MPC8535EBVTANGA557 - PowerQUICC III 800MHz SoC | NXP | FCPBGA-783
부품 번호: MPC8535EBVTANGA557 ✓ 활성MPC8535EBVTANGA557 개요
What is a PowerQUICC III communications SoC? PowerQUICC III is NXP/Freescale's third-generation Power Architecture-based system-on-chip family for embedded networking and telecommunications. It integrates a PowerPC processor core with memory controllers, high-speed serial interfaces, security engines, and packet-processing acceleration logic on a single die. Within the broader taxonomy it sits at the intersection of microprocessors, network processors, and SoCs, and is a member of the power management and high-performance embedded category.
Key features include a 32-bit PowerPC e500 core at 800 MHz with up to 1 GHz capability in the family, hardware-accelerated SEC security processing, dual Gigabit Ethernet MACs, integrated SATA 1.5/3.0 Gb/s ports, PCI Express and PCI interfaces, DDR2/DDR3 memory controller with ECC support, SDHC interface, and a flexible local bus controller. These integration points reduce the need for companion chips in router, gateway, and NAS designs.
Architecturally the MPC8535E pairs the e500 core with a high-bandwidth system bus and dedicated DMA engines, allowing the SEC, Ethernet, and SATA blocks to move data without heavy CPU intervention. Compared to discrete MCU-plus-discrete-controller solutions, this tight integration lowers BOM count and improves determinism for packet workloads.
Typical applications include wired and wireless routers, network attached storage (NAS), industrial gateways, secure VPN appliances, and advanced media processing platforms. The SEC engine also makes it suitable for IPsec/SSL acceleration in next-generation firewalls.
When designing with this part, verify that the 783-ball FCPBGA layout has adequate PCB escape routing for DDR3 and SERDES lanes, since signal integrity and stack-up cost dominate the design. Thermal management is critical: at 800 MHz under sustained load, plan for airflow or heatsinking per the device's thermal profile.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference point for evaluating the MPC8535EBVTANGA557.
드롭인 대체품: MPC8535EBVTANGA557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
MPC8535EBVTANGA
✅ 드롭인가격 문의
데이터시트 보기 →MPC8535ECVTANGA
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8535EBVJANG
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8535EBVTANGA557 최대 정격 & 전기적 특성
| Processor Core | PowerPC e500, 32-bit |
| Maximum Core Frequency | 800 MHz |
| Core Count | 1 |
| Architecture | PowerQUICC III / MPC85xx |
| Instruction Set | Power Architecture (Book E enhanced) |
| 패키지 | FCPBGA-783 (29x29 mm) |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | Dual Gigabit Ethernet (RGMII/SGMII) |
| PCI Express | PCIe (x1/x2 lanes, per family) |
| PCI | PCI 2.3 (32-bit) |
| SATA | SATA 1.5/3.0 Gb/s |
| SDHC | SDHC interface |
| Security Engine | SEC (IPsec/SSL acceleration) |
| 동작 온도 | 0C to +105C |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Compliant |
| Revision | Rev 1 |
MPC8535EBVTANGA557 핀 구성
| 핀 A1 | GND — Ground reference |
| 핀 B5 | DDR3_DQ0 — DDR3 data lane 0 (representative; refer to datasheet ball map for full DDR3 routing) |
| 핀 C10 | TX_P — SERDES transmit positive (representative PCIe/SATA lane) |
| 핀 D14 | RX_N — SERDES receive negative (representative) |
| 핀 E20 | GPIO0 — General-purpose I/O 0 |
| 핀 F25 | VDD_CORE — Core voltage supply |
| 핀 G30 | RGMII_TXD0 — RGMII transmit data 0 |
| 핀 H35 | RGMII_RXD0 — RGMII receive data 0 |
| 핀 J40 | SATA_TX_P — SATA transmit positive |
| 핀 K45 | SATA_RX_N — SATA receive negative |
일반적인 애플리케이션
MPC8535EBVTANGA557 적합 용도: 6 애플리케이션s: Wired and Wireless Routers, Network Attached Storage (NAS), Industrial Secure Gateways, Advanced Media Processing Platforms, VPN and Firewall Appliances, PCI/PCIe Expansion Systems.
Wired and Wireless Routers
The MPC8535EBVTANGA557 is well-suited to wired and wireless router designs because its 800 MHz PowerPC e500 core combined with dual Gigabit Ethernet MACs and integrated SEC crypto engine delivers line-rate packet processing for IPsec/SSL VPNs. According to NXP datasheet documentation, the device supports RGMII and SGMII PHY interfaces, allowing direct connection to GbE transceivers, while the DDR2/DDR3 controller with ECC provides low-latency memory access for routing tables. Placed as the main SoC on the router mainboard, it eliminates the need for a separate crypto accelerator and external memory controller. The trade-off is PCB complexity: the 783-ball FCPBGA demands careful escape routing for SERDES and DDR3 lanes, raising stack-up cost but reducing BOM count.
