onsemi

MC74F169M - 4-Stage Synchronous Counter | onsemi

부품 번호: MC74F169M ✗ 단종
16 pin Package Positive edge Speed
MOQ: 1 |

MC74F169M 개요

The onsemi MC74F169M is a 4-stage synchronous bidirectional counter designed for counting and sequencing applications that require a stable, multi-bit count output. It provides a 4-bit counting section with modulo-16 up-count and down-count operation, making it useful for digital control, timing, and address-generation systems. The MC74F169M is associated with the onsemi MC74F169 logic family and is supplied in a 16-pin small-outline package indicated by the M suffix.

A synchronous counter is a digital logic device whose internal flip-flops change state on the same active clock edge. Unlike an asynchronous ripple counter, a synchronous counter updates all counting stages together, reducing propagation-delay variation between output bits. The MC74F169M also supports synchronous loading and counting in either direction, providing flexible control for repeatable state transitions.

The principal functional characteristics include four counting stages, a 4-bit counter architecture, positive-edge counting, bidirectional operation, and a modulo-16 count sequence. These characteristics allow the output word to advance from 0 through 15 in the selected direction. The device is suitable for digital frequency division, event counting, programmable sequencing, industrial timing, and control-logic applications where a compact counter is preferable to a programmable logic implementation.

The synchronous architecture keeps the counter stages aligned during each count transition, which helps maintain predictable outputs in multi-bit buses. The MC74F169M can therefore be used as a compact state counter, a modulo-16 sequencing element, or a building block for larger counters when additional cascaded stages are required. Cascading requires attention to count enable, carry, reset, and clock-edge relationships so that the combined counter advances only when intended.

Typical implementations include industrial control and automation equipment, electronic timers, test and measurement systems, digital instrumentation, and general-purpose logic designs. In a timer, the counter can divide an input clock into a lower-frequency update rate. In a sequencing circuit, it can advance through up to 16 states. In an event-counting system, it can retain a modulo-16 tally while external logic handles overflow interpretation.

When laying out the design, use the manufacturer pin-description table for the exact MC74F169M package and verify the meanings of the parallel-load, count-enable, clear, clock, and output signals. Keep clock and control traces short, provide a low-impedance ground reference, and isolate sensitive analog circuitry from digital switching nodes. Because counter outputs change on clock edges, include adequate timing margin for downstream combinational logic and synchronize asynchronous control inputs when they originate outside the local clock domain.

This page organizes the MC74F169M function, package information, comparison dimensions, sourcing workflow, and engineering guidance into one practical reference. It also distinguishes confirmed product attributes from details that require review in the manufacturer datasheet, helping designers move from identification to schematic validation with fewer packaging or timing mistakes.

드롭인 대체품: MC74F169M — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

MC74F169M 최대 정격 & 전기적 특성

Counter Type 4-stage synchronous bidirectional counter
Counting Element 1 element
Counter Width 4 bit
Count Sequence Modulo 16
Counting Direction Bidirectional, up or down
Clock Edge Positive edge
Logic Family MC74F169
Manufacturer onsemi
Package Pin Count 16 pin
실장 유형 Surface mount
RoHS 상태 Compliant

MC74F169M 16 pin 핀 구성 가이드

MC74F169M(16 pin 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MC74F169M의 16 pin 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MC74F169M.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MC74F169M 적합 용도: 6 애플리케이션s: Digital Timer and Frequency Divider, Industrial Sequence Controller, Event and Batch Counter, Test and Measurement Instrument, Programmable Control Front End, General-Purpose Digital Logic.

⚡

Digital Timer and Frequency Divider

The MC74F169M is suitable for dividing a periodic input clock into a lower-rate counting sequence because it provides four synchronous counting stages and positive-edge operation. With an appropriate terminal count and reset arrangement, the device can generate repeatable modulo-16 timing intervals for clocked digital circuits. The synchronous architecture updates all four outputs on the same active edge, which helps downstream circuitry interpret the count as one coherent binary word. The input clock must remain within the manufacturer timing limits for the selected supply voltage, and the final output should include suitable reset synchronization to establish a deterministic starting state.

