MCIMX6Y0CV05AA - i.MX 6ULL ARM Cortex-A7 MPU 528MHz | NXP
부품 번호: MCIMX6Y0CV05AA ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.85 | $9.85 |
| 10 | $8.78 | $87.80 |
| 100 | $7.65 | $765.00 |
| 500 | $6.55 | $3,275.00 |
| 1,000 | $5.4 | $5,400.00 |
MCIMX6Y0CV05AA 개요
An applications processor (AP) is a system-on-chip (SoC) class microprocessor built around one or more high-performance CPU cores, tightly integrated with on-chip memory controllers, graphics/video accelerators (when present), and a wide peripheral set. The i.MX 6ULL sits at the low-power, low-cost end of the i.MX 6 hierarchy (i.MX 6ULL -> i.MX 6 -> applications processor -> microprocessor -> MPU -> semiconductor), giving designers Cortex-A7 performance at Cortex-M-class system cost and power. The 528 MHz Cortex-A7 core supports the ARMv7-A instruction set including NEON, providing ample headroom for Linux (with the appropriate commercial-grade silicon revision) and resource-constrained RTOS deployments.
Key features of the MCIMX6Y0CV05AA include a 32-bit LPDDR2/DDR3/LPDDR3 memory controller, 8-channel 12-bit ADC (for industrial sensing), dual 10/100 Mbit Ethernet MACs with hardware QoS, dual USB 2.0 OTG controllers, multiple UART/SPI/I2C/CAN interfaces, and an integrated LCD controller supporting up to WXGA resolution. The 'CV05' ordering code identifies the commercial temperature grade (0C to +95C junction) with specific peripheral and security configuration, while the 'AA' suffix denotes the standard feature set (versus secure-boot or specialised revisions). Hardware-virtualization, TrustZone, and tamper-monitoring features vary by sibling part numbers in the family.
Architecturally, the Cortex-A7 core is paired with an ARM Cortex-M4 (in some 6ULL variants) or used stand-alone for power-optimised Linux. The chip is fabricated in a low-power process and supports dynamic voltage and frequency scaling (DVFS) with multiple power domains, enabling deep-sleep currents in the single-digit milliamp range - ideal for battery-backed IoT devices.
Typical applications include IoT edge gateways, smart-home appliances, industrial HMI panels, point-of-sale terminals, healthcare monitoring devices, energy/building automation controllers, and connected printers. The on-chip LCD controller makes it particularly well suited to WXGA-resolution colour touch panels without an external GPU. When designing with this device, pay close attention to PCB power-tree design: the i.MX 6ULL needs multiple rails (VDD_SOC, VDD_ARM, VDD_DRAM, etc.) with strict sequencing, and the 289-ball MAPBGA package requires microvia or via-in-pad PCB technology for reliable assembly.
드롭인 대체품: MCIMX6Y0CV05AA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCIMX6Y0CV05AA (동일 폼 팩터 및 풋프린트) — 차이점: ADC, Core Architecture, Ethernet, Mounting Type, Package.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCIMX6Y0CVM05AA
✅ 드롭인✓ 재고 있음
$9.95 / 개
데이터시트 보기 →MCIMX6Y1CV05AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Y2CVM08AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Y0CVM05AB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Y0DVM05AA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCIMX6Y0CV05AA 최대 정격 & 전기적 특성
| Product Family | i.MX 6ULL |
| Core Architecture | ARM Cortex-A7 (32-bit) |
| Maximum CPU Frequency | 528 MHz |
| Number of Cores | 1 |
| Instruction Set | ARMv7-A (with NEON) |
| 패키지 | 289-MAPBGA (14x14 mm, 0.8 mm pitch) |
| Ordering Suffix Decoding | CV05 = commercial grade, speed grade V05 (528 MHz); AA = standard feature set |
| Memory Controller | LPDDR2 / DDR3 / LPDDR3 (16-bit) |
| Display Controller | Integrated LCD controller, up to WXGA resolution |
| Ethernet | 2x 10/100 Mbit MAC with hardware QoS |
| USB | 2x USB 2.0 OTG |
| ADC | 8-channel, 12-bit SAR |
| 동작 접합 온도 | 0C to +95C (commercial grade) |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Compliant |
MCIMX6Y0CV05AA 289-mapbga (14x14 mm, 0.8 mm pitch) 핀 구성 가이드
MCIMX6Y0CV05AA(289-mapbga (14x14 mm, 0.8 mm pitch) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCIMX6Y0CV05AA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCIMX6Y0CV05AA 적합 용도: 6 애플리케이션s: IoT Edge Gateway, Smart Home Appliance HMI, Industrial HMI Panel, Point-of-Sale Terminal, Healthcare Monitoring Device, Connected Printer / Scanner MFP.
