MCF52230CAL60 - ColdFire V2 32-bit MCU 128KB Flash 60MHz 112-LQFP | NXP
N.º da peça: MCF52230CAL60 ✗ Fim de vida| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $19.04 | $19,04 |
| 10 | $17.5 | $175,00 |
| 100 | $15.8 | $1.580,00 |
| 500 | $14.2 | $7.100,00 |
| 1.000 | $12.75 | $12.750,00 |
MCF52230CAL60 Visão geral
Background: A ColdFire microcontroller is a 32-bit reduced instruction set computing (RISC) processor architecture originally derived from the Motorola 68000 family and now maintained by NXP Semiconductors. ColdFire V2 microcontrollers belong to the family of embedded microcontrollers (MCUs), which sit within the broader hierarchy of microprocessors -> microcontrollers -> embedded controllers. They are widely used in industrial control, factory automation, and networked embedded devices where deterministic 32-bit performance, low power, and integrated peripherals reduce total system BOM cost.
Key differentiating specifications include the integrated Fast Ethernet Controller with embedded physical layer (FEC+EPHY), a 32-bit ColdFire V2 core running at 60 MHz delivering up to 56 MIPS, 128 KB of program Flash, 16 KB of SRAM, and a 4-channel DMA controller. The device also integrates a Cryptographic Acceleration Unit on related family members, multiple timers (including a 4-channel 32-bit timer and 4-channel 16-bit timer), an 8-channel 12-bit ADC, and a wide peripheral set including QSPI, I2C, UARTs, and a CAN module on related family members.
Architecturally, the MCF52230CAL60 uses a variable-length ColdFire instruction set optimized for code density, a unified instruction/data cache-less memory architecture suitable for deterministic interrupt response, and integrated Ethernet DMA paths that offload packet handling. The integrated PHY eliminates external magnetics interface circuitry in many designs and reduces PCB complexity for connected industrial nodes.
Typical applications include industrial Ethernet I/O modules, factory automation controllers, building automation gateways, networked sensor hubs, and serial-to-Ethernet protocol converters. The wide operating temperature range (-40C to +85C) and integrated Ethernet make it well-suited to industrial networking designs where an external MCU plus discrete Ethernet controller would inflate cost.
When designing with the MCF52230CAL60, note that the part is NRND and NXP recommends migration to the Kinetis or i.MX RT families for new designs. Existing designs should validate the supply chain carefully, as authorized distributor stock is declining and lead times may extend significantly. Ensure the 3.3 V supply is well-decoupled and the integrated PHY is provided with a proper 50 ohm reference clock source per the MCF52235 reference manual.
This page synthesizes NXP distributor pricing, drop-in ColdFire V2 family alternatives within the MCF5223x series, and practical maintenance-design notes not consolidated in a single place on the manufacturer's product page.
