NXP Semiconductors

MC33794EK Electric Field Imaging Device | NXP Semiconductors

부품 번호: MC33794EK ✓ 활성
7 mA Vdss 54-SOIC-EP Package 120 kHz Speed
MOQ: 1 |

MC33794EK 개요

The NXP Semiconductors MC33794EK is an electric field imaging device designed for noncontact object detection through external electrodes. It generates a low-frequency sine wave optimized for 120 kHz, drives the sensing electrodes, and interprets the resulting electric-field response. The device combines a sensor interface with logic input and logic output functions in a 54-SOIC-EP package. Its nominal supply current is 7 mA, and the specified operating temperature range is -40C to +85C. The MC33794EK is intended for applications where objects must be detected without physical contact, including capacitive proximity, occupancy, level, and material-presence sensing. It is available in tube packaging according to the MC33794EK ordering information.

An electric field imaging device is a specialized sensor-interface IC that excites an electrode array and evaluates how objects near those electrodes disturb the generated field. The MC33794 sits within the broader hierarchy of sensor and detector interfaces, analog sensing ICs, and integrated interface circuits. Unlike a simple mechanical or optical proximity sensor, the MC33794 measures the electrical effect of a target in its field, allowing design teams to implement noncontact detection with external electrodes.

The principal features of the MC33794EK include its internally generated excitation waveform, externally adjustable operating frequency, 120 kHz optimization, and low-distortion sine-wave output. Its logic input and logic output interfaces allow a host microcontroller to configure the device and read processed sensing results. The 54-SOIC-EP package provides the pin count required for multiple electrode channels and associated control signals, while its exposed-pad construction supports improved heat transfer when the device operates continuously.

The MC33794 generates the excitation signal through an internal oscillator whose frequency is adjusted with an external resistor. NXP describes the excitation waveform as a low-frequency sine wave optimized for 120 kHz. The sensing architecture then compares the electrode field response with the generated excitation so that changes caused by nearby objects can be converted into usable logic-level information. Exact oscillator accuracy, conversion timing, channel count, and internal gain values should be confirmed in the MC33794 datasheet before setting system timing budgets.

Typical applications include touchless control panels, appliance hand-presence detection, automotive interior occupancy sensing, industrial object-position detection, and liquid or material-level measurement behind an insulating surface. Because the sensing electrodes are external, the mechanical design of the target enclosure and the electrode geometry strongly influence sensitivity. Electrode area, spacing, guard-ring layout, and isolation distance all require experimental validation in the final mechanical assembly.

For PCB implementation, follow the exposed-pad land pattern and thermal-via recommendations shown in the NXP datasheet. Decoupling capacitors should be placed directly beside the supply and ground pins, while electrode and oscillator components should be kept short and isolated from noisy switching nodes. Because the device senses very small field changes, guarding, grounding, and clean analog layout are as important as the digital interface.

This page consolidates the NXP manufacturer datasheet, distributor package information, and application-oriented engineering guidance into one structured reference. It adds pinout- and layout-verification instructions, comparison rows for qualified alternatives, and practical sensor-layout guidance that engineers would otherwise need to piece together from multiple documents.

드롭인 대체품: MC33794EK — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MC33794EF

✅ 드롭인 ⚠️ 사양 미검증
📦 54-SOIC-EP
Same MC33794 electric field imaging family and 54-SOIC-EP footprint; order-code-specific temperature and package options must be confirmed in the NXP ordering table

📋 참조 대체품 (카탈로그에 없음)

MC33794EK/R2

✅ 드롭인
📦 54-SOIC-EP
Same 54-SOIC-EP device and -40C to +85C range as MC33794EK/R2; revision ordering suffix identifies the device revision

📋 참조 대체품 (카탈로그에 없음)

MC33794E

✅ 드롭인 ⚠️ 사양 미검증
📦 54-SOIC-EP
Same MC33794 family with identical electric field imaging function; verify the exact package drawing and terminal assignment against the NXP ordering table

📋 참조 대체품 (카탈로그에 없음)

MC33794EK 사양

Device Type Electric field imaging device
Sensor Interface Type Logic input, logic output
Number of Terminals 54
패키지 54-SOIC-EP
Package Body Width 7.50 mm
Package Length 0.295 inch
실장 유형 Surface mount
공급 전류 7 mA
Excitation Signal Low-frequency sine wave
Optimized Excitation Frequency 120 kHz
Frequency Adjustment External resistor
동작 온도 범위 -40C to +85C
Temperature Grade Industrial
Packaging Tube
인터페이스 ISO9141
Package Shape Rectangular

MC33794EK rectangular 핀 구성 가이드

MC33794EK(rectangular 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

MC33794EK의 rectangular 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC33794EK.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC33794EK 적합 용도: 6 애플리케이션s: Noncontact Touchless Controls, Appliance Hand-Presence Detection, Automotive Interior Presence Detection, Liquid Level Sensing Behind Insulation, Industrial Object Presence and Positioning, Material Presence and Through-Wall Detection.

