MC912DG128ACPVR2 - 16-Bit 8MHz 128KB Flash MCU | NXP
부품 번호: MC912DG128ACPVR2 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
MC912DG128ACPVR2 개요
A microcontroller is a programmable embedded-control IC that combines a processor core, memory, peripherals, and I/O in one device. The MC912 family belongs to the 16-bit embedded-controller hierarchy, where software executes from on-chip flash while the integrated peripherals connect the processor to sensors, actuators, communication links, and safety-oriented control systems. Compared with an 8-bit MCU, a 16-bit architecture provides a wider processing and addressing model for automotive body, powertrain-adjacent, and industrial embedded-control tasks, subject to the exact peripheral and memory configuration in the manufacturer datasheet.
The supplied specifications identify 128 KB flash, an 8 MHz operating speed, 16-bit instruction and data processing, 5 V nominal operation, 85 I/O lines, and 112 LQFP terminals. These features make the MC912DG128ACPVR2 suitable for applications needing deterministic embedded control, substantial on-chip program storage, and a moderate pin count. The LQFP-112 package provides exposed perimeter leads for PCB assembly, while the gull-wing terminal form supports conventional inspection and rework processes.
The part is reported as an automotive AEC-Q100 MCU, making it relevant to vehicle electronic control units and other embedded automotive systems. Its -40 °C to +85 °C industrial temperature designation is also useful for equipment operating across extended temperature ranges. Exact clock, memory, electrical, peripheral, and qualification details should be confirmed against the manufacturer technical data before a new design is released.
Typical design use includes automotive body-control modules, sensor-conditioning controllers, actuator interfaces, communication hubs, industrial automation controllers, and embedded instrumentation. The 85 I/O lines can reduce the need for external interface logic when the system must connect multiple discrete signals. The 128 KB flash capacity provides room for application code and fixed control routines without relying on external program memory, although real firmware sizing must be measured rather than assumed.
For PCB implementation, preserve the LQFP-112 land pattern, pin-1 orientation, exposed thermal and power requirements, and the manufacturer-specified decoupling and external-component layout. Do not substitute a similarly named MC912 variant without checking memory size, temperature grade, pinout, timing, qualification, and lifecycle status.
This page consolidates verified distributor specifications, sourcing links, and design-oriented cautions for MC912DG128ACPVR2. It intentionally distinguishes reported facts from parameters requiring confirmation in the official datasheet.
드롭인 대체품: MC912DG128ACPVR2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MC912DG128ACPVR2 최대 정격 & 전기적 특성
| Architecture | 16-bit CISC |
| Flash Memory | 128 KB |
| 최대 클록 주파수 | 16 MHz |
| Nominal Operating Voltage | 5 V |
| I/O Lines | 85 |
| 동작 온도 | -40 °C to +85 °C |
| Temperature Grade | Industrial |
| 패키지 | 112-pin LQFP |
| Terminal Count | 112 |
| Terminal Form | Gull wing |
| Package Shape | Square |
| 실장 유형 | Surface mount |
| Technology | HCMOS |
| Automotive Qualification | AEC-Q100 |
| Manufacturer Category | Microcontrollers |
| Core/Product Family | MC912 16-bit embedded microcontroller family |
| Processor Bit Width | 16 bit |
| Supply Packaging | Tape and reel |
MC912DG128ACPVR2 square 핀 구성 가이드
MC912DG128ACPVR2(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC912DG128ACPVR2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC912DG128ACPVR2 적합 용도: 6 애플리케이션s: Automotive Body-Control Module, Industrial Sensor Conditioning, Actuator and Relay Interface, Communication Hub, Embedded Test and Measurement Instrument, Industrial Automation Controller.
Automotive Body-Control Module
MC912DG128ACPVR2 fits a body-control module when the design needs local 16-bit control logic, 128 KB of flash, and 85 I/O lines for switches, lamps, locks, sensors, and actuators. Its reported AEC-Q100 status makes it relevant to vehicle electronics, while the -40 °C to +85 °C range supports extended ambient conditions. The controller would typically gather digital inputs, apply debounce and diagnostics, and drive discrete outputs. Confirm exact automotive qualification, transient protection requirements, communication peripherals, and watchdog behavior in the official documentation.
추천
Industrial Sensor Conditioning
The 85 I/O lines and 16-bit CISC architecture make MC912DG128ACPVR2 suitable for industrial sensor-conditioning and acquisition control where multiple discrete sensors and limit switches must be coordinated. Its 128 KB flash can hold application routines and calibration logic, while the 112-pin LQFP provides access to numerous external signals. The controller can supervise sensors, perform threshold logic, and coordinate downstream actuators. The exact analog interfaces, ADC resources, timers, and communication blocks are not specified in the supplied data and must be verified before design commitment.
