MCP606-I/P - 155kHz Micropower Op Amp | Microchip
부품 번호: MCP606-I/P ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
드롭인 대체품: MCP606-I/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCP606-I/P (동일 폼 팩터 및 풋프린트) — 차이점: Input Bias Current, Output Swing, Product Type, Typical Operating Current.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MCP606T-I/P
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCP606-I/OT
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCP606-I/ST
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCP606T-I/ST
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCP606T-I/SN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MCP606-I/P 최대 정격 & 전기적 특성
| Product Type | Single operational amplifier |
| Technology | Advanced CMOS |
| Number of Channels | 1 channel |
| Gain Bandwidth Product | 155 kHz |
| Typical Operating Current | 18.7 uA |
| Maximum Offset Voltage | 250 uV |
| Supply Voltage Range | 2.5 V to 6.0 V |
| Input Bias Current | 80 pA maximum at +85 C |
| Output Swing | Rail-to-rail |
| Unity-Gain Stability | Yes |
| 패키지 | 8-pin PDIP |
| Package Type | Through-hole PDIP |
MCP606-I/P through-hole pdip 핀 구성 가이드
MCP606-I/P(through-hole pdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP606-I/P.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP606-I/P 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Interface, Portable Measurement Front End, Low-Voltage Signal Buffer, Portable Instrumentation, Low-Voltage Control Signal Conditioning, Portable Analog Signal Conditioning.
Battery-Powered Sensor Interface
The MCP606-I/P fits battery-powered sensor interfaces because it operates from 2.5 V to 6.0 V and has a typical operating current of 18.7 uA. Its 155 kHz gain-bandwidth product is appropriate for slow sensor signals, while rail-to-rail output swing helps use the available supply range. Place the amplifier close to the sensor output and use the 8-pin PDIP package only when through-hole assembly is acceptable. Verify the sensor’s output range, input common-mode limits, required noise performance, and stability with the selected gain before production release.
추천
Portable Measurement Front End
The MCP606-I/P is suitable for portable measurement front ends that amplify weak, low-frequency analog signals under a constrained power budget. The 18.7 uA typical operating current supports battery life, and the 155 kHz gain-bandwidth product provides more than enough bandwidth for many temperature, pressure, and resistance-sensor signals. Its rail-to-rail output can improve usable dynamic range in a low-voltage system. Check offset accuracy, input bias current, noise, and common-mode behavior against the sensor and instrumentation requirements rather than assuming general-purpose specifications are sufficient.
추천
Low-Voltage Signal Buffer
Use the MCP606-I/P as a unity-gain buffer when a sensor or divider must drive a downstream ADC without loading the source. The family is unity-gain stable and has a 155 kHz gain-bandwidth product, which is suitable for many low-frequency buffering tasks. Rail-to-rail output swing can preserve signal range in compact systems, while the 18.7 uA typical current helps limit power use. Confirm output load, capacitive loading, settling requirements, input offset, and the ADC’s acquisition behavior with the manufacturer’s application guidance.
추천
Portable Instrumentation
The MCP606-I/P can support portable instrumentation requiring modest bandwidth and low supply current. Its 2.5 V minimum supply voltage is helpful for single-cell or reduced-voltage systems, and the 155 kHz gain-bandwidth product is adequate for many sensor, control, and analog monitoring functions. The rail-to-rail output swing helps maximize signal excursion in a constrained enclosure. Designers should still evaluate input-referred noise, offset drift, common-mode range, output drive, and temperature stability for precision measurement specifications.
추천
Low-Voltage Control Signal Conditioning
The MCP606-I/P is appropriate for conditioning low-voltage control signals in battery-operated equipment, provided the control bandwidth is modest. Its typical 18.7 uA current and 155 kHz gain-bandwidth product support efficient analog amplification without introducing a high-speed, high-power architecture. The 2.5 V to 6.0 V operating range aligns with low-voltage control rails. For actuator or feedback loops, verify stability, output drive, noise, and propagation requirements; the basic family specification is not a substitute for a complete control-loop design.
추천
Portable Analog Signal Conditioning
The MCP606-I/P can serve as a general analog signal-conditioning element in portable products such as compact meters, handheld testers, and wearable-adjacent sensing modules. Its single-channel 155 kHz architecture is suited to low-frequency amplification and buffering, while 18.7 uA typical operating current supports power-conscious designs. The rail-to-rail output is valuable when the downstream converter or ADC has a narrow usable signal window. Validate input common-mode range, offset stability, noise, and PCB leakage before using it for high-impedance sources.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP606-I/P — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCP606T-I/P | MCP606-I/OT | MCP606-I/ST | MCP606T-I/ST |
|---|---|---|---|---|---|
| Product Type | Single micropower CMOS operational amplifier | MCP606-family operational amplifier | MCP606-family operational amplifier | MCP606-family operational amplifier | MCP606-family operational amplifier |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
주요 차별점
- Low-power single-channel CMOS operation (vs MCP606T-I/P)
- Low-voltage operation with rail-to-rail output (vs MCP606-I/OT)
- Single-channel PDIP format for through-hole assembly (vs MCP606-I/ST)
설계 노트
Estimated: the MCP606-I/P’s typical operating current is 18.7 uA. For a design operating at 3.0 V, the estimated device supply power is 3.0 V × 18.7 uA = 56.1 uW before considering external-load current, bias-current effects, and dynamic operation. Use the datasheet maximum-current conditions for battery-life calculations rather than treating this typical estimate as a worst-case value.
Place the op amp, input-source connection, feedback components, and decoupling capacitor close together to minimize parasitic resistance and capacitance. Keep high-impedance input traces short and shield them from switching nodes and high-current return paths. Because the verified data confirms an 8-pin PDIP package, follow the exact manufacturer pinout and package outline; the supplied data did not include a complete pin assignment, so do not infer pin numbers from package conventions.
Do not assume rail-to-rail output swing means rail-to-rail input capability. The supplied verified data explicitly confirms rail-to-rail output behavior but does not establish the full input common-mode range, output-load limits, noise, or absolute maximum ratings. Check those conditions in the manufacturer datasheet before connecting a sensor output near either supply rail, driving a heavy load, or operating at the maximum stated 6.0 V supply.
규정 준수 정보
Compliance status was not included in the verified web data. Check the current Microchip product documentation and applicable supplier declarations before production release.