Microchip Technology

MCP3901A0-E/ML - 24-Bit Dual-Channel AFE | Microchip

부품 번호: MCP3901A0-E/ML ✓ 활성
5 V Vdss 20-QFN (4 x 4 mm) with exposed pad Package
MOQ: 1 |

MCP3901A0-E/ML 개요

Microchip Technology MCP3901A0-E/ML is a two-channel analog front end with 16/24-bit delta-sigma analog-to-digital converters, programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and a 20 MHz SPI-compatible serial interface. The device is offered in a 20-pin 4 x 4 mm QFN package with an exposed pad and reaches up to 91 dB SINAD according to the manufacturer product page.

An analog front end is an integrated circuit that converts one or more analog sensor signals into digital measurements. Within the signal-chain hierarchy, the MCP3901A0-E/ML belongs to the AFE and data-converter class, combining input conditioning, conversion, reference generation, and digital communication in one package. Its dual-channel architecture is intended for systems that need accurate measurement from two related analog inputs without requiring two independent converter assemblies.

The principal features include two synchronous-sampling delta-sigma ADCs, two internal PGAs, an internal voltage reference, programmable phase-delay compensation, and SPI-compatible communication. The manufacturer describes the converters as supporting 16-bit or 24-bit resolution and using proprietary dithering to reduce idle tones and improve total harmonic distortion. Exact gain settings, input ranges, noise figures, timing limits, and accuracy over temperature should be selected from the manufacturer datasheet and its operating-condition tables.

The MCP3901 architecture is suited to precision industrial measurement, battery-powered sensing, process-control instrumentation, and low-bandwidth sensor acquisition. Synchronous delta-sigma conversion is advantageous where low noise and high resolution matter more than very high conversion speed. Phase-delay compensation can simplify synchronization of the two channels, while the internal reference reduces the number of external precision components required for ratiometric or internally referenced measurements.

For a practical implementation, place the analog inputs close to their associated pins, keep the input network compact, and route the SPI signals away from noisy switching nodes. The exposed thermal pad should connect to the ground plane with multiple short vias and adequate copper area. Decoupling capacitors should be placed directly at the supply pins in accordance with the manufacturer’s recommended application circuit.

This page combines the manufacturer’s device description with package, ordering, sourcing, and application guidance. It also identifies documented family alternatives and highlights the distinction between a true pin-compatible replacement and a related MCP3901 configuration. Final design validation should use the exact Microchip datasheet for electrical limits, pin definitions, timing, filtering, and recommended external circuitry.

드롭인 대체품: MCP3901A0-E/ML — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MCP3901A0-E/ML (동일 폼 팩터 및 풋프린트) — 차이점: Package, Phase-Delay Compensation, Mounting Type, Programmable Gain Amplifiers, ADC Architecture.

Microchip Technology
Package: 20-pin SSOP, 0.209 mm pitch, 5.30 mm width
Phase-Delay Compensation: Internal phase-delay compensation block
Mounting Type: Surface mount
Microchip Technology
Package: 20-pin SSOP
Phase-Delay Compensation: Yes
Mounting Type: Surface mount

MCP3901A0-E/SS

✅ 드롭인
Microchip Technology
📦 20-QFN (4 x 4 mm)
Delta-sigma · 2 channels · 16-bit or 24-bit selectable · 64 kSPS · Synchronous dual-channel sampling · Up to 91 dB SINAD · -104 dBc · 2 integrated PGAs

가격 문의

데이터시트 보기 →

MCP3901A0-I/SS

✅ 드롭인
Microchip Technology
📦 20-QFN (4 x 4 mm)
Dual-channel analog front end · 2 channels · Synchronous sampling delta-sigma ADC · 16-bit or 24-bit · 64 kSPS · 2 internal PGAs · Up to 91 dB · -104 dBc up to the 35th harmonic

가격 문의

데이터시트 보기 →

MCP3901A0T-E/ML

✅ 드롭인
📦 20-QFN (4 x 4 mm)
Uses the ML package suffix while adding a T ordering segment that may encode a configuration difference

📋 참조 대체품 (카탈로그에 없음)

