MCF52230CAL60 - ColdFire V2 32-bit MCU 128KB Flash 60MHz 112-LQFP | NXP
부품 번호: MCF52230CAL60 ✗ 단종| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $19.04 | $19.04 |
| 10 | $17.5 | $175.00 |
| 100 | $15.8 | $1,580.00 |
| 500 | $14.2 | $7,100.00 |
| 1,000 | $12.75 | $12,750.00 |
MCF52230CAL60 개요
Background: A ColdFire microcontroller is a 32-bit reduced instruction set computing (RISC) processor architecture originally derived from the Motorola 68000 family and now maintained by NXP Semiconductors. ColdFire V2 microcontrollers belong to the family of embedded microcontrollers (MCUs), which sit within the broader hierarchy of microprocessors -> microcontrollers -> embedded controllers. They are widely used in industrial control, factory automation, and networked embedded devices where deterministic 32-bit performance, low power, and integrated peripherals reduce total system BOM cost.
Key differentiating specifications include the integrated Fast Ethernet Controller with embedded physical layer (FEC+EPHY), a 32-bit ColdFire V2 core running at 60 MHz delivering up to 56 MIPS, 128 KB of program Flash, 16 KB of SRAM, and a 4-channel DMA controller. The device also integrates a Cryptographic Acceleration Unit on related family members, multiple timers (including a 4-channel 32-bit timer and 4-channel 16-bit timer), an 8-channel 12-bit ADC, and a wide peripheral set including QSPI, I2C, UARTs, and a CAN module on related family members.
Architecturally, the MCF52230CAL60 uses a variable-length ColdFire instruction set optimized for code density, a unified instruction/data cache-less memory architecture suitable for deterministic interrupt response, and integrated Ethernet DMA paths that offload packet handling. The integrated PHY eliminates external magnetics interface circuitry in many designs and reduces PCB complexity for connected industrial nodes.
Typical applications include industrial Ethernet I/O modules, factory automation controllers, building automation gateways, networked sensor hubs, and serial-to-Ethernet protocol converters. The wide operating temperature range (-40C to +85C) and integrated Ethernet make it well-suited to industrial networking designs where an external MCU plus discrete Ethernet controller would inflate cost.
When designing with the MCF52230CAL60, note that the part is NRND and NXP recommends migration to the Kinetis or i.MX RT families for new designs. Existing designs should validate the supply chain carefully, as authorized distributor stock is declining and lead times may extend significantly. Ensure the 3.3 V supply is well-decoupled and the integrated PHY is provided with a proper 50 ohm reference clock source per the MCF52235 reference manual.
This page synthesizes NXP distributor pricing, drop-in ColdFire V2 family alternatives within the MCF5223x series, and practical maintenance-design notes not consolidated in a single place on the manufacturer's product page.
드롭인 대체품: MCF52230CAL60 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCF52230CAL60 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Lifecycle Status, Ethernet, Flash Memory, Mounting Type.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCF52231CAL60
✅ 드롭인✓ 재고 있음
$9.85 / 개
데이터시트 보기 →MCF52233CAL60
✅ 드롭인✓ 재고 있음
$33.95 / 개
데이터시트 보기 →MCF52234CAL60
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MCF52235CAL60
✅ 드롭인✓ 재고 있음
$34.15 / 개
데이터시트 보기 →MCF52230CAF60
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MCF52223CAF80
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MCF52230CAL60 최대 정격 & 전기적 특성
| Core Architecture | ColdFire V2 (32-bit RISC) |
| Maximum Core Frequency | 60 MHz |
| Program Flash | 128 KB (128K x 8) |
| SRAM | 16 KB |
| 공급 전압 | 3.0 V to 3.6 V |
| 데이터 버스 폭 | 32 bit |
| Ethernet | 10/100 MAC + integrated PHY (FEC + EPHY) |
| ADC | 8-channel, 12-bit |
| DMA Channels | 4 |
| Timers | 4-channel 32-bit + 4-channel 16-bit |
| Communication Peripherals | QSPI, 2x I2C, 3x UART, CAN (on related family members) |
| 패키지 | 112-LQFP (20x20 mm) |
| 동작 온도 | -40C to +85C |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| RoHS 상태 | Compliant |
| 수명 주기 상태 | NRND (Not Recommended for New Designs) |
| Processor Series | MCF5223x |
MCF52230CAL60 112-lqfp (20x20 mm) 핀 구성 가이드
MCF52230CAL60(112-lqfp (20x20 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCF52230CAL60.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCF52230CAL60 적합 용도: 7 애플리케이션s: Industrial Ethernet I/O Module, Factory Automation Controller, Building Automation Gateway, Networked Sensor Hub, Serial-to-Ethernet Protocol Converter, Embedded Industrial Printer Controller, Smart Grid Concentrator Node.
Industrial Ethernet I/O Module
The MCF52230CAL60 fits industrial Ethernet I/O modules because its integrated Fast Ethernet Controller plus embedded PHY (FEC+EPHY) eliminates a discrete MAC-plus-external-PHY pair. With 60 MHz ColdFire V2 performance delivering roughly 56 MIPS, the device can run Modbus TCP, EtherNet/IP, or PROFINET slave stacks alongside digital I/O scan loops within deterministic cycle budgets. The 128 KB Flash holds a TCP/IP stack plus application logic, while the 16 KB SRAM buffers packet payloads. Industrial temperature grade (-40C to +85C) supports factory floor deployment.
