MKL02Z32VFK4 - 48MHz 32KB Flash Cortex-M0+ MCU | NXP
부품 번호: MKL02Z32VFK4 ✓ 활성MKL02Z32VFK4 개요
A microcontroller is a programmable semiconductor that integrates a processor core, nonvolatile program memory, working memory, and peripherals into one device. The Kinetis KL02 family is the entry point into the Kinetis L series and provides a migration path from 8-bit designs to a 32-bit Arm architecture. Its small package is especially useful when board space, energy use, and low system complexity are primary design constraints.
The MKL02Z32VFK4 provides a 48 MHz Cortex-M0+ core and 32 KB flash organized as 32K x 8 bits. Its 3.3 V operating supply supports compact embedded systems that require a low-power, general-purpose control platform. The 24-QFN package is only 4 x 4 mm, allowing the MCU to be used in space-constrained products without relying on a large-outline package.
The Cortex-M0+ core is designed for efficient control-oriented execution rather than graphics or high-performance application processing. Code stored in flash remains available after power loss, while the integrated peripherals support communications, timing, and control functions in embedded products. NXP positions the KL02 family as software- and tool-compatible with other Kinetis L series devices, which can simplify development across related product variants.
Typical applications include compact sensor nodes, portable health-monitoring products, industrial sensing modules, remote controls, low-power consumer accessories, and ingestible or wearable electronic products. Its 4 x 4 mm QFN format is especially beneficial when component placement, board area, and product weight must be minimized.
PCB design should follow the manufacturer pinout and land-pattern guidance, including treatment of the exposed center pad and the thermal and electrical requirements associated with the QFN package. Place decoupling capacitors close to the supply pins and preserve the exposed-pad copper and thermal-via arrangement recommended by NXP.
This page combines the exact device identity, operating characteristics, package information, sourcing guidance, application analysis, and engineering considerations needed to evaluate the MKL02Z32VFK4 for an embedded design.
드롭인 대체품: MKL02Z32VFK4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MKL02Z32VFK4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Supply Voltage, Operating Temperature Range, Product Type.
MKL02Z32VFG4
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MKL02Z32VFK4 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors |
| Product Type | 32-bit microcontroller (MCU) |
| Product Family | Kinetis KL02 |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8 bits) |
| 공급 전압 | 3.3 V |
| ADC Resolution | 12 bit |
| 동작 온도 범위 | -40 °C to +105 °C |
| 패키지 | 24-QFN (4 x 4 mm) |
| 핀 수 | 24 pins |
| 실장 유형 | Surface mount |
| Architecture | 32-bit RISC |
| Program Memory Type | Flash |
| Package Shipping Form | Tray |
| 수명 주기 상태 | Active |
| Automotive Qualification | AEC-Q100 |
MKL02Z32VFK4 tray 핀 구성 가이드
MKL02Z32VFK4(tray 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MKL02Z32VFK4.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MKL02Z32VFK4 적합 용도: 6 애플리케이션s: Compact Industrial Sensor Nodes, Portable Health-Monitoring Devices, Low-Power Remote Sensing, Portable Consumer Accessories, Ingestible Healthcare Sensing, Compact Control and Monitoring Modules.
Compact Industrial Sensor Nodes
The MKL02Z32VFK4 fits compact sensor nodes that combine acquisition, local filtering, and status reporting within a limited PCB area. Its 48 MHz Arm Cortex-M0+ core provides enough instruction throughput for peripheral handling and control logic, while the 12-bit ADC supports typical analog sensor interfaces. The 32 KB flash provides on-chip program storage, and the 24-QFN 4 x 4 mm package preserves placement flexibility in gateways, condition-monitoring nodes, and industrial sensing products.
추천
Portable Health-Monitoring Devices
The MKL02Z32VFK4 is appropriate for compact health-monitoring products in which board area and low-power 32-bit control are important. The Cortex-M0+ processor can run sensor sampling routines, threshold logic, and communication tasks, while the 12-bit ADC can interface with suitable analog front ends. Its 32 KB flash stores firmware and configuration data, and the 4 x 4 mm QFN package supports miniaturized assemblies such as wearable accessories and portable monitoring units.
