NXP Semiconductors

MKL03Z16VFG4 - 48MHz Cortex-M0+ 16KB MCU | NXP

부품 번호: MKL03Z16VFG4 ✓ 활성
16-QFN (3 x 3 mm) Package 48 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

MKL03Z16VFG4 개요

NXP Semiconductors MKL03Z16VFG4 is an ultra-low-power 32-bit Kinetis KL03 microcontroller built around an Arm Cortex-M0+ processor operating up to 48 MHz. The device provides 16 KB of flash memory and is offered in a compact 16-QFN package measuring 3 x 3 mm. Its combination of a small footprint, low-power design, and Arm Cortex-M0+ processing makes it suitable for cost-sensitive embedded products in which code size, deterministic control, and compact PCB area are important.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The MKL03Z16VFG4 belongs to the Kinetis L product hierarchy: Arm Cortex-M0+ MCU, 32-bit microcontroller, embedded microcontroller, and semiconductor. The KL03 family is positioned as an entry point for designers moving from 8-bit systems to 32-bit Arm architecture while retaining compatibility with the broader Kinetis L software and tool ecosystem.

Key features include a 48 MHz maximum clock, 16 KB flash, and a 16-QFN surface-mount package. The Cortex-M0+ core supports an Arm Thumb instruction set and provides a compact software platform for event-driven embedded control. The ultra-low-power positioning of the KL03 family is useful in battery-operated or intermittently powered products where energy efficiency matters between active processing intervals. NXP describes the KL0x devices as software and tool compatible with other Kinetis L series devices.

Technically, the part integrates a 32-bit Arm Cortex-M0+ core with 16 KB of flash into a 3 x 3 mm QFN package, prioritizing compactness over large on-chip memory. This architecture is appropriate for control tasks, simple human-interface products, sensing nodes, and connected accessories that need more capability than an 8-bit MCU without requiring a high-performance Cortex-M processor. Designers should use the manufacturer pin-description and electrical-characteristics tables when assigning GPIO, power, clock, and debug connections.

Typical applications include compact sensor controllers, building and industrial control modules, motor-control auxiliaries, wearable accessories, and low-cost IoT nodes. In each case, the 48 MHz processing rate and 16 KB flash provide sufficient room for control firmware while the small QFN footprint supports space-constrained board layouts. Battery-powered designs can also benefit from the family's low-power orientation.

The principal design consideration is firmware and peripheral planning within a 16 KB flash budget. Keeping code compact, using supported pin assignments, and following the QFN layout and thermal recommendations are essential. Programmable I/O requirements should be checked early because allocating pins for external sensors, communications, programming, and debug functions can constrain the final board layout.

This product page combines the exact NXP device identity, package, memory and core specifications with same-brand replacement candidates, engineering comparison points, and practical integration guidance. It is designed to help engineers determine fit, verify package compatibility, and plan firmware and PCB resources before committing a compact embedded design to production.

드롭인 대체품: MKL03Z16VFG4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MKL03Z16VFG4 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Product Type, Series.

NXP Semiconductors
Package: 16-QFN (3x3 mm) with exposed pad
Series: Kinetis KL02 (KL0x)
비교 대상: MKL03Z16VFG4 →
NXP Semiconductors
Package: 16-QFN, 3 x 3 mm
Product Type: 32-bit ARM Cortex-M0+ ultra-low-power microcontroller
비교 대상: MKL03Z16VFG4 →

MKL03Z8VFG4

✅ 드롭인
NXP Semiconductors
📦 16-QFN (3 x 3 mm)
32-bit ARM Cortex-M0+ ultra-low-power microcontroller · Kinetis KL03 · 48 MHz · 32-bit ARM Cortex-M0+ · 8 KB · 2 KB · 1.8 V to 3.3 V · 1.8 V, 2.5 V, and 3.3 V

가격 문의

데이터시트 보기 →

MKL02Z16VFG4

✅ 드롭인
NXP Semiconductors
📦 16-QFN (3 x 3 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 16 KB (16K x 8) · 2 KB · 3.3 V · 16-QFN (3x3 mm) with exposed pad · Surface Mount