추천
Factory Automation Controller
The MCF52230CAL60 fits factory automation controllers as a supervisory node combining deterministic 32-bit processing with integrated Ethernet and serial connectivity. The 8-channel 12-bit ADC interfaces directly to analog sensors (temperature, pressure, flow), while the QSPI bus drives high-speed peripherals such as external Flash or DAC chips. The 4-channel DMA engine offloads Ethernet packet copying, freeing CPU cycles for control loops. Multiple UARTs and I2C buses connect to motor drives, HMIs, and sensor networks typical of modern PLC architectures.
추천
Building Automation Gateway
The MCF52230CAL60 is well-suited to building automation gateways that translate between Ethernet backbone protocols (BACnet/IP, Modbus TCP) and field buses (RS-485, CAN, KNX). The integrated 10/100 Ethernet with PHY provides the backbone connection without external magnetics, while the three UARTs drive RS-485 transceivers for sub-network aggregation. The wide operating temperature range (-40C to +85C) supports unheated equipment rooms and outdoor enclosures, and the 112-LQFP package simplifies two-layer PCB layouts for cost-sensitive commercial installations.
추천
Networked Sensor Hub
The MCF52230CAL60 fits networked sensor hubs that aggregate analog and digital sensor data and forward it over Ethernet. The 8-channel 12-bit ADC reads analog sensor arrays directly, the timers drive PWM outputs for actuator control, and the integrated FEC+EPHY uploads results via TCP or UDP without external MAC silicon. The 60 MHz ColdFire V2 core processes filtering and calibration algorithms in real time. The 128 KB Flash and 16 KB SRAM are sufficient for typical sensor-fusion firmware with a small embedded IP stack.
추천
Serial-to-Ethernet Protocol Converter
The MCF52230CAL60 fits serial-to-Ethernet protocol converters that bridge legacy RS-232/RS-485 industrial equipment to modern IP networks. The three UARTs connect simultaneously to multiple legacy serial devices, while the integrated Ethernet stack terminates TCP or UDP connections transparently. The ColdFire V2 core runs the protocol-translation firmware with low interrupt latency, and the 4-channel DMA engine handles data movement between UART FIFOs and Ethernet buffers. This topology is common in retrofit industrial modernization projects where older PLCs lack Ethernet.
추천
Embedded Industrial Printer Controller
The MCF52230CAL60 fits embedded industrial printer controllers that require deterministic real-time stepping plus network management. The 4-channel 32-bit timer drives stepper motor PWM at precise microstep rates, while the integrated Ethernet provides remote job submission and status reporting. The QSPI bus interfaces to high-speed label printers, and the 8-channel ADC monitors print head temperature and supply voltage. The wide operating temperature range supports industrial print cells without climate control.
추천
Smart Grid Concentrator Node
The MCF52230CAL60 fits smart grid concentrator nodes that aggregate data from multiple utility meters and forward it via Ethernet to back-office systems. The multiple UARTs drive RS-485 meter bus interfaces, the timers synchronize acquisition windows, and the integrated Ethernet terminates secure IP connections to head-end systems. Industrial temperature grade (-40C to +85C) supports outdoor cabinet deployment. The 128 KB Flash accommodates DLMS/COSEM or IEC 61850 client stacks alongside metering firmware.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCF52230CAL60 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCF52231CAL60 | MCF52233CAL60 | MCF52234CAL60 | MCF52235CAL60 | MCF52230CAF60 | MCF52223CAF80 |
|---|---|---|---|---|---|---|---|
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit |
| Maximum Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 80 MHz | 80 MHz |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
주요 차별점
- Base MCF5223x 128 KB Flash variant without CAN or crypto (vs MCF52235CAL60)
- Integrated Ethernet PHY on-die (vs MCF52223CAF80)
- 60 MHz speed grade for power-constrained designs (vs MCF52230CAF60)
설계 노트
The MCF52230CAL60 requires a single 3.0 V to 3.6 V supply. Place at least one 10 uF bulk tantalum or ceramic capacitor plus a 0.1 uF decoupling ceramic within 5 mm of each VDD/VSS pin pair. The integrated Ethernet PHY draws transient currents during packet transmission; provide at least 100 uF of bulk capacitance on the analog 3.3 V PLL supply (VDD_PLL) per the MCF52235 reference manual to prevent Ethernet jitter from coupling into the PLL.
Because the MCF52230CAL60 is in NRND lifecycle, do not use it for new product designs. The NXP product page recommends migration to the Kinetis KE1xF or i.MX RT1060 families for new programs. Existing designs should validate long-term authorized supply with their distributor and qualify a secondary source on the bill of materials to avoid line-down scenarios as stock depletes.
The 112-LQFP package has theta_JA typically around 50 C/W on a standard 4-layer JEDEC test board with copper pour. At maximum core frequency of 60 MHz the MCF52230CAL60 typically dissipates under 500 mW, well within the package thermal envelope. Industrial deployments should still expose the package to a thermal copper pour of at least 1 square inch on top and inner PCB layers for margin.
Route the integrated Ethernet PHY differential pairs (EPHY_TXP/N and EPHY_RXP/N) as 100 ohm differential microstrip with matched lengths within 150 mil tolerance per the MCF52235 reference manual. Keep the 50 MHz EPHY reference clock trace short and guarded by ground to minimize EMI. Place the BDM debug header (BKPT, DSCLK, DSI, DSO, GND) at the board edge for in-circuit programming access.
규정 준수 정보
RoHS compliant per NXP product page and DigiKey parametric data. 112-LQFP package is lead-free (Pb-free) matte-tin plated. MSL Level 3 (168 hour floor life) per JEDEC J-STD-020. Not AEC-Q100 qualified - this part targets industrial/commercial, not automotive.
