MC145483DW - 3V 13-Bit PCM Codec-Filter | NXP
料号: MC145483DW ✗ 停产MC145483DW 概述
A PCM codec-filter is an audio interface integrated circuit that converts an analog voice signal into a linear PCM digital stream and reconstructs an analog voice signal from a digital stream. In the broader component hierarchy, it belongs to the audio codec family within interface ICs and power-management-dependent signal-chain devices. Its combined conversion and filtering functions reduce the number of separate blocks needed in a voice terminal or telecommunications design.
The principal specifications are 13-bit conversion resolution, a 3 V supply, one ADC channel, one DAC channel, and a 20-pin SOIC package. The 2s-complement PCM format provides a standard representation for digital audio processing. Because the codec-filter integrates the required smoothing and band-limiting functions, designers can use it as the central analog-to-digital and digital-to-analog conversion element in compact voice-processing equipment.
The MC145483 family is intended to operate in synchronous digital communication systems. Its linear PCM interface supports direct integration with a digital signal processor, controller, or other PCM-compatible logic. The 20-pin surface-mount package permits conventional automated assembly and board-level density, although the narrow logic spacing requires careful routing between the digital interface, analog signal path, supply pins, and ground return.
Typical applications include digital telephone terminals, voice-band communications equipment, speech-processing systems, answering machines, and embedded voice interfaces. The codec-filter is especially appropriate when a design needs a defined PCM stream, integrated reconstruction filtering, and a compact interface between analog microphones or speakers and synchronous digital logic.
For implementation, follow the manufacturer pin-description and typical-application tables when assigning analog inputs, outputs, clock signals, and control connections. Keep analog and digital return currents separated where practical, place bypass capacitors close to the supply pins, and route clock and data traces away from sensitive analog inputs. These practices reduce noise coupling in the voice signal path.
This page combines device specifications, lifecycle information, package guidance, application analysis, and verified cross-reference research to support component selection and board-level implementation. The 13-bit PCM resolution and integrated filtering make MC145483DW a specialized choice for voice-band designs rather than a general-purpose high-fidelity audio converter.
直接替换替代料: MC145483DW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料MC145483DW 最大额定值与电气特性
| Device Type | 13-bit linear PCM codec-filter |
| 电源电压 | 3 V |
| ADC Count | 1 |
| DAC Count | 1 |
| Conversion Resolution | 13 bit |
| Data Format | 2s complement linear PCM |
| 封装 | 20-pin SOIC |
| 安装类型 | Surface mount |
| Device Function | Voice digitization and reconstruction |
| Analog Filtering | Band limiting and smoothing |
| Operating Mode | Synchronous operation |
| Application | Digital communication systems |
MC145483DW 20-pin soic 引脚配置指南
MC145483DW(20-pin soic 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MC145483DW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC145483DW 适用于 6 应用s: Digital Telephone Terminal, Voice-Band Communication Equipment, Speech-Processing Embedded System, Digital Answering Machine, Voice Sensor Interface, Industrial Voice Control Panel.
Digital Telephone Terminal
The MC145483DW fits a digital telephone terminal that needs analog voice conversion close to the microphone and speaker connections. Its 13-bit ADC and DAC provide one linear PCM input and output path, while the integrated band-limiting and smoothing functions support voice-band operation. The synchronous interface allows a communications controller or DSP to process the PCM stream deterministically. In implementation, the 20-pin SOIC footprint should be placed near the voice analog circuitry, with bypass capacitors and grounded return paths positioned to prevent clock and digital data from coupling into the microphone or speaker signals.
推荐
Voice-Band Communication Equipment
The MC145483DW is suitable for voice-band communication equipment requiring a compact conversion path between analog speech circuitry and synchronous digital logic. The 3 V supply supports low-voltage equipment, and the one-ADC/one-DAC arrangement supplies the basic directional conversion function without separate codec and filter blocks. Its 13-bit linear PCM representation can be routed to a communications processor for packetization, coding, or call-control processing. Board planning should reserve continuous analog and digital grounds and keep the clock trace physically separated from the voice input to preserve signal integrity.
