Motorola

MC68322FT20 - 16-Bit 20 MHz M683XX Processor | Motorola

부품 번호: MC68322FT20 ✗ 단종
160-QFP Package 20 MHz Speed
MOQ: 1 |

MC68322FT20 개요

The Motorola MC68322FT20 is a 16-bit microprocessor built around the M683XX embedded-processor family, operating at up to 20 MHz with one core in a 160-lead QFP package measuring 28 mm by 28 mm. Its primary characteristics are a 16-bit processor architecture, 20 MHz operating frequency, single-core implementation, and the 160-QFP (28 x 28 mm) package identified for the exact MC68322FT20 ordering code.

A microprocessor IC is the central processing component of an embedded system. Unlike a general-purpose desktop CPU, this device targets embedded control, communications, industrial, and legacy equipment designs where deterministic software execution and a stable peripheral interface are more important than processor scaling. In the product hierarchy, MC68322FT20 is a microprocessor IC, an embedded processor, and a member of the M683XX family. The “F” package designator and “T20” ordering suffix distinguish this exact 20 MHz, 160-QFP configuration from other MC68322 variants.

The principal feature set established for MC68322FT20 includes one 16-bit processing core, a maximum clock frequency of 20 MHz, and a 160-QFP (28 x 28 mm) surface-mount package. These figures place the component in the legacy embedded-control class, where the processor operates as the system controller rather than as a host processor. Its 160 leads provide substantially more interface and power connectivity than a modern low-pin-count microcontroller, which is important when maintaining a complex legacy motherboard layout.

MC68322FT20 belongs to the Motorola M683XX architecture and carries the EC000 classification in the distributor listing. Its 16-bit architecture and 20 MHz clock are consistent with systems designed around M683XX software, peripheral mappings, and established board-level interconnects. Design migration must account for the complete legacy hardware environment rather than treating processor speed as the only compatibility criterion. Memory organization, bus timing, peripheral functions, reset behavior, and electrical characteristics must be confirmed against the manufacturer documentation before any redesign.

Typical uses include industrial controllers, communications equipment, embedded instrumentation, and service systems built around the M68322 processor. In these applications, the 20 MHz clock provides the execution rate, the 16-bit instruction and data environment supports the original control software, and the 160-QFP footprint preserves compatibility with densely routed legacy boards. Replacement or modernization should normally begin with a complete system audit because a package match alone does not establish software, clock, memory, and peripheral compatibility.

The primary PCB-design consideration is that MC68322FT20 requires the exact 160-QFP land pattern, correct pin assignment, and layout rules associated with the 28 x 28 mm package. Existing boards should not be treated as generic QFP replacements. Confirm every power pin, ground connection, clock source, reset path, and peripheral signal against the manufacturer pin-description table before assembly or board rework.

This product page combines the exact orderable MPN, processor classification, clock rating, package information, sourcing guidance, and engineering-oriented comparison guidance. It also highlights the practical distinction between an exact legacy replacement and a merely similar embedded processor, helping teams protect board compatibility, software continuity, and long-term serviceability.

드롭인 대체품: MC68322FT20 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

MC68322FT20 최대 정격 & 전기적 특성

Device Type Microprocessor IC
Processor Family M683XX
Core Count 1 core
Processor Bit Width 16-bit
최대 클록 주파수 20 MHz
Package Type 160-QFP
Package Dimensions 28 mm x 28 mm
실장 유형 Surface mount
Lead Count 160 leads
Manufacturer Product Class EC000

MC68322FT20 28 mm x 28 mm 핀 구성 가이드

MC68322FT20(28 mm x 28 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MC68322FT20의 28 mm x 28 mm 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC68322FT20.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC68322FT20 적합 용도: 6 애플리케이션s: Legacy Industrial Controller, Industrial Communications Equipment, Embedded Test and Measurement, Legacy Automotive Electronics, Embedded Instrumentation, Communications and Networking Equipment.

