MCF51JU32VHS - 50MHz 32KB Flash MCU | NXP | Embedded
부품 번호: MCF51JU32VHS ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $1.1106 | $1.11 |
| 10 | $1.1106 | $11.11 |
| 100 | $1.1106 | $111.06 |
| 500 | $1.1106 | $555.30 |
| 1,000 | $1.1106 | $1,110.60 |
MCF51JU32VHS 개요
A microcontroller is a semiconductor device that integrates a processor core, memory, peripherals, and communication interfaces into one compact component. Within the product hierarchy, the MCF51JU32VHS belongs to the MCF51Jx microcontroller family and uses the ColdFire V1 architecture. This integration allows embedded systems to execute firmware, acquire analog signals, control external hardware, and communicate with USB devices without requiring several separate discrete components.
The verified product information identifies a 32-bit architecture, 50 MHz operating frequency, 32 KB Flash, USB device support, and analog capabilities. Its 44-MAPLGA package provides a compact surface-mount solution for space-constrained designs. The NXP product page identifies the part as active, while distributor listings provide availability, pricing, package, and ordering information.
The ColdFire V1 core is intended for embedded control workloads where a 32-bit processor and integrated peripherals can simplify system design. Flash memory stores program code, while the USB device interface can support connected control, configuration, or data-transfer functions. Analog capabilities broaden the device’s usefulness for products that need to interface with sensors or other continuous signals.
Typical applications include USB-connected consumer devices, low-power embedded control systems, IoT endpoint controllers, compact instrumentation, and industrial products with a small environmental or industrial temperature-grade requirement. Designers should confirm voltage limits, pin functions, clock requirements, memory-map details, USB electrical requirements, and exposed-pad layout from the official NXP datasheet before releasing a PCB.
For a new layout, place required decoupling capacitors close to the supply pins, route sensitive analog and USB signals away from noisy switching paths, and follow the manufacturer’s exposed-pad land pattern. The verified data does not include complete pin names, electrical ratings, or detailed memory organization, so those items must be obtained from the manufacturer datasheet.
This product page combines the verified NXP overview, distributor package information, and cross-reference results with engineering guidance for embedded-product evaluation. It is intended to help engineers identify the MCU, assess its core and memory, and plan validation before procurement or PCB release.
드롭인 대체품: MCF51JU32VHS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCF51JU32VHS (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Mounting Type, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCF51JF32VHS
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCF51QU32VHS
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MCF51JU32VHS
✅ 드롭인✓ 재고 있음
$1.1106 / 개
데이터시트 보기 →MCF51JU32VHS 최대 정격 & 전기적 특성
| Architecture | 32-bit ColdFire V1 core |
| Maximum Operating Frequency | 50 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K x 8 bits |
| USB Support | USB device |
| Analog Capabilities | Analog functions |
| 패키지 | 44-MAPLGA, 5 mm x 5 mm |
| Terminal Count | 44 terminals |
| 실장 유형 | No-lead surface mount |
| Product Family | MCF51Jx |
| Core | ColdFire V1 |
| Application Category | Low-power embedded applications |
| Application Category | Consumer electronics |
| Product Status | Active |
| Manufacturer | NXP Semiconductors |
MCF51JU32VHS 44-maplga, 5 mm x 5 mm 핀 구성 가이드
MCF51JU32VHS(44-maplga, 5 mm x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCF51JU32VHS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCF51JU32VHS 적합 용도: 6 애플리케이션s: USB Consumer Device Controller, Low-Power Embedded Control, IoT Endpoint Controller, Analog Sensor Interface, Compact Instrumentation Controller, Industrial Embedded Product.
USB Consumer Device Controller
The MCF51JU32VHS fits a USB consumer-device controller because the verified part combines a 32-bit ColdFire V1 core, 50 MHz operation, 32 KB Flash, and USB device capability in a 44-MAPLGA package. It can execute device firmware, monitor application inputs, and manage USB-connected control functions without a separate processor. The compact package also helps limit board area in consumer products. Before design release, confirm USB speed, endpoint resources, bus voltage, power requirements, and software support from the NXP datasheet; those details are not included in the supplied data.