推荐
Speech-Processing Embedded System
The MC145483DW can serve as the analog voice boundary of an embedded speech-processing system. The ADC converts incoming speech into a linear PCM stream, while the DAC reconstructs a processed voice waveform for playback. Its 13-bit resolution and integrated reconstruction smoothing suit compact voice interfaces, and synchronous operation allows deterministic connection to a DSP or real-time microcontroller. The principal layout trade-off is analog and digital coexistence in one small package: maintain short analog paths, decouple the supply locally, and verify that switching clock and data edges remain well isolated from the voice input.
推荐
Digital Answering Machine
The MC145483DW supports a digital answering-machine architecture by providing the voice conversion path used to capture and reproduce calls. Its integrated ADC, DAC, filtering, and smoothing functions allow the analog telephone line or microphone signal to enter a synchronous digital recording and playback system. The 3 V operation fits modern compact consumer electronics, while the 20-pin SOIC package supports automated assembly. Because the device is obsolete, a legacy design should verify its original clocking scheme, bypass requirements, and analog impedance before production release.
推荐
Voice Sensor Interface
The MC145483DW can be used in a voice sensor interface that captures sound for classification, monitoring, or control and reconstructs a test or confirmation signal. The ADC path handles digitization, while the DAC path supports loopback-style voice reconstruction and smoothing. A 13-bit PCM stream can feed a microcontroller or DSP for feature extraction or alarm logic. For low-level microphone signals, follow the manufacturer’s recommended analog network and grounding arrangement; do not infer a microphone preamplifier is included because the verified device description identifies conversion and filtering functions only.
推荐
Industrial Voice Control Panel
The MC145483DW is applicable to an industrial voice control panel that accepts operator speech and generates audible prompts. Its linear PCM ADC and DAC provide a defined bridge between the microphone, speaker, and embedded controller, while the integrated band-limiting and smoothing functions support practical voice-band waveforms. The 3 V supply simplifies integration with modern embedded logic. In an industrial enclosure, preserve the recommended analog layout, use stable supply decoupling, and validate the complete microphone preamplifier and speaker amplifier separately because those stages are outside the codec-filter function.
推荐
推荐产品汇总
工程参考数据: MC145483DW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 20-pin SOIC |
| Brand | NXP Semiconductors |
| Device Type | Linear PCM codec-filter |
| Supply Voltage | 3 V |
| Resolution | 13 bit |
| ADC Count | 1 |
| DAC Count | 1 |
| Data Format | 2s-complement linear PCM |
| Mounting Type | Surface mount |
关键差异点
- Conversion and reconstruction are combined in one compact codec-filter (对比 Discrete ADC, DAC, and reconstruction-filter signal chain)
- Purpose-built for linear PCM voice-band processing (对比 Generic general-purpose audio converter interface)
- Compact surface-mount integration for legacy voice systems (对比 Larger multi-component codec and filter implementation)
设计说明
Follow the manufacturer’s pin-description and typical-application layout without inferring pin functions from neighboring devices. Place the 20-pin SOIC near the microphone and speaker interface circuitry, connect bypass capacitors at the designated supply pins, and keep clock and PCM data routes away from the analog voice input. Provide a stable ground reference and route analog return current without passing through digital switching-current paths.
Treat the analog input and PCM clock as separate critical paths. Use short, direct analog routing, avoid sharing narrow traces between microphone signals and digital data, and maintain controlled return paths beneath or alongside the relevant interfaces. Validate the completed board with clock edges, PCM data transitions, and voice recording activity because the codec's synchronous interface can couple switching noise into the reconstructed or captured audio path.
Do not treat MC145483 as a universal drop-in designation for every family package. The family included SOG, SSOP, TSSOP, and QFN options, whereas MC145483DW is the 20-SOIC ordering variant. Before substituting any marking, compare the package pin count, exposed connections, supply arrangement, clock definitions, PCM timing, and analog pin functions against the manufacturer datasheet. Confirm that legacy supply bypass and startup arrangements are retained.
合规信息
No current lot-specific environmental or material compliance declarations were identified for this obsolete historical device.