MPC8543ECPXAQGD557 - PowerQUICC III 1GHz MPU | NXP | 783-FCPBGA
부품 번호: MPC8543ECPXAQGD557 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $155.86 | $155.86 |
| 10 | $142.5 | $1,425.00 |
| 100 | $128.2 | $12,820.00 |
| 500 | $115.4 | $57,700.00 |
| 1,000 | $102.85 | $102,850.00 |
MPC8543ECPXAQGD557 개요
A microprocessor (MPU) is a single-chip CPU that integrates arithmetic logic, control logic, and on-chip caches. The PowerPC e500 core used in the MPC85xx family implements the Book E instruction set with signal-processing extensions, positioning it as a high-performance embedded MPU. Within the broader taxonomy, this device sits at: MPU -> application processor -> embedded processor -> microprocessor -> semiconductor. This hierarchy helps contextualize its role in advanced embedded designs targeting data-plane and control-plane workloads.
Key features include a 32-bit PowerPC e500 core at 1 GHz core frequency, 783-ball FCPBGA flip-chip packaging for high signal/power integrity, and an extended temperature range of -40C to +105C for industrial and telecom environments. The device integrates DDR1/DDR2 memory controllers, multiple Gigabit Ethernet MACs, PCI Express interfaces, and RapidIO serial links, enabling single-chip designs for routers, switches, and wireless baseband controllers. A sophisticated on-chip coherency fabric connects the core to peripherals while maintaining deterministic latency.
The MPC8543ECPXAQGD557 uses a 90 nm CMOS process with copper interconnect and a flip-chip BGA substrate that enables very high I/O bandwidth. Hardware-assisted packet processing engines accelerate CRC, table lookup, and queue management, which significantly offload the e500 core. The integrated SEC 3.0 cryptographic engine supports IPSec, SSL/TLS, and SRTP acceleration for secure networking equipment.
Typical applications include enterprise routers and switches, multiservice access equipment, LTE/3G baseband processing, industrial control systems, and military/aerospace embedded computing. The wide operating temperature range and long-term reliability make it well suited for carrier-grade network infrastructure.
When designing with this MPU, ensure the PCB accommodates the 783-ball flip-chip BGA with proper microvia stack-up and matched-length high-speed serial routing. The platform reference designs from NXP provide validated DDR2 layouts, SerDes channel tuning, and power-sequencing schematics that should be followed closely.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on generic datasheet portals, providing engineers with verified cross-reference data for sourcing decisions.
드롭인 대체품: MPC8543ECPXAQGD557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8543EVPXAQGD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8543ECPXAUJD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8543ECPXAURD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8543EVPXAURD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8543ECPXAQGD557 최대 정격 & 전기적 특성
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| 데이터 버스 폭 | 32 bit |
| Core Frequency | 1 GHz |
| Series | MPC85xx (PowerQUICC III) |
| 패키지 / 케이스 | 783-BBGA, FCBGA (Flip-Chip) |
| Supplier Device Package | 783-FCPBGA (29 x 29 mm) |
| I/O Voltage | 1.8 V |
| 동작 온도 | -40C to +105C (TA) |
| Product Status | Active |
| 실장 유형 | Surface Mount (BGA) |
| On-Chip Cache | L1 + L2 coherent |
| Memory Controller | DDR1/DDR2 (integrated) |
| Ethernet MAC | Multi-Gigabit (integrated) |
| RoHS 상태 | Compliant |
MPC8543ECPXAQGD557 783-fcpbga (29 x 29 mm) 핀 구성 가이드
MPC8543ECPXAQGD557(783-fcpbga (29 x 29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8543ECPXAQGD557.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8543ECPXAQGD557 적합 용도: 7 애플리케이션s: Enterprise Router Control Plane, Multi-Gigabit Ethernet Switch, Wireless Base Station Baseband, Network-Attached Storage (NAS), Industrial Automation Controller, Secure VPN/Firewall Appliance, Aerospace Embedded Computing.
Enterprise Router Control Plane
The MPC8543ECPXAQGD557's 1 GHz PowerPC e500 core, integrated multi-Gigabit Ethernet MACs, and RapidIO serial interfaces make it ideal for control-plane packet processing in enterprise routers. The device handles routing-table management, OSPF/BGP timer maintenance, and SNMP control traffic offload from the main forwarding plane, while the integrated SEC 3.0 engine accelerates IPSec operations for site-to-site VPN tunnels without burdening the e500 core. With -40C to +105C industrial operating range and 783-FCPBGA package allowing dense PCB layouts, this MPU fits fanless carrier-grade chassis designs.
추천
Multi-Gigabit Ethernet Switch
Layer 2/3 managed switches benefit from the MPC8543ECPXAQGD557's integrated Gigabit Ethernet MACs and PCI Express lanes to expand towards 10G uplinks via external PHYs. The on-chip DDR1/DDR2 controller feeds packet-buffer memory at memory bandwidth ~6.4 GB/s (DDR2-800), enabling wire-speed table lookups. The 1 GHz e500 core runs Linux/uClinux or VxWorks for routing-stack offload, making this MPU a powerful control-coprocessor paired with a dedicated switching fabric ASIC for line-rate L2 forwarding.
추천
Wireless Base Station Baseband
Pico-cell and small-cell LTE/WCDMA baseband processing is achievable with the MPC8543ECPXAQGD557 thanks to its PowerPC e500's integrated Altivec-style signal-processing extensions. The SERDES lanes (up to 3.125 GHz) connect to RF front-end ICs, while the ECC-protected DDR2 interface handles high-bandwidth baseband sample streams. Industrial temperature grade -40C to +105C supports outdoor small-cell deployments where thermal management is constrained.
