MC9S12D32CFUE - 16-bit HCS12 MCU, 32KB Flash, 80-QFP | NXP
부품 번호: MC9S12D32CFUE ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.12 | $18.12 |
| 10 | $16.5 | $165.00 |
| 100 | $13.95 | $1,395.00 |
| 500 | $11.4 | $5,700.00 |
| 1,000 | $9.2 | $9,200.00 |
MC9S12D32CFUE 개요
A 16-bit microcontroller (MCU) is an integrated computing core that executes instructions on 16-bit data paths, providing higher arithmetic precision than 8-bit devices while remaining simpler and cheaper than 32-bit Cortex-M parts. Within the broader taxonomy, the HCS12 belongs to the S12 family of automotive microcontrollers (MCU -> 16-bit MCU -> HCS12 -> S12D sub-family -> automotive microcontroller). The MC9S12D32CFUE runs from a single 2.5 V or 5 V supply, supports an external bus interface (8-bit narrow mode), and is built around the BGND/BDM debug module that allows non-intrusive in-circuit development.
Key features of this part include 32 KB of Flash program memory, 2 KB of RAM, 1 KB of EEPROM, an 8-channel 10-bit ADC, an 8-channel PWM timer, a CAN 2.0 controller, dual SCI (UART) channels, SPI, and I2C. The S12D core is a CISC architecture with full 16-bit internal data paths, supporting single-wire BDM (Background Debug Mode) for non-intrusive in-circuit programming and debugging. The 80-QFP package is pin-compatible across most S12D family members, allowing easy memory-scaling upgrades.
Typical applications include automotive body controllers, HVAC control panels, instrument clusters, industrial sensor hubs, CAN node bridges, and small appliance motor controllers. Because the part is NRND, design engineers should plan migration to an active S12K, S12XS, or S32K1 family member for new programs, while continuing to use the MC9S12D32CFUE in long-lifecycle fielded designs.
드롭인 대체품: MC9S12D32CFUE — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MC9S12D32CFUE (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage, Program Memory Size, RAM Size, ADC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MC9S12D64CFUE
✅ 드롭인✓ 재고 있음
$16.2 / 개
데이터시트 보기 →MC9S12D128CFUE
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MC9S12D32MFUE
✅ 드롭인✓ 재고 있음
$26.4032 / 개
데이터시트 보기 →MC9S12D32VFUE
✅ 드롭인✓ 재고 있음
$10.32 / 개
데이터시트 보기 →MC9S12D64CFUER
✅ 드롭인✓ 재고 있음
$10.4 / 개
데이터시트 보기 →MC9S12D32CFUE 최대 정격 & 전기적 특성
| Core | HCS12 (16-bit CISC) |
| Family | S12D sub-family |
| Program Memory | 32 KB Flash |
| RAM | 2 KB |
| EEPROM | 1 KB |
| Maximum CPU Frequency | 25 MHz |
| 공급 전압 | 2.5 V / 5 V |
| ADC | 8-channel, 10-bit |
| PWM Channels | 8 |
| CAN | 1 x CAN 2.0 |
| SCI (UART) | 2 |
| SPI | 1 |
| I2C | 1 |
| 패키지 | 80-QFP (14x14 mm) |
| 실장 유형 | Surface Mount |
| 동작 온도 | -40C to +85C |
| Debug Interface | Single-wire BDM (Background Debug Mode) |
MC9S12D32CFUE 80-qfp (14x14 mm) 핀 구성 가이드
MC9S12D32CFUE(80-qfp (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MC9S12D32CFUE.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MC9S12D32CFUE 적합 용도: 6 애플리케이션s: Automotive Body Control Module, Industrial CAN Sensor Hub, HVAC Climate Control Panel, Instrument Cluster Display Controller, Small Appliance Motor Controller, Automotive Door-Mirror and Seat Module.
Automotive Body Control Module
The MC9S12D32CFUE suits body control modules (BCM) thanks to its CAN 2.0 controller and 16-bit HCS12 core running at 25 MHz, which is fast enough for central locking, lighting PWM and door-mirror position loops. The 8-channel 10-bit ADC reads ambient light, temperature and switch inputs directly, while the 8 PWM channels drive lamps and motors without external drivers. A single 5 V supply simplifies harness design and the 80-QFP pinout is shared with the 64 KB and 128 KB D-family siblings, allowing easy software upgrades without PCB rework. For new BCM programs, however, prefer the S12K or S32K1 active families; the MC9S12D32CFUE is now NRND.
추천
Industrial CAN Sensor Hub
Industrial sensor hubs that aggregate discrete inputs onto a CAN backbone benefit from the MC9S12D32CFUE's integrated CAN 2.0 controller plus its 8-channel 10-bit ADC for analog transducers. The 32 KB Flash and 1 KB EEPROM allow run-time configuration storage directly on-chip, eliminating external EEPROM. SCI (UART) and SPI ports let the hub act as a gateway to RS-232/485 debug ports or to local SPI sensors. The 80-QFP industrial-grade temperature range (-40C to +85C) suits cabinet-mounted equipment, and the single-wire BDM simplifies field firmware updates without removing the PCB from the chassis.