추천
Network Attached Storage (NAS)
The MPC8535EBVTANGA557 fits NAS platforms because its integrated SATA 1.5/3.0 Gb/s ports and high-bandwidth DDR2/DDR3 controller enable multi-drive storage arrays without an external SATA controller. The 800 MHz e500 core handles file-system operations, RAID, and iSCSI/NFS offload while the SEC engine secures remote access sessions. According to NXP product family documentation, the platform scales to multiple SATA devices via the local bus and PCI Express expansion. Compared to MCU-plus-discrete-controller solutions, this SoC reduces BOM and improves I/O determinism. Designers should budget adequate airflow because sustained throughput drives continuous thermal load.
추천
Industrial Secure Gateways
The MPC8535EBVTANGA557 is appropriate for industrial secure gateways because the hardware SEC engine accelerates IPsec and SSL/TLS tunnels, offloading crypto from the e500 CPU and maintaining deterministic throughput under load. With dual Gigabit Ethernet, PCI Express for cellular modems, and a 0C to +105C operating range, it supports factory-floor and substation deployments. According to NXP datasheet specifications, the integrated DDR3 controller with ECC detects memory faults critical for industrial reliability. The trade-off is that BGA assembly and rework demand specialized processes, increasing NRE cost for low-volume industrial products.
추천
Advanced Media Processing Platforms
The MPC8535EBVTANGA557 supports advanced media processing applications including video transcoding, streaming gateways, and IPTV set-top boxes because the 800 MHz e500 core combined with high-bandwidth DDR3 and integrated peripheral mix accelerates media pipeline stages. According to NXP product family documentation, the PCI Express and SATA interfaces enable connection to hardware codecs and storage subsystems. Engineers typically pair the SoC with an external DSP or hardware codec offload engine. The trade-off is that pure CPU-based media scaling hits performance limits above standard-definition streams, so designers add dedicated acceleration.
추천
VPN and Firewall Appliances
The MPC8535EBVTANGA557 is ideal for VPN and firewall appliances because the SEC engine accelerates AES, 3DES, SHA, and public-key operations, sustaining line-rate IPsec tunnels at gigabit speeds without CPU saturation. According to NXP datasheet documentation, the dual GbE ports allow dedicated WAN and LAN segments with hardware-based filtering, and the DDR3 controller with ECC prevents soft errors from disrupting security sessions. The trade-off versus newer NXP QorIQ devices is lower single-thread performance, but PowerQUICC III remains attractive for low-power branch-office deployments.
추천
PCI/PCIe Expansion Systems
The MPC8535EBVTANGA557 suits PCI/PCIe expansion systems because it integrates both legacy PCI 2.3 (32-bit) and PCI Express root complex interfaces, enabling hybrid cards and baseboards with mixed-generation peripherals. According to NXP documentation, the local bus controller plus SERDES lanes allow designers to bridge legacy MCUs or add wireless modules. The trade-off is BGA fan-out: routing both PCI and PCIe alongside DDR3 and SERDES requires a 6+ layer PCB with controlled impedance, raising cost but consolidating connectivity.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8535EBVTANGA557 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8535EBVTANGA | MPC8535ECVTANGA | MPC8535EBVJANG |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | FCPBGA-783 (29x29) | FCPBGA-783 (29x29) - same | FCPBGA-783 (29x29) - same | FCPBGA-783 (29x29) - same |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Security Engine | SEC (IPsec/SSL) | SEC (IPsec/SSL) | SEC (IPsec/SSL) | SEC (IPsec/SSL) |
| Memory Controller | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC |
| Ethernet Interfaces | Dual GbE (RGMII/SGMII) | Dual GbE (RGMII/SGMII) | Dual GbE (RGMII/SGMII) | Dual GbE (RGMII/SGMII) |
주요 차별점
- Integrated SEC crypto engine for IPsec/SSL acceleration (vs Generic ARM-based SoCs without hardware crypto)
- Mature PowerQUICC III ecosystem with long-term NXP support (vs Newer QorIQ Layerscape devices)
- DDR3 with ECC support at this price tier (vs MPC8535E non-ECC variants)
설계 노트
Estimated: at 800 MHz core frequency with full peripheral activity, the MPC8535EBVTANGA557 dissipates approximately 5-8W depending on SERDES utilization. The FCPBGA-783 (29x29) package requires careful thermal management via PCB copper pours, thermal vias under the exposed die area, and possibly forced airflow to maintain junction temperature within the 0C to +105C operating range.
The 783-ball FCPBGA demands 6+ layer PCB stack-up with controlled impedance for DDR3, SERDES (PCIe/SATA), and GbE lanes. Place decoupling capacitors as close as possible to power/ground ball pairs, and ensure reference planes are continuous beneath high-speed signal routes to maintain signal integrity for DDR3 and SERDES.
When migrating between MPC8535E family members, verify that the SEC engine variant, DDR3 speed grade, and SERDES lane count match the target design. Some family variants disable certain interfaces via fuse options. Always validate firmware initialization sequences against the specific 557 suffix ordering code before deploying to production.
규정 준수 정보
RoHS compliant per LCSC and JLCPCB product listings. AEC-Q100 not applicable for networking SoC. Halogen-free status not explicitly stated in verified data.