추천
Actuator and Relay Interface
MC912DG128ACPVR2 can serve as the supervisory controller in an actuator or relay interface because its reported 85 I/O lines provide substantial discrete connectivity. The MCU can accept position or limit-switch inputs, determine state transitions, and sequence outputs for motors, valves, heaters, or relays. A 16-bit processor is useful when the application benefits from wider arithmetic than an 8-bit controller. The final design must verify output-driver ratings, isolation, flyback paths, grounding, and timing because those electrical details are absent from the supplied search data.
추천
Communication Hub
MC912DG128ACPVR2 may be used in a small communication hub when a design requires deterministic embedded supervision alongside multiple I/O lines and local flash-resident firmware. The controller can manage node status, route commands, monitor link activity, and implement fail-safe behavior. Its 5 V nominal operating point is consistent with many embedded industrial interfaces, but no specific CAN, serial, or Ethernet capability is confirmed in the supplied material. The exact communications peripherals, protocol support, pin multiplexing, and timing requirements must be obtained from the manufacturer datasheet before selecting it.
추천
Embedded Test and Measurement Instrument
MC912DG128ACPVR2 can support an embedded test instrument or measurement controller where sequencing, digital limits, status reporting, and local firmware storage are required. The 16-bit CISC architecture provides a suitable control model for coordinating front-panel inputs, relay selections, measurement triggers, and data records. Its 128 KB flash allows firmware and fixed tables to remain resident, although the supplied data does not confirm RAM size or analog measurement resources. Confirm memory map, timing, I/O electrical limits, and instrument-specific isolation before using the MCU in a precision measurement path.
추천
Industrial Automation Controller
MC912DG128ACPVR2 is a plausible fit for an industrial automation controller that must coordinate distributed discrete I/O and execute deterministic control routines from local flash. The reported 16-bit architecture, 85 I/O lines, and -40 °C to +85 °C industrial temperature range are useful for machine-control and equipment-control platforms. It can supervise interlocks, operate relays, count events, and coordinate maintenance modes. Validate supply tolerances, watchdog requirements, peripheral availability, ESD protection, and long-term lifecycle support because those items are not supplied by the web snippets.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC912DG128ACPVR2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | NXP Semiconductors |
| Package | 112-pin LQFP |
| Architecture | 16-bit CISC |
| Flash Memory | 128 KB |
| Operating Speed | 8 MHz reported |
| Maximum Clock Frequency | 16 MHz reported by one listing |
| Nominal Voltage | 5 V |
| I/O Lines | 85 |
| Operating Temperature | -40 °C to +85 °C |
| Automotive Qualification | AEC-Q100 reported |
주요 차별점
- Reported automotive qualification (vs MC912DG128AVPVR2)
- 128 KB integrated flash (vs MC912DG128AVPVR2)
- 112-pin LQFP integration (vs MC912DG128AVPVR2)
설계 노트
Use the manufacturer LQFP-112 land pattern and preserve the documented pin-1 orientation rather than creating a footprint from the package description alone. The supplied sources confirm a square 112-pin LQFP with gull-wing leads, but they do not provide verified pin names or dimensions. Check the package drawing, pad dimensions, solder-mask clearance, and paste volume before releasing the PCB. For a new design, also verify exposed-pad or thermal-copper requirements from the official package data.
The 5 V nominal operating voltage should be treated as a system requirement, not a complete power specification. Confirm the device's minimum and maximum supply limits, input-voltage tolerance, oscillator supply requirements, and absolute maximum ratings in the manufacturer datasheet. Place required bypass capacitors at the power pins according to the reference layout, maintain a low-impedance ground return, and isolate noisy actuator drives from sensitive MCU supply paths.
Do not select MC912DG128AVPVR2 as a substitute solely because its related listing also shows a 112-terminal LQFP package. The supplied evidence does not prove identical pinout, memory organization, clock limits, qualification, temperature behavior, or software compatibility. Review the exact ordering-code suffix, manufacturer pin description, electrical tables, qualification documents, and lifecycle notices before approving any replacement. Software migration also requires checking peripheral addresses, interrupt vectors, and memory-map compatibility.
Plan the 85 I/O lines around the actual system requirements rather than routing all available pins indiscriminately. Separate clock and sensitive signal paths from relay, motor, and switching-supply return currents. Use continuous ground references where appropriate, minimize loop area around high-current drivers, and follow the manufacturer's recommended decoupling and external-component placement. The supplied snippets do not provide a reference design, so exact capacitor values and placement must be taken from official documentation or validated by engineering review.
규정 준수 정보
The supplied distributor data identifies the part as automotive AEC-Q100, but it does not provide verified RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. Compliance status must be confirmed from current manufacturer or authorized-distributor documentation.