MCIMX6G2DVM05AA - i.MX 6UL ARM Cortex-A7 528MHz MPU | NXP
부품 번호: MCIMX6G2DVM05AA ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $18.4 | $18.40 |
| 10 | $16.55 | $165.50 |
| 100 | $14.7 | $1,470.00 |
| 500 | $13.1 | $6,550.00 |
| 1,000 | $11.75 | $11,750.00 |
MCIMX6G2DVM05AA 개요
An applications processor (AP) is a system-on-chip (SoC) class microprocessor optimized for running a full operating system (typically Linux) with rich peripherals. Within the broader taxonomy, this device sits at: applications processor -> microprocessor unit (MPU) -> integrated circuit -> semiconductor. The i.MX 6UltraLite family targets industrial HMI, IoT gateways, and low-cost connected devices that need Cortex-A application-class compute without the multimedia acceleration of higher-tier i.MX parts.
Key features include a single ARM Cortex-A7 core at 528 MHz with 32 KB L1 instruction cache and 32 KB L1 data cache, NEON media acceleration, and integrated LCD controller supporting up to WXGA resolution. The SoC provides dual Ethernet (10/100 Mbps with IEEE 1588), dual USB 2.0 with PHY, dual CAN-FD, multiple UART/SPI/I2C interfaces, and a 12-bit ADC. Power management integrates an internal LDO and DC-DC controller for low-power standby.
The architecture combines an ARM Cortex-A7 application core with NEON SIMD for multimedia codecs, a separate Cortex-M4-style sensor processing subsystem is absent on this 6UL part. Memory interface supports 16-bit LPDDR2/DDR3/DDR3L at up to 400 MHz. Hardware security includes secure boot, high assurance boot (HAB), and on-chip SRAM for cryptographic keys.
Typical applications include industrial IoT gateways, building automation controllers, HMI panels, point-of-sale terminals, smart energy meters, and portable medical devices. The 528 MHz Cortex-A7 offers sufficient throughput for Linux-based GUI stacks while consuming under 500 mW typical.
When designing with this part, ensure proper DDR routing with matched impedance and reference the NXP hardware design guide for the MAPBGA escape. Decoupling requires 100 nF capacitors near each VDDCORE pin and bulk capacitance on the DC-DC output.
This page synthesizes distributor pricing from Rochester Electronics, NXP EOL notice status, drop-in same-package alternatives within the i.MX 6UL family, and practical design notes not collated in the manufacturer datasheet.
드롭인 대체품: MCIMX6G2DVM05AA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCIMX6G2DVM05AA (동일 폼 팩터 및 풋프린트) — 차이점: Package, Core Architecture, L2 Cache, USB, ADC.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCIMX6G3DVM05AA
✅ 드롭인✓ 재고 있음
$9.78 / 개
데이터시트 보기 →MCIMX6G2DVK05AA
✅ 드롭인✓ 재고 있음
$8.1 / 개
데이터시트 보기 →MCIMX6G2CVM05AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6G3DVK05AA
✅ 드롭인✓ 재고 있음
$8.9 / 개
데이터시트 보기 →MCIMX6G3CVM05AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6G2DVM05AA 최대 정격 & 전기적 특성
| Family | i.MX 6UltraLite (i.MX6UL) |
| Core Processor | ARM Cortex-A7 |
| Number of Cores | 1 |
| Core Architecture | 32-bit |
| Maximum Core Frequency | 528 MHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | Not applicable (single-core A7) |
| NEON SIMD Engine | Yes |
| 동작 온도 범위 | -40C to +105C (Industrial) |
| 패키지 | 289-MAPBGA (14x14 mm) |
| 실장 유형 | Surface Mount |
| MSL 레벨 | 3 (168 hours) |
| Memory Interface | 16-bit LPDDR2/DDR3/DDR3L up to 400 MHz |
| LCD Controller | Yes, up to WXGA |
| Ethernet | Dual 10/100 Mbps with IEEE 1588 |
| USB | 2x USB 2.0 OTG with integrated PHY |
| CAN | 2x CAN-FD |
| ADC | 12-bit, multi-channel |
| RoHS 상태 | Compliant (per NXP product page) |
MCIMX6G2DVM05AA 289-mapbga (14x14 mm) 핀 구성 가이드
MCIMX6G2DVM05AA(289-mapbga (14x14 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCIMX6G2DVM05AA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCIMX6G2DVM05AA 적합 용도: 6 애플리케이션s: Industrial IoT Gateway, Building Automation Controller, Human-Machine Interface (HMI) Panel, Point-of-Sale (POS) Terminal, Smart Energy Meter, Portable Medical Device.
