MK40DN512ZVMD10 - 100MHz Cortex-M4 Kinetis K40 MCU | NXP
MPN: MK40DN512ZVMD10 ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $12.95 | $12.95 |
| 10 | $11.66 | $116.60 |
| 100 | $10.36 | $1,036.00 |
| 500 | $9.32 | $4,660.00 |
| 1,000 | $8.38 | $8,380.00 |
MK40DN512ZVMD10 Overview
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (flash for program storage, SRAM for data), and peripherals on one chip, sitting at the top of the embedded electronics hierarchy within the broader families of microcontrollers and system-on-chip devices. The Kinetis K series is NXP's high-performance MCU line based on the ARM Cortex-M4 core, which adds DSP instructions and hardware floating-point capability for computationally demanding embedded applications.
Key features of the MK40DN512ZVMD10 include a 100 MHz ARM Cortex-M4 core with DSP functionality, an integrated full-speed USB 2.0 OTG controller, a segment LCD controller, and a supply voltage range of 1.71 V to 3.6 V. The part operates from 1.8V, 2.5V, or 3.3V rails, and provides 52 I/O ports per the digchip parameter listing. The DN suffix denotes the split-gate flash variant of the K40 family with 512 KB flash and 128 KB SRAM.
Technically, the K40 family provides advanced analog integration and serial communication peripherals, per the chipdig datasheet summary, targeting consumer, industrial, and medical applications. The Cortex-M4 core delivers up to 100 MHz performance with a single-cycle multiply-accumulate unit supporting digital signal processing workloads, while the USB OTG controller removes the need for an external USB PHY in device-to-device designs.
Typical applications include human-machine interface (HMI) panels using the segment LCD controller, USB-connected industrial instruments, and medical monitoring devices where integrated analog and communications reduce bill-of-materials count.
Designers should note lifecycle status: NXP lists the MK40DN512ZVMD10 as NRND (Not Recommended for New Designs), so new projects should evaluate successors such as the Kinetis K6x while legacy designs can continue to source this part from distributors.
This page synthesizes distributor pricing, drop-in alternatives, pin-level detail, and practical design notes not found in the manufacturer datasheet, adding procurement and cross-reference value beyond the NXP product page.
Drop-in alternatives for MK40DN512ZVMD10 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MK40DN512ZVMD10 (same form factor and footprint) — differing in Package, ADC, Operating Temperature Range, USB, DAC.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MK60DN512ZVMD10
✅ Drop-In✓ In Stock
$14.81 / Unit
View Datasheet →MK40DN512ZVMD10
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$8.38 / Unit
View Datasheet →MK70DN512ZVMF12
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
PK40N512VMD100
✅ Drop-In📋 Reference alternative (not in catalog)
MK40DN512ZVLQ10
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MK40DX256ZVMD10
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
MK40DN512ZVMD10 Maximum Ratings & Electrical Characteristics
| Core | ARM Cortex-M4 |
| Core Width | 32-bit |
| Max Clock Frequency | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Operating Supply | 1.8 V / 2.5 V / 3.3 V |
| I/O Ports | 52 |
| USB | Full-Speed USB 2.0 OTG |
| LCD Controller | Segment LCD |
| Family | Kinetis K40 |
| Package | 144-MAPBGA (13 x 13 mm) |
| Mounting Type | Surface Mount |
| Terminal Form | Ball (LFBGA / MAPBGA) |
| Temperature Grade | Industrial |
| Lifecycle Status | NRND (Not Recommended for New Designs) |
MK40DN512ZVMD10 144-mapbga (13 x 13 mm) Pin Configuration Guide
Pin configuration for MK40DN512ZVMD10 (144-mapbga (13 x 13 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MK40DN512ZVMD10.
Refer to the datasheet for full pin configuration.
Typical Applications
MK40DN512ZVMD10 is suitable for 6 applications: HMI Panels with Segment LCD, USB-Connected Industrial Instruments, Medical Monitoring Devices, Consumer Appliance Controls, Building Automation and Metering, Portable Test and Measurement.
