MPC8360ZUAJDGA - PowerQUICC II Pro MPU, 533MHz e300, 740-TBGA | NXP
부품 번호: MPC8360ZUAJDGA ⚠ 최종 구매MPC8360ZUAJDGA 개요
A PowerQUICC (pronounced "power-quic") processor is a family of communications microprocessors originating at Motorola Semiconductor (later Freescale, now NXP) that combines a Power Architecture CPU with integrated communications peripherals such as Ethernet MACs, ATM controllers, HDLC, TDM, and PCI. Within the broader taxonomy, the MPC8360 sits as a microprocessor IC -> embedded microprocessor -> communications MPU -> PowerQUICC II Pro family -> semiconductor IC. Its primary role in a system hierarchy is to consolidate CPU plus connectivity into a single SoC, eliminating external protocol-handling ASICs.
Key differentiating features of the MPC8360ZUAJDGA include its 533 MHz e300 core with 32 KB L1 instruction cache and 32 KB L1 data cache, hardware QUICC Engine technology for accelerated communications, integrated DDR1/DDR2 memory controller with ECC support, dual 10/100/1 Gb Ethernet, USB 2.0 host/device, PCI 2.2 bus interface, and TDM/ATM serial interfaces. Operating temperature range spans 0 C to 105 C (TA = -40 C to +125 C for the silicon), making it suitable for thermally managed equipment enclosures.
Architecturally, the MPC8360E family uses a Harvard-style e300 core with separate instruction and data MMUs, a unified internal bus, and a multi-channel QUICC Engine subsystem that offloads protocol processing from the CPU. The 740-TBGA package provides the pin density required for the parallel DDR, PCI, Ethernet GMII, and QUICC Engine serial interfaces, and is paired with a thermal pad for board-mounted heat-spreading.
Typical applications include SME (small-to-medium enterprise) routers, low-end DSLAMs, IP-PBX systems, line cards for multiservice access nodes, and industrial wired backhaul platforms. In these applications, the integrated communications peripherals allow a single MPU plus external PHYs and DSPs to form a complete line card or CPE platform.
When designing with this part, allocate proper thermal dissipation because the 740-TBGA dissipates significant power at 533 MHz; design stack-up for matched-impedance DDR2 traces, 50 ohm controlled-impedance Ethernet, and 100 ohm differential QUICC Engine serdes; and verify DDR2 IBIS models against the chosen DIMM topology.
This page synthesizes distributor stock and lead-time data, drop-in alternative MPNs from the MPC83xx family, and practical PCB/thermal design notes that complement the manufacturer hardware specifications document.
드롭인 대체품: MPC8360ZUAJDGA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8360ZUAJDGA (동일 폼 팩터 및 풋프린트) — 차이점: Ethernet, Mounting Type, Operating Temperature, Memory Controller, PCI Interface.
MPC8358ECVVADDEA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8358ECZUAGDGA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8360ECZUAJDGA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8360EZUADDH
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8360ECVVAJDGA
✅ 드롭인가격 문의
데이터시트 보기 →MPC8360ZUAJDGA 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | PowerQUICC II Pro, MPC83xx |
| Core Processor | PowerPC e300 |
| Core Architecture | Power Architecture, 32-bit |
| Number of Cores | 1 |
| Core Clock Speed | 533 MHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| Process Technology | 0.13 micron CMOS |
| 패키지 | 740-TBGA (37.5 x 37.5 mm) |
| 실장 유형 | Surface Mount (T-BGA) |
| Memory Controller | DDR1 / DDR2 with ECC |
| Ethernet | 10/100/1 GbE (GMII/RGMII) |
| PCI Interface | PCI 2.2 (32-bit, 66 MHz) |
| USB Interface | USB 2.0 (host/device) |
| Serial Interfaces | TDM, ATM, HDLC (QUICC Engine) |
| Supply Voltage Rails | 1.8 V / 2.5 V / 3.3 V |
| 동작 온도 | 0 C to +105 C |
| Encryption | Non-encryption (no SEC) |
MPC8360ZUAJDGA 740-tbga (37.5 x 37.5 mm) 핀 구성 가이드
MPC8360ZUAJDGA(740-tbga (37.5 x 37.5 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8360ZUAJDGA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8360ZUAJDGA 적합 용도: 6 애플리케이션s: SME / Enterprise Routers, Low-End DSLAM Line Cards, IP-PBX / VoIP Gateways, Industrial Wired Backhaul, Wireless LAN / Wi-Fi Access Point Controllers, Network Attached Storage (NAS) Controllers.
