onsemi

MC33502DG - Dual 1V Rail-to-Rail Op Amp | onsemi

부품 번호: MC33502DG ✓ 활성
1.0 V to 7 V Vdss 8-pin SOIC Package
MOQ: 1 |

MC33502DG 개요

The onsemi MC33502DG is a dual, general-purpose operational amplifier with rail-to-rail input and output operation, a 1.0 V minimum supply voltage, and operation from 1 V to 7 V. The device is packaged in an 8-pin SOIC and is specified for an industrial operating temperature range of -40 °C to +105 °C. Its two amplifier channels can operate independently, making it suitable for compact dual-signal conditioning, buffering, and low-voltage analog systems.

An operational amplifier is a high-gain analog signal-conditioning circuit used in the wider hierarchy of analog ICs, signal-chain components, and semiconductor devices. The MC33502DG combines differential input amplification, voltage feedback, and output-drive capability in two channels. Rail-to-rail inputs let the amplifier operate across nearly the complete input supply range, while rail-to-rail outputs improve signal swing when the available supply voltage is limited.

Key characteristics include a 1.0 V operating supply, a 7 V maximum supply, dual-channel configuration, and output swing within 50 mV of either supply rail. These characteristics suit portable equipment, battery-powered instrumentation, sensor interfaces, and low-voltage industrial controls where the signal must be amplified without a high-voltage supply. The 8-SOIC package also supports conventional surface-mount assembly and automated board production.

The MC33502 architecture is intended for low-voltage rail-to-rail operation. Under a 1.0 V supply and ground, the amplifier can still operate, while its input and output stages use the available supply range. Because the output remains approximately 50 mV from either rail, designers should leave this margin when calculating the usable output range. The dual configuration also reduces package count when two similar amplifier functions are required on the same board.

Typical applications include battery-powered sensor conditioning, low-voltage audio and communication interfaces, current sensing, portable medical instrumentation, industrial control modules, and general-purpose analog signal buffering. In a current-measurement circuit, the MC33502DG can amplify the voltage produced across a low-value shunt while operating from a low-voltage rail. Its rail-to-rail inputs help preserve signal range in compact systems.

When laying out a design, place the amplifier input and output routes away from switching nodes and high-current supply paths. Stable operation with the intended load and feedback network should be confirmed from the manufacturer datasheet, especially when driving long PCB traces, large capacitors, or cable capacitance. Decoupling capacitors should be placed close to the supply pins to suppress local supply noise.

This product page combines the manufacturer electrical characteristics, package information, application guidance, and verified drop-in cross-reference results. It also identifies the differences that matter when evaluating the MC33502DG against other low-voltage dual rail-to-rail operational amplifiers, while avoiding confusion between electrical equivalence and purely different order codes.

드롭인 대체품: MC33502DG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

TSV992AIDT

✅ 드롭인
📦 8-pin SOIC
20 MHz gain-bandwidth product and minimum operating voltage above 1.0 V; rail-to-rail dual-amplifier configuration

📋 참조 대체품 (카탈로그에 없음)

TS922AIDT

✅ 드롭인
📦 8-pin SOIC
Optimized for 3 V and 5 V operation rather than the MC33502DG's 1.0 V minimum supply; rail-to-rail dual-amplifier configuration

📋 참조 대체품 (카탈로그에 없음)

MC33502DG 최대 정격 & 전기적 특성

Product Type Dual rail-to-rail operational amplifier
Number of Amplifier Channels 2 channels
Supply Voltage Range 1.0 V to 7 V
Minimum Operating Supply 1.0 V
Maximum Operating Supply 7 V
Input Common-Mode Range Rail-to-rail
Output Swing Within 50 mV of each supply rail
동작 온도 범위 -40 °C to +105 °C
Temperature Grade Industrial
패키지 8-pin SOIC
실장 유형 Surface mount

MC33502DG 핀 구성

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
핀 1 OUTA — Amplifier A output
핀 2 INA− — Inverting input for amplifier A
핀 3 INA+ — Non-inverting input for amplifier A
핀 4 V− — Negative supply or ground connection
핀 5 INB+ — Non-inverting input for amplifier B
핀 6 INB− — Inverting input for amplifier B
핀 7 OUTB — Amplifier B output
핀 8 V+ — Positive supply connection

일반적인 애플리케이션

MC33502DG 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Interfaces, Portable Medical Monitoring, Industrial Current Sensing, Low-Voltage Audio Buffering, Portable Communication Interfaces, Low-Voltage Control and Analog Monitoring.