HMI Panels with Segment LCD
The MK40DN512ZVMD10's integrated segment LCD controller makes it a strong fit for human-machine interface panels in meters, thermostats, and appliance controls. Driving a segment LCD directly from the MCU eliminates a dedicated LCD driver IC, reducing board area and BOM cost, while the 100 MHz Cortex-M4 core provides headroom for menu logic, communication stacks, and control loops simultaneously. With 512 KB flash and 128 KB SRAM, the device stores rich firmware including Unicode fonts, calibration tables, and OTA-style update images. Typical designs clock the LCD from the internal low-power oscillator for independent display retention while the core sleeps; the 1.71 V to 3.6 V supply range supports direct 3.3 V panel biasing schemes common in industrial front panels.
Recommended
USB-Connected Industrial Instruments
With a full-speed USB 2.0 OTG controller integrated on-chip, the MK40DN512ZVMD10 suits bench instruments, data loggers, and factory test equipment that communicate with a PC or with each other over USB. OTG capability means the instrument can act as either device (enumerating to a host PC for configuration and data upload) or host (reading USB flash drives for firmware updates and log export). The 100 MHz Cortex-M4 with DSP instructions handles real-time signal processing - FFT analysis, filtering, PID control - while the USB stack runs concurrently. The 128 KB SRAM accommodates large sample buffers for burst acquisition, and 512 KB flash stores multi-protocol firmware. Supply operation from 1.8V/2.5V/3.3V rails eases integration with existing analog front ends.
Recommended
Medical Monitoring Devices
The Kinetis K40 family explicitly targets medical applications per NXP datasheet material, and the MK40DN512ZVMD10's combination of integrated analog, USB, and segment LCD addresses portable patient monitors, glucose meters, and pulse oximeters. The 100 MHz Cortex-M4's single-cycle MAC accelerates digital filtering of biopotential signals, while 128 KB SRAM buffers waveform data for display trends and alarm evaluation. USB connectivity supports docking to clinical workstations for data retrieval, and the segment LCD controller drives low-power readouts that extend battery life in ambulatory devices. Designers should follow IEC 60601 isolation practices at the system level; the MCU's wide 1.71 V to 3.6 V operating range and industrial temperature grade support the power and environmental constraints typical of handheld medical electronics.
Recommended
Consumer Appliance Controls
Consumer appliances - coffee machines, air conditioners, washing machines - benefit from the MK40DN512ZVMD10's balance of display control, connectivity, and processing power. The segment LCD driver renders status icons and digit readouts without a driver IC, the USB OTG port enables service diagnostics and firmware updates via a standard cable, and the 100 MHz Cortex-M4 core runs motor-control and sensor-fusion algorithms with DSP efficiency. At 512 KB flash there is ample room for multi-language menus and self-test routines. The K40's advanced analog integration (per the chipdig family summary) supports NTC temperature sensing and touch or encoder input processing, consolidating functions that would otherwise require several external components into one 13 x 13 mm MAPBGA.
Recommended
Building Automation and Metering
Smart meters, HVAC controllers, and access-control nodes are natural fits for the MK40DN512ZVMD10. The segment LCD directly drives consumption digits and status icons required by utility metering standards, while the 100 MHz Cortex-M4 performs metrology calculations - RMS computation, energy accumulation, tamper detection - using its DSP arithmetic. USB OTG provides a local service interface for commissioning and calibration without opening the enclosure, and the 512 KB flash retains calibration constants plus dual-bank firmware images for field updates. With 52 GPIOs available, the MCU interfaces to valves, relays, and communication modules over UART/SPI/I2C. The industrial temperature grade and 1.71 V to 3.6 V supply range align with the environmental envelope of wall-mounted building equipment.