Industrial IoT Gateway
The MCIMX6G2DVM05AA fits industrial IoT gateway designs because its single Cortex-A7 core at 528 MHz runs full Linux with sufficient headroom for protocol stacks (MQTT, OPC-UA, Modbus) while consuming under 500 mW typical. The dual 10/100 Ethernet ports with IEEE 1588 hardware timestamping support daisy-chained industrial networks requiring deterministic latency. The -40C to +105C industrial temperature grade ensures reliable operation in factory floor enclosures without active cooling. Place the SoC on a 6-layer PCB with matched 50 ohm DDR3 traces and 100 nF decoupling per VDDCORE pin per NXP hardware design guide. Unlike higher-tier i.MX 6 dual/quad parts, the single-core A7 minimizes power budget while delivering application-class compute for edge analytics.
추천
Building Automation Controller
Building automation controllers benefit from the MCIMX6G2DVM05AA's industrial temperature range and dual CAN-FD interfaces for BACnet, KNX, or proprietary HVAC fieldbus networks. The integrated LCD controller drives WXGA touch panels for wall-mounted thermostats and access control terminals without an external graphics controller. The 528 MHz Cortex-A7 runs Yocto Linux with Qt or LVGL frameworks for responsive user interfaces. Hardware cryptography and secure boot (HAB) protect OTA update credentials and prevent unauthorized firmware loading. Decoupling requires 100 nF X7R capacitors at each VDDCORE pin plus 22 uF bulk on the DC-DC output rail.
추천
Human-Machine Interface (HMI) Panel
HMI panels using the MCIMX6G2DVM05AA leverage its integrated LCD controller supporting up to WXGA resolution with parallel RGB and LVDS interfaces, eliminating the need for a separate graphics processor. The 528 MHz Cortex-A7 with NEON drives Qt 5/6, LVGL, or WebKit-based GUIs at 30+ fps for responsive touch interaction. The industrial -40C to +105C operating range supports outdoor and factory floor installations. Unlike the higher-cost i.MX 6Dual/6Quad variants, the single-core A7 keeps BOM cost low while delivering sufficient rendering throughput for typical industrial operator interfaces. PCB stackup requires impedance-controlled LVDS pairs with length matching within 150 mils.
추천
Point-of-Sale (POS) Terminal
POS terminals use the MCIMX6G2DVM05AA for cost-effective Linux-based transaction processing with rich peripheral integration. The dual USB 2.0 ports with integrated PHY connect barcode scanners, receipt printers, and customer displays without external hub chips. The integrated LCD controller drives main operator displays while software-controlled GPIO handles keypad and cash drawer interfaces. The Cortex-A7 NEON engine accelerates encryption libraries (OpenSSL, mbedTLS) for PCI-compliant card data handling. According to NXP datasheet IMX6ULIEC, hardware secure boot prevents unauthorized firmware execution required for payment terminal certifications. Industrial temperature grade supports kitchen and outdoor kiosk deployments.
추천
Smart Energy Meter
Smart electricity, water, and gas meters benefit from the MCIMX6G2DVM05AA's industrial temperature range and dual 10/100 Ethernet for AMI (Advanced Metering Infrastructure) connectivity. The 12-bit ADC with multi-channel input directly samples current and voltage sensors for revenue-grade metering accuracy. Hardware secure boot and cryptographic acceleration protect meter credentials and prevent tampering attempts. The Cortex-A7 at 528 MHz runs metering protocol stacks (DLMS/COSEM, ANSI C12.19) with sub-second response times. Compared to dedicated metering ASICs, this MPU provides flexibility for evolving communication standards (LoRaWAN, NB-IoT bridge, cellular). The MAPBGA package allows compact meter enclosures under 150x100 mm.
