MK61FX512VMD15 - 150MHz Cortex-M4 512KB MCU | NXP
부품 번호: MK61FX512VMD15 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $9.9971 | $10.00 |
| 10 | $9.49 | $94.90 |
| 100 | $8.99 | $899.00 |
| 500 | $8.49 | $4,245.00 |
| 1,000 | $7.99 | $7,990.00 |
MK61FX512VMD15 개요
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded computing hierarchy: microcontroller -> embedded processor -> system-on-chip -> application processor. The Kinetis K61 sub-family sits at the high-performance end of NXP's Kinetis K-series MCU portfolio, targeting control algorithms, sensor data processing, and audio processing where computational headroom and security are both required.
Key features of the MK61FX512VMD15 include the 150 MHz Cortex-M4 core with DSP instructions and floating-point unit, dual USB controllers (2x USB), an Ethernet MAC with IEEE 1588 support, and NXP's DryIce anti-tamper and encryption technology. The 512 KB FlexMem partition can be reallocated between program flash and emulated EEPROM, giving designers flexible non-volatile memory management for data logging and parameter storage.
Technically, the device operates from 1.8V, 2.5V, or 3.3V supplies (per Arrow product data) and integrates analog and digital peripherals typical of the Kinetis K-family platform, including high-speed ADCs, timers, and serial interfaces. The M4F core's hardware FPU accelerates control loops and audio DSP algorithms, while the hardware crypto and tamper-detection subsystems protect firmware and sensitive data in connected industrial equipment.
Typical applications include secure industrial automation nodes, networked motor-control and power-conversion systems, building control with Ethernet connectivity, medical instrumentation requiring tamper resistance, and audio processing endpoints leveraging the core DSP capability.
When designing with this device, plan power-supply sequencing for the multi-rail operation and account for the 144-ball BGA layout early, since the package requires controlled-impedance routing for Ethernet and USB signals.
This page synthesizes distributor pricing, drop-in alternatives within the Kinetis K-series, and practical design notes not found in the manufacturer datasheet alone.
드롭인 대체품: MK61FX512VMD15 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MK61FX512VMD15 (동일 폼 팩터 및 풋프린트) — 차이점: Flash Memory, Core Processor, Ethernet, Family, Maximum Clock Frequency.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MK61DN512VMD15
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MK60FX512VMD15
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MK60DN512VMD15
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MK60DN256VMD10
✅ 드롭인✓ 재고 있음
가격 문의
데이터시트 보기 →MK40DN512ZVMD10
✅ 드롭인✓ 재고 있음
$8.38 / 개
데이터시트 보기 →MK61FX512VMD15 최대 정격 & 전기적 특성
| Core Processor | ARM Cortex-M4 (M4F) |
| Core Size | 32-Bit |
| 최대 클록 주파수 | 150 MHz |
| Flash Memory | 512 KB (512K x 8) |
| FlexMem | 512 KB (flash/EEPROM partitionable) |
| RAM Size | 128 KB |
| 공급 전압 | 1.8V / 2.5V / 3.3V |
| 패키지 | 144-MAPBGA (13 x 13 mm) |
| 실장 유형 | Surface Mount |
| USB Controllers | 2x USB |
| Ethernet | 10/100 Mbps Ethernet MAC with IEEE 1588 |
| Product Family | Kinetis K60/K61 |
| Peripherals | DMA, PWM, WDT, ADC, timers |
| Connectivity Peripherals | USB, Ethernet, CAN, UART, SPI, I2C |
MK61FX512VMD15 144-mapbga (13 x 13 mm) 핀 구성 가이드
MK61FX512VMD15(144-mapbga (13 x 13 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MK61FX512VMD15.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MK61FX512VMD15 적합 용도: 6 애플리케이션s: Secure Industrial Automation Nodes, Networked Motor Control and Power Conversion, Audio Processing Endpoints, Building Control with Ethernet Connectivity, Tamper-Resistant Metering and Payment Systems, Medical Instrumentation and Diagnostics.
Secure Industrial Automation Nodes
The MK61FX512VMD15 fits secure industrial automation because its 150 MHz Cortex-M4 core executes real-time control algorithms while the DryIce anti-tamper and hardware encryption subsystem protect firmware, keys, and process data in networked equipment. In a typical node, the MCU runs the control loop with the hardware FPU, communicates upstream via the 10/100 Ethernet MAC with IEEE 1588 time-stamping, and stores calibration parameters in the 512 KB FlexMem EEPROM partition. The trade-off versus a plain K60 is cost and package complexity, but for plants requiring IEC-level tamper accountability, the integrated security eliminates an external secure element, reducing BOM count and attack surface.
추천
Networked Motor Control and Power Conversion
Motor drives and power-conversion stages benefit from the MK61FX512VMD15's combination of a 150 MHz M4F core with single-cycle FMA, high-resolution PWM timers, and fast ADCs for current sensing. The Cortex-M4 executes field-oriented control at multi-kHz loop rates while the Ethernet MAC with IEEE 1588 supports deterministic industrial networking without an external PHY-layer timing solution. Dual USB enables commissioning and firmware update interfaces alongside the primary fieldbus. The 1.8V/2.5V/3.3V multi-rail operation requires a sequenced supply design. Compared with MK60DN256VMD10, the 512 KB flash headroom accommodates complex control plus a protocol stack in one device.
