MC68060RC50 - 50MHz 32-Bit M68060 Processor | NXP
부품 번호: MC68060RC50 ✗ 단종MC68060RC50 개요
A microprocessor is the central processing component of a computer or embedded controller. The M68060 architecture extends the M68000 family with a superscalar execution core capable of evaluating multiple instructions in parallel. The MC68060RC50 integrates instruction and data caches, an MMU for virtual memory management, and an FPU for high-precision floating-point calculations. Its architecture therefore sits between a general-purpose processor and a dedicated digital signal processor within embedded power-management and control hierarchies.
The principal identified specifications are a 50 MHz clock, 32-bit architecture, one processor core, cache support, MMU support, FPU support, and a 206-pin PGA package. The 206-pin package provides the signal interface and power distribution required by this high-performance processor implementation. Its 47.25 mm by 47.25 mm body dimensions make board layout and thermal design materially more demanding than those of a modern surface-mount microcontroller.
The MC68060 is positioned as a superscalar member of the first-generation M68060 product line. Superscalar execution allows the processor to increase instruction throughput by dispatching independent instructions concurrently, while the cache reduces the performance penalty of frequent external-memory accesses. The MMU adds address translation and memory-protection capabilities that support controlled multitasking and isolated memory spaces. The integrated FPU accelerates floating-point workloads without requiring an external coprocessor.
Typical legacy uses include industrial control systems, embedded communications equipment, data acquisition controllers, networking appliances, and test equipment that already use the M68000 software ecosystem. Because the device relies on a large through-hole PGA package, replacement projects must preserve the original footprint, pin assignment, power rails, clock design, reset circuitry, and bus termination. Software migration is also a material consideration because existing M68000 applications may require performance-oriented M68060-specific optimizations.
Power and signal integrity are the principal implementation challenges. The processor's PGA package and high pin count require careful via routing, adequate return paths, decoupling near the supply pins, and controlled impedance on external-bus signals. The system should use the manufacturer's pin-description table and package-information document when assigning every PCB net and when calculating trace widths, via counts, and copper requirements.
This page combines the verified processor identity, package information, lifecycle considerations, drop-in-family comparisons, and practical PCB guidance into a focused engineering reference. It also identifies where a replacement cannot be treated as automatic: electrical characteristics, cache organization, initialization behavior, and software compatibility must be reviewed before a substitute is released into production.
드롭인 대체품: MC68060RC50 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC68060RC50 (동일 폼 팩터 및 풋프린트) — 차이점: Mounting Type, Data Cache, Instruction Cache, RoHS Status, Architecture.
MC68LC060RC50
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MC68EC060RC50
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MC68060RC66
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MC68LC060RC66
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MC68EC060RC66
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →MC68060RC50 최대 정격 & 전기적 특성
| Processor Family | M68060 |
| Architecture | 32-bit |
| Core Count | 1 core |
| 최대 클록 주파수 | 50 MHz |
| Instruction Set | M680x0 |
| Execution Architecture | Superscalar |
| Cache Support | Yes |
| Memory Management Unit | Yes |
| Floating-Point Unit | Yes |
| Package Type | 206-pin PGA |
| Package Dimensions | 47.25 mm x 47.25 mm |
| 실장 유형 | Through-hole PGA |
| Manufacturer | NXP Semiconductors |
| Product Generation | First-generation M68060 product line |
MC68060RC50 47.25 mm x 47.25 mm 핀 구성 가이드
MC68060RC50(47.25 mm x 47.25 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC68060RC50.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC68060RC50 적합 용도: 6 애플리케이션s: Legacy Industrial Control Systems, Embedded Communications Equipment, Data Acquisition and Test Systems, Networking and Protocol Gateways, Precision Motion Controllers, Aerospace and Defense Legacy Modules.
Legacy Industrial Control Systems
The MC68060RC50 fits legacy industrial controllers that already use the M68000 instruction set, bus architecture, and development toolchain. Its 50 MHz 32-bit core, cache, MMU, and integrated FPU provide a capable platform for motion coordination, supervisory logic, and data processing without changing the processor architecture. The 206-pin PGA footprint requires an existing through-hole board design or a careful reproduction. The principal trade-off is package size: engineers gain processor capability and memory protection but must accept a 47.25 mm by 47.25 mm footprint, dense via routing, and increased board complexity compared with a compact modern microcontroller.
추천
Embedded Communications Equipment
MC68060RC50 can serve as the processing engine in legacy communications equipment where protocol handling, buffering, and memory management are more substantial than in a small microcontroller. The 50 MHz single-core design, 32-bit architecture, cache, MMU, and FPU support multitasking software and protocol workloads based on the M68000 ecosystem. A same-family 50 MHz alternative may fit when low-power behavior is preferred, while a 66 MHz member may provide more throughput if bus timing and software qualify. The PGA package and obsolete lifecycle status make component continuity, thermal planning, and long-term supply agreement essential engineering considerations.