추천
Portable Medical Device
Portable medical devices such as patient monitors, infusion pumps, and diagnostic analyzers use the MCIMX6G2DVM05AA for battery-efficient Linux-based data acquisition and display. The 528 MHz Cortex-A7 with NEON accelerates signal processing algorithms (FFT, filtering) for ECG, SpO2, and other physiological measurements. Hardware secure boot satisfies FDA cybersecurity guidance for medical device firmware integrity. The integrated LCD controller drives color TFT touchscreens for bedside patient interfaces. Compared to Cortex-M based designs, the A7 application processor simplifies FDA 510(k) submissions through use of validated Linux BSPs. Power management integrates DC-DC controller supporting direct Li-ion battery operation.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCIMX6G2DVM05AA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCIMX6G3DVM05AA | MCIMX6G2DVK05AA | MCIMX6G2CVM05AA | MCIMX6G3DVK05AA |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 289-MAPBGA (14x14 mm) | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same |
| Core | ARM Cortex-A7 1 core | ARM Cortex-A7 1 core | ARM Cortex-A7 1 core | ARM Cortex-A7 1 core | ARM Cortex-A7 1 core |
| Max Core Frequency | 528 MHz | 528 MHz | 528 MHz | 528 MHz | 528 MHz |
| Operating Temperature | -40C to +105C (Industrial) | -40C to +105C (Industrial) | -40C to +105C (Industrial) | 0C to +85C (Commercial) | -40C to +105C (Industrial) |
| Enhanced Security (HAB v4, Tamper Pins) | No (standard G2) | Yes (G3) | No | No | Yes (G3) |
| Silicon Revision | M (base revision) | M | K (minor revision) | M | K |
| Lifecycle Status | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy | Last Time Buy |
주요 차별점
- Industrial -40C to +105C temperature grade with standard G2 security features (vs MCIMX6G2CVM05AA)
- Standard security configuration without enhanced tamper detection (vs MCIMX6G3DVM05AA)
- M (base) silicon revision with documented errata coverage (vs MCIMX6G2DVK05AA)
설계 노트
The 289-MAPBGA 0.8 mm pitch package requires 6-layer PCB stackup with 50 ohm controlled impedance for DDR3, LVDS, and Ethernet differential pairs. Reference NXP i.MX 6UL Hardware Design Guide (HDR11415) for exact stackup recommendations. DDR3 traces must be length-matched within 50 mils for the byte lanes and 100 mils between bytes. Route all signals on inner layers with continuous ground reference planes to maintain impedance and minimize crosstalk.
The integrated DC-DC controller requires an external inductor (typically 1.0 uH) and output capacitors (22 uF X5R) on the DCDC_IN and DCDC_OUT pins. Place a 100 nF X7R decoupling capacitor within 5 mm of each VDDCORE pin. Add bulk capacitance of at least 47 uF on the VDD_SOC rail. Power-on reset requires the POR pin held low for at least 1 ms after all rails stabilize. Use the NXP PF0100 PMIC or discrete LDO chain for auxiliary rail sequencing.
The 289-MAPBGA package thermal resistance theta_JA is approximately 25 C/W with proper thermal via array under the exposed die pad. Implement a 6x6 thermal via array (0.3 mm drill, 0.5 mm pitch) under the center balls connected to inner ground plane. At 528 MHz full load with peripheral activity, junction-to-ambient rise is approximately 12-15 C/W above ambient in still air. For industrial -40C to +105C operation, ensure ambient does not exceed 90 C at full CPU utilization.
Do not confuse the MCIMX6G2 (G2, standard security) with MCIMX6G3 (G3, enhanced security) when designing for tamper detection or secure RTC applications. The G3 variants have additional tamper pins and a hardware cryptographic accelerator absent on G2. For Last Time Buy migration planning, the recommended production successor is the i.MX 6ULZ family (smaller 272-MAPBGA, lower power) or i.MX RT1060/1064 (Cortex-M7, no Linux required). Boot configuration strapping pins must be pulled correctly to select the boot source (SD, eMMC, QSPI, NOR).
Differential pairs for Ethernet (RGMII to external PHY) and LVDS display output require 100 ohm differential impedance with intra-pair length matching within 5 mils. Crystal oscillator traces (32.768 kHz RTC and 24 MHz system) must be routed over a continuous ground plane with no signal crossings and minimum trace length. The USB D+/D- traces require 90 ohm differential impedance per USB 2.0 specification with matching to within 150 pS. ESD protection diodes (TPD4E05U06 or similar) must be placed within 3 mm of the USB connector.
규정 준수 정보
RoHS and REACH compliance per NXP product page. MSL Level 3 (168 hours floor life) per Rochester Electronics listing. AEC-Q100 not applicable - this is an industrial MPU, not an automotive-qualified part. For automotive applications, consider the i.MX 6UL automotive-grade variants with different part numbers.