SME / Enterprise Routers
The MPC8360ZUAJDGA fits SME routers because it integrates a 533 MHz PowerPC e300 core with hardware-accelerated QUICC Engine for IP forwarding, a GbE MAC for WAN uplink, and a DDR2 controller for routing tables. Designers typically pair it with a GbE copper PHY, 1-2 GB of DDR2, and external SPI flash for boot. Compared with software-only routing on a generic SoC, the QUICC Engine offloads protocol processing and improves packets-per-second by 2-3x at the same CPU clock.
추천
Low-End DSLAM Line Cards
The MPC8360ZUAJDGA's combination of QUICC Engine TDM/ATM serdes, GbE uplink, DDR2 controller, and PCI expansion makes it well-suited for low-end DSLAM line cards handling 16-64 subscriber lines per slot. Its 533 MHz CPU handles control traffic while the QUICC Engine executes HDLC framing for ADSL2+/VDSL2 bonding without taxing the core. Typical designs use 256 MB-1 GB DDR2 and pair the MPU with an external line-driver ASIC over PCI.
추천
IP-PBX / VoIP Gateways
IP-PBX and VoIP gateway platforms benefit from the MPC8360ZUAJDGA's integrated TDM interfaces (for legacy PSTN connectivity), GbE, USB for management, and the QUICC Engine's HDLC/TDM offload. The 533 MHz e300 handles SIP/RTP processing while the QUICC Engine manages TDM timeslot allocation and HDLC framing for PRI/BRI trunks. Designers typically add 512 MB DDR2 plus a USB-to-Flash controller for local storage.
추천
Industrial Wired Backhaul
The MPC8360ZUAJDGA's industrial operating temperature range (0 C to +105 C junction), GbE, USB, PCI, and DDR2 support make it applicable to industrial wired backhaul nodes in factory automation or substation communications. The combination of deterministic QUICC Engine TDM and GbE uplink supports protocols like PRP/HSR or legacy serial fieldbus bridging. The 740-TBGA package requires a 6-8 layer PCB with thermal vias under the BGA thermal pad.
추천
Wireless LAN / Wi-Fi Access Point Controllers
The MPC8360ZUAJDGA can serve as the host MPU in mid-range enterprise Wi-Fi access point controllers, where it manages GbE uplink, multiple PCI-attached 802.11 radios, and DDR2-based packet buffers. The QUICC Engine accelerates 802.11 MAC time-critical tasks. Pair the MPU with an 802.11ac/ax chipset over mini-PCI or PCIe-bridge-type cells, plus external DDR2 for packet queuing.