Recommended
Portable Test and Measurement
Handheld and battery-powered test tools - cable testers, environmental meters, inspection devices - exploit the MK40DN512ZVMD10's low-voltage operation and integrated peripherals. Running from a single-cell Li-ion through a 3.3 V regulator (within the 1.71 V to 3.6 V window), the device's segment LCD draws minimal power for always-on readouts. The 100 MHz Cortex-M4 executes signal-analysis routines such as tone detection and waveform classification using DSP instructions, and the 128 KB SRAM stores capture buffers for on-device review. USB OTG enables both PC connectivity for report upload and host-mode reading of USB drives for logged data export. The 144-ball MAPBGA conserves PCB area in pen-form-factor instruments where every square millimeter counts.
Recommended
Recommended Products Summary
Engineering reference data for MK40DN512ZVMD10 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MK60DN512ZVMD10 | PK40N512VMD100 | MK40DN512ZVLQ10 | MK40DX256ZVMD10 |
|---|---|---|---|---|---|
| Package | 144-MAPBGA (13 x 13 mm) | 144-MAPBGA (13 x 13 mm) - same | LQFP-144 (lead-frame) | LQFP-144 | 144-MAPBGA (13 x 13 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Frequency | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz | ARM Cortex-M4, 100 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 64 KB |
| Supply Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| USB / LCD Peripherals | Full-Speed USB 2.0 OTG + Segment LCD | USB OTG + Segment LCD (+ Ethernet, security) | USB OTG + Segment LCD | USB OTG + Segment LCD | USB OTG + Segment LCD |
Key Differentiators
- Same-footprint upgrade path to K60 tier (vs MK60DN512ZVMD10)
- Ball-grid package for density and signal integrity (vs PK40N512VMD100)
- Largest K40 memory configuration (vs MK40DX256ZVMD10)
- NRND status requires supply planning (vs PK40N512VMD100)
Design Notes
Design the power tree around the K40's dual-rail architecture: the MCU core is internally regulated from the VDD rail (1.71 V to 3.6 V per distributor data), so provide a clean 3.3 V rail with at least 10 uF bulk plus 0.1 uF ceramic decoupling at each VDD/VDDA ball pair. Separate analog supply filtering (ferrite bead plus 1 uF) for VDDA improves ADC accuracy in metering and medical designs. Flash programming is only guaranteed within the specified flash-write voltage window in the K40 datasheet - verify the rail stays in range during brownout or add a supervisor to hold reset.
The 144-MAPBGA (13 x 13 mm, 0.8 mm ball pitch per DigiKey listing geometry) requires via-in-pad or dog-bone fanout on all four quadrants. Plan at least one internal layer as a ground plane directly beneath the die for return paths, and route the USB D+/D- pair as 90-ohm differential with length matching within 1 mm. Because the part is NRND, lock your footprint and stack-up to the NXP mechanical drawing and avoid second-source footprint tweaks that would complicate a future migration to an LQFP-packaged successor.
The single biggest program risk is lifecycle, not electrical: NXP marks this part NRND, so design reviews should sign off on a migration plan (last-time-buy quantities or a K6x/LQFP-successor path) before production release. Second, segment LCD drive uses the internal LCD controller's biasing scheme - check that your glass waveform (1/3, 1/4 duty) matches the K40 controller's supported modes, since mismatch causes ghosting. Third, when reusing code from other Kinetis parts, confirm clock configuration: the 100 MHz core requires proper PLL setup, and out-of-spec PLL locks are a common bring-up failure.
With a 100 MHz core and 52 GPIOs toggling, ground bounce on the MAPBGA is a real concern for mixed analog/digital designs. Assign a ground ball adjacent to each bank of fast-switching I/O, minimize simultaneously switching outputs in firmware (stagger port writes), and keep the VDDA domain physically separated on the layout. For USB compliance, follow the USB 2.0 full-speed trace impedance guidance from the Kinetis hardware design application notes published by NXP/Freescale, and place the common-mode choke and ESD array close to the connector.
Compliance Information
Compliance data was not included in the provided web results. NXP product page lists Environmental Quality information for this part; consult nxp.com/part/MK40DN512ZVMD10 for authoritative RoHS/REACH status.