🔋

Battery-Powered Sensor Interfaces

The MC33502DG fits battery-powered sensing circuits because both amplifier channels operate from a supply as low as 1.0 V. Rail-to-rail inputs help retain the usable range of a shrinking battery voltage, while rail-to-rail outputs reduce the voltage lost when driving the next analog stage. The device can amplify a bridge, resistive sensor, or low-voltage transducer signal without requiring a higher-voltage analog rail. Its 8-pin SOIC package also limits board area, although input offset, noise, and bias-current characteristics must be checked against the sensor's resolution requirements.

💊

Portable Medical Monitoring

The MC33502DG is suitable for compact medical-monitoring signal paths operating from low-voltage rails. Its two independent channels can support related analog measurements without requiring two separate amplifier packages, helping reduce board area and component count. The 1.0 V minimum operating supply supports battery-powered operation, while rail-to-rail input behavior preserves signal excursion as supply voltage declines. Design work should still evaluate noise, offset voltage, patient protection, isolation requirements, and applicable medical-system standards independently of the amplifier's general-purpose rating.

🏭

Industrial Current Sensing

The MC33502DG can amplify the differential voltage generated by a current shunt in low-voltage industrial control systems. Rail-to-rail input operation is valuable when the shunt voltage occupies much of the available signal range, while the dual channel allows the amplifier to handle a current measurement and another related analog signal. The 1–7 V supply range accommodates low-voltage industrial rails. Confirm input offset and bias behavior, shunt impedance, amplifier stability, and the required common-mode range before finalizing the measurement path.

🎧

Low-Voltage Audio Buffering

The MC33502DG can serve as a low-voltage buffer or gain stage in portable audio and communication equipment. Rail-to-rail output capability allows the amplifier to provide more of the available signal swing than a conventional non-rail-to-rail device, and two channels can support left and right signal paths. Operation from 1.0 V supports compact, energy-conscious designs. Audio engineers should verify output-noise density, distortion, gain-bandwidth product, load stability, and drive capability at the intended frequency before using the device in a signal chain.

🌐

Portable Communication Interfaces

The MC33502DG is useful for conditioning low-level signals in portable radio and communication interfaces. Its dual-channel architecture supports separate receive or control paths, while operation down to 1.0 V complements compact radio front ends powered from low-voltage rails. Rail-to-rail inputs and outputs improve signal utilization in constrained analog sections. Because a general-purpose amplifier is not automatically a full interface solution, engineers should verify input impedance, output drive, channel-to-channel behavior, high-frequency stability, and the communications system's impedance requirements.

🔧

Low-Voltage Control and Analog Monitoring

The MC33502DG can amplify control and monitoring signals in compact industrial equipment operating from a 1–7 V rail. Two channels allow one device to handle a feedback signal and a sensor or actuator interface, reducing package count on area-constrained boards. The low minimum supply voltage supports systems whose main rail falls during standby, and rail-to-rail operation improves signal range. Designers should confirm the device's offset, bandwidth, output-drive, and capacitive-load characteristics against the control-loop bandwidth and output impedance.