🏭

Industrial Sequence Controller

The MC74F169M can act as a compact 16-state sequencing element in industrial automation and control systems. Its four-bit bidirectional counter advances through up to 16 states, allowing control outputs to be decoded into repeatable machine steps, timing phases, or operating modes. Synchronous stage updates help the decoded state change on a defined clock edge rather than through a ripple of unequal propagation delays. Designers should decode only the required state outputs, keep combinational logic timing within budget, and use the manufacturer-defined clear and load controls to return the sequence safely to its initial condition.

🏭

Event and Batch Counter

The MC74F169M fits event-counting and batch-control designs that need to retain a four-bit modulo-16 tally. Each qualified clock event advances the count, while the application logic interprets the terminal state as a completed batch and resets or reloads the counter. Positive-edge operation makes the sampling point explicit and supports deterministic association between the event and the updated count. In noisy industrial environments, qualify the event source, protect unused inputs, and ensure that reset and load signals meet the timing requirements stated in the manufacturer datasheet.

📺

Test and Measurement Instrument

The MC74F169M can organize repetitive measurement or stimulus steps in test and measurement equipment by cycling through a defined sequence of up to 16 states. The counter outputs can feed address or control decoding, while the external clock determines how quickly the instrument advances. Its synchronous operation produces a more coherent state transition than a ripple counter and supports repeatable multi-step procedures. The implementation should use a stable timebase, register any asynchronous commands before the counter clock edge, and protect the output bus from loading that could disturb timing or logic levels.

🧩

Programmable Control Front End

The MC74F169M is useful as a small front-end counter for programmable controllers that need event accumulation, phase counting, or modulo-based command pacing. It allows a controller to determine when a programmed number of steps or pulses has occurred while keeping the primary state machine compact. Because the device offers bidirectional counting, the same hardware can support progress counting, retrigger behavior, and reverse-index sequences. Firmware should use edge-defined events, include a timeout for missed or extra clocks, and read the counter only when the design guarantees a stable sampling instant.

🔧

General-Purpose Digital Logic

The MC74F169M provides a compact hardware solution for general-purpose digital logic requiring a repeatable 16-state counter without a programmable logic device. It can serve as a programmable divider, phase generator, state register, or building block in a larger counting system. The four-stage synchronous design supports predictable word updates, while the parallel control functions broaden its usefulness in legacy logic designs. Confirm the exact pin function and electrical behavior in the onsemi datasheet before final schematic capture, especially when unused inputs must be tied to defined logic levels.

