MC9RS08KB8CTG - 8-bit RS08 MCU, 8KB Flash, 20MHz | NXP
부품 번호: MC9RS08KB8CTG ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.66 | $1.66 |
| 10 | $1.49 | $14.90 |
| 100 | $1.27 | $127.00 |
| 500 | $1.05 | $525.00 |
| 1,000 | $0.93 | $930.00 |
MC9RS08KB8CTG 개요
An 8-bit microcontroller (MCU) is a single-chip computer built around an 8-bit data path, integrating a CPU, non-volatile program memory (Flash), volatile data memory (RAM), and peripherals such as timers, ADCs, and communication interfaces. The MCU sits below microprocessors and above discrete logic in the embedded hierarchy, and the RS08KB family is a flash-based, low-pin variant within the broader Freescale/NXP 8-bit and 32-bit automotive and industrial MCU portfolio.
Key features of the MC9RS08KB8CTG include an 8 KB Flash program memory, a 20 MHz RS08 core with BGND debug instruction, a single global interrupt vector, and operation across 2.7 V to 5.5 V supply range. The device integrates an analog-to-digital converter, timer modules, and serial communication blocks, supporting reduced system cost through peripheral integration. The TSSOP-16 footprint offers compact board placement suitable for space-constrained designs.
The RS08 core is a reduced-instruction-set variant of the HC08 family, retaining code efficiency and toolchain familiarity while trimming die size. On-chip hardware breakpoints and the BGND instruction simplify in-circuit debug via standard RS08 background debug tools, lowering the engineering effort required for firmware bring-up versus pure software emulation.
Typical applications include small home appliances, sensor interface modules, LED lighting controllers, low-end motor control signal boards, and industrial sensor hubs. The wide operating voltage and industrial temperature range suit automotive body and chassis subsystems as well as factory-automation peripherals.
When designing with this MCU, ensure decoupling capacitors are placed close to the VDD pins and that unused pins follow the datasheet recommendations to avoid spurious interrupts. Migrating from larger RS08KB family members preserves pin compatibility when staying within the same package.
드롭인 대체품: MC9RS08KB8CTG — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9RS08KB8CTG (동일 폼 팩터 및 풋프린트) — 차이점: Package, RAM Size, Program Memory Size, Core, Core Processor.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9RS08KB4CWJ
✅ 드롭인✓ 재고 있음
$1.49 / 개
데이터시트 보기 →MC9RS08KA1CDBR
✅ 드롭인✓ 재고 있음
$0.5279 / 개
데이터시트 보기 →MC9S08QE8CTG
✅ 드롭인✓ 재고 있음
$6.3214 / 개
데이터시트 보기 →MC9S08SH8MTG
✅ 드롭인✓ 재고 있음
$1.55 / 개
데이터시트 보기 →MC9S08PA8VLC
✅ 드롭인✓ 재고 있음
$1.84 / 개
데이터시트 보기 →MC9RS08KB8CTG 최대 정격 & 전기적 특성
| Core | RS08 (subset of HC08 with BGND) |
| 데이터 버스 폭 | 8 bit |
| Program Memory Size | 8 KB (8K x 8) Flash |
| Maximum CPU Frequency | 20 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| 동작 온도 범위 | -40C to +85C |
| 패키지 | 16-TSSOP (0.173", 4.40 mm width) |
| 실장 유형 | Surface Mount |
| Interrupt Structure | Single global interrupt vector |
| Debug Interface | RS08 background debug (BGND instruction) |
| Peripherals | ADC, Timers, Communication interfaces (per datasheet) |
| RoHS 상태 | Compliant (per distributor listings) |
MC9RS08KB8CTG 핀 구성
| 핀 1 | PTA0/KBIP0/TCLK0/ACMP+ — General I/O / keyboard interrupt / timer clock / analog comparator input |