🏭

Legacy Industrial Controller

The MC68322FT20 fits service and production-continuity work involving an existing M68322-based industrial controller because it preserves the original 16-bit processor architecture, 20 MHz operating class, and 160-QFP board footprint. It can execute the established control software and interface with the controller's original memory and peripheral circuitry without requiring a complete platform migration. The principal design consideration is compatibility verification: input voltage, clock behavior, reset sequencing, bus timing, and pin assignments must match the installed board. Because the processor is a legacy embedded part, procurement should focus on traceable inventory and exact suffix matching rather than treating every MC68322 listing as interchangeable.

🌐

Industrial Communications Equipment

The MC68322FT20 is appropriate for maintaining communications equipment whose protocol engine and supervisory control were built around an M68322 processor. Its 16-bit execution environment and 20 MHz clock support the original communications-control workload, while the 160-QFP package maintains the established board interface. When repairing or extending such equipment, validate the clock source, handshake timing, memory configuration, and peripheral routing against the manufacturer documentation. The part's main advantage is software and hardware continuity: engineers can retain validated firmware behavior while obtaining a configuration that matches the original controller architecture.

🔧

Embedded Test and Measurement

The MC68322FT20 can support service of older embedded test and measurement systems that use the M68322 for sequencer control, data acquisition coordination, or front-panel logic. The confirmed 20 MHz clock and single 16-bit core suit the processor-control role, while the 160-QFP package preserves a complex legacy motherboard without requiring a general-purpose processor with a different pinout. Before installation, confirm signal levels, timing margins, memory timing, reset behavior, and grounding. For new measurement platforms, a newer controller may be easier to source, but MC68322FT20 is valuable when modifying certified or field-proven equipment where changing the processor architecture would create unnecessary validation risk.

🚗

Legacy Automotive Electronics

The MC68322FT20 may be used in the repair or preservation of older vehicle electronics based on the M68322 architecture, where the established 16-bit firmware and 20 MHz timing environment must be retained. Its 160-QFP package enables use on the original controller board, but temperature rating, electrical limits, qualification, and functional safety expectations must be checked before deployment. The processor's role should remain within a previously validated design unless a complete automotive requalification program is undertaken. For new vehicle platforms, designers should normally evaluate current automotive-qualified microcontrollers instead of introducing this legacy processor.

📺

Embedded Instrumentation

The MC68322FT20 is suitable for sustaining embedded instrumentation platforms whose data-acquisition sequencing, calibration control, and operator-interface logic depend on an original M68322 system. The 16-bit processor and 20 MHz operating frequency suit supervisory embedded tasks, and the 160-QFP package avoids changing the board footprint in a mature instrument. A restoration project should begin with a complete pin, power, and clock audit, followed by firmware and peripheral regression testing. This approach is most advantageous for instruments that are already deployed and difficult to recertify. New instruments can benefit from newer integrated controllers, but migration would involve software, board, and validation work beyond a processor substitution.

🌐

Communications and Networking Equipment

The MC68322FT20 can serve in service applications for older communications infrastructure, including protocol converters, interface controllers, and embedded network equipment centered on the M68322 processor. Its 20 MHz, single-core, 16-bit configuration matches the performance class of the original design, and the 160-QFP package preserves the existing board-level connections. Engineers must verify the network PHY or transceiver interface, memory timing, clock source, and reset behavior separately from the processor itself. For infrastructure refreshes, a modern controller offers broader software support and lifecycle advantages, but MC68322FT20 enables a lower-risk continuity strategy when replacing the original processor without redesigning the surrounding equipment.