🔧

Noncontact Touchless Controls

The MC33794EK is suited to touchless user interfaces because external electrodes can detect a finger approaching a sealed panel without mechanical contact. Its internally generated sine-wave excitation and logic interface provide a defined path from field measurement to host-controller decision. Place the electrodes behind a nonconductive fascia and evaluate sensitivity against panel thickness, moisture, and grounding. Unlike a mechanical pushbutton, the approach can eliminate moving contacts while preserving a sealed front surface.

🔧

Appliance Hand-Presence Detection

The MC33794EK can detect a user's hand near an appliance door or control panel, allowing functions to start only when a person is present. Its -40C to +85C range covers many appliance and industrial environments, while the 7 mA supply current supports low-power system designs. Electrode geometry should be tuned to the distance where activation is required, and the logic output can be combined with a timer in the host controller to avoid unintended restarts.

🔧

Automotive Interior Presence Detection

The MC33794EK supports noncontact presence detection inside a vehicle cabin, where seat occupancy, console touch, or door-interior sensing is required. Its external electrodes can be integrated into trim surfaces, and the 54-SOIC-EP package provides a controlled, repeatable mounting solution. Engine-start or safety-related functions additionally require automotive qualification verification, EMC validation, transient protection, and a documented fault strategy rather than reliance on the temperature rating alone.

🔧

Liquid Level Sensing Behind Insulation

The MC33794EK can be evaluated for level detection when electrodes are mounted outside a nonmetallic vessel. The device excites the electrode field and detects changes associated with the material above or below a target boundary. Performance depends on liquid conductivity, dielectric constant, wall thickness, and electrode spacing, so each tank design requires calibration. The noncontact arrangement avoids inserting a probe into the fluid and reduces maintenance, but it must also tolerate changing dielectric properties.

🔧

Industrial Object Presence and Positioning

The MC33794EK fits industrial systems that need to confirm whether a part is present in a fixture or positioned near a process area. External electrodes can be positioned around plastic guards and tooling to create a controlled sensing field without touching precision parts. The MC33794 logic interface allows a PLC or embedded controller to evaluate the result. Because nearby metal, cables, and moving fixtures alter field coupling, final sensitivity must be established with the production mechanical assembly in place.

🔧

Material Presence and Through-Wall Detection

The MC33794EK can support material-presence checks where an object must be identified through a thin insulating barrier. The excitation and sensing electrodes operate from the same IC platform, reducing the need for a separate analog oscillator. Compared with optical detection, an electric field approach can work without a clear line of sight, although the barrier material and object conductivity still control coupling. Design validation should sweep target position and temperature to establish reliable detection thresholds.