추천
Network Attached Storage (NAS) Controllers
Mid-range SMB NAS controllers can use the MPC8360ZUAJDGA as the main processor, leveraging its GbE, PCI expansion for SATA controllers, DDR2 support, and QUICC Engine for iSCSI or NFS offload. The 533 MHz CPU plus hardware crypto (when paired with the SEC-equipped MPC8360ECZUAJDGA variant) supports encrypted file-system throughput. Typical designs add 512 MB-1 GB DDR2 ECC memory for reliability.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8360ZUAJDGA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8358ECVVADDEA | MPC8358ECZUAGDGA | MPC8360ECZUAJDGA | MPC8360EZUADDH | MPC8360ECVVAJDGA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 740-TBGA (37.5x37.5) | 740-TBGA (37.5x37.5) - same | 740-TBGA (37.5x37.5) - same | 740-TBGA (37.5x37.5) - same | 740-TBGA (37.5x37.5) - same | 740-TBGA (37.5x37.5) - same |
| Core | PowerPC e300 | PowerPC e300 | PowerPC e300 | PowerPC e300 | PowerPC e300 | PowerPC e300 |
| Core Clock | 533 MHz | Lower (MPC8358E tier, ~400 MHz) | Lower (MPC8358E tier) | Same 533 MHz (8360E family) | Same 8360E family speed | 8360E family speed grade |
| Encryption (SEC) | No | Yes (SEC present on MPC8358E) | Yes (SEC present on MPC8358E) | Yes (SEC present on MPC8360E) | Yes (8360E family adds SEC) | Yes (8360E family adds SEC) |
| Memory Controller | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC | DDR1/DDR2 with ECC |
| Ethernet | 10/100/1 GbE | 10/100/1 GbE | 10/100/1 GbE | 10/100/1 GbE | 10/100/1 GbE | 10/100/1 GbE |
| QUICC Engine (TDM/ATM/HDLC) | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Pin-compatible family breadth in identical 740-TBGA (vs MPC8358E tier (MPC8358ECVVADDEA / MPC8358ECZUAGDGA))
- Hardware encryption upgrade path within same package (vs MPC8360ZUAJDGA (this part, no SEC))
- Integrated communications peripherals reduce BOM (vs Generic Power Architecture SoC without QUICC Engine)
- DDR2 with ECC support for telecom reliability (vs Lower-cost DDR1-only designs)
설계 노트
Estimated: at 533 MHz core clock with 1.8 V core supply, the MPC8360ZUAJDGA dissipates roughly 2-3 W typical; a 6-8 layer PCB with a thermal pad and 9 thermal vias directly under the 740-TBGA is required to keep junction temperature below 105 C. Use the manufacturer-provided junction-to-ambient and junction-to-case thermal resistance figures plus worst-case ambient (typically 70 C inside sealed enclosures). Without thermal vias, expect a 20-30 C rise in junction temperature that can push the part out of its 0 C to +105 C operating window.
Route DDR2 traces as 50 ohm controlled-impedance single-ended with matched lengths within the byte lanes (typically +/- 25 mil). Use 100 ohm differential for QUICC Engine serial and Ethernet GMII/RGMII. Keep BGA breakout vias on inner layers with back-drilling to reduce stubs. Provide at least 4 decoupling capacitors per voltage rail (1 uF, 100 nF, 10 nF, 1 nF) placed as close as possible to the corresponding BGA balls, plus bulk capacitors on each supply plane.
Place the DDR2 chips or DIMM socket within 25 mm of the MPC8360ZUAJDGA to meet DDR2-533 timing. Provide a guard trace around the GMII/RGMII Ethernet signals and keep them on a separate layer from QUICC Engine serdes to avoid crosstalk. Use length-matched differential pairs for Ethernet GMII transmit clock and data. The 1.8 V core plane should be a solid island with high-frequency decoupling placed within 5 mm of the BGA core balls.
Implement strict power sequencing: 3.3 V first, then 2.5 V, then 1.8 V with monotonic ramp. The MPC8360ZUAJDGA may latch-up if the core rail is energized before I/O rails. Use a supervisor IC or sequencer with adjustable delays. Place a Schottky diode or ideal-diode controller on each rail to handle inrush during hot-plug or DC-bus transients in telecom line cards.
Do not confuse the ZUAJDGA (non-encryption) with the ZUECZUAJDGA or EZUAJDGA variants that include SEC - firmware expecting SEC APIs will hang. Also do not assume all MPC8360E family parts share identical DDR2 timing - the silicon revision (Rev 1 vs Rev 2.x) requires checking the errata document. Avoid placing the 740-TBGA on a 4-layer PCB - insufficient ground/plane coupling causes SI issues for DDR2 at 266 MHz data rate.
규정 준수 정보
RoHS / REACH / lead-free status not explicitly stated in the verified web data for MPC8360ZUAJDGA. AEC-Q100 not applicable (telecom/industrial MPU, not automotive-grade). Designers should request the latest material declaration from NXP for compliance confirmation.