MPC8548ECVTAUJD - PowerQUICC III 1.333GHz SoC | NXP Semiconductors
부품 번호: MPC8548ECVTAUJD ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $268.5 | $2,685.00 |
| 100 | $245 | $24,500.00 |
| 500 | $225.75 | $112,875.00 |
| 1,000 | $208 | $208,000.00 |
MPC8548ECVTAUJD 개요
A microprocessor (MPU) is the central processing unit of an embedded system, responsible for executing instructions, managing memory, and orchestrating I/O. The PowerQUICC family bridges MPU, microcontroller, and ASIC functions into a single SoC, with each generation adding integration, performance, and security features. The MPC8548E specifically adds hardware-accelerated security (SEC 3.x) and high-speed serial I/O, positioning it within NXP's embedded networking and industrial control portfolio.
Key features include a 1.333 GHz e500 core with 32 KB L1 instruction and data caches, 512 KB of L2 cache, a 64-bit DDR2 memory controller with ECC, four GbE ports, two PCI Express interfaces, two Serial RapidIO endpoints, three PCI/PCI-X controllers, and the integrated SEC (Security Engine) for IPsec, SSL, and other cryptographic protocols. Local bus and DMA engines support legacy peripheral attachment, while a hardware UART, I2C, and GPIO block provide general-purpose connectivity. The integrated security engine offloads AES, 3DES, SHA, and public-key operations, enabling wire-speed encryption without CPU intervention.
Typical applications include industrial routers and switches, secure access points, network-attached storage controllers, factory automation controllers, and defense and aerospace ruggedized computing platforms where both performance and the extended temperature range are required. The combination of GbE, RapidIO, and PCI Express targets packet processing, line-card control, and intelligent network interface card designs.
When designing with this device, allocate generous PCB space for the 783-ball FCBGA land pattern and thermal vias under the package to manage the processor's thermal envelope, especially in sealed industrial enclosures. Engineering samples or engineering-grade qualification is recommended for production validation prior to high-volume board build.
드롭인 대체품: MPC8548ECVTAUJD — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8548ECVTAUJD (동일 폼 팩터 및 풋프린트) — 차이점: L2 Cache, PCI Express, Serial RapidIO, Ethernet, Memory Controller.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8548EVTAUJC
✅ 드롭인✓ 재고 있음
$185 / 개
데이터시트 보기 →MPC8548EVTAQGD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548ECVTAUJC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548EVTAVHD
✅ 드롭인✓ 재고 있음
$165 / 개
데이터시트 보기 →MPC8548EVTAUJD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548ECVTAUJD 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors |
| Series | PowerQUICC III |
| Core Processor | Power Architecture e500 |
| Core Speed | 1.333 GHz |
| Number of Cores | 1 |
| L1 Cache (Instruction/Data) | 32 KB / 32 KB |
| L2 Cache | 512 KB |
| 동작 온도 | -40C to +105C |
| 패키지 / 케이스 | 783-BBGA, FCBGA |
| 메모리 유형 | DDR2 with ECC |
| Ethernet | 4 x 10/100/1000 (GbE) |
| PCI Express | 2 x PCIe interfaces |
| Serial RapidIO | Yes (SRIO) |
| PCI / PCI-X | 3 x PCI / PCI-X controllers |
| Security Engine (SEC) | Integrated (crypto accelerator) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
MPC8548ECVTAUJD 783-bbga, fcbga 핀 구성 가이드
MPC8548ECVTAUJD(783-bbga, fcbga 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8548ECVTAUJD.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8548ECVTAUJD 적합 용도: 6 애플리케이션s: Industrial Routers and Secure Gateways, Network-Attached Storage and RAID Controllers, Defense and Aerospace Ruggedized Computing, Factory Automation and PLC Controllers, Wireless Infrastructure Baseband Controllers, Telecom Line Cards and ATCA Payloads.
Industrial Routers and Secure Gateways
The MPC8548ECVTAUJD's combination of four GbE ports, integrated SEC engine, and -40C to +105C rating makes it well-suited for industrial routers and secure gateways. At 1.333 GHz the e500 core sustains line-rate forwarding across multiple VLANs while the SEC 3.x engine offloads IPsec and SSL/TLS. Designers typically pair it with external PHYs and a DDR2 ECC SODIMM for fanless operation in control cabinets, accelerating VPN tunneling for SCADA and substations without CPU-loading the management plane.