MCP3901A0-E/ML 최대 정격 & 전기적 특성

Product Type Dual-channel analog front end (AFE)
Converter Architecture Delta-sigma ADC
Number of Channels 2 channels
ADC Resolution 16/24 bits
Maximum SINAD 91 dB
Programmable Gain Amplifiers 2 internal PGAs
Internal Reference 1 internal voltage reference
Phase-Delay Compensation Programmable phase-delay compensation
Serial Interface SPI-compatible, 20 MHz maximum clock
Analog Supply Voltage 5 V
Digital Supply Voltage 2.7 V to 5.5 V
Input Signal Type Synchronous-sampling differential analog input
패키지 20-QFN (4 x 4 mm) with exposed pad
실장 유형 Surface-mount SMD
Dithering Proprietary dithering for reduced idle tones and improved THD

MCP3901A0-E/ML 20-qfn (4 x 4 mm) with exposed pad 핀 구성 가이드

MCP3901A0-E/ML(20-qfn (4 x 4 mm) with exposed pad 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MCP3901A0-E/ML의 20-qfn (4 x 4 mm) with exposed pad 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MCP3901A0-E/ML.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MCP3901A0-E/ML 적합 용도: 6 애플리케이션s: Industrial Pressure and Process Sensing, Battery-Powered Environmental Monitoring, Precision Instrumentation and Data Acquisition, Load Cell and Bridge Sensor Measurement, Power and Energy Monitoring, Condition Monitoring and Vibration Sensors.

🏭

Industrial Pressure and Process Sensing

The MCP3901A0-E/ML fits dual-channel industrial measurement systems that convert low-level sensor outputs into high-resolution digital data. Its two synchronous-sampling delta-sigma converters, internal PGAs, and internal voltage reference reduce the amount of external analog circuitry required around pressure, position, or process-control sensors. The 24-bit operating mode can be used where fine resolution is more important than very high conversion throughput, while the SPI-compatible interface allows the host controller to retrieve both channel results. Designers should confirm the required input range and gain combination in the manufacturer datasheet, maintain a quiet analog supply, and place input and decoupling networks close to the device to minimize pickup from adjacent switching circuitry.

🧩

Battery-Powered Environmental Monitoring

The MCP3901A0-E/ML is appropriate for battery-powered environmental monitoring nodes that measure two low-bandwidth analog quantities, such as a gas sensor output and a temperature-derived signal. Its 16/24-bit delta-sigma architecture emphasizes resolution rather than high-rate sampling, which suits sensors that change slowly and can operate between scheduled measurements. The internal reference and PGAs simplify the analog front end, while the SPI-compatible digital interface supports connection to a low-power embedded controller. To maximize usable dynamic range, select the appropriate PGA range and digital filter settings, confirm the current consumption for the selected operating mode, and isolate the analog input routing from fast-edge digital and wireless signals.

🔧

Precision Instrumentation and Data Acquisition

The MCP3901A0-E/ML can serve as the measurement core of laboratory and industrial instrumentation requiring two correlated analog channels. Synchronous delta-sigma conversion, phase-delay compensation, and up to 91 dB SINAD provide a foundation for accurate low-frequency measurements, while the internal reference and dual PGAs help establish repeatable signal scaling. The 20 MHz SPI-compatible interface allows straightforward connection to a control processor or data-acquisition controller. For highest system accuracy, account for reference, gain, and offset error in calibration, use a stable low-noise supply, follow the datasheet grounding arrangement, and verify settling time before the selected data rate.

⚖️

Load Cell and Bridge Sensor Measurement

The MCP3901A0-E/ML is suitable for bridge-based sensing systems where small differential signals must be measured with high resolution and consistent scaling. The dual-channel architecture can support a measurement channel and an auxiliary channel, while the internal PGA simplifies conditioning of millivolt-level bridge outputs. Delta-sigma conversion is particularly useful when the desired bandwidth is relatively narrow and rejection of low-frequency disturbance is important. The design should use shielded or guarded routing for sensitive bridge nodes, provide clean reference and supply connections, and follow the manufacturer’s input-filter recommendations. Calibration should be performed across the intended temperature and mechanical-load range because sensor drift and parasitic effects can dominate the converter’s intrinsic resolution.

