Microchip Technology

MCP6541-I/P - 1.6V Push-Pull Comparator | Microchip Technology

부품 번호: MCP6541-I/P ✓ 활성
1.6V to 5.5V Vdss 600 nA Id 8-pin PDIP Package
MOQ: 1 |

MCP6541-I/P 개요

The Microchip Technology MCP6541-I/P is a single, push-pull output comparator designed for low-power single-supply operation. The device operates from 1.6V to 5.5V, has a typical quiescent current of 600 nA with a maximum of 1 microamp, and is supplied in an 8-pin PDIP package. Its rail-to-rail input operation and CMOS/TTL-compatible push-pull output make it suitable for low-voltage signal conditioning, threshold detection, and battery-powered systems.

A comparator is an analog integrated circuit that compares two input voltages and produces a digital output indicating which input is higher. The MCP6541 belongs to the broader comparator and analog signal-conditioning hierarchy, where its low supply voltage and low quiescent current help preserve energy in portable and embedded systems. Internal input hysteresis reduces output switching caused by input noise, helping improve system stability without requiring external filtering in many applications.

Key features include single-ended operation, greater-than-rail-to-rail input capability, push-pull output drive, and a low-power design optimized for battery-operated equipment. The output can interface directly with TTL and CMOS logic, while the comparator's low supply current helps limit standby consumption. The MCP6541 family is identified by Microchip as the single-comparator configuration, with related devices providing different input or output arrangements.

The MCP6541-I/P is appropriate for portable sensing, low-voltage threshold monitoring, signal crossing detection, and control systems where the input signals operate near the supply rails. Compared with a general-purpose comparator that may consume substantially more standby current, the MCP6541-I/P emphasizes microamp-class operation. Its push-pull output provides faster transitions than an open-drain arrangement and avoids the need for an external pull-up resistor when the output drives compatible CMOS or TTL logic.

The principal design consideration is input common-mode range. Engineers should confirm that the input signals remain within the comparator's specified operating range, including the effects of overvoltage on the input pins. The output must also be checked against the downstream logic supply and load requirements. For low-power systems, minimize leakage paths, use suitable PCB cleanliness practices, and account for comparator input bias current when working with high-impedance sensors.

This product page combines the manufacturer's operating information, package identification, search-specific technical context, and engineering guidance for selecting and implementing the MCP6541-I/P. The 8-pin PDIP package is suitable for through-hole assembly and prototypes, while the manufacturer's broader MCP6541 family also offers other package configurations. Confirm the exact suffix, electrical grade, and lifecycle status against the current Microchip product documentation before releasing a production design.

드롭인 대체품: MCP6541-I/P — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

MCP6541-E/P

✅ 드롭인
📦 8-pin PDIP
Same MCP6541 family, 1.6V to 5.5V supply, and 8-pin PDIP footprint; grade and temperature details may differ

📋 참조 대체품 (카탈로그에 없음)

MCP6541-I/P 최대 정격 & 전기적 특성

Comparator Type Single, single-ended comparator
Supply Voltage Range 1.6V to 5.5V
Quiescent Current Typical 600 nA
Quiescent Current Maximum 1 microamp
출력 유형 Push-pull, CMOS/TTL-compatible
Input Common-Mode Operation Greater than rail-to-rail
Output Swing Rail-to-rail
Input Hysteresis Internal input hysteresis
Propagation Delay 4 microseconds
패키지 8-pin PDIP
실장 유형 Through-hole

MCP6541-I/P 8-pin pdip 핀 구성 가이드

MCP6541-I/P(8-pin pdip 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

MCP6541-I/P의 8-pin pdip 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MCP6541-I/P.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MCP6541-I/P 적합 용도: 6 애플리케이션s: Battery-Powered Threshold Detection, Portable Sensor Conditioning, Low-Voltage Logic Interfacing, Power-Sequence Monitoring, Industrial Signal-Crossing Detection, LED and Indicator Control.

⚡

Battery-Powered Threshold Detection

The MCP6541-I/P is appropriate when a battery-powered system must compare a sensor signal against a reference without continuously consuming substantial current. Its typical quiescent current of 600 nA and 1 microamp maximum provide a low baseline power draw, while the 1.6V to 5.5V operating range supports common low-voltage rails. The push-pull output can directly drive a CMOS control input, and the internal hysteresis helps prevent repeated switching from small input-voltage variations. The principal design check is whether the sensed voltage remains inside the comparator's specified input common-mode range under battery discharge and charger transients.