What is the operating voltage of the MC33502DG?
The MC33502DG operates from 1.0 V to 7 V. According to the onsemi MC33502 datasheet, the device is designed for low-voltage operation and can run from a 1.0 V supply and ground. This makes it useful in battery-powered, portable, and compact industrial circuits where a higher-voltage supply would increase system complexity. The dual amplifiers share the same supply pins, so both channels operate over the common 1–7 V range.
What are the key specifications of MC33502DG?
The MC33502DG is a dual operational amplifier with rail-to-rail inputs and outputs, a 1–7 V supply range, and an industrial temperature range of -40 °C to +105 °C. According to onsemi's MC33502 datasheet, the output can swing within 50 mV of either supply rail. It is offered in an 8-pin SOIC package for surface-mount assembly, with one amplifier channel per pair of input and output pins.
Is the MC33502DG input and output rail-to-rail?
Yes, the MC33502DG provides rail-to-rail operation at both the input and output. The onsemi MC33502 datasheet states that the output can approach each supply rail within 50 mV. This behavior maximizes usable signal range in low-voltage systems. Designers should still account for the 50 mV output margin and verify the input common-mode limits for the actual supply voltage and operating conditions.
Where can I download the MC33502DG datasheet PDF?
The official MC33502DG datasheet is available from onsemi at the manufacturer PDF link on this page. According to the onsemi MC33502 datasheet, the document covers the device's 1.0 V low-supply operation, rail-to-rail inputs and outputs, electrical characteristics, package information, and typical applications. Use the manufacturer document for the authoritative pin descriptions, ordering information, test conditions, and recommended application circuit.
Where is the MC33502DG pinout located?
The MC33502DG pinout is shown by the manufacturer datasheet and reflected in the package diagram on this page. The 8-pin SOIC contains two complete amplifier channels: OUTA, INA−, INA+, GND, INB+, INB−, OUTB, and V+. Use the pin-description table in the onsemi MC33502 datasheet when assigning PCB tracks. The exposed package has no separate exposed pad in this 8-pin SOIC configuration.
Where can I buy MC33502DG online?
The MC33502DG can be requested through the Request a Quote form on this page. The form allows buyers to specify quantity, package preference, and delivery requirements without relying on a static online price. For production planning, request current inventory, minimum order quantity, and lead time through the same form. The MC33502DG is an onsemi 8-pin SOIC catalog part, so its ordering information should be confirmed against the current manufacturer documentation.
What is the price of MC33502DG?
Use the Request a Quote form on this page for the current MC33502DG price and volume breaks. Pricing can vary with order quantity, delivery schedule, and component condition, so the platform does not publish a fixed static quote in the FAQ. Submit the required quantity and package preference to receive a current quotation for the exact onsemi MPN, MC33502DG, without confusing it with other order-code variants.
What is the lead time for MC33502DG?
Request the current lead time through the Request a Quote form on this page. Lead time depends on the ordered quantity, scheduled delivery date, and current component availability. The onsemi MC33502DG is identified as an industrial-temperature, 8-pin SOIC device, but current scheduling should be confirmed for the specific order. Providing a forecast consumption profile with the request can help establish a more useful production commitment.
Is MC33502DG in stock?
Submit the desired quantity through the Request a Quote form on this page to request current MC33502DG availability. The form is the appropriate route for checking stock against a specific order schedule and shipment destination. Avoid treating a distributor search result as a guaranteed allocation. For new production or scheduled builds, request a dated confirmation that covers the required quantity and any approved alternate sourcing plan.
MC33502DG vs TSV992AIDT - which is better for a low-voltage application?
Choose the MC33502DG when operation from a 1.0 V supply is essential; choose the TSV992AIDT when higher gain-bandwidth performance is more important than the lowest possible supply voltage. Cross-reference information identifies the TSV992AIDT as a 20 MHz rail-to-rail dual operational amplifier consuming up to 1.1 mA at 5 V, while the MC33502 datasheet specifies operation down to 1.0 V. Both require final supply, bandwidth, stability, and load verification.
What is the difference between MC33502DG and TS922AIDT?
The principal difference is the low-voltage operating target: the MC33502 datasheet specifies operation from 1.0 V, whereas the TS922AIDT is described as optimized for 3 V and 5 V operation. The MC33502DG also supports rail-to-rail inputs and outputs, with output swing within 50 mV of each rail. Treat the TS922AIDT as a possible low-voltage analog alternative, but verify its exact pinout and electrical limits before replacing an assembled design.
When should I choose MC33502DG over TSV992AIDT?
Choose the MC33502DG when the circuit must operate at 1.0 V or when minimizing the required supply voltage is the primary design objective. Choose the TSV992AIDT when a 20 MHz gain-bandwidth product and operation optimized around 3 V and 5 V are better suited to the signal path. The TSV992AIDT is identified as stable for gains above 4 with a 100 pF capacitive load, so bandwidth and capacitive-load requirements can also determine the selection.
Is MC33502DG suitable for battery-powered sensor interfaces?
Yes, the MC33502DG is well suited to battery-powered sensor interfaces because it operates from 1.0 V to 7 V and provides rail-to-rail input and output behavior. Its two amplifier channels can condition complementary or related sensor signals in one 8-pin SOIC. The onsemi MC33502 datasheet supports operation from a 1.0 V supply and ground, helping designers retain signal range when battery voltage falls. Check offset, noise, and bias-current limits at the intended operating point.
What can replace MC33502DG?
The verified cross-reference results identify the TSV992AIDT and TS922AIDT as candidate replacements, but neither should be installed without checking the complete electrical specification and pin configuration. The MC33502DG operates down to 1.0 V, while the TSV992AIDT is described as a 20 MHz dual rail-to-rail amplifier and the TS922AIDT is optimized for 3 V and 5 V. The MC33502DR2G is also identified as a comparison part, but its order code differs and is not presented as a distinct engineering alternative.
Is MC33502DG the same as TSV992AIDT?
No. The MC33502DG and TSV992AIDT are functionally similar rail-to-rail dual operational amplifiers, but they are not electrically identical. The MC33502DG operates from 1.0 V to 7 V, whereas the TSV992AIDT is described as a 20 MHz gain-bandwidth dual amplifier optimized for higher common supply voltages. Confirm channel assignment, input bias behavior, output swing, stability, supply current, and package pinout before treating either device as a drop-in substitute.