가격 문의

데이터시트 보기 →

MKL03Z16VFG4 최대 정격 & 전기적 특성

Manufacturer NXP Semiconductors
Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis L
Series KL03
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 48 MHz
Flash Memory 16 KB (16K x 8)
Data Bus 32-bit
패키지 16-QFN (3 x 3 mm)
실장 유형 Surface mount
Power Class Ultra-low-power Kinetis L device
Architecture Compatibility Software and tool compatible with Kinetis L series devices

MKL03Z16VFG4 16-qfn (3 x 3 mm) 핀 구성 가이드

MKL03Z16VFG4(16-qfn (3 x 3 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MKL03Z16VFG4의 16-qfn (3 x 3 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MKL03Z16VFG4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MKL03Z16VFG4 적합 용도: 6 애플리케이션s: Compact Sensor Controller, Low-Power IoT Node, Industrial Control Module, Battery-Powered Wearable Accessory, Motor-Control Auxiliary, Smart Home Endpoint.

🧩

Compact Sensor Controller

The MKL03Z16VFG4 fits compact sensor-controller boards because its Arm Cortex-M0+ core runs up to 48 MHz while the complete device occupies a 3 x 3 mm 16-QFN footprint. The 16 KB flash provides space for acquisition logic, filtering, threshold handling, diagnostics, and a small update function without moving to a larger microcontroller package. In a battery-powered node, the KL03 family's ultra-low-power positioning can help reduce energy use during idle periods. The principal constraint is firmware capacity, so measure the linked image and avoid adding code that pushes the application beyond the 16 KB budget.

🌐

Low-Power IoT Node

The MKL03Z16VFG4 is appropriate for a low-power IoT node that needs local sensing, state management, and communication-control logic. Its 48 MHz Cortex-M0+ processor can service interrupts and protocol tasks efficiently, while 16 KB of flash supports compact application code and configuration. The KL03 family's ultra-low-power design focus is valuable when the node spends most of its time asleep and wakes for short measurement intervals. Board-level current consumption still depends on the radio, sensor, regulator, and wake-up strategy, so energy profiling must include the complete powered system.

🏭

Industrial Control Module

The MKL03Z16VFG4 can serve as the local controller in a compact industrial module that coordinates sensors, discrete inputs, status indicators, and actuator commands. Its 32-bit Arm Cortex-M0+ architecture and 48 MHz clock provide deterministic handling of multiple peripheral events, while the small 16-QFN package preserves board area in space-constrained equipment. The target's 16 KB flash is sufficient for focused control firmware, but industrial designs should reserve memory for diagnostics, field updates, and safety-related checks. Confirm operating-temperature and supply-voltage limits against the specific device documentation before deployment.

📱

Battery-Powered Wearable Accessory

The MKL03Z16VFG4 suits a compact wearable accessory requiring event processing, haptic or indicator control, and low standby demand. Its 3 x 3 mm QFN package leaves more board area for the battery and sensor system, while the 48 MHz Cortex-M0+ core handles short bursts of processing efficiently. The KL03 family's ultra-low-power characterization supports this use, although average current must be evaluated with display, sensor, radio, and regulator loads included. Firmware planning should also preserve flash space for boot handling and future accessory features.

🔧

Motor-Control Auxiliary

The MKL03Z16VFG4 can handle auxiliary functions in a compact motor-control design, such as button decoding, position sensing, speed-limit logic, fault reporting, and communication bridging. The 48 MHz Cortex-M0+ core provides sufficient control bandwidth for these tasks while avoiding the footprint and cost of a larger MCU. Its 16 KB flash should be allocated carefully when the main motor algorithm executes elsewhere. Pin multiplexing, timer availability, and exact electrical operating limits must be checked in the manufacturer documentation before assigning the device to a safety- or timing-critical control path.

🏠

Smart Home Endpoint

The MKL03Z16VFG4 is suitable for a compact smart-home endpoint that manages local inputs, indicators, and a low-bandwidth communications link. The 32-bit processor architecture supports structured event-driven firmware, and 48 MHz operation gives adequate headroom for protocol parsing and device-state logic. Its 3 x 3 mm 16-QFN package supports dense terminal-node boards, and the ultra-low-power KL03 family is useful for battery-backed devices. The design should verify that the required UART, I2C, SPI, GPIO, and wake sources are available and that the 16 KB code budget accommodates the selected connectivity stack.