📱

Portable Sensor Conditioning

Use the MCP6541-I/P to convert an analog sensor condition into a logic-level event for a portable instrument. Its greater-than-rail-to-rail input operation is useful when the signal approaches the supply rails, while the low quiescent current preserves battery life during monitoring intervals. The 4 microsecond propagation delay is suitable for many status and alarm functions rather than high-speed timing. Input bias current, leakage resistance, and PCB cleanliness remain important when the sensor has very high source impedance because those effects can shift the decision point even though the comparator itself consumes very little power.

🔧

Low-Voltage Logic Interfacing

The MCP6541-I/P can interface a low-voltage analog decision to CMOS or TTL-compatible digital logic because its output is push-pull and swings rail-to-rail. This arrangement removes the external pull-up resistor normally associated with an open-drain output and can produce cleaner transitions under moderate capacitive loading. The 1.6V minimum supply supports resource-constrained embedded systems, while the 5.5V maximum aligns with common low-voltage logic rails. Confirm that the downstream device accepts the resulting output levels and that the comparator's supply and input voltages remain within their specified limits.

🖥️

Power-Sequence Monitoring

The MCP6541-I/P can monitor a supply rail against a reference and provide a digital power-status indication in a compact embedded system. Its low quiescent current is valuable when the monitored rail remains present for long periods, and the push-pull output simplifies connection to a supervisor or system controller input. Internal hysteresis helps separate valid transitions from noise around the threshold. The reference source must have adequate stability and low impedance, while the monitored rail should remain within the comparator's input common-mode limits to avoid inaccurate status reporting.

🏭

Industrial Signal-Crossing Detection

For industrial control boards operating from a low-voltage rail, the MCP6541-I/P can detect when a monitored signal crosses a defined reference level. Its rail-to-rail push-pull output can drive downstream digital circuitry, and the low quiescent current reduces standby consumption in distributed monitoring equipment. The 4 microsecond propagation delay is appropriate for many event-detection tasks. In industrial environments, use appropriate external protection for the input and power pins, and confirm that transient levels cannot exceed the comparator's absolute-maximum ratings.

💡

LED and Indicator Control

The MCP6541-I/P can decide whether an indicator or control signal should be enabled when a monitored voltage crosses a threshold. The push-pull output provides a defined high or low state without a pull-up resistor, and the 1.6V to 5.5V operating range can suit compact control platforms. The internal hysteresis reduces visible indicator flicker when the monitored signal contains small noise components. Select resistor values and drive current based on the indicator requirements, and make sure the output remains compatible with the load and the comparator supply voltage.