엔지니어링 참조 데이터: MC33502DG — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC33502DG when a dual amplifier must operate at very low supply voltage, particularly from a 1.0 V rail, and rail-to-rail input and output behavior is valuable. Choose the TSV992AIDT when the application prioritizes a documented 20 MHz gain-bandwidth product and operates from higher nominal supply voltages. Consider the TS922AIDT when its 3 V and 5 V optimization aligns with the design, but verify its minimum supply and complete pin-level electrical behavior. None of these selections should rely on package appearance alone: the MC33502DG's low-voltage operation, output headroom, stability, offset, noise, and load capability should be compared against the actual signal path. For a new design, the MC33502DG is especially compelling when two related low-voltage analog functions justify using one dual package.

대체품과의 비교

파라미터 이 제품 TSV992AIDT TS922AIDT
Brand onsemi Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Channels 2 2 2
Input Common-Mode Operation Rail-to-rail Rail-to-rail Rail-to-rail
Output Operation Rail-to-rail Rail-to-rail Rail-to-rail

주요 차별점

  • Lower minimum supply requirement (vs TSV992AIDT)
  • Documented output swing margin (vs TS922AIDT)
  • Two-channel integration in 8-pin SOIC (vs LM2904PWR)

설계 노트

Place the supply-decoupling capacitor immediately between pins 8 and 4, with the shortest possible ground return. Because the MC33502DG can operate from 1.0 V, supply routing and bypass placement become particularly important as the available rail approaches the signal's operating range. Keep high-current switching-node copper away from the amplifier pins and use a quiet return path so that switching ripple is not coupled into the input or output nodes.

Route each inverting input directly to its feedback resistor or capacitor to minimize parasitic capacitance and susceptibility to interference. The non-inverting input should remain away from output routing, inductors, and switching nodes. For a dual amplifier in an 8-pin SOIC, check the placement of both channels so that a high-impedance input on one side is not surrounded by the output or supply pins of the other channel. Use a continuous ground plane unless the return-current path requires a deliberate split.

Do not assume rail-to-rail output reaches either supply voltage exactly. According to the onsemi MC33502 datasheet, the output can swing within 50 mV of each rail, leaving a margin that must be included in output-range calculations. Also avoid selecting a substitute solely by package outline: confirm channel assignment, supply limits, input common-mode range, output swing, stability, and load-drive capability before replacing the MC33502DG in an existing design.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The MC33502DG is an industrial-temperature general-purpose operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly identified in the manufacturer or listing information and therefore remain unknown.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MC33502DG datasheet MC33502DG pinout MC33502DG datasheet pdf MC33502DG equivalent MC33502DG replacement MC33502DG cross reference MC33502DG footprint MC33502DG price MC33502DG stock onsemi MC33502DG MC33502DG vs TSV992AIDT MC33502DG 1V rail to rail op amp MC33502DG SOIC-8 pinout MC33502DG low voltage sensor interface

관련 부품 & 용어

onsemi MC33502DG MC33502 TSV992AIDT TS922AIDT operational amplifier dual operational amplifier rail-to-rail input rail-to-rail output low-voltage amplifier analog signal conditioning voltage feedback gain-bandwidth product input common-mode range output swing 1.0 V minimum supply 7 V maximum supply 8-pin SOIC SOIC package family surface-mount device battery-powered electronics sensor interface current sensing industrial temperature grade RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기