⚡

Power and Energy Monitoring

The MCP3901A0-E/ML can support power-monitoring modules that measure a scaled voltage and current channel using the device’s dual-channel converter architecture. The internal PGA and reference simplify the analog signal path, while 16/24-bit conversion provides sufficient numerical resolution for supervisory, energy-metering, or protection functions. Delta-sigma conversion is appropriate when the monitored quantities have limited bandwidth and continuous high-rate sampling is unnecessary. Designers should keep current-shunt and voltage-divider networks close to the analog inputs, minimize copper resistance in the measurement path, and use filtering that balances response time against noise. Production calibration should compensate for shunt tolerance, reference accuracy, gain error, and channel offset.

🏗️

Condition Monitoring and Vibration Sensors

The MCP3901A0-E/ML can acquire signals from piezoelectric, accelerometer, or resistive vibration sensors when the target bandwidth is compatible with delta-sigma conversion. Two channels allow related motion or vibration measurements to be captured for comparison, and phase-delay compensation can assist with channel alignment. The device’s selectable resolution and filter behavior should be matched to the mechanical signal bandwidth; using unnecessary resolution or an overly long filter can add latency and reduce responsiveness. Keep sensor return paths short, use suitable grounding and shielding, and separate analog input routing from clocks, DC-DC converters, and motor-drive stages. Validate aliasing, noise bandwidth, and transient response with the complete sensor and mechanical structure rather than only the bare AFE.

