MC908MR32VBE - 8-Bit 8MHz 32KB MCU | NXP | 56-SDIP
부품 번호: MC908MR32VBE ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $10.459 | $10.46 |
| 10 | $10.459 | $104.59 |
| 100 | $10.459 | $1,045.90 |
| 500 | $10.459 | $5,229.50 |
| 1,000 | $10.459 | $10,459.00 |
MC908MR32VBE 개요
What is an 8-bit CISC microcontroller? An 8-bit CISC MCU is a compact embedded controller that executes instructions over an 8-bit data path, integrating processor core, program memory, data memory, peripherals, and interrupt-control functions on one semiconductor device. MC908MR32VBE belongs to the HC08 microcontroller family and is used where deterministic control, serial communication, and cost-effective through-hole assembly are more important than high processing bandwidth.
Verified specifications include an HC08 core, 8-bit data-bus width, 8 MHz maximum clock frequency, 32 KB flash memory, 5 V supply, and a 56-pin SPDIP package. The flash-memory organization is listed as 32K x 8. The part is suitable for legacy peripheral controllers, communication interfaces, small automation controllers, and industrial equipment where the HC08 toolchain and existing board layout are already established.
The HC08 architecture provides a practical platform for embedded control because firmware can combine basic digital I/O, timers, serial communication, and application-specific logic in one device. Because the verified data does not specify RAM size, timer counts, I/O levels, electrical limits, or detailed peripheral assignments, those parameters remain marked as data needed rather than inferred. Engineers should consult the manufacturer documentation before finalizing memory, timing, or peripheral assignments.
Typical implementation uses the 56-pin SPDIP package for through-hole PCB assembly, programming access, and serviceability. The package is more mechanically accessible than a fine-pitch surface-mount option, but its larger footprint requires additional board area. The 8 MHz clock and 8-bit architecture are appropriate for control loops that do not require high-speed graphics, networking throughput, or complex real-time processing.
A key design consideration is preserving the exact HC08 device variant, clock configuration, reset behavior, and peripheral mapping when replacing an existing MC908MR32VBE. Do not treat a similarly named HC08 device with a different package or memory organization as a drop-in replacement. This page combines verified distributor information with application context and explicitly identifies parameters that still require manufacturer confirmation.
드롭인 대체품: MC908MR32VBE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC908MR32VBE (동일 폼 팩터 및 풋프린트) — 차이점: Core.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC908MR32VBE 최대 정격 & 전기적 특성
| Product Type | 8-bit CISC microcontroller |
| Core | HC08 |
| Processor Series | HC08MR |
| 데이터 버스 폭 | 8 bit |
| 최대 클록 주파수 | 8 MHz |
| Flash Memory | 32 KB (32K x 8) |
| 공급 전압 | 5 V |
| 패키지 | 56-pin SPDIP |
| Package Type | Through-hole SPDIP |
| Manufacturer | NXP Semiconductors |
| Legacy Manufacturer | Freescale Semiconductor |
| Connectivity | SCI, SPI |
| Architecture | CISC |
| Memory Organization | 32K x 8 flash |
MC908MR32VBE through-hole spdip 핀 구성 가이드
MC908MR32VBE(through-hole spdip 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC908MR32VBE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC908MR32VBE 적합 용도: 6 애플리케이션s: Legacy Industrial Control, Serial Communication Interface, Small Automation Controller, Instrumentation and Measurement Module, Legacy Communication Adapter, Serviceable Through-Hole Embedded Board.
Legacy Industrial Control
The MC908MR32VBE fits legacy industrial-control boards that already use the HC08 architecture and require a serviceable through-hole controller. Its verified 8 MHz clock and 8-bit CISC core are suited to sequential logic, supervisory control, and basic closed-loop tasks rather than high-throughput processing. The 32 KB flash memory provides room for application firmware, while SCI and SPI connectivity can support external modules. The 56-pin SPDIP format simplifies inspection and replacement in legacy equipment, although the exact I/O, timer, and interrupt assignments must be confirmed from the manufacturer pinout.