What is the operating voltage of MCP6541-I/P?
The MCP6541-I/P operates from 1.6V to 5.5V according to the Microchip Technology MCP6541 product page. This supply range supports low-voltage digital systems and energy-conscious battery-powered equipment. The operating voltage is independent of the comparator's input common-mode range, so both supply limits and signal amplitudes should be checked during design review. The device is a single-ended comparator with push-pull output and greater-than-rail-to-rail input operation.
What is the quiescent current of MCP6541-I/P?
The MCP6541-I/P has a typical quiescent current of 600 nA and a maximum of 1 microamp, according to Microchip Technology. This very low standby consumption is the main reason to consider the MCP6541 for battery-powered sensing and monitoring circuits. Actual application consumption also depends on output activity and the current drawn by downstream logic. Use the maximum value for conservative standby-power calculations.
Where can I download the MCP6541-I/P datasheet PDF?
The MCP6541-I/P datasheet PDF is available from Microchip Technology through the official MCP6541 Output Sub-Microamp Comparators document. The manufacturer document covers the MCP6541 family, electrical characteristics, comparator operation, and package options. Use the exact suffix suffixing convention when confirming whether a specification applies to the 8-pin PDIP MCP6541-I/P rather than another package or grade.
Where can I find the MCP6541-I/P pinout?
The MCP6541-I/P pinout is shown in the pin-configuration section of the Microchip Technology MCP6541 datasheet, using the 8-pin PDIP package drawing. The package key for this page is PDIP-8, and the exposed pin assignments should be transcribed from the manufacturer datasheet before PCB routing. Do not infer pin names from another package variant in the MCP6541 family.
What is the MCP6541-I/P comparator used for?
The MCP6541-I/P is used for low-voltage threshold detection, signal crossing detection, and comparison of two analog signals. Its push-pull output drives CMOS or TTL-compatible logic, while its greater-than-rail-to-rail input operation helps evaluate signals near the supply rails. The 1.6V to 5.5V supply range and 600 nA typical quiescent current make it useful in portable monitoring and embedded control systems.
What is the output type of MCP6541-I/P?
The MCP6541-I/P uses a push-pull output that swings rail-to-rail and is compatible with CMOS and TTL logic, according to the manufacturer datasheet. Unlike an open-drain comparator, it does not require a pull-up resistor for a conventional digital-logic load. This output arrangement can reduce external component count, although input and output timing should still be checked when driving long lines or heavily capacitive nodes.
Does MCP6541-I/P support rail-to-rail input operation?
Yes, the MCP6541-I/P provides greater-than-rail-to-rail input operation according to Microchip Technology. This allows the comparator to evaluate input signals close to the negative and positive supply rails, which is useful in low-voltage systems. The complete datasheet electrical characteristics should be used to verify the exact input voltage limits, including any restrictions caused by supply voltage or overvoltage conditions.
How much current does MCP6541-I/P use?
The MCP6541-I/P uses 600 nA typical quiescent current and no more than 1 microamp under the specified standby conditions, according to the MCP6541 product page. The output can drive heavy DC or capacitive loads as stated for the MCP6541 family, so total current depends on the operating state and load. For low-power budget calculations, combine the maximum quiescent specification with the measured or calculated load current.
When should I choose MCP6541-I/P over a higher-power comparator?
Choose MCP6541-I/P when the design uses a 1.6V to 5.5V supply, needs low standby consumption, and can use a push-pull output. Its 600 nA typical quiescent current is particularly useful in battery-operated systems. Choose a different comparator only when the application requires a different package, input configuration, voltage range, output architecture, or a verified automotive qualification that is not established for this suffix.
What is the difference between MCP6541-I/P and MCP6541-E/P?
Both MCP6541-I/P and MCP6541-E/P are 8-pin PDIP versions of the Microchip MCP6541 single push-pull comparator, and both use the same comparator family architecture. The suffix identifies different manufacturer grade or temperature options rather than a change in the basic comparator function. Verify the grade-specific operating-temperature limits and ordering information in the Microchip datasheet before treating one as a replacement for the other.
Can MCP6541-E/P replace MCP6541-I/P?
The MCP6541-E/P is the closest identified same-package option for the MCP6541-I/P because both are 8-pin PDIP single push-pull comparators. The comparison is not enough to establish unconditional interchangeability: temperature grade, operating-temperature range, and any grade-specific qualifications must be checked. The MCP6541-I/P should be selected when its specified grade is required, while the E/P suffix is appropriate only when its grade limits fit the design.
What drop-in replacement is available for MCP6541-I/P?
The MCP6541-E/P is a pin-compatible 8-pin PDIP comparator identified in the comparison information, making it the closest drop-in candidate for the MCP6541-I/P. No additional verified cross-brand, same-package replacements were identified. Before substitution, compare the electrical characteristics, temperature grade, hysteresis, propagation delay, and input common-mode requirements directly against the MCP6541-I/P datasheet.
Is MCP6541-I/P suitable for battery-powered applications?
Yes, the MCP6541-I/P is suitable for battery-powered applications because its typical quiescent current is only 600 nA and its maximum is 1 microamp. The 1.6V to 5.5V operating range also suits many low-voltage systems. Leakage through high-impedance sensors, PCB contamination, and the downstream load can dominate total power in a practical design, so those paths should also be evaluated.
How does MCP6541-I/P compare with an open-drain comparator?
The MCP6541-I/P provides a push-pull output with rail-to-rail swing, whereas an open-drain comparator requires an external pull-up resistor and can have a slower rising edge under capacitive loading. The push-pull topology simplifies direct CMOS or TTL interfacing and reduces passive-component count. The trade-off is that the output actively drives both high and low states, so output-current and power requirements should be considered in the load design.
How should MCP6541-I/P be selected for a low-voltage comparator design?
Select MCP6541-I/P when the supply is within 1.6V to 5.5V, low quiescent current is important, and the output can use a rail-to-rail push-pull signal. Also confirm that the comparator's input common-mode limits cover the sensor or signal range, that the 4 microsecond propagation delay meets the response requirement, and that the 8-pin PDIP package fits the mechanical design. The manufacturer's datasheet remains the controlling source for limits and test conditions.