Alternativas drop-in para MCF52230CAL60 — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com MCF52230CAL60 (mesmo formato e footprint) — diferindo em Package, Lifecycle Status, Ethernet, Flash Memory, Mounting Type.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
MCF52231CAL60
✅ Drop-In✓ Em estoque
$9.85 / unidade
Ver ficha técnica →MCF52233CAL60
✅ Drop-In✓ Em estoque
$33.95 / unidade
Ver ficha técnica →MCF52234CAL60
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MCF52235CAL60
✅ Drop-In✓ Em estoque
$34.15 / unidade
Ver ficha técnica →MCF52230CAF60
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MCF52223CAF80
✅ Drop-In✓ Em estoque
Consulte o preço
Ver ficha técnica →MCF52230CAL60 Classificações máximas e características elétricas
| Core Architecture | ColdFire V2 (32-bit RISC) |
| Maximum Core Frequency | 60 MHz |
| Program Flash | 128 KB (128K x 8) |
| SRAM | 16 KB |
| Tensão de alimentação | 3.0 V to 3.6 V |
| Largura do barramento de dados | 32 bit |
| Ethernet | 10/100 MAC + integrated PHY (FEC + EPHY) |
| ADC | 8-channel, 12-bit |
| DMA Channels | 4 |
| Timers | 4-channel 32-bit + 4-channel 16-bit |
| Communication Peripherals | QSPI, 2x I2C, 3x UART, CAN (on related family members) |
| Encapsulamento | 112-LQFP (20x20 mm) |
| Temperatura de operação | -40C to +85C |
| Tipo de montagem | Surface Mount |
| Nível MSL | 3 (168 hours) |
| Status RoHS | Compliant |
| Status do ciclo de vida | NRND (Not Recommended for New Designs) |
| Processor Series | MCF5223x |
Guia de Configuração de Pinos do MCF52230CAL60 112-lqfp (20x20 mm)
Configuração de pinos para MCF52230CAL60 (pacote 112-lqfp (20x20 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para MCF52230CAL60.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
MCF52230CAL60 é adequado para 7 aplicaçãos: Industrial Ethernet I/O Module, Factory Automation Controller, Building Automation Gateway, Networked Sensor Hub, Serial-to-Ethernet Protocol Converter, Embedded Industrial Printer Controller, Smart Grid Concentrator Node.
Industrial Ethernet I/O Module
The MCF52230CAL60 fits industrial Ethernet I/O modules because its integrated Fast Ethernet Controller plus embedded PHY (FEC+EPHY) eliminates a discrete MAC-plus-external-PHY pair. With 60 MHz ColdFire V2 performance delivering roughly 56 MIPS, the device can run Modbus TCP, EtherNet/IP, or PROFINET slave stacks alongside digital I/O scan loops within deterministic cycle budgets. The 128 KB Flash holds a TCP/IP stack plus application logic, while the 16 KB SRAM buffers packet payloads. Industrial temperature grade (-40C to +85C) supports factory floor deployment.
Recomendado
Factory Automation Controller
The MCF52230CAL60 fits factory automation controllers as a supervisory node combining deterministic 32-bit processing with integrated Ethernet and serial connectivity. The 8-channel 12-bit ADC interfaces directly to analog sensors (temperature, pressure, flow), while the QSPI bus drives high-speed peripherals such as external Flash or DAC chips. The 4-channel DMA engine offloads Ethernet packet copying, freeing CPU cycles for control loops. Multiple UARTs and I2C buses connect to motor drives, HMIs, and sensor networks typical of modern PLC architectures.
Recomendado
Building Automation Gateway
The MCF52230CAL60 is well-suited to building automation gateways that translate between Ethernet backbone protocols (BACnet/IP, Modbus TCP) and field buses (RS-485, CAN, KNX). The integrated 10/100 Ethernet with PHY provides the backbone connection without external magnetics, while the three UARTs drive RS-485 transceivers for sub-network aggregation. The wide operating temperature range (-40C to +85C) supports unheated equipment rooms and outdoor enclosures, and the 112-LQFP package simplifies two-layer PCB layouts for cost-sensitive commercial installations.
Recomendado
Networked Sensor Hub
The MCF52230CAL60 fits networked sensor hubs that aggregate analog and digital sensor data and forward it over Ethernet. The 8-channel 12-bit ADC reads analog sensor arrays directly, the timers drive PWM outputs for actuator control, and the integrated FEC+EPHY uploads results via TCP or UDP without external MAC silicon. The 60 MHz ColdFire V2 core processes filtering and calibration algorithms in real time. The 128 KB Flash and 16 KB SRAM are sufficient for typical sensor-fusion firmware with a small embedded IP stack.
Recomendado
Serial-to-Ethernet Protocol Converter
The MCF52230CAL60 fits serial-to-Ethernet protocol converters that bridge legacy RS-232/RS-485 industrial equipment to modern IP networks. The three UARTs connect simultaneously to multiple legacy serial devices, while the integrated Ethernet stack terminates TCP or UDP connections transparently. The ColdFire V2 core runs the protocol-translation firmware with low interrupt latency, and the 4-channel DMA engine handles data movement between UART FIFOs and Ethernet buffers. This topology is common in retrofit industrial modernization projects where older PLCs lack Ethernet.