추천
Serial Communication Interface
Use MC908MR32VBE where an HC08-based system needs a compact serial-control node with SCI or SPI connectivity. The verified 8 MHz maximum clock provides timing margin for byte-oriented communication and low-bandwidth peripheral protocols, while the 32 KB flash footprint supports firmware for framing, command parsing, and device monitoring. The exact baud-rate range, SPI mode, and peripheral pin mappings are not supplied and must be obtained from the manufacturer documentation. In a new design, a newer MCU may offer more integrated connectivity and smaller packaging.
추천
Small Automation Controller
MC908MR32VBE can serve as the central controller in a compact automation module when the board already uses HC08 firmware and a 56-pin SPDIP footprint. Its verified 8-bit CISC architecture is appropriate for state machines, actuator sequencing, input debouncing, and supervisory logic. The 32 KB flash allocation is meaningful for small embedded programs, but RAM and detailed timer resources remain unspecified. Engineers should confirm interrupt latency, I/O levels, watchdog behavior, and electrical limits before assigning safety- or production-critical functions.
추천
Instrumentation and Measurement Module
The MC908MR32VBE is potentially suitable for legacy measurement equipment that already depends on its HC08 peripherals and through-hole package. Its 8 MHz clock can support control and communication tasks around slower sensors, displays, or measurement interfaces, while 32 KB flash provides room for calibration and control code. The verified data does not specify ADC functions, timer resolution, RAM, or analog peripherals, so this application requires datasheet-level confirmation. A replacement should be selected only after checking signal conditioning, grounding, timing, and connector assignments.
추천
Legacy Communication Adapter
MC908MR32VBE can be used in an older communication adapter when protocol handling and HC08 software support justify maintaining the MCU. Verified SCI and SPI connectivity provides the basis for connecting a local sensor, transceiver, or peripheral bus, while the 8 MHz clock handles moderate protocol timing. The package's through-hole format supports repairable industrial boards and prototype fixtures. Because maximum I/O, serial timing, and electrical characteristics are not provided in the retrieved data, validate them from the official datasheet and preserve the existing firmware unless the replacement is proven equivalent.
추천
Serviceable Through-Hole Embedded Board
The 56-pin SPDIP package makes MC908MR32VBE useful for prototypes, repair assemblies, and legacy boards where through-hole serviceability is preferred. A technician can inspect or replace the device without fine-pitch rework, and the 8-bit HC08 platform supports established embedded codebases. The verified 32 KB flash and 8 MHz clock are sufficient for many control-oriented applications, but the larger package consumes board area compared with modern surface-mount MCUs. Before assembly, confirm pin numbering, orientation, supply rails, oscillator connections, and programming access from the manufacturer documentation.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC908MR32VBE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 56-pin SPDIP |
| Brand | NXP Semiconductors |
| Core | HC08 |
| Data Bus Width | 8 bit |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Supply Voltage | 5 V |
| Connectivity | SCI, SPI |
| Price Reference | 10.4590 USD as of 2026-10-21 |
| Drop-In Compatibility | No verified replacement in supplied data |
주요 차별점
- Verified HC08MR identity (vs MC908AP8CBE)
- Through-hole legacy integration (vs Newer surface-mount 8-bit MCUs)
- Established serial connectivity profile (vs MC908AP32ACFBE)
설계 노트
Preserve the existing 56-pin SPDIP footprint, pin numbering, and board keep-outs before treating any MC908 or HC08-family device as a substitute. Verify every power, ground, oscillator, reset, programming, serial, and peripheral connection against the official pinout. A matching package name alone does not establish pin-to-pin compatibility.
The verified device is identified as a 5 V MCU, but the supplied data does not state input-voltage tolerance, supply current, or I/O drive capability. Check the original schematic and manufacturer electrical characteristics before adding peripherals or selecting pull-ups. Do not infer 3.3 V compatibility from the HC08 family name.
Do not substitute MC908AP32ACFBE, MC908AP8CBE, or another similarly named HC08 device based only on shared 8-bit, 8 MHz characteristics. Confirm flash size, RAM, package, pin assignments, reset behavior, peripherals, clock requirements, and programming procedure. The supplied comparison pages establish family similarity, not drop-in equivalence.
규정 준수 정보
The supplied distributor results do not provide definitive compliance declarations for the exact MC908MR32VBE device. Verify current manufacturer or distributor documentation before procurement.