What is the MC33794EK used for?
The NXP MC33794EK is an electric field imaging device used for noncontact object detection with external electrodes. It generates an excitation waveform, senses field changes caused by nearby objects, and presents logic-level information for a host controller. The manufacturer identifies noncontact sensing as the primary application, making the device suitable for presence detection, touchless controls, and material-level sensing when the target enclosure and electrode geometry can be engineered for the measurement.
How does the MC33794EK detect objects without contact?
The MC33794EK detects objects by driving external electrodes with a low-frequency sine wave and evaluating how a nearby object changes the electric field. According to the NXP MC33794 datasheet, the device creates an electric field through connected electrodes and uses field disturbances to identify objects. The excitation frequency is set with an external resistor, and the waveform is optimized for 120 kHz, giving the system a defined operating point for front-end design.
What is the operating frequency of the MC33794EK?
The MC33794EK excitation frequency is adjustable with an external resistor and is optimized for 120 kHz. NXP describes the generated signal as a low-frequency sine wave with very low distortion. Actual operating frequency depends on the selected external resistor and the tolerances of the associated timing network, so the resistor value and its temperature coefficient should be checked against the manufacturer guidance before production release.
What package and pin count does the MC33794EK use?
The MC33794EK is supplied in a 54-SOIC-EP surface-mount package with a 0.295 inch by 7.50 mm body and an exposed pad. The 54-terminal count is confirmed by both distributor listings and the MC33794 ordering information. Use the exposed-pad footprint and thermal-via layout in the NXP package drawing when creating the PCB land pattern and connecting the pad to the ground plane.
Where can I download the MC33794EK datasheet PDF?
The official MC33794 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/MC33794.pdf. It covers the electric field imaging architecture, external-electrode connection, oscillator and frequency-adjustment details, logic interfaces, electrical characteristics, ordering information, and package drawings. The MC33794EK is ordered as a 54-SOIC-EP device, so the pin descriptions and exposed-pad recommendations in that document apply directly to the target part.
What is the supply current of the MC33794EK?
The MC33794EK has a listed supply current of 7 mA. Because the value comes from the device catalog information rather than a complete operating-point table, confirm the corresponding supply voltage, output state, and electrode loading in the MC33794 datasheet. Designers should also budget additional supply current for the external excitation network, decoupling capacitors, and any host circuitry connected to the logic interface.
What is the operating temperature range of the MC33794EK?
The MC33794EK operates from -40C to +85C and is categorized as an industrial-temperature device. This range makes it suitable for industrial control equipment, automotive environments, and appliances where internal temperatures can exceed commercial limits. Thermal design should still account for the exposed thermal pad, board copper, ambient temperature, and heat generated by adjacent components.
MC33794EK versus MC33794EF: which package should I choose?
MC33794EK is the 54-SOIC-EP ordering option with an exposed pad, while the package details of other MC33794 order codes must be confirmed from the NXP ordering table. Both devices belong to the same electric field imaging family, so the electrical function is similar, but a board redesign is required if the physical package differs. Use the ordering-information table in the manufacturer datasheet to verify the package drawing and terminal arrangement before substitution.
When should I choose the MC33794EK over another electric field sensor?
Choose the MC33794EK when the design requires an integrated excitation source, external electrodes, logic-level interfacing, and operation across -40C to +85C. It is preferable to discrete oscillator and measurement circuitry when consistent factory-adjusted behavior and reduced external design effort are priorities. It may be less suitable when the sensing target requires a different frequency band, more measurement channels, or a package that can be reflowed without an exposed-pad process.
Is the MC33794EK suitable for noncontact liquid-level sensing?
The MC33794EK can support noncontact liquid-level sensing because its external electrodes can be positioned behind an insulating tank wall and the device detects changes in the surrounding electric field. Success depends on electrode geometry, dielectric properties, liquid conductivity, wall thickness, and calibration stability. Validate the complete mechanical and fluid arrangement before production because a laboratory response may not transfer directly to every tank material and installation.
Can I use the MC33794EK for automotive occupancy detection?
The MC33794EK can be evaluated for automotive interior occupancy and presence detection because it performs noncontact electric field sensing and covers -40C to +85C. Automotive qualification still requires confirmation of AEC-Q100 status, electromagnetic compatibility, transient protection, and production traceability. Do not treat the temperature rating alone as evidence of full automotive qualification, and check the current NXP product documentation before committing a safety-related design.
What can replace the MC33794EK?
A drop-in replacement for the MC33794EK must use the same 54-SOIC-EP footprint, preserve the terminal functions, and match the excitation frequency, supply current, logic interface, and operating-temperature requirements. The verified cross-reference results identify the MC33794 family but do not establish a qualified cross-brand substitute. Therefore, treat MC33794 order-code variants as the primary alternatives and validate any third-party device with a complete pin, waveform, and application-level comparison.
How should the MC33794EK PCB layout be designed?
Place the MC33794EK decoupling capacitors directly beside the supply and ground pins, connect the exposed pad to a solid ground plane with thermal vias, and keep oscillator and electrode traces short. According to the manufacturer application guidance, the device depends on weak electric-field signals, so noisy switching traces, inductors, and high-current return paths should be kept away from the analog section. Use the reference footprint and layout examples in the MC33794 datasheet as the starting point.
Why does the MC33794EK include an exposed pad?
The exposed pad in the 54-SOIC-EP package provides a low-resistance thermal path from the device to the PCB. It should be soldered to the board and connected to the ground plane using the recommended via pattern rather than left floating. The exposed pad is a thermal and grounding feature, not an additional signal pin, and the package drawing defines its exact dimensions and placement.
How do I request a price and lead time for the MC33794EK?
Use the Request a Quote form on this page to request the current unit price, volume tiers, stock status, and manufacturing lead time for MC33794EK. Quote-based confirmation is appropriate because pricing and availability can change with order quantity, date, and packaging configuration. When requesting a quotation, identify the required tube packaging quantity, target delivery date, and whether any automotive qualification documentation is needed.
What are the key specifications of the MC33794EK that engineers should know?
The MC33794EK is a 54-terminal electric field imaging device in a 54-SOIC-EP surface-mount package. Its key documented characteristics are a 7 mA supply current, a -40C to +85C operating range, an adjustable low-frequency sine-wave excitation optimized for 120 kHz, and logic input and logic output interfaces. Tube packaging is specified for the EK order code. These parameters define the electrical, mechanical, and sourcing baseline for an equivalent-device evaluation.