What is the MC68322FT20?
The MC68322FT20 is a single-core, 16-bit Motorola M683XX microprocessor operating at up to 20 MHz in a 160-QFP package. The distributor listing identifies the device as an M683xx microprocessor IC with a 28 mm by 28 mm package. It is intended for legacy embedded-control systems rather than general-purpose computing, where deterministic control, established software, and long-lived board compatibility are the principal requirements.
What is the operating frequency of the MC68322FT20?
The MC68322FT20 operates at up to 20 MHz. This clock rating identifies the exact T20 configuration of the MC68322 family and is the basis for matching the processor to legacy timing assumptions. Before replacing it, verify the original board clock source, reset sequence, bus timing, and memory configuration, because a processor with a similar clock rating is not necessarily a functional replacement for the complete M68322 system.
What package does the MC68322FT20 use?
The MC68322FT20 uses a 160-QFP package measuring 28 mm by 28 mm. The 160-lead surface-mount footprint has a defined pin arrangement that must match the manufacturer documentation exactly. It should not be treated as a generic QFP footprint, and an existing board should only be reused after every power, ground, clock, reset, and peripheral connection has been checked against the device pin table.
Is MC68322FT20 a microcontroller or microprocessor?
MC68322FT20 is classified as a microprocessor IC in the M683xx family. It is an embedded processor designed to control a system rather than a small microcontroller with integrated memories and a compact pin count. Its 16-bit processing architecture and 160-QFP package distinguish it from common 8-bit or 32-bit microcontrollers used in modern compact embedded products.
Where can I download the MC68322FT20 datasheet?
The MC68322 datasheet is accessible through the linked MC68322 PDF page, which specifically identifies MC68322FT20 and provides the legacy processor documentation. Use the manufacturer document for final pin assignments, electrical limits, memory characteristics, clock requirements, and peripheral functions. The distributor links provide sourcing and product summaries, but the processor datasheet should govern every hardware-design decision.
Where can I find the MC68322FT20 pinout?
The MC68322FT20 pinout must be taken from the pin-description table in the MC68322 manufacturer documentation for the 160-QFP, 28 mm by 28 mm configuration. The searchable listing confirms the package and lead count but does not reproduce the 160 pin assignments. Use the document's device pin list when inspecting a PCB, building an adapter, or creating a replacement board.
What is the best drop-in replacement for MC68322FT20?
No drop-in replacement is established for MC68322FT20 because the available cross-reference results do not identify a pin-compatible substitute with verified electrical and software equivalence. A true drop-in candidate must match the 160-QFP footprint, 20 MHz timing assumptions, M683XX bus behavior, memory interface, peripherals, reset behavior, and power requirements. Treat similar MC68322 speed or package variants as possible candidates only after obtaining their exact datasheets and completing a system-level compatibility review.
Can an MC68322FT20 replace another M68322 processor?
The MC68322FT20 can be considered only when the other M68322 device has the same 160-QFP footprint, 20 MHz operating rating, compatible supply and clock requirements, and matching memory and peripheral functions. These conditions must be verified from both manufacturers' documentation. Processor-family similarity alone does not establish drop-in compatibility, particularly for clock, mask, and temperature suffixes.
MC68322FT20 vs a generic embedded processor: which is better for legacy equipment?
The MC68322FT20 is better when preserving an existing M683XX system because it retains the original 16-bit architecture, 20 MHz timing basis, M683XX processor family, and 160-QFP board interface. A modern embedded processor may offer better performance or integration, but it can require software, memory-map, peripheral, and PCB changes. The correct choice depends on whether uninterrupted legacy operation matters more than redesign flexibility.
When should I choose MC68322FT20 instead of a cross-brand embedded processor?
Choose MC68322FT20 when maintaining an existing M68322-based board is the primary objective and the exact 20 MHz, 160-QFP configuration has been confirmed. A cross-brand processor is preferable only when a full board redesign, software port, and validation program are acceptable. The legacy part offers the strongest route to preserving established hardware behavior, while a newer processor can improve performance only at the cost of integration work.
Is MC68322FT20 suitable for industrial control systems?
The MC68322FT20 can be suitable for service and modernization of industrial equipment originally designed around the M68322 processor because it preserves the established 16-bit architecture and 20 MHz operating class. Suitability for a new industrial design still requires confirmation of temperature grade, electrical limits, long-term availability, and system certification. Its strength is legacy continuity rather than new-design feature density.
What can replace the MC68322FT20?
The MC68322FT20 has no verified drop-in replacement in the available component records. The cross-reference pages provide search tools, not a confirmed 160-QFP, pin-compatible substitute. Engineers should search for the exact legacy device by ordering code and package, then validate clock, memory, peripheral, reset, electrical, and software compatibility before approving any alternative. Avoid accepting a recommendation based solely on the M68322 family name or clock frequency.
Is MC68322FT20 the same as an MC68322 with a different suffix?
No assumption should be made that another MC68322 suffix is interchangeable with MC68322FT20. The FT20 ordering code identifies a specific 20 MHz, 160-QFP configuration, and other suffixes may change speed, package, temperature range, or qualification. A valid substitution requires exact package dimensions, lead assignment, pinout, operating limits, clock rating, and functional compatibility.
Where can I buy MC68322FT20 and check current availability?
Use the Request a Quote form on this page to request the current MC68322FT20 price, stock position, lead time, and minimum order quantity. The manufacturer part number is MC68322FT20, and the exact suffix should be entered to prevent confusion with other MC68322 configurations. For obsolete or long-lived parts, written confirmation of stock, traceability, condition, and packaging is especially important before committing a production build.
What are the key specifications of MC68322FT20 that engineers should know?
The key confirmed specifications are one 16-bit processor core, a 20 MHz operating frequency, and a 160-QFP package measuring 28 mm by 28 mm. The device belongs to the Motorola M683XX embedded-processor family and is classified as an EC000 microprocessor. Supply voltage, memory organization, peripherals, temperature range, and absolute electrical limits require confirmation from the manufacturer datasheet before schematic or PCB validation.