추천
HVAC Climate Control Panel
HVAC climate panels need a quiet core, reliable PWM for blower motors and a simple keypad/display interface - exactly the workload the MC9S12D32CFUE targets at 25 MHz. Its 8 PWM channels drive the blower, mode doors and blend actuators without an external PWM controller. The 2 KB RAM supports a small RTOS or simple round-robin scheduler, while 32 KB Flash fits full climate control firmware with diagnostic tables. Two SCI channels split firmware debug from a UART link to a wireless module, and the CAN bus integrates with the rest of the vehicle network.
추천
Instrument Cluster Display Controller
Small to mid-range instrument clusters that drive a stepper-motor gauge cluster or a 7-segment display benefit from the MC9S12D32CFUE's 8 PWM channels and 91 GPIO lines. The 16-bit HCS12 core computes average fuel consumption and trip math without overflowing, while 32 KB Flash is sufficient for gauge sweep calibration tables and warning-lamp logic. CAN acts as the gateway to the powertrain ECU, and SPI drives the gauge driver or segment display controller. Because the part is pin-compatible with the D64/D128, the same PCB supports both entry-level and feature-rich cluster variants.
추천
Small Appliance Motor Controller
White-goods appliances such as washing-machine drain pumps, dishwasher circulation pumps, and refrigerator compressors use the MC9S12D32CFUE as a low-cost BLDC or AC-induction motor controller. The 25 MHz HCS12 plus 8-channel 10-bit ADC samples back-EMF and current, while the 8 PWM channels generate complementary drive signals for a 3-phase inverter. CAN and SCI expose diagnostics for factory programming and field service. The 32 KB Flash holds vector-control libraries with sensorless startup routines; the 1 KB EEPROM stores motor calibration constants across power cycles.
추천
Automotive Door-Mirror and Seat Module
Door-mirror positioning, seat-mirror memory and seat-occupancy modules use the MC9S12D32CFUE for its small size, LIN/CAN connectivity and PWM channels. The 16-bit core computes PID position loops for two motors at once, the 32 KB Flash holds mirror/position memory maps and the 1 KB EEPROM remembers user presets across power cycles. SPI and SCI expose a service-port for diagnostics and factory calibration. Because the QFP-80 pinout is shared across the S12D family, the same PCB can populate D32, D64 or D128 depending on the number of features required.
추천
추천 제품 요약
엔지니어링 참조 데이터: MC9S12D32CFUE — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MC9S12D64CFUE | MC9S12D128CFUE | MC9S12D32MFUE | MC9S12D32VFUE | MC9S12D64CFUER |
|---|---|---|---|---|---|---|
| Package | 80-QFP (14x14) | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12, 25 MHz | HCS12, 25 MHz | HCS12, 25 MHz | HCS12, 25 MHz | HCS12, 25 MHz | HCS12, 25 MHz |
| Flash Memory | 32 KB | 64 KB | 128 KB | 32 KB | 32 KB | 64 KB |
| RAM | 2 KB | 4 KB | 8 KB | 2 KB | 2 KB | 4 KB |
| EEPROM | 1 KB | 1 KB | 2 KB | 1 KB | 1 KB | 1 KB |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +125C | -40C to +85C |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
| CAN Controllers | 1 | 1 | 1 | 1 | 1 | 1 |
주요 차별점
- Memory-upgradeable family on identical 80-QFP footprint (vs MC9S12D64CFUE)
- Industrial vs automotive temperature grade selectable within family (vs MC9S12D32MFUE)
- Single-wire BDM for non-intrusive in-circuit debug (vs MC9S12D64CFUER)
설계 노트
The MC9S12D32CFUE requires a clean 5 V (or 2.5 V) VDD rail plus a separate VDDR/VSS pair for the on-chip voltage regulator that powers the HCS12 core. Place a 10 uF ceramic + 100 nF decoupling combination on each VDD pin, within 5 mm of the package pad. The internal regulator needs at least 4.75 V on VDDR to start the core cleanly; a hold-up bulk capacitor on VDDR is recommended for automotive cranking profiles that dip to 6 V for 100 ms.
Estimated: at full 25 MHz operation on all 91 GPIO toggling, the MCU dissipates approximately 250 mW of core power. The 80-QFP package theta_JA is roughly 55 C/W on a 4-layer JEDEC board, so worst-case junction temperature rise is around 14C above ambient - well within the -40C to +85C industrial window. For closed enclosures, derate by 20% if ambient exceeds 60C.
Keep the BDM (BKGD) trace under 100 mm with no stub branches; if you split the BDM connector across the board, place a 1 kohm pull-up on BKGD. Route the CANH/CANL differential pair with 120 ohm characteristic impedance and 5 mm spacing; place a 4.7 nF split termination at each node. Avoid running the 25 MHz EXTAL/XTAL traces within 3 mm of analog ADC inputs to prevent digital switching noise from coupling into ADC results.
Do not assume the MC9S12D32CFUE is active for new programs - NXP marks it NRND. For production designs after 2027, plan migration to MC9S12XEQ512CAG (S12XE family) or to S32K1 series. Also note that the SCI bootloader requires BKGD held low at reset; misuse of this pin (leaving it floating) is the most common cause of 'bricked' boards during in-field firmware updates.
규정 준수 정보
RoHS compliant per NXP product page; lead-free matte tin plating. Not AEC-Q100 qualified in this -40C to +85C grade; choose 'M' or 'V' suffix (e.g. MC9S12D32MFUE) for AEC-Q100 automotive qualification.