추천
Data Acquisition and Test Systems
The MC68060RC50 is appropriate for a legacy data-acquisition or test controller that combines real-time control with substantial host-side computation. Its 50 MHz 32-bit core and floating-point unit can support signal-processing calculations, while the MMU can isolate operating-system and application memory. Cache helps reduce the impact of external-memory access during data transfer. The processor does not simplify the hardware design: a 206-pin PGA requires a multilayer PCB, numerous routed connections, controlled-impedance review, and local supply decoupling. A 50 MHz family alternative can preserve the same architectural class when its cache and initialization behavior match the existing system.
추천
Networking and Protocol Gateways
MC68060RC50 is suitable for a legacy protocol gateway whose networking stack, routing table, and management interface rely on the M68000 software environment. The 50 MHz processor, cache, MMU, and FPU allow the system to combine packet processing with protected memory spaces. A 66 MHz M68060-family member may improve compute headroom by 32% without changing the general processor family, but timing, power, and software timing assumptions must be reviewed. The large PGA package also makes connector density and mechanical clearance important. Maintenance of an installed gateway can justify the legacy footprint, but new designs should compare a platform redesign against continued M68060 sourcing.
추천
Precision Motion Controllers
MC68060RC50 fits a legacy precision-motion controller when real-time sequencing must be combined with 32-bit arithmetic, protected memory, and floating-point computation. The 50 MHz clock provides the execution capability for coordinate calculations and supervisory control, while cache and the MMU support larger firmware and operating environments. The processor remains a complex PGA component rather than a simple real-time microcontroller, so board designers must allocate careful routing and power-delivery resources. A 50 MHz low-power or EC060 family option may serve as a drop-in candidate when its exact cache and electrical characteristics meet the machine's requirements.
추천
Aerospace and Defense Legacy Modules
MC68060RC50 may appear in legacy aerospace, defense, or ruggedized modules where an established M68060-based design has extensive qualification history. Its 32-bit M68060 architecture, cache, MMU, and FPU support complex control and signal-processing software. The processor's AEC-Q100 status is not relevant to aerospace qualification, and no specific aerospace qualification is stated, so compliance documentation must be reviewed independently. Because the 206-pin PGA package is large and the product is obsolete, maintaining an existing module requires controlled procurement, traceable parts, and careful electrical equivalence review rather than an informal marketplace substitution.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC68060RC50 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC68LC060RC50 | MC68EC060RC50 | MC68060RC66 | MC68LC060RC66 | MC68EC060RC66 |
|---|---|---|---|---|---|---|
| Package | 206-PGA (47.25 x 47.25 mm) | 206-PGA (47.25 x 47.25 mm) | 206-PGA (47.25 x 47.25 mm) | 206-PGA (47.25 x 47.25 mm) | 206-PGA (47.25 x 47.25 mm) | 206-PGA (47.25 x 47.25 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz | 66 MHz | 66 MHz | 66 MHz |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Execution Architecture | Superscalar M68060 | M68060-family superscalar | M68060-family superscalar | Superscalar M68060 | M68060-family superscalar | M68060-family superscalar |
| Cache Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Memory Management Unit | Yes | Yes | Yes | Yes | Yes | Yes |
| Floating-Point Unit | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Conventional 50 MHz M68060 configuration (vs MC68EC060RC50)
- Lower clock target can simplify legacy timing margin (vs MC68060RC66)
- Full high-performance M68060 feature identification (vs MC68LC060RC50)
설계 노트
Use the 206-pin PGA package drawing and pin-description table to create the board footprint. Preserve the published 47.25 mm by 47.25 mm body dimensions, pin numbering, and connector alignment rather than deriving dimensions from a generic PGA footprint. After routing, compare every assigned net against the package document and inspect the assembled board for orientation, via shorts, and connector clearance before applying power.
The 206-pin PGA provides dedicated supply connections, so the power network should be designed as a controlled distribution system rather than a collection of point-to-point traces. Place required decoupling capacitors close to the associated device pins, maintain short and wide supply paths, and provide a continuous reference plane. Confirm capacitor values, rail voltages, sequencing, and allowable startup behavior against the full manufacturer datasheet before component selection.
External processor-bus signals should be routed on a controlled-impedance layer with short return paths and minimal unnecessary stubs. Review clock distribution, reset timing, and any high-speed bus behavior using the manufacturer timing specifications. For a legacy PGA design, via resistance, solder wicking, thermal cycling, and connector-induced discontinuity can affect reliability, so include those effects in the PCB stack-up and assembly review.
Do not treat another M68060-family member as an automatic replacement merely because it has a similar package name. Confirm the clock frequency, supply voltage, cache organization, reset sequence, bus timing, floating-point behavior, and software initialization assumptions for every board revision. MC68LC060 and MC68EC060 family differences may affect power or cache behavior, while a 66 MHz device changes the clock relationship by 32%.
규정 준수 정보
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified for MC68060RC50. AEC-Q100 is not applicable to this general-purpose legacy microprocessor.