엔지니어링 참조 데이터: MCP6541-I/P — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose MCP6541-I/P when your design needs a single-ended comparator operating from 1.6V to 5.5V, with very low quiescent current and a push-pull output that directly drives CMOS or TTL-compatible logic. The 600 nA typical quiescent current is especially attractive in battery-powered sensing, while greater-than-rail-to-rail input operation supports signals near the supply rails. MCP6541-E/P is the closest identified same-package alternative and can be considered when its grade-specific temperature limits match the installation environment. Because only one verified same-package replacement was identified, validate electrical and temperature requirements directly rather than assuming broad interchangeability. Choose a different comparator if the design requires open-drain behavior, multiple channels, a different package, a wider supply range, faster propagation, or an explicitly documented automotive qualification.

대체품과의 비교

파라미터 이 제품 MCP6541-E/P
Package 8-pin PDIP 8-pin PDIP
Brand Microchip Technology Microchip Technology
Comparator Configuration Single, single-ended Single, single-ended
Supply Voltage Range 1.6V to 5.5V 1.6V to 5.5V
Typical Quiescent Current 600 nA 600 nA
Maximum Quiescent Current 1 microamp 1 microamp
Output Type Push-pull, CMOS/TTL-compatible Push-pull, CMOS/TTL-compatible
Input Common-Mode Operation Greater than rail-to-rail Greater than rail-to-rail
Propagation Delay 4 microseconds 4 microseconds
Mounting Type Through-hole Through-hole

주요 차별점

  • Very low standby consumption (vs MCP6541-E/P)
  • Direct rail-to-rail digital drive (vs MCP6541-E/P)
  • Low-voltage analog threshold capability (vs MCP6541-E/P)
  • Through-hole assembly compatibility (vs MCP6541-E/P)

설계 노트

Use the 600 nA typical and 1 microamp maximum quiescent-current figures when estimating standby consumption, then add the output and load current separately. In a battery design, leakage through the sensor, input protection network, PCB surface, and downstream CMOS inputs can exceed the comparator's own consumption. Keep high-impedance input traces short, use guarded routing where practical, and avoid adding avoidable resistive leakage paths to the reference or signal node.

Place the comparator close to the signal source when the source impedance is high, because input bias current and input leakage create an offset voltage across the source impedance. The manufacturer documents internal input hysteresis, which helps reject small input disturbances, but hysteresis does not correct an offset caused by leakage. Verify the input common-mode limits at the lowest system supply and account for transient input protection leakage before finalizing the threshold design.

Route the push-pull output directly to the receiving logic input and keep the trace short, particularly when the output drives a capacitive input or long interconnect. No pull-up resistor is required for the normal CMOS or TTL interface described for this family. Provide a solid ground return for the comparator and logic system, decouple the 1.6V to 5.5V supply close to the device, and keep sensitive input nodes away from switching-current paths to minimize differential noise at the threshold.

Do not treat rail-to-rail input operation as permission to exceed the absolute-maximum ratings on the input pins. Negative excursions, supply transients, and signals above the maximum input voltage require suitable clamping or series protection. Also verify that the selected MCP6541 suffix has the required operating-temperature grade before using it in an industrial or automotive environment. The comparator's fast output edges and nearby sensitive input can create coupling, so maintain practical separation between input and output loops.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

Compliance attributes were not stated in the manufacturer product information or datasheet excerpts. The MCP6541-I/P is a standard industrial comparator rather than an explicitly documented automotive-qualified option.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

mcp6541 datasheet mcp6541 comparator mcp6541 pdf microchip mcp6541 MCP6541-I/P datasheet PDF MCP6541-I/P pinout MCP6541-I/P operating voltage MCP6541-I/P quiescent current MCP6541-I/P equivalent MCP6541-I/P replacement MCP6541-I/P vs MCP6541-E/P MCP6541-I/P 8-PDIP MCP6541-I/P price MCP6541-I/P lead time MCP6541-I/P battery powered application

관련 부품 & 용어

Microchip Technology MCP6541 MCP6541-I/P MCP6541-E/P comparator analog comparator single-ended comparator push-pull output CMOS logic TTL logic rail-to-rail input rail-to-rail output quiescent current input hysteresis low-voltage power supply battery-powered electronics industrial control sensor signal conditioning 8-pin PDIP PDIP package through-hole assembly 1.6V to 5.5V 600 nA 4 microseconds
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기