엔지니어링 참조 데이터: MC68322FT20 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MC68322FT20 when maintaining an existing M68322-based board is more important than adopting a modern processor platform. Its confirmed identity as a single-core, 16-bit, 20 MHz device in a 160-QFP package provides the best path to preserving legacy firmware, bus behavior, and physical layout. A cross-brand embedded processor should be considered only for a deliberate redesign, because the available cross-reference results do not identify a verified pin-compatible substitute. Similar MC68322 variants may differ in clock, temperature, qualification, or package suffix and therefore require individual datasheet review. For obsolete industrial, communications, instrumentation, or vehicle electronics, prefer MC68322FT20 when exact-ordering-code continuity, original software behavior, and minimal board change outweigh the benefits of newer silicon. For a new design, evaluate current processors against functional requirements, supply continuity, development-tool support, and certification needs rather than selecting this legacy part by default.

설계 노트

Treat the 160-QFP, 28 mm by 28 mm land pattern as a device-specific footprint. Before rework, compare the board's pin-1 orientation, pad dimensions, lead pitch, and exposed pad configuration with the package drawing for MC68322FT20. Do not infer connectivity from another M68322 suffix because the F package designation and T20 ordering code must be resolved against the exact manufacturer documentation.

Confirm every supply and ground connection, including required sequencing and decoupling, against the MC68322 datasheet before energizing a board. The verified product summary does not state operating voltage, current, or power dissipation, so those values must not be inferred from the 20 MHz clock rating. Record the original rail voltages and startup behavior, then compare them with the exact replacement configuration before insertion.

The main sourcing risk is treating the MC68322 family as a generic interchangeable group. Match the complete ordering code MC68322FT20, verify the 160-QFP package, and confirm clock, temperature grade, mask status, and lifecycle. For long-lived equipment, request traceable stock and inspect reel or tray labeling before accepting delivery; a visually similar leaded package is not an electrical substitute.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The product listings do not provide specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations. Do not infer these qualifications from the legacy processor's age or EC000 classification.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MC68322FT20 datasheet MC68322FT20 datasheet pdf MC68322FT20 pinout MC68322FT20 specifications MC68322FT20 price MC68322FT20 stock MC68322FT20 replacement MC68322FT20 equivalent MC68322FT20 cross reference MC68322FT20 160 QFP Motorola MC68322FT20 MC68322FT20 20 MHz processor

관련 부품 & 용어

Motorola MC68322FT20 MC68322 M683XX 16-bit microprocessor embedded processor microprocessor IC single-core processor 20 MHz clock 160-QFP package 28 mm by 28 mm package surface-mount package legacy industrial controller embedded instrumentation communications equipment motorcycle electronics factory automation EC000 clock source reset sequencing memory interface peripheral interface obsolete component cross reference
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기