추천
Audio Processing Endpoints
NXP explicitly positions the K60/K61 family for audio processing: the 150 MHz hardware-FPU core accelerates filters, sample-rate conversion, and FFT-based analysis, while 128 KB SRAM provides buffering for multiple audio streams. Dual USB controllers allow simultaneous USB device (audio class) and USB host (mass storage or dongle) roles, and I2S-style serial interfaces connect codecs. The FlexMem EEPROM partition stores DSP presets and user settings without external EEPROM. Against the MK40DN512ZVMD10, this part adds the DSP headroom and memory needed for multi-channel processing; the cost trade-off is justified when sample rates exceed 96 kHz or multi-band DSP chains are required.
추천
Building Control with Ethernet Connectivity
Building automation controllers need reliable networking, ample non-volatile memory, and long service life - all addressed by the MK61FX512VMD15. The integrated 10/100 Ethernet MAC eliminates an external MAC chip, IEEE 1588 supports synchronized scheduling across HVAC zones, and the 512 KB flash plus 512 KB FlexMem store protocol stacks (BACnet-style objects), schedules, and logged data in partitionable memory. The Cortex-M4 core at 150 MHz leaves headroom for encryption of network traffic using the hardware crypto engine. Compared to running two chips (controller plus Ethernet module), this single-device integration lowers BOM cost and board area in the 13 x 13 mm BGA footprint.
추천
Tamper-Resistant Metering and Payment Systems
Electricity meters and payment terminals are the flagship use case for the K61's DryIce technology: the device detects physical tampering attempts and can zeroize keys automatically, satisfying security requirements that plain microcontrollers cannot meet without an external secure MCU. The 150 MHz core processes metering computations and billing cryptography, FlexMem stores tariff tables in emulated EEPROM with wear leveling, and CAN or Ethernet handles utility communication. Because security features are die-integrated, designers avoid the complexity of discrete tamper circuits. The trade-off is supply-chain care: MK61 parts with anti-tamper require secure provisioning procedures that K60 alternatives like MK60DN512VMD15 do not.
추천
Medical Instrumentation and Diagnostics
Portable and benchtop medical instruments use the MK61FX512VMD15 where signal processing power, data integrity, and tamper resistance converge. The 150 MHz M4F core runs DSP filters on sensor channels (ECG, blood-analysis optics), the 128 KB RAM supports long capture buffers, and hardware encryption protects patient data at rest in flash and in transit over Ethernet or USB. The anti-tamper subsystem helps satisfy device integrity requirements for calibration-critical instruments. Multi-rail 1.8V/2.5V/3.3V operation supports low-power analog domains alongside the digital core. Versus MK60DN256VMD10, the doubled flash and FlexMem EEPROM fit audit logs and calibration archives without external memory ICs.
추천
추천 제품 요약
엔지니어링 참조 데이터: MK61FX512VMD15 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MK61DN512VMD15 | MK60DN256VMD10 | MK40DN512ZVMD10 |
|---|---|---|---|---|
| Package | 144-MAPBGA (13x13) | 144-MAPBGA (13x13) - same | 144-MAPBGA (13x13) - same | 144-MAPBGA (13x13) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Clock | Cortex-M4 @ 150 MHz | Cortex-M4 @ 150 MHz | Cortex-M4 @ 120 MHz | Cortex-M4 @ 100 MHz |
| Flash | 512 KB | 512 KB | 256 KB | 512 KB |
| RAM | 128 KB | 128 KB | 64 KB | 64 KB |
| Ethernet | Yes (with IEEE 1588) | Yes | Yes | No |
| Anti-Tamper (DryIce) | Yes | Yes | No | No |
| USB Controllers | 2x USB | 2x USB | 1x USB | 1x USB |
주요 차별점
- Die-integrated DryIce anti-tamper and encryption (vs MK60DN512VMD15)
- 150 MHz core with dual USB (vs MK60DN256VMD10)
- 512 KB FlexMem partitionable as EEPROM (vs MK40DN512ZVMD10)
설계 노트
The MK61FX512VMD15 operates from 1.8V, 2.5V, and 3.3V rails per Arrow product data. Design a sequenced power tree: the VBAT/core domains must be stable before peripheral IO ramps. Use independent ferrite-isolated supplies for analog ADC references to preserve noise floor. Estimated: at 150 MHz the K61 core draws in the tens-of-mA range; budget regulator headroom of at least 100 mA per rail for IO toggling margin. Verify exact per-rail currents in the K61 datasheet power chapter before finalizing the regulator selection.
The 144-MAPBGA (13 x 13 mm) package requires a planned fanout. Start layer assignment with a solid internal ground plane under the die, place 0.1uF ceramics on the bottom side directly under the ball array (one per power ball plus bulk capacitance), and route Ethernet RMII and USB differential pairs with controlled 90-ohm impedance. Follow the NXP Kinetis hardware design application note for ball-map escape routing on 4-6 layer boards. Avoid routing high-speed signals under the anti-tamper mesh region if security requirements apply.
Do not assume FlexMem partitioning from a prior K60 design: the FX configuration of the MK61FX512VMD15 changes default flash/FlexNVM boundaries versus DN parts, and firmware that hardcodes addresses must be revalidated. Also confirm the security (FSEC) byte configuration before first programming - an incorrect FSEC value can permanently lock the device. Finally, since this is a BGA, rework requires X-ray inspection capability; prototype with verified socketed or castellated evaluation hardware before committing to the production footprint.
규정 준수 정보
NXP product page lists Environmental Quality data behind its product portal; RoHS/REACH status should be confirmed from the official NXP environmental page before export documentation.