IoT Edge Gateway
The MCIMX6Y0CV05AA is well matched to compact IoT edge gateways that aggregate sensor data and forward it to cloud platforms over Ethernet or Wi-Fi. Its single ARM Cortex-A7 at 528 MHz runs a minimal Linux distribution (Yocto or Buildroot) comfortably, while the dual 10/100 Mbit Ethernet MACs with hardware QoS allow simultaneous WAN and LAN connectivity without an external switch. The chip's sub-watt deep-sleep currents (single-digit mA) and 0.8 mm-pitch MAPBGA package fit small-form-factor fanless enclosures, and the integrated LCD controller enables a local status display.
추천
Smart Home Appliance HMI
Consumer appliances such as connected washing machines, ovens, and refrigerators benefit from the i.MX 6ULL's integrated WXGA LCD controller combined with its low BOM cost. The MCIMX6Y0CV05AA drives a colour touch panel directly without an external GPU, and the 8-channel 12-bit ADC reads multiple temperature, humidity, and motor-current sensors concurrently. Power consumption below 1 W typical enables battery-backed clock and Wi-Fi-resume features, while the 289-MAPBGA's 14x14 mm footprint fits behind a 5-inch display module with a single-layer flex connection.
추천
Industrial HMI Panel
For industrial human-machine interface (HMI) panels from 4.3-inch to 7-inch, the MCIMX6Y0CV05AA provides Cortex-A7 performance, a built-in LCD controller, and dual CAN interfaces for fieldbus integration. The commercial 0-95C junction temperature grade is adequate for indoor control cabinets, and the same 289-MAPBGA accepts the industrial-grade MCIMX6Y0CVM05AA drop-in for outdoor or factory-floor panels. The on-chip LCD controller supports 24-bit RGB output up to WXGA, eliminating the need for an external display bridge IC and reducing BOM cost.
추천
Point-of-Sale Terminal
Compact point-of-sale (POS) terminals pair the MCIMX6Y0CV05AA with the higher-security i.MX 6UL (MCIMX6Y1CV05AA) when payment-card processing is required, or use the standard 6ULL variant for non-payment terminals. The 528 MHz Cortex-A7 handles barcode scanning, receipt printing, and a small touch UI without thermal constraints, and the dual USB 2.0 OTG ports support a printer and a PIN pad simultaneously. The integrated Ethernet MAC enables IP-based back-office connectivity without an external PHY chip beyond the standard MII/RMII transceiver.
추천
Healthcare Monitoring Device
Connected patient monitors, infusion pumps, and portable diagnostic devices use the MCIMX6Y0CV05AA as a low-power Linux host that aggregates data from medical peripherals over USB, SPI, and I2C. The 12-bit ADC with 8 channels reads multiple analog sensor signals simultaneously, while the LCD controller drives a clinical-grade display. For designs that must meet IEC 60601-1 isolation and higher temperature grades, the industrial-temp MCIMX6Y0CVM05AA is a drop-in replacement in the same 289-MAPBGA package, allowing one PCB layout to serve both consumer-health and clinical-product variants.