| 핀 2 | PTA1/KBIP1/TCLK1/ACMP- — General I/O / keyboard interrupt / timer clock / analog comparator input |
| 핀 3 | PTA2/KBIP2 — General I/O / keyboard interrupt |
| 핀 4 | PTA3/KBIP3/RESET_b — General I/O / keyboard interrupt / reset (bidirectional) |
| 핀 5 | VDD — Power supply (2.7 V to 5.5 V) |
| 핀 6 | VSS — Ground |
| 핀 7 | PTB0/SCL — General I/O / I2C clock |
| 핀 8 | PTB1/SDA — General I/O / I2C data |
| 핀 9 | PTB2/RxD — General I/O / UART receive |
| 핀 10 | PTB3/TxD — General I/O / UART transmit |
| 핀 11 | PTC0/ADP0 — General I/O / ADC channel |
| 핀 12 | PTC1/ADP1 — General I/O / ADC channel |
| 핀 13 | PTC2/ADP2 — General I/O / ADC channel |
| 핀 14 | PTC3/ADP3 — General I/O / ADC channel |
| 핀 15 | BKGD/MS — Background debug / mode select |
| 핀 16 | PTA4/KBIP4 — General I/O / keyboard interrupt |
일반적인 애플리케이션
MC9RS08KB8CTG 적합 용도: 6 애플리케이션s: Home Appliance Control, Sensor Interface Module, LED Lighting Controller, Low-end Motor Control Signal Board, Automotive Body Electronics Subsystem, Industrial Sensor Hub.
Home Appliance Control
The MC9RS08KB8CTG fits small home appliances such as coffee machines, microwave ovens, blenders, and small kitchen controllers where the firmware footprint stays under 8 KB Flash. Its 2.7 V to 5.5 V supply range and -40C to +85C industrial temperature make it tolerant of rectified mains-derived rails and warm internal environments. The 16-pin TSSOP provides adequate I/O for keypad scanning, LED indicator drive, and a UART link to control boards. Its RS08 core preserves HC08 code familiarity, allowing existing appliance firmware libraries to be re-used with minimal rewrite.
추천
Sensor Interface Module
Industrial sensor-interface modules reading temperature, humidity, or proximity often need a small, deterministic 8-bit MCU to handle ADC sampling and simple protocol conversion. The MC9RS08KB8CTG's on-chip ADC and timers deliver deterministic sampling at the 20 MHz RS08 core, while the 8 KB Flash is sufficient for periodic calibration and protocol handling. The single global interrupt vector keeps the interrupt service routine overhead low, suitable for tight sensor-loop timing. The TSSOP-16 footprint mounts cleanly on compact daughter boards inside sensor housings.
추천
LED Lighting Controller
In LED lighting controllers for architectural and residential dimming systems, the MC9RS08KB8CTG's 20 MHz core can drive PWM dimming channels while the on-chip ADC reads ambient light sensors and potentiometers. The 2.7 V to 5.5 V supply range supports direct connection to 5 V regulator outputs commonly used in LED driver stages. With 8 KB Flash the MCU fits full-color-mixing firmware plus simple DMX or 0-10 V protocol stacks. The TSSOP-16 package allows integration inside compact driver enclosures.
추천
Low-end Motor Control Signal Board
The MC9RS08KB8CTG can act as a signal-board MCU on low-end motor-control assemblies such as small DC fans, pumps, or stepper-driven valves where a dedicated gate driver handles power conversion. The 20 MHz RS08 core computes commutation timing, while the 16-pin TSSOP exposes PWM-capable timers and a UART link to a host controller. The wide 2.7 V to 5.5 V supply and -40C to +85C range suit industrial cabinet environments. The compact Flash size intentionally forces firmware simplicity, which is appropriate for safety-critical signal logic.