What is the MCP3901A0-E/ML?
The MCP3901A0-E/ML is a Microchip Technology dual-channel analog front end with 16/24-bit delta-sigma ADCs, two internal programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and an SPI-compatible interface. According to the manufacturer product page, the converter architecture can achieve up to 91 dB SINAD. The device is intended for precision measurement of two analog channels in industrial, instrumentation, and sensor-acquisition systems.
Where can I download the MCP3901A0-E/ML datasheet PDF?
The official MCP3901A0-E/ML datasheet PDF is available from Microchip at the DeviceDoc 22192d link listed on this page. The document describes the two synchronous-sampling delta-sigma converters, internal PGAs, voltage reference, phase-delay compensation, SPI interface, and application circuitry. Use the manufacturer document for authoritative pin definitions, electrical limits, timing, filtering, and recommended decoupling values.
Where can I find the MCP3901A0-E/ML pinout?
The MCP3901A0-E/ML pinout is documented in the pin-description section of the Microchip DeviceDoc 22192d datasheet. The component uses a 20-QFN package with an exposed pad, so the exposed thermal pad and its electrical connection must be checked against the package drawing before PCB routing. Use the pin-description table when assigning analog inputs, supplies, ground connections, and SPI signals.
How many channels and bits does the MCP3901A0-E/ML support?
The MCP3901A0-E/ML supports two analog channels and 16-bit or 24-bit delta-sigma conversion. Microchip describes the device as a dual-channel analog front end containing two synchronous-sampling converters and two corresponding PGAs. The 24-bit operating mode is intended for higher-resolution measurements, while the manufacturer documentation defines the associated performance and conversion timing for each configuration.
What are the key specifications engineers should know about MCP3901A0-E/ML?
The MCP3901A0-E/ML combines two 16/24-bit delta-sigma ADCs, two internal PGAs, an internal voltage reference, phase-delay compensation, and a 20 MHz SPI-compatible interface in a 20-QFN package. The manufacturer product page identifies performance up to 91 dB SINAD. The documented supply arrangement includes a 5 V analog supply and a 2.7 V to 5.5 V digital supply, subject to the detailed operating conditions in the datasheet.
Can MCP3901A0-E/ML be used for industrial sensor measurement?
Yes, the MCP3901A0-E/ML is suitable for industrial sensor measurement when the application prioritizes resolution, low-noise conversion, and synchronized dual-channel acquisition over very high sample rates. Its internal reference and PGAs reduce external analog conditioning, while phase-delay compensation supports coordinated measurements. Industrial suitability should also be checked against the required temperature range, safety qualification, and EMC requirements.
MCP3901A0-E/ML vs MCP3901A0-E/SS: which is the better replacement?
Both are members of the MCP3901 family, but the order-code suffix must be checked against the PCB package before either part is treated as a replacement. The MCP3901A0-E/ML is identified with a 20-QFN 4 x 4 mm package, while MCP3901A0-E/SS is a separately ordered family configuration. Confirm the package drawing, pin map, temperature grade, and reel requirements in the manufacturer ordering information before substituting one for the other.
MCP3901A0-E/ML vs MCP3901A0T-E/ML: which is preferable?
The two orderable MCP3901 configurations differ in their part-number coding, so the suffix must be decoded before comparing them as drop-in devices. MCP3901A0T-E/ML is listed in a comparison result for the MCP3901 family, but the search record does not expose the complete ordering-code meaning. Confirm the exact gain, accuracy, temperature, and tape-and-reel attributes in Microchip’s ordering table rather than assuming that the “T” segment is interchangeable.
When should I choose MCP3901A0-E/ML over another MCP3901 configuration?
Choose MCP3901A0-E/ML when the design requires the documented 20-QFN 4 x 4 mm implementation and the associated ordering-code attributes match the system. The part is appropriate for dual-channel precision acquisition with internal PGAs, an internal reference, and SPI readout. If the PCB uses another package or if production requirements differ in temperature grade, gain range, or packing, select the exact MCP3901 order code that matches those constraints.
What can replace the MCP3901A0-E/ML on the same PCB?
The closest documented replacement candidates are MCP3901A0-E/SS, MCP3901A0-I/SS, and MCP3901A0T-E/ML, all from the MCP3901 family. A valid drop-in decision requires identical package geometry, pin assignment, electrical limits, gain configuration, temperature range, and ordering attributes. Because the cross-reference records do not provide a complete pin-by-pin comparison, validate the candidate against the manufacturer datasheet and package drawing before production substitution.
Is MCP3901A0-E/ML the same as MCP3901A0T-E/ML?
No conclusion of equivalence should be based on the shared MCP3901A0-E/ML family name alone. MCP3901A0T-E/ML is a distinct Microchip order code, and its inserted “T” may encode an option that must be understood from the official ordering information. Confirm pinout, package, gain configuration, accuracy, and temperature coverage before treating it as a drop-in replacement.
What is the best Microchip equivalent for MCP3901A0-E/ML?
MCP3901A0-E/SS is the closest documented Microchip-family equivalent candidate because it shares the MCP3901A0-E base ordering code, while MCP3901A0-I/SS and MCP3901A0T-E/ML provide additional family options. “Closest” does not automatically mean drop-in compatible: the suffix may change package or configuration. Compare the package drawings and full ordering tables before committing to a replacement.
Where can I buy MCP3901A0-E/ML online?
Use the Request a Quote form on this page to request MCP3901A0-E/ML availability, unit pricing, and quantity support for your project. The form is the appropriate commercial channel for current stock, lead time, MOQ, and shipment quantities because these conditions can change by region and order volume. The target is also listed by multiple authorized catalog channels, but buyers should verify the exact suffix and order quantity.
What is the price of MCP3901A0-E/ML?
Current commercial pricing for MCP3901A0-E/ML should be requested through the Request a Quote form on this page. The structured pricing area reflects only qualifying quantity-break listings for the exact MCP3901A0-E/ML order code, while the displayed last-known unit price serves as a historical reference. Volume, package, delivery location, and production quantities can affect a current quotation.
Is MCP3901A0-E/ML in stock, and what is its lead time?
Use the Request a Quote form on this page to confirm current MCP3901A0-E/ML stock, scheduled lead time, and minimum order quantity. Distributor catalog presence does not guarantee a specific quantity is available for every package, reel format, or delivery region. The manufacturer lifecycle listing should be used to determine whether the exact order code remains active for new designs and production procurement.

엔지니어링 참조 데이터: MCP3901A0-E/ML — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MCP3901A0-E/ML when the design uses a 20-QFN 4 x 4 mm PCB footprint and requires a two-channel, 16/24-bit delta-sigma AFE with internal PGAs, an internal reference, phase-delay compensation, and SPI readout. It is well suited to precision industrial sensors, process measurement, bridge interfaces, and low-bandwidth monitoring where resolution is more important than high-rate conversion. MCP3901A0-E/SS is a useful family candidate when its decoded suffix matches the required package and configuration. Consider MCP3901A0-I/SS when its grade or ordering attributes fit the deployment, and MCP3901A0T-E/ML only after confirming the meaning of its T segment. None of these candidates should be approved as a drop-in replacement without a complete pin, electrical-limit, gain, temperature, and package comparison against the target datasheet.