추천
Connected Printer / Scanner MFP
Office multi-function printers (MFP) use the MCIMX6Y0CV05AA to host a small embedded Linux system that drives the scanner, formatter, and network interfaces. The dual 10/100 Ethernet MACs with QoS allow separate 'office' and 'service' networks without an external switch, while the LCD controller drives the operator panel directly. The 528 MHz Cortex-A7 sustains the page-rendering pipeline for typical office print speeds, and the same 289-MAPBGA package is shared across the i.MX 6ULL family for scalable BOM sourcing.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCIMX6Y0CV05AA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCIMX6Y0CVM05AA | MCIMX6Y1CV05AA | MCIMX6Y2CVM08AA | MCIMX6Y0CVM05AB | MCIMX6Y0DVM05AA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 289-MAPBGA (14x14 mm) | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same | 289-MAPBGA (14x14 mm) - same |
| CPU Core | Cortex-A7 @ 528 MHz | Cortex-A7 @ 528 MHz | Cortex-A7 @ 528 MHz | Cortex-A7 @ 528 MHz | Cortex-A7 @ 528 MHz | Cortex-A7 @ 528 MHz |
| Temperature Grade | Commercial 0C to +95C | Industrial -40C to +105C | Commercial 0C to +95C | Industrial -40C to +105C | Industrial -40C to +105C | Industrial -40C to +105C |
| Hardware Crypto (CAAM) | No (standard 6ULL) | No | Yes (i.MX 6UL with CAAM) | Yes (full security suite) | No | No (display variant) |
| LCD Controller | Yes (integrated) | Yes | Yes | Yes | Yes | Yes (enhanced) |
| USB 2.0 OTG Ports | 2 | 2 | 2 | 2 | 2 | 2 |
| Ethernet MACs | 2x 10/100 with QoS | 2x 10/100 with QoS | 2x 10/100 with QoS | 2x 10/100 with QoS | 2x 10/100 with QoS | 2x 10/100 with QoS |
주요 차별점
- Lowest-cost commercial grade in the i.MX 6ULL family (vs MCIMX6Y0CVM05AA)
- Standard feature set (no security overhead) for non-payment appliances (vs MCIMX6Y1CV05AA)
- NXP mainline Linux BSP support with long-term availability (vs Cross-brand Microchip SAMA5D2)
설계 노트
The MCIMX6Y0CV05AA requires multiple separate power rails (VDD_SOC, VDD_ARM, VDD_DRAM, VDD_HIGH, VDD_SNVS, and NVCC_* for I/O banks) with strict power-up sequencing as defined in the i.MX 6ULL reference manual. A dedicated PMIC such as the NXP PF3000 / PF3001 is strongly recommended to manage sequencing and voltage scaling; attempting to power the part from discrete LDOs without sequencing risks latch-up or undefined boot behaviour. Allow at least 100 ms between VDD_SNVS and VDD_HIGH to ensure proper boot ROM hand-off.
The 289-MAPBGA package has a 0.8 mm ball pitch, which requires HDI PCB technology with microvias, or via-in-pad construction for reliable assembly. Estimated: for a 4-layer board with 1 oz copper, allocate at least 4 ground balls directly under the die shadow to the inner ground plane for thermal dissipation. The package thermal resistance (JEDSA spec) is approximately 20-25 C/W theta_JB with proper via stitching; design the PCB with a continuous inner ground plane under the BGA to meet commercial 0-95C junction temperature under typical 1 W load.
A common pitfall with the MCIMX6Y0CV05AA is failing to configure the boot mode pins (BOOT_MODE0/1) correctly before POR - an incorrect setting leaves the chip unbootable without JTAG intervention. Another frequent mistake is using the wrong DRAM interface configuration: the LPDDR2/DDR3 mode pins (DDR_TYPE) must match the actual memory type populated, otherwise memory training fails silently. Always validate boot from SD card before attempting eMMC boot, and use NXP's Manufacturing Tool to recover a bricked device.
규정 준수 정보
RoHS and REACH compliance per NXP product page. The MCIMX6Y0CV05AA is not AEC-Q100 qualified - it is a commercial-grade microprocessor intended for consumer and industrial (with appropriate temperature-grade MPN) applications, not automotive.