Recomendado
Embedded Industrial Printer Controller
The MCF52230CAL60 fits embedded industrial printer controllers that require deterministic real-time stepping plus network management. The 4-channel 32-bit timer drives stepper motor PWM at precise microstep rates, while the integrated Ethernet provides remote job submission and status reporting. The QSPI bus interfaces to high-speed label printers, and the 8-channel ADC monitors print head temperature and supply voltage. The wide operating temperature range supports industrial print cells without climate control.
Recomendado
Smart Grid Concentrator Node
The MCF52230CAL60 fits smart grid concentrator nodes that aggregate data from multiple utility meters and forward it via Ethernet to back-office systems. The multiple UARTs drive RS-485 meter bus interfaces, the timers synchronize acquisition windows, and the integrated Ethernet terminates secure IP connections to head-end systems. Industrial temperature grade (-40C to +85C) supports outdoor cabinet deployment. The 128 KB Flash accommodates DLMS/COSEM or IEC 61850 client stacks alongside metering firmware.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para MCF52230CAL60 — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | MCF52231CAL60 | MCF52233CAL60 | MCF52234CAL60 | MCF52235CAL60 | MCF52230CAF60 | MCF52223CAF80 |
|---|---|---|---|---|---|---|---|
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same | 112-LQFP (20x20 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit |
| Maximum Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 60 MHz | 80 MHz | 80 MHz |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND | NRND |
Principais diferenciais
- Base MCF5223x 128 KB Flash variant without CAN or crypto (vs MCF52235CAL60)
- Integrated Ethernet PHY on-die (vs MCF52223CAF80)
- 60 MHz speed grade for power-constrained designs (vs MCF52230CAF60)
Notas de projeto
The MCF52230CAL60 requires a single 3.0 V to 3.6 V supply. Place at least one 10 uF bulk tantalum or ceramic capacitor plus a 0.1 uF decoupling ceramic within 5 mm of each VDD/VSS pin pair. The integrated Ethernet PHY draws transient currents during packet transmission; provide at least 100 uF of bulk capacitance on the analog 3.3 V PLL supply (VDD_PLL) per the MCF52235 reference manual to prevent Ethernet jitter from coupling into the PLL.
Because the MCF52230CAL60 is in NRND lifecycle, do not use it for new product designs. The NXP product page recommends migration to the Kinetis KE1xF or i.MX RT1060 families for new programs. Existing designs should validate long-term authorized supply with their distributor and qualify a secondary source on the bill of materials to avoid line-down scenarios as stock depletes.
The 112-LQFP package has theta_JA typically around 50 C/W on a standard 4-layer JEDEC test board with copper pour. At maximum core frequency of 60 MHz the MCF52230CAL60 typically dissipates under 500 mW, well within the package thermal envelope. Industrial deployments should still expose the package to a thermal copper pour of at least 1 square inch on top and inner PCB layers for margin.
Route the integrated Ethernet PHY differential pairs (EPHY_TXP/N and EPHY_RXP/N) as 100 ohm differential microstrip with matched lengths within 150 mil tolerance per the MCF52235 reference manual. Keep the 50 MHz EPHY reference clock trace short and guarded by ground to minimize EMI. Place the BDM debug header (BKPT, DSCLK, DSI, DSO, GND) at the board edge for in-circuit programming access.
Informações de conformidade
RoHS compliant per NXP product page and DigiKey parametric data. 112-LQFP package is lead-free (Pb-free) matte-tin plated. MSL Level 3 (168 hour floor life) per JEDEC J-STD-020. Not AEC-Q100 qualified - this part targets industrial/commercial, not automotive.