추천
Low-Power Remote Sensing
The MKL02Z32VFK4 can serve as the control platform for a remote sensing node requiring a 3.3 V supply and limited embedded program storage. Its 48 MHz Cortex-M0+ core handles sampling schedules, sensor configuration, status logic, and packet preparation without occupying substantial board area. The 32 KB flash capacity and 4 x 4 mm QFN footprint are useful for distributed environmental monitors and compact wireless sensor endpoints where product size constrains component placement.
추천
Portable Consumer Accessories
The MKL02Z32VFK4 suits portable accessories where a full-size microcontroller package would increase board area or weight. A 48 MHz Cortex-M0+ core is suitable for button handling, LEDs, simple user interfaces, and low-rate data processing, while the 3.3 V supply supports many compact embedded systems. The 24-QFN 4 x 4 mm package enables dense placement in small wearables, personal accessories, and portable control products.
추천
Ingestible Healthcare Sensing
The MKL02Z32VFK4 is applicable to ingestible healthcare sensing concepts that prioritize a small footprint and embedded 32-bit control. The 32 KB flash can hold a focused firmware image, and the Cortex-M0+ core can supervise sensor sampling and wearable sensing routines. Its 4 x 4 mm QFN body supports miniaturized assemblies, although final suitability depends on the complete power budget, radio implementation, biocompatibility requirements, and product-specific regulatory validation.
추천
Compact Control and Monitoring Modules
The MKL02Z32VFK4 can form the core of a compact control module that monitors inputs and drives simple actuators or indicators. Its 48 MHz core supports responsive state-machine execution, the 12-bit ADC handles suitable analog monitoring channels, and the 3.3 V supply simplifies integration with common embedded power rails. The 24-QFN package reduces module area, making the device useful in small automation, appliance-control, and equipment-monitoring assemblies.
추천
추천 제품 요약
엔지니어링 참조 데이터: MKL02Z32VFK4 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MKL02Z32VFG4 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) - same package |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 48 MHz | 48 MHz |
| Flash Memory | 32 KB (32K x 8 bits) | 32 KB |
주요 차별점
- Compact 32-bit control in a 4 x 4 mm package (vs MKL02Z32VFG4)
- Documented wide-temperature operating range (vs MKL02Z32VFG4)
- Active manufacturer status (vs MKL02Z32VFG4)
설계 노트
Use the NXP 24-QFN land pattern without substituting a generic QFN footprint. Place input and decoupling capacitors close to their associated supply pins, route them directly to the device ground reference, and keep sensitive analog traces short. The exposed center pad and thermal-via pattern must follow the manufacturer drawing because the package combines limited lead area with a central thermal connection.
Preserve a continuous exposed-pad copper area and use the recommended thermal-via arrangement to reduce junction temperature under sustained processing load. Where space permits, connect the exposed pad to the ground plane according to the NXP package guidance. Validate the assembled board across its intended ambient range because the QFN’s small body limits heat dissipation.
Do not substitute a suffix solely because the package matches. Before using MKL02Z32VFG4 in place of MKL02Z32VFK4, compare the NXP ordering information for temperature grade, qualification, pin configuration, errata, and shipping form. Also confirm that the firmware image, clock setup, peripheral routing, and device configuration remain valid for the selected orderable part.
Keep the 3.3 V supply path short and provide local high-frequency bypass close to the MCU. Separate sensitive ADC inputs from switching or high-current paths, and connect analog and digital returns according to the application’s grounding strategy. Review oscillator, clock, and reset routing in the NXP reference documentation to avoid adding board area that defeats the compact 4 x 4 mm package benefit.
규정 준수 정보
The exact-product listing identifies the MKL02Z32VFK4 with AEC-Q100 automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statuses require confirmation from the manufacturer’s current compliance documentation.