What is the MKL03Z16VFG4?
The MKL03Z16VFG4 is an active NXP Semiconductors Kinetis KL03 microcontroller with an Arm Cortex-M0+ processor, 16 KB of flash memory, a maximum clock frequency of 48 MHz, and a 16-QFN package. According to the NXP product page, the KL03 family provides an ultra-low-power migration path from 8-bit designs into the 32-bit Kinetis L portfolio. The device is intended for compact embedded products where processing performance, low power, and board area are primary design constraints.
What are the key specifications of MKL03Z16VFG4 that engineers should know?
The MKL03Z16VFG4 combines a 32-bit Arm Cortex-M0+ core, 48 MHz maximum operating frequency, 16 KB of flash, and a 3 x 3 mm 16-QFN package. The NXP product information also identifies it as part of the ultra-low-power Kinetis L family and notes software and tool compatibility with other Kinetis L series devices. These figures define its principal strengths: efficient embedded control, compactness, and a familiar 32-bit Arm software environment, although detailed RAM, GPIO, and peripheral limits require the device data sheet.
What is the operating frequency of MKL03Z16VFG4?
The MKL03Z16VFG4 operates up to 48 MHz. This maximum clock rate is identified in the NXP product listing and distributor device descriptions, while the part belongs to the Kinetis L family based on the Arm Cortex-M0+ core. For embedded control applications, the processor frequency provides useful headroom for interrupt handling, peripheral servicing, and compact protocol processing without moving to a higher-performance Cortex-M class.
How much flash memory does MKL03Z16VFG4 have?
The MKL03Z16VFG4 contains 16 KB, or 16K x 8 bits, of flash memory. The DigiKey device listing states this capacity explicitly, and the NXP family description positions the KL03 as an entry-level Kinetis L device. Firmware should therefore be size-checked against the application image, boot code, vector table, and update mechanism before production because 16 KB is a constrained code budget for feature-rich embedded systems.
What package does MKL03Z16VFG4 use?
The MKL03Z16VFG4 uses a 16-QFN package measuring 3 x 3 mm and is designed for surface-mount assembly. The package dimensions and pin count are identified in the NXP and distributor product descriptions. PCB designers should use the manufacturer land-pattern and pin-description tables when assigning power, ground, programming, clock, and GPIO functions; QFN thermal-pad treatment and exposed-pad soldering also need to follow the assembly guidance.
Where can I download the MKL03Z16VFG4 datasheet PDF?
The MKL03Z16VFG4 data-sheet information is available from the official NXP product page and through the indexed NXP PDF copy. Use the NXP page to access the latest supported document and revisions, and use the indexed PDF when a direct downloadable copy is required. The document contains the authoritative package drawing, complete pin descriptions, electrical characteristics, memory map, and peripheral information needed for PCB and firmware design.
Where can I find the MKL03Z16VFG4 pinout?
The authoritative MKL03Z16VFG4 pinout is shown in the pin-description and package-drawing sections of the NXP data sheet. The device uses a 16-QFN package, so a board layout should be checked against all 16 terminals, including power, ground, reset, debug, clock, and GPIO assignments. Use the pin table when assigning multiplexing options because several peripheral signals can share the same external pin.
Is MKL03Z16VFG4 suitable for low-power IoT devices?
The MKL03Z16VFG4 is suitable for low-power IoT control nodes when its sleep-mode behavior and peripheral configuration meet the product's duty cycle. NXP identifies the KL03 family as ultra-low-power and provides 16 KB of flash for compact firmware. Actual battery performance depends on the selected operating mode, wake-up source, sensor load, radio activity, and supply regulator, so current measurements should be taken with the complete application circuit rather than estimated from CPU frequency alone.
MKL03Z16VFG4 vs MKL03Z8VFG4 - which is better for compact firmware?