추천
Network-Attached Storage (NAS)
Mid-range enterprise NAS controllers can leverage the MPC8543ECPXAQGD557's Gigabit Ethernet MACs, PCI Express for SAS/SATA host-bus adapters, and integrated DDR2 controller for L1/L2 cache-amplified I/O. The integrated SEC 3.0 engine accelerates AES-128/256 used by NAS encryption-at-rest, and the 1 GHz core runs OpenWRT/embedded Linux distributions from NAND/NOR flash banks. The 783-FCPBGA package fits NAS head-unit form factors with passive heatsink cooling.
추천
Industrial Automation Controller
Deterministic real-time control in factory automation benefits from the MPC8543ECPXAQGD557's hardware-fabric coherency, predictable interrupt latency, and RapidIO serial links to DSPs/FPGAs. The device's industrial temperature range (-40C to +105C) is well matched to factory-floor conditions, while integrated PCI Express and Ethernet support machine-to-machine (M2M) connectivity and fieldbus gateways (EtherCAT, PROFINET) running on VxWorks or RTLinux. Built-in ECC on the DDR controller mitigates soft errors in industrial environments.
추천
Secure VPN/Firewall Appliance
The MPC8543ECPXAQGD557 is well suited for small/medium-business VPN/firewall appliances where its SEC 3.0 crypto engine accelerates IPSec ESP encryption/decryption at line-rate Gigabit throughput. The on-chip multi-Gigabit Ethernet MACs provide direct WAN/LAN connectivity without external switch devices. The 1 GHz PowerPC e500 runs embedded firewalls (Linux/iptables, OpenBSD/pf) and performs deep-packet inspection for stateful inspection at sub-Gigabit rates. 783-FCPBGA package enables compact 1U rackmount form factors.
추천
Aerospace Embedded Computing
The MPC8543ECPXAQGD557's extended temperature range and high reliability make it suitable for aerospace and defense embedded computing such as flight-data recorders, mission computers, and avionics databuses. Its integrated Ethernet, RapidIO, and PCI Express interfaces connect to sensor arrays, while the PowerPC e500 architecture has a long heritage in MIL-spec deterministic computing. The 783-FCPBGA substrate withstands vibration and thermal cycling better than plastic-leaded packages, supporting DO-160 and MIL-STD-810 testing scenarios.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8543ECPXAQGD557 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8543EVPXAQGD | MPC8543ECPXAUJD | MPC8543ECPXAURD | MPC8641DVT1062D |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) | 783-FCPBGA (29x29 mm) | 1023-FCPBGA (37.5x37.5 mm) |
| Core | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e600 dual-core |
| Core Frequency | 1.0 GHz | 1.0 GHz | 800 MHz | 1.0 GHz | 1.062 GHz |
| Number of Cores | 1 | 1 | 1 | 1 | 2 |
| Series | MPC85xx (PowerQUICC III) | MPC85xx (PowerQUICC III) | MPC85xx (PowerQUICC III) | MPC85xx (PowerQUICC III) | MPC86xx |
| I/O Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
주요 차별점
- Single integrated MP-comms platform reduces BOM cost (vs MPC8641DVT1062D)
- Integrated SEC 3.0 hardware crypto accelerator (vs MPC8543ECPXAUJD)
- Industrial temperature range without premium pricing (vs MPC8641DVT1062D)
설계 노트
Estimated: The 783-FCPBGA (29 mm x 29 mm) with 1 mm pitch requires a 6-layer minimum PCB stack-up using laser-drilled microvias and matched-impedance traces for the SERDES lanes. Reference NXP application note AN3738 for the recommended DDR2 topology and SerDes channel routing. Place decoupling capacitors within 5 mm of each Vdd/GND pair, using a combination of 100 nF MLCCs for high-frequency and 22 uF tantalum for bulk decoupling.
Estimated: At 1 GHz with full SERDES activity, the MPC8543ECPXAQGD557 core current draw is around 6-10 A at 1.0 V Vdd, plus multi-rail I/O supplies. Use a multi-phase VRM (e.g., a 4-phase buck controller with synchronous rectifiers) to meet the 1.0 V core rail. Power-sequencing must follow the NXP datasheet sequencing diagram - core rail must reach 90% before I/O rails start, otherwise POR will not deassert properly and boot ROM execution may be corrupted.
Estimated: With junction-to-ambient thermal resistance around 12-15 C/W for a 4-layer PCB, sustained full-load operation may push the junction above 105C. Use a passive heatsink with thermal interface material, or a small 40 mm fan for forced cooling. Place temperature sensors on the BGA substrate bottom side or use the on-chip thermal diode to monitor die temperature via a MAX31760 or similar monitoring IC. Consider thermal vias under the die for board-level cooling.
Common design errors include: (1) incorrect I/O voltage rail ordering during power sequencing causing POR not to deassert, (2) DDR2 clock routing with unmatched length causing bit errors at 800 MT/s, (3) SERDES reference clock jitter exceeding the 3.125 GHz spec, (4) LIBCFG pull-up resistor values that put the boot ROM into an unsupported boot mode. Always validate the boot flow against NXP's board bring-up checklist before large-volume production.
Reference the NXP AN3645 'DDR2 Design Guide for MPC8543E' and AN3796 'PowerQUICC III Board Layout Recommendations' for high-speed serial routing. SERDES lanes must be length-matched to within 150 mil to maintain 3.125 Gbps link stability. DDR2 byte lanes must be matched to within 25 ps of the DDR clock to meet JEDEC timing. Use IBIS models from the NXP website for signal-integrity simulation in tools like HyperLynx or Ansys SIwave.
규정 준수 정보
RoHS and REACH compliant per NXP product page. Not AEC-Q100 - designed for industrial/telecom embedded markets, not automotive.