추천
Automotive Body Electronics Subsystem
In automotive body-electronics subsystems (mirror controllers, lighting modules, seat-position switches) the MC9RS08KB8CTG operates from a 5 V regulated battery rail, with industrial temperature tolerance covering cabin and under-hood-adjacent locations. The 16-pin TSSOP is small enough to fit behind mirror glass or inside a switch cluster. The RS08 core's HC08 instruction compatibility eases migration of legacy automotive firmware. For AEC-Q100-qualified variants, engineers should verify the specific NXP order code in the automotive portfolio.
추천
Industrial Sensor Hub
Industrial sensor hubs that aggregate several analog or digital sensors on a single PCB benefit from the MC9RS08KB8CTG's on-chip timers, ADC, and serial interfaces. The MCU can read field sensors, run simple linearization, and forward processed data via UART/SPI to a higher-tier controller. The TSSOP-16 footprint is suitable for DIN-rail daughter boards, and the 2.7-5.5 V supply matches 24 V-bus-derived 5 V rails. The 8 KB Flash budget accommodates typical Modbus RTU or vendor-proprietary protocol stacks.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9RS08KB8CTG — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9RS08KB4CWJ | MC9RS08KA1CDBR | MC9S08QE8CTG | MC9S08SH8MTG | MC9S08PA8VLC |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 16-TSSOP | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same | 16-TSSOP - same |
| Core | RS08 (20 MHz) | RS08 (20 MHz) | RS08 (20 MHz) | S08 (up to 50 MHz) | S08 (up to 40 MHz) | S08 PA (20 MHz) |
| Flash Size | 8 KB | 4 KB (-50%) | 1 KB (-87%) | 8 KB (same) | 8 KB (same) | 8 KB (same) |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.4 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
| Pin Count | 16 | 16 | 16 | 16 | 16 | 16 |
| Debug Interface | RS08 BGND | RS08 BGND | RS08 BGND | S08 BDM | S08 BDM | S08 BDM |
주요 차별점
- RS08 core with HC08 superset instruction compatibility (vs MC9RS08KA1CDBR)
- 8 KB Flash versus 4 KB in lower-tier RS08KB variants (vs MC9RS08KB4CWJ)
- Wide 2.7 V to 5.5 V supply range with industrial temperature (vs MC9S08QE8CTG)
설계 노트
Place a 0.1 uF decoupling capacitor as close as possible to the VDD pin (pin 5) and VSS pin (pin 6), and a bulk 1 uF to 10 uF tantalum or ceramic on the supply rail. The MC9RS08KB8CTG operates from 2.7 V to 5.5 V; an LDO ahead of the MCU reduces ripple that couples into the ADC reference. Add a bulk capacitor at the regulator output to handle in-rush when the MCU wakes from stop modes.
Route the BKGD/MS pin (pin 15) directly to a debug header with a short, noise-free trace. Keep reset traces short and avoid routing them parallel to high-current switching lines. The TSSOP-16 footprint benefits from a small ground pour under the MCU and 0.1 uF bypass caps adjacent to each supply-adjacent pin to reduce EMI susceptibility and improve ADC accuracy.
Ensure unused pins are configured as outputs (or inputs with the internal pull-up enabled and externally terminated) per the datasheet, not left floating - floating inputs can drift into the linear region and draw extra current or trigger spurious interrupts. Do not exceed 5.5 V on any pin; the RS08KB is not 5 V tolerant on all digital pins when operating at lower VDD. Verify the reset pin is not driven externally during power-up to avoid locking the BGND debug mode.
For ADC applications, the MC9RS08KB8CTG's ADC reference stability directly affects conversion accuracy. Use a low-impedance reference decoupling network and avoid routing ADC inputs near switching nodes or PWM outputs. Use the smallest possible analog input bandwidth consistent with the signal of interest; additional input filtering reduces aliasing and improves effective resolution in noisy industrial environments.
규정 준수 정보
RoHS-compliant per distributor listings. AEC-Q100 qualification depends on specific variant - check NXP product page for automotive-grade ordering codes.