대체품과의 비교

파라미터 이 제품 MCP3901A0-E/SS MCP3901A0-I/SS MCP3901A0T-E/ML
Package 20-QFN (4 x 4 mm) with exposed pad 20-QFN (4 x 4 mm) 20-QFN (4 x 4 mm) 20-QFN (4 x 4 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Type Dual-channel analog front end MCP3901 dual-channel analog front end MCP3901 dual-channel analog front end MCP3901 dual-channel analog front end
Number of Channels 2 channels 2 channels 2 channels 2 channels
ADC Resolution 16/24 bits 16/24 bits 16/24 bits 16/24 bits
Maximum SINAD 91 dB Up to 91 dB Up to 91 dB Up to 91 dB
Programmable Gain Amplifiers 2 internal PGAs 2 internal PGAs 2 internal PGAs 2 internal PGAs
Internal Voltage Reference Present Present Present Present
Digital Interface SPI-compatible, 20 MHz maximum SPI-compatible, 20 MHz maximum SPI-compatible, 20 MHz maximum SPI-compatible, 20 MHz maximum
Digital Supply Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Analog Supply Voltage 5 V 5 V 5 V 5 V

주요 차별점

  • Integrated dual-channel measurement chain (vs MCP3901A0-E/SS)
  • SPI-compatible interface supports a 20 MHz digital clock (vs MCP3901A0-I/SS)
  • Phase-delay compensation supports coordinated dual-channel acquisition (vs MCP3901A0T-E/ML)
  • Internal reference and dual PGAs reduce external analog overhead (vs MCP3901A0-E/SS)

설계 노트

Place the analog input network, reference components, and supply-decoupling capacitors close to their associated device pins. Keep the two analog channels symmetrical when phase relationship matters, and route SPI signals separately from sensitive inputs. The exposed pad should connect to the recommended ground plane using multiple short thermal vias, while the component’s pad geometry and paste pattern must follow the manufacturer’s 4 x 4 mm QFN land pattern.

The delta-sigma converter converts continuous analog input into filtered digital data, so usable system bandwidth depends on the selected output data rate, digital filter, PGA range, and settling time. Configure the filter and conversion mode before defining the application’s sampling interval. Validate full-scale headroom at the selected gain and include channel offset, gain error, reference error, and sensor nonlinearity in the calibration plan rather than relying only on nominal bit resolution.

Use separate, well-decoupled analog and digital supply paths as shown in the manufacturer’s recommended application circuit. The documented arrangement uses a 5 V analog supply and a 2.7 V to 5.5 V digital supply. Place the highest-value decoupling capacitor directly at the relevant supply pins and maintain short return paths to the ground plane. Confirm whether the selected MCP3901 configuration permits the intended supply combination and operating temperature.

Do not treat all MCP3901 order codes as interchangeable solely because they share the same AFE architecture. Decode the complete MPN, then verify package, pinout, gain configuration, temperature grade, and delivery format against the manufacturer ordering information. Also avoid driving the analog input beyond the selected PGA range, and wait for the converter’s documented settling interval before treating the first digital result as valid.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The exact-order-code compliance declarations were not established by the cited product and catalog records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status with Microchip for the selected MCP3901 order code.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MCP3901A0-E/ML datasheet MCP3901A0-E/ML datasheet pdf MCP3901A0-E/ML pinout MCP3901A0-E/ML specifications MCP3901A0-E/ML equivalent MCP3901A0-E/ML replacement MCP3901A0-E/ML cross reference MCP3901A0-E/ML price MCP3901A0-E/ML stock Microchip MCP3901A0-E/ML MCP3901A0-E/ML 24-bit AFE MCP3901A0-E/ML QFN-20 MCP3901A0-E/ML vs MCP3901A0-E/SS MCP3901A0-E/ML industrial sensor MCP3901A0-E/ML application circuit

관련 부품 & 용어

Microchip Technology MCP3901A0-E/ML MCP3901A0-E/SS MCP3901A0-I/SS MCP3901A0T-E/ML MCP3901 analog front end AFE delta-sigma ADC programmable-gain amplifier PGA internal voltage reference phase-delay compensation SPI-compatible serial interface 20-QFN QFN package family surface-mount SMD industrial sensor measurement process control bridge sensor power monitoring 24-bit resolution 91 dB SINAD proprietary dithering
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기