The MKL03Z16VFG4 is the better choice when firmware requires more than 8 KB of flash, while the MKL03Z8VFG4 may suit smaller code bases. Both are identified as Kinetis L KL03 devices in the comparison information, and the measurable memory difference is 16 KB versus 8 KB, a 100% increase for the target part. The lower-memory option can simplify device selection only if the final linked image, bootloader, and planned updates fit comfortably within its smaller budget.
MKL03Z16VFG4 vs MKL02Z16VFG4 - which is better for a new design?
The MKL03Z16VFG4 is generally preferable for a new Kinetis L design when the additional KL03 family resources are useful, while the MKL02Z16VFG4 remains a relevant option for designs validated around the KL02 family. Both candidates have 16 KB flash, so flash capacity alone does not distinguish them. The decision should also consider peripherals, GPIO, clock architecture, software support, and verified footprint compatibility rather than treating the shared memory value as proof of interchangeability.
When should I choose MKL03Z16VFG4 over MKL03Z8VFG4?
Choose the MKL03Z16VFG4 over the MKL03Z8VFG4 when linked firmware, application code, or future update capacity approaches or exceeds 8 KB. The target provides 16 KB of flash, twice the memory of the 8 KB alternative, while retaining the same Kinetis L KL03 positioning. The choice should be based on the measured firmware map and update strategy, not only on the nominal flash difference, because stack, heap, boot code, and configuration data also consume embedded flash.
What can replace the MKL03Z16VFG4?
The closest identified same-brand candidates are the MKL03Z8VFG4 and MKL02Z16VFG4, both listed for comparison against the MKL03Z16VFG4. The MKL03Z8VFG4 has 8 KB flash, 50% less memory than the target, while the MKL02Z16VFG4 has the same 16 KB flash but belongs to the KL02 series. Neither should be treated as an automatic drop-in replacement until pin assignments, peripherals, clocking, and software requirements are checked in the manufacturer documentation.
Is MKL03Z16VFG4 the same as MKL02Z16VFG4?
No. The MKL03Z16VFG4 belongs to the Kinetis KL03 series, while the MKL02Z16VFG4 belongs to the KL02 series. Both have 16 KB flash according to the comparison information, but equal memory does not make them identical. Family-specific peripherals, GPIO arrangements, clock behavior, and software requirements must be reviewed before deciding that either can replace the other on an existing PCB.
What is the best NXP equivalent for MKL03Z16VFG4?
The best identified NXP-family starting point is the MKL03Z8VFG4 because it remains in the KL03 family, but it provides only 8 KB flash compared with 16 KB in the MKL03Z16VFG4. The MKL02Z16VFG4 offers equal flash in the related KL02 family. No verified cross-brand equivalent with demonstrated pin-to-pin compatibility was identified, so use the Request a Quote form for sourcing support and validate any proposed replacement against the complete device requirements.
Where to buy MKL03Z16VFG4 online?
Use the Request a Quote form on this page to request current availability, minimum order quantity, and delivery terms for the exact MKL03Z16VFG4 orderable part. The manufacturer lists the device as active, and multiple catalog listings identify the exact 16-QFN package and 16 KB flash configuration. A quotation should specify the manufacturer part number, required quantity, and shipment destination so the exact device rather than a related memory or package variant is allocated.
What is the lead time for MKL03Z16VFG4?
The current production lead time for MKL03Z16VFG4 should be confirmed through the Request a Quote form on this page. NXP lists the exact device as active, but current scheduling can depend on order volume, packaging configuration, manufacturing conditions, and destination. Include the required quantity and target delivery date in the request, and avoid approving a schedule based on a related KL02 or KL03 variant.
Is MKL03Z16VFG4 in stock?
The exact MKL03Z16VFG4 is listed as active by NXP, but live stock should be confirmed through the Request a Quote form on this page. Catalog listings provide purchasing and availability references, while actual allocation may change with order volume and packaging. Specify the exact MPN MKL03Z16VFG4 and required quantity, because quantities shown for related KL03 or KL02 devices do not establish stock for this configuration.