추천 제품 요약

MC74F169N onsemi 사용처: Digital Timer and Frequency Divider, Industrial Sequence Controller, Event and Batch Counter, Test and Measurement Instrument, Programmable Control Front End, General-Purpose Digital Logic 74F169 Functionally related 4-stage synchronous counter 사용처: Digital Timer and Frequency Divider, Industrial Sequence Controller, Event and Batch Counter, Test and Measurement Instrument, Programmable Control Front End, General-Purpose Digital Logic
What is the onsemi MC74F169M?
The onsemi MC74F169M is a 4-stage, 4-bit synchronous bidirectional counter with positive-edge counting and modulo-16 operation. According to the onsemi manufacturer datasheet, it is a logic counter intended for counting, sequencing, timing, and digital control applications. Its synchronous organization means the four counting stages update on the same clock edge, helping avoid the cumulative propagation delay found in asynchronous ripple counters.
What functions does the MC74F169M provide?
The MC74F169M provides synchronous up-counting and down-counting across four counter stages. The manufacturer identifies it as a 4-bit, modulo-16 counter with a positive-edge clock and bidirectional operation. The device can be used as a compact state counter, a programmable sequence generator, a frequency-divider stage, or a building block in cascaded counting systems where the count enable and terminal-count signals must be coordinated correctly.
Where can I download the MC74F169M datasheet PDF?
The MC74F169M datasheet can be reached through the linked manufacturer-data reference on this page or through the MC74F169 document listing. The document provides the authoritative package drawing, pin-description table, logic diagram, electrical characteristics, and timing information. Before layout or schematic release, compare the exact M suffix package and pin assignments against the current onsemi datasheet rather than relying on a generic 74F169 diagram.
Where can I find the MC74F169M pinout?
The MC74F169M pinout is documented in the pin-description table of the onsemi datasheet. The device uses a 16-pin logic-counter package and includes clock, count-direction, load, clear, carry, and four counter-output functions. Use the manufacturer drawing to map the package pins because related 74F169 devices can appear in different package styles, and package-specific ordering suffixes determine the physical lead arrangement.
Can the MC74F169M count both up and down?
Yes, the MC74F169M supports bidirectional counting. The onsemi manufacturer datasheet identifies it as a synchronous up/down counter with four stages and a 4-bit modulo-16 count range. The count direction is selected by control logic, allowing the same counter to support ascending sequences, descending sequences, repeatable modulo operations, and programmable timing or sequencing behavior.
What is the difference between synchronous and ripple counting?
A synchronous counter updates all counter stages on the same clock edge, whereas a ripple counter uses the output of one stage to clock the next stage. The onsemi MC74F169M uses synchronous operation, so its four count outputs change together on the active clock edge. This arrangement reduces stage-to-stage delay accumulation and makes the output word more suitable for synchronous control, timing, and bus-oriented designs.
Is the MC74F169M suitable for digital timers and frequency dividers?
The MC74F169M is suitable for digital timers and frequency dividers because its four-stage modulo-16 architecture can divide an input clock into a lower-rate state sequence. Its positive-edge operation supports deterministic sampling and counting, while bidirectional control permits additional timing and phase-offset schemes. The maximum usable input frequency must remain within the electrical limits published in the onsemi datasheet for the selected supply voltage and package.
Can the MC74F169M be used in industrial control and automation equipment?
Yes, the MC74F169M can be used in industrial control and automation equipment as a compact binary or modulo-16 sequencing element. Its four synchronous stages suit repeatable state-machine progression, event counting, and timing subdivisions. For production designs, confirm operating-temperature, supply-voltage, and lifecycle requirements, and verify reset, load, and count-enable behavior against the manufacturer timing diagrams.
What is the best drop-in replacement for MC74F169M?
The best drop-in replacement is the onsemi or qualified-source device with the same 16-pin package, identical pin assignments, equivalent synchronous counting behavior, and compatible electrical limits. The MC74F169N is functionally related but uses a through-hole 16-pin package, so it is not a board-level drop-in replacement for the M suffix. Use the onsemi cross-reference tool and manufacturer pin tables to qualify any proposed substitute before PCB reuse.
Can the MC74F169N replace the MC74F169M on the same PCB?
No, the MC74F169N is not a drop-in replacement for the MC74F169M because the N device is listed in a 16-pin through-hole package while the M device uses the surface-mount ordering suffix. Although both belong to the MC74F169 family and provide the counter function, their physical footprints differ. A PCB designed for MC74F169M requires lead-pattern conversion or a different board revision.
MC74F169M vs 74F169: which counter should I choose?
Choose the MC74F169M when your design requires the onsemi MC74F169 family device in the M suffix surface-mount package. Choose a 74F169 only after confirming its manufacturer, package, pinout, electrical ratings, and lifecycle status. Both devices are described as four-stage synchronous bidirectional counters, but family naming alone does not guarantee package compatibility, timing equivalence, or sourcing availability.
When should I choose MC74F169M over a programmable logic implementation?
Choose the MC74F169M when the design requires a simple 4-bit bidirectional modulo-16 counter and does not need programmable arithmetic or extensive state control. It can reduce schematic size, firmware complexity, and external routing compared with a programmable logic device. Select a programmable logic implementation instead when nonbinary counting, multiword arithmetic, configurable widths, or advanced clocking features are required.
How do I cascade MC74F169M counters for more counting range?
Cascade MC74F169M stages by connecting the terminal-count indication of the lower-order counter to the count-enable control of the next counter while sharing the active clock. The lower-order stage should be configured to reload or hold at its terminal value when the higher-order stage increments. Verify the exact terminal-count, count-enable, clear, and load polarity in the manufacturer logic diagram before finalizing the interstage wiring.
What is the MC74F169M price?
The current commercial price for the MC74F169M is determined by condition, quantity, and supply status and can change without notice. Use the Request a Quote form on this page for the current unit-price review and available quantity. The form also allows procurement to request lifecycle confirmation, delivery timing, and suitable packaging for an obsolete or legacy production build.
Is MC74F169M in stock and what is its lead time?
Stock and lead time for the MC74F169M depend on current legacy inventory and the requested quantity. Use the Request a Quote form on this page to confirm available supply, scheduled delivery, and minimum order quantity. For production continuity, request a lifecycle review and ask whether any unreleased or excess inventory can be allocated to the required build schedule.
Where can I buy MC74F169M online?
Use the Request a Quote form on this page to request MC74F169M pricing, stock confirmation, and delivery information for the exact M suffix. Quote requests are preferable for an obsolete counter because available inventory can be limited, lot traceability can matter, and production schedules may require committed allocation. Confirm the package marking and counterfeit-avoidance documentation before accepting any shipment.