추천
Low-Power Embedded Control
The 50 MHz 32-bit ColdFire V1 core and 32 KB Flash make MCF51JU32VHS a candidate for compact embedded-control products that need local firmware and responsive peripheral handling. Its verified 44-MAPLGA package supports space-conscious layouts, while the microcontroller integration can reduce the number of external components. Designers should select a low-power operating mode and validate current consumption, clock startup, brownout behavior, and sleep-state wake-up requirements using the official documentation, because the supplied data does not state those electrical values.
추천
IoT Endpoint Controller
MCF51JU32VHS can serve as an IoT endpoint controller when the product needs local control logic, USB connectivity, and analog signal handling rather than a high-memory application processor. The verified 32 KB Flash stores application code, and the 50 MHz ColdFire V1 core provides a dedicated real-time control platform. The part’s suitability depends on the required wireless interface, sensor I/O, power budget, and operating temperature, none of which are fully specified in the supplied search data. Use the manufacturer datasheet to validate those requirements before selecting it for an IoT product.
추천
Analog Sensor Interface
The verified analog capabilities of MCF51JU32VHS make it relevant to embedded products that combine sensor acquisition with local control. A designer could use the MCU to digitize or supervise analog signals, apply control logic, and expose status through USB or another supported interface. The 50 MHz core provides a performance margin for coordinating peripheral activity, but ADC resolution, input count, sampling rate, reference voltage, and channel multiplexing are not provided in the verified data. Those specifications must be confirmed before assigning analog pins or setting acquisition timing.
추천
Compact Instrumentation Controller
A compact instrumentation product can use MCF51JU32VHS as the central controller for configuration, measurement supervision, and USB data transfer. The verified 32-bit architecture and 50 MHz operating frequency support embedded signal-processing and control tasks, while 32 KB Flash provides dedicated firmware storage. The 44-MAPLGA package is useful where board space is constrained. Because calibration accuracy, ADC performance, reference sources, timing peripherals, and operating-temperature limits are not included in the supplied data, instrumentation designs should verify those parameters against the NXP datasheet and application requirements.
추천
Industrial Embedded Product
MCF51JU32VHS is a candidate for compact industrial embedded products that require deterministic local control and USB device connectivity. Its 50 MHz ColdFire V1 core can coordinate peripheral activity, and the integrated MCU architecture can simplify a board compared with separate processor, memory, and interface devices. The supplied information does not confirm industrial temperature qualification, supply-voltage limits, isolation, EMC, or long-term availability commitments. Those requirements must be checked in the official product documentation before the part is used in an industrial release.
추천
엔지니어링 참조 데이터: MCF51JU32VHS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCF51JF32VHS | MCF51QU32VHS | MCF51JU32VHS |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
주요 차별점
- Integrated USB device capability (vs MCF51JF32VHS)
- 50 MHz ColdFire V1 processing (vs MCF51QU32VHS)
- Known 32 KB Flash configuration (vs MCF51JF32VHS)
설계 노트
Use the official NXP package drawing for the 44-MAPLGA footprint and exposed-pad implementation. Place the required power and ground connections directly through the package’s recommended land pattern, and preserve adequate solder-mask and paste control for the 5 mm x 5 mm no-lead device. Do not derive pad dimensions from the distributor package name alone.
Place the manufacturer-recommended decoupling capacitors close to the applicable supply pins and keep the return path short and continuous. Because the supplied data does not state the operating-voltage range, capacitor values, supply sequencing, or power-consumption limits, use the NXP datasheet and reference design for final values. Validate startup, reset, brownout, and USB bus-power behavior on prototype hardware.
Keep USB traces, analog inputs, and clock-related routes away from noisy power switches and high-current return paths. Use a continuous ground reference where possible, minimize loop area, and follow the manufacturer’s recommended pin multiplexing and peripheral-routing guidance. The supplied evidence does not include the complete pinout, so final trace assignment must wait for the official pin table.
규정 준수 정보
The supplied search results identify NXP product status and package information but do not provide verified RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed from the manufacturer’s current product documentation.