엔지니어링 참조 데이터: MKL03Z16VFG4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MKL03Z16VFG4 for a compact embedded design that benefits from a 48 MHz Arm Cortex-M0+ processor, 16 KB flash, and a 3 x 3 mm 16-QFN package. Select the MKL03Z8VFG4 when the final linked firmware and update strategy fit comfortably within 8 KB, taking advantage of the shared KL03 software environment while accepting half the flash capacity. Consider the MKL02Z16VFG4 when an existing design uses the KL02 family and its verified peripherals, pin assignments, and clock configuration match the design, but do not assume interchangeability from the shared 16 KB flash value. For battery-operated products, include the complete peripheral load in power measurements and verify the selected sleep and wake behavior. For industrial or automotive-style requirements, confirm operating temperature, supply voltage, qualification, and functional-safety needs against the exact manufacturer documentation before releasing the design.

대체품과의 비교

파라미터 이 제품 MKL03Z8VFG4 MKL02Z16VFG4
Package 16-QFN (3 x 3 mm) 16-QFN (3 x 3 mm) 16-QFN (3 x 3 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Family Kinetis L KL03 Kinetis L KL03 Kinetis L KL02
Maximum CPU Frequency 48 MHz 48 MHz 48 MHz
Flash Memory 16 KB 8 KB 16 KB
Data Width 32-bit 32-bit 32-bit
Software Ecosystem Compatible with Kinetis L series software and tools Compatible with Kinetis L series software and tools Compatible with Kinetis L series software and tools

주요 차별점

  • Double the flash memory of the identified KL03 alternative (vs MKL03Z8VFG4)
  • Same nominal memory and clock as the related KL02 candidate (vs MKL02Z16VFG4)
  • Compact 3 x 3 mm surface-mount implementation (vs MKL03Z8VFG4)

설계 노트

Assign the QFN land pattern from the manufacturer package drawing and follow its exposed-pad solder requirements. Keep the 16-QFN footprint free of copper obstructions under the package, verify courtyard clearance for adjacent components, and reserve the ground and power routing needed by the selected pin assignments. Because the package is only 3 x 3 mm, use an assembly-capable PCB design rule set and inspect the finished board for bridging risk around fine-pitch terminals.

Plan the supply network for the exact MKL03Z16VFG4 configuration before routing. Place the required input and decoupling capacitors close to their designated pins, provide a low-impedance return path, and keep switching-regulator and digital switching-node copper away from sensitive analog inputs. For a battery-powered design, measure sleep current, wake-up current, and active current across the intended temperature range rather than relying only on the 48 MHz operating frequency or the ultra-low-power family designation.

Do not select a replacement from flash capacity or package size alone. Validate every used pin, alternate-function mapping, timer, serial interface, clock source, reset connection, programming interface, and wake-up source. The MKL03Z8VFG4 has 8 KB flash, while the MKL02Z16VFG4 belongs to a different KL series despite sharing the 16 KB capacity. A PCB swap or firmware port should therefore include a complete electrical, pin, peripheral, and software review.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

NXP lists the device as active. Specific environmental and material-compliance declarations should be confirmed on the current manufacturer product page or applicable declarations.

데이터 검증일: 2026-11-19 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MKL03Z16VFG4 datasheet MKL03Z16VFG4 pinout MKL03Z16VFG4 datasheet pdf NXP MKL03Z16VFG4 MKL03Z16VFG4 48MHz Cortex-M0+ MKL03Z16VFG4 16-QFN MKL03Z16VFG4 equivalent MKL03Z16VFG4 replacement MKL03Z16VFG4 vs MKL03Z8VFG4 MKL03Z16VFG4 price MKL03Z16VFG4 stock MKL03Z16VFG4 application circuit

관련 부품 & 용어

NXP Semiconductors MKL03Z16VFG4 MKL03Z8VFG4 MKL02Z16VFG4 Arm Cortex-M0+ Kinetis L KL03 KL02 32-bit microcontroller embedded microcontroller semiconductor 16 KB flash memory 48 MHz 16-QFN QFN package family surface mount SMD ultra-low-power MCU IoT node sensor controller industrial control module smart-home endpoint Arm Thumb instruction set
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기