엔지니어링 참조 데이터: MC74F169M — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MC74F169M for a new surface-mount design that needs a compact 4-bit, modulo-16 synchronous up/down counter and can use the onsemi MC74F169 pin and timing definitions. Choose the MC74F169N only for a through-hole PCB or repair requiring that exact package; it is not a drop-in substitute for the M suffix. Consider the 74F169 family when another manufacturer's qualified device provides the required package, pinout, electrical ratings, and lifecycle commitment, but do not assume that the family name alone establishes compatibility. For applications requiring nonbinary count sequences, programmable widths, or complex arithmetic, choose programmable logic instead. For any legacy production design, request a supply review and verify the device marking, package, traceable inventory, and electrical characteristics before committing the part to a new assembly release.

대체품과의 비교

파라미터 이 제품
Brand onsemi
Package 16-pin surface-mount package indicated by the M suffix
Counter Type 4-stage synchronous bidirectional counter
Counter Width 4 bit
Count Sequence Modulo 16
Counting Direction Up or down
Clock Edge Positive edge
Counting Element 1 element
RoHS Status Compliant

주요 차별점

  • Compact bidirectional counting in one logic package (vs 74F169)
  • Surface-mount ordering option (vs MC74F169N)
  • Synchronous four-stage architecture (vs MC74F169N)

설계 노트

Do not treat the MC74F169M and MC74F169N as interchangeable footprints. The N suffix identifies a 16-pin through-hole package, while the M suffix identifies the surface-mount ordering option. A schematic-level equivalence does not permit direct PCB substitution. Confirm the package drawing, lead pitch, row arrangement, and pin numbering against the onsemi datasheet before approving a replacement or releasing artwork.

Route the clock and clear signals as short, direct PCB traces, and keep the counter return path close to the device ground connection. Outputs that fan out to decoders or control logic should be routed away from sensitive analog nodes. When switching between count, load, and clear modes, verify that the transition timing satisfies the manufacturer setup and hold requirements so the counter always enters a defined state.

Treat every active count edge as a coordinated output transition because all four synchronous stages can update together. Check downstream decoder and bus timing at the maximum intended clock rate, and avoid adding long unprotected traces between counter outputs and high-fanout loads. If control signals originate in another clock domain, synchronize them before driving load, clear, or count-enable inputs to prevent metastability and unintended intermediate states.

규정 준수 정보

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The MC74F169M product listing identifies the part as RoHS compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement is established by the cited sources.

데이터 검증일: 2026-11-16 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MC74F169M datasheet MC74F169M pinout MC74F169M datasheet pdf MC74F169M specifications onsemi MC74F169M MC74F169M 4-bit counter MC74F169M 16 pin package MC74F169M equivalent MC74F169M replacement MC74F169M vs 74F169 MC74F169M price MC74F169M stock

관련 부품 & 용어

onsemi MC74F169M MC74F169N 74F169 MC74F169 synchronous counter bidirectional counter 4-bit counter modulo-16 counter logic counter digital logic IC integrated circuit semiconductor positive-edge clock count enable parallel load terminal count carry output RoHS 16-pin surface-mount package digital timer frequency divider industrial sequencing event counting
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기