추천
Network-Attached Storage and RAID Controllers
The DDR2 ECC memory controller and Serial RapidIO ports make the MPC8548ECVTAUJD a strong fit for NAS controllers and RAID-on-chip subsystems. The 64-bit ECC DDR2 interface supports multi-gigabyte system memory for cache, while SRIO acts as a private fabric between controller SoCs in clustered storage arrays. The SEC engine protects data-at-rest with hardware AES-XTS at line rate, and the PCI Express lanes attach to SAS/SATA controllers such as the NXP/Marvell-based PHYs popular in NAS reference designs.
추천
Defense and Aerospace Ruggedized Computing
The MPC8548ECVTAUJD's -40C to +105C operating range and integrated security engine suit it for defense and aerospace ruggedized SBCs and VPX payload cards. The FCBGA-783 package tolerates high-vibration environments when mounted on MIL-PRF PCB stacks with mechanical stiffeners. Designers pair the PCIe lanes with FPGA co-processors and use SRIO for backplane fabrics in 3U/6U VPX and ATCA platforms, where the SEC engine ensures tamper-resistant crypto for mission-critical comms.
추천
Factory Automation and PLC Controllers
The MPC8548ECVTAUJD fits high-end PLC and PAC designs requiring deterministic Ethernet and fieldbus convergence. The four GbE ports handle EtherCAT, PROFINET, and Ethernet/IP slaving on a single SoC, while PCI and PCI-X attach legacy factory-bus cards. The e500 core runs real-time operating systems such as VxWorks, INTEGRITY, and Linux PREEMPT-RT, and the extended temperature range supports production-line enclosures without active cooling.
추천
Wireless Infrastructure Baseband Controllers
For wireless base stations, the MPC8548ECVTAUJD acts as a baseband controller converging GbE backhaul, SRIO digital front-end links, and PCI Express radios. At 1.333 GHz it sustains LTE and 5G NR L2 processing for small cells while the SEC engine handles S1/X2 security. The DDR2 ECC controller supports real-time RF data buffers, and the multi-protocol SerDes share lanes between SRIO and PCIe so designers can route either as the radio interface evolves.
추천
Telecom Line Cards and ATCA Payloads
ATCA and AMC line cards rely on the MPC8548ECVTAUJD for control-plane processing plus packet classification. The integrated GbE and SRIO fabric eliminate external switch ASICs in low-port-count lines, and the SEC engine secures control traffic between shelves. The FCBGA-783 package is consistent with existing PowerQUICC III line-card layouts, enabling immediate BOM change to the AJD speed grade from older 1.0/1.2 GHz bins without mechanical rework.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8548ECVTAUJD — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8548EVTAUJC | MPC8548EVTAQGD | MPC8548ECVTAUJC | MPC8548EVTAVHD | MPC8548EVTAUJD |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same | 783-FCBGA - same |
| Core Architecture | e500 (Power Architecture) | e500 | e500 | e500 | e500 | e500 |
| L2 Cache | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Memory Controller | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC | DDR2 with ECC |
| Security Engine (SEC) | Yes (SEC 3.x) | Yes | Yes | Yes | Yes | Yes |
| GbE Ports | 4 | 4 | 4 | 4 | 4 | 4 |
주요 차별점
- Higher-speed 1.333 GHz AJD ordering code over standard 1.0 GHz bins (vs MPC8548VTAQGD (1.0 GHz bin))
- Integrated SEC 3.x cryptographic engine (vs MPC8536CVJAULA)
- Extended -40C to +105C industrial temperature range (vs MPC8548EVTAUJC (commercial tier))
설계 노트
The 783-FCBGA package mandates a 1.0 mm (or finer) PCB pitch and microvia technology. Route the DDR2 interface to a matched-length, 50-ohm impedance layer right under the package; misrouting even two ball pairs will tank ECC margin and force timing reduction. Place decoupling capacitors on the opposite side of the BGA within the via-array keepout. Reference-decoupling recommendations in the NXP hardware-design checklist.
Estimated: at 1.333 GHz and typical 1.0 V Vcore, the FCBGA package dissipates 8-15 W depending on workload. With theta_JA in the high single-digit C/W range for an 8-layer board with thermal vias, a heatsink or thermal interface material is required to stay below +105C Tj at full load in sealed enclosures. Tie all GND balls to a continuous copper pour and stitch thermal vias directly under the die for best conductivity.
The multi-protocol SerDes lanes share PHYs between SRIO and PCI Express. Pre-set the Reset Configuration Word (RCW) at design time so the desired protocol is fixed - hot-swapping protocols risks PHY lock loss. Maintain 90-ohm differential impedance on SerDes pairs with reference plane continuity, and prefer back-drilled vias to control stubs on long PCIe lanes. Use IBIS-AMI simulations before committing to stack-up.
