Its linear PCM interface supports direct integration with a digital signal processor, controller, or other PCM-compatible logic. The 20-pin surface-mount package permits conventional automated assembly and board-level density, although the narrow logic spacing requires careful routing between the digital interface, analog signal path, supply pins, and ground return.
Typical applications include digital telephone terminals, voice-band communications equipment, speech-processing systems, answering machines, and embedded voice interfaces. The codec-filter is especially appropriate when a design needs a defined PCM stream, integrated reconstruction filtering, and a compact interface between analog microphones or speakers and synchronous digital logic.
For implementation, follow the manufacturer pin-description and typical-application tables when assigning analog inputs, outputs, clock signals, and control connections. Keep analog and digital return currents separated where practical, place bypass capacitors close to the supply pins, and route clock and data traces away from sensitive analog inputs. These practices reduce noise coupling in the voice signal path.
This page combines device specifications, lifecycle information, package guidance, application analysis, and verified cross-reference research to support component selection and board-level implementation. The 13-bit PCM resolution and integrated filtering make MC145483DW a specialized choice for voice-band designs rather than a general-purpose high-fidelity audio converter.
드롭인 대체품: MC145483DW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC145483DW 최대 정격 & 전기적 특성
| Device Type | 13-bit linear PCM codec-filter |
| 공급 전압 | 3 V |
| ADC Count | 1 |
| DAC Count | 1 |
| Conversion Resolution | 13 bit |
| Data Format | 2s complement linear PCM |
| 패키지 | 20-pin SOIC |
| 실장 유형 | Surface mount |
| Device Function | Voice digitization and reconstruction |
| Analog Filtering | Band limiting and smoothing |
| Operating Mode | Synchronous operation |
| Application | Digital communication systems |
MC145483DW 20-pin soic 핀 구성 가이드
MC145483DW(20-pin soic 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MC145483DW.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC145483DW 적합 용도: 6 애플리케이션s: Digital Telephone Terminal, Voice-Band Communication Equipment, Speech-Processing Embedded System, Digital Answering Machine, Voice Sensor Interface, Industrial Voice Control Panel.
Digital Telephone Terminal
The MC145483DW fits a digital telephone terminal that needs analog voice conversion close to the microphone and speaker connections. Its 13-bit ADC and DAC provide one linear PCM input and output path, while the integrated band-limiting and smoothing functions support voice-band operation. The synchronous interface allows a communications controller or DSP to process the PCM stream deterministically. In implementation, the 20-pin SOIC footprint should be placed near the voice analog circuitry, with bypass capacitors and grounded return paths positioned to prevent clock and digital data from coupling into the microphone or speaker signals.
추천
Voice-Band Communication Equipment
The MC145483DW is suitable for voice-band communication equipment requiring a compact conversion path between analog speech circuitry and synchronous digital logic. The 3 V supply supports low-voltage equipment, and the one-ADC/one-DAC arrangement supplies the basic directional conversion function without separate codec and filter blocks. Its 13-bit linear PCM representation can be routed to a communications processor for packetization, coding, or call-control processing. Board planning should reserve continuous analog and digital grounds and keep the clock trace physically separated from the voice input to preserve signal integrity.
추천
Speech-Processing Embedded System
The MC145483DW can serve as the analog voice boundary of an embedded speech-processing system. The ADC converts incoming speech into a linear PCM stream, while the DAC reconstructs a processed voice waveform for playback. Its 13-bit resolution and integrated reconstruction smoothing suit compact voice interfaces, and synchronous operation allows deterministic connection to a DSP or real-time microcontroller. The principal layout trade-off is analog and digital coexistence in one small package: maintain short analog paths, decouple the supply locally, and verify that switching clock and data edges remain well isolated from the voice input.
추천
Digital Answering Machine
The MC145483DW supports a digital answering-machine architecture by providing the voice conversion path used to capture and reproduce calls. Its integrated ADC, DAC, filtering, and smoothing functions allow the analog telephone line or microphone signal to enter a synchronous digital recording and playback system. The 3 V operation fits modern compact consumer electronics, while the 20-pin SOIC package supports automated assembly. Because the device is obsolete, a legacy design should verify its original clocking scheme, bypass requirements, and analog impedance before production release.
추천
Voice Sensor Interface
The MC145483DW can be used in a voice sensor interface that captures sound for classification, monitoring, or control and reconstructs a test or confirmation signal. The ADC path handles digitization, while the DAC path supports loopback-style voice reconstruction and smoothing. A 13-bit PCM stream can feed a microcontroller or DSP for feature extraction or alarm logic. For low-level microphone signals, follow the manufacturer’s recommended analog network and grounding arrangement; do not infer a microphone preamplifier is included because the verified device description identifies conversion and filtering functions only.
추천
Industrial Voice Control Panel
The MC145483DW is applicable to an industrial voice control panel that accepts operator speech and generates audible prompts. Its linear PCM ADC and DAC provide a defined bridge between the microphone, speaker, and embedded controller, while the integrated band-limiting and smoothing functions support practical voice-band waveforms. The 3 V supply simplifies integration with modern embedded logic. In an industrial enclosure, preserve the recommended analog layout, use stable supply decoupling, and validate the complete microphone preamplifier and speaker amplifier separately because those stages are outside the codec-filter function.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC145483DW — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 20-pin SOIC |
| Brand | NXP Semiconductors |
| Device Type | Linear PCM codec-filter |
| Supply Voltage | 3 V |
| Resolution | 13 bit |
| ADC Count | 1 |
| DAC Count | 1 |
| Data Format | 2s-complement linear PCM |
| Mounting Type | Surface mount |
주요 차별점
- Conversion and reconstruction are combined in one compact codec-filter (vs Discrete ADC, DAC, and reconstruction-filter signal chain)
- Purpose-built for linear PCM voice-band processing (vs Generic general-purpose audio converter interface)
- Compact surface-mount integration for legacy voice systems (vs Larger multi-component codec and filter implementation)
설계 노트
Follow the manufacturer’s pin-description and typical-application layout without inferring pin functions from neighboring devices. Place the 20-pin SOIC near the microphone and speaker interface circuitry, connect bypass capacitors at the designated supply pins, and keep clock and PCM data routes away from the analog voice input. Provide a stable ground reference and route analog return current without passing through digital switching-current paths.
Treat the analog input and PCM clock as separate critical paths. Use short, direct analog routing, avoid sharing narrow traces between microphone signals and digital data, and maintain controlled return paths beneath or alongside the relevant interfaces. Validate the completed board with clock edges, PCM data transitions, and voice recording activity because the codec's synchronous interface can couple switching noise into the reconstructed or captured audio path.
Do not treat MC145483 as a universal drop-in designation for every family package. The family included SOG, SSOP, TSSOP, and QFN options, whereas MC145483DW is the 20-SOIC ordering variant. Before substituting any marking, compare the package pin count, exposed connections, supply arrangement, clock definitions, PCM timing, and analog pin functions against the manufacturer datasheet. Confirm that legacy supply bypass and startup arrangements are retained.
규정 준수 정보
No current lot-specific environmental or material compliance declarations were identified for this obsolete historical device.