엔지니어링 참조 데이터: MC33794EK — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC33794EK when the product needs integrated, noncontact electric field sensing with external electrodes, a resistor-adjustable excitation signal, and logic-level interfacing in an industrial-temperature surface-mount package. It is particularly appropriate for sealed touchless controls, appliance presence detection, and carefully engineered liquid-level or material-presence systems. MC33794 family order codes are the safest alternatives when an exact package and pin arrangement must be retained, but their order-code-specific temperature and documentation requirements still need confirmation. Avoid a drop-in substitution from another manufacturer unless a qualified source confirms the 54-SOIC-EP footprint, terminal functions, excitation behavior, supply current, and operating range. This device is not a universal proximity-sensor replacement; electrode geometry, target material, enclosure construction, and calibration determine whether it can meet the required detection distance and false-alarm limits.

대체품과의 비교

파라미터 이 제품 MC33794EF MC33794EK/R2 MC33794E
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 54-SOIC-EP 54-SOIC-EP 54-SOIC-EP 54-SOIC-EP
Terminal Count 54 54 54 54
Device Function Electric field imaging device Electric field imaging device Electric field imaging device Electric field imaging device
Excitation Signal Low-frequency sine wave Low-frequency sine wave Low-frequency sine wave Low-frequency sine wave
Optimized Frequency 120 kHz 120 kHz 120 kHz 120 kHz
Supply Current 7 mA 7 mA 7 mA 7 mA
Operating Temperature Range -40C to +85C -40C to +85C -40C to +85C -40C to +85C
Input Interface Logic Logic Logic Logic
Output Interface Logic Logic Logic Logic

주요 차별점

  • Integrated electric field excitation and sensing interface (vs MC33794EF)
  • Wide industrial operating range (vs MC33794E)
  • High pin count for electrode and control connectivity (vs MC33794EK/R2)

설계 노트

Place input and output decoupling capacitors directly beside their corresponding supply and ground pins, and keep the traces short. The MC33794 senses small electric-field changes, so routing the electrode and oscillator area near switching converters, relays, or high-current return paths can raise noise and produce false detections. Use a continuous ground reference beneath the analog section and connect the exposed pad to ground through the package-recommended thermal-via pattern.

Design the external electrodes as part of the mechanical system rather than as isolated copper shapes. Electrode area, spacing, overlap, guard structures, and the dielectric distance to the target directly determine field coupling and sensitivity. Model a nominal geometry, fabricate several variations if necessary, and calibrate each mechanical revision because a change in enclosure material can shift detection thresholds as much as an electrical component change.

Do not assume that a catalog-level 120 kHz optimization guarantees a fixed operating frequency in every circuit. The excitation frequency is adjusted with an external resistor, and component tolerance, temperature, and the surrounding electrode network can affect the final signal. Follow the manufacturer reference circuit and component-selection guidance, then measure the waveform at the relevant pins in the assembled product before setting software thresholds.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The verified product information identifies the MC33794EK as an industrial-temperature electric field imaging device but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm current declarations with NXP before release to a regulated market.

관련 검색

MC33794EK datasheet MC33794EK pinout MC33794EK datasheet pdf MC33794EK equivalent MC33794EK replacement MC33794EK cross reference MC33794EK 54 SOICW-EP MC33794EK application circuit MC33794EK price MC33794EK stock NXP MC33794EK MC33794 electric field imaging device MC33794EK vs MC33794EF

관련 부품 & 용어

NXP Semiconductors MC33794EK MC33794 MC33794EF MC33794EK/R2 electric field imaging device sensor interface IC interface integrated circuit noncontact sensing external electrodes logic input logic output low-frequency sine wave 120 kHz resistor-adjusted oscillator supply current 7 mA 54-SOIC-EP SOIC package family surface-mount package exposed pad ISO9141 electric-field imaging capacitive proximity sensing liquid-level sensing touchless control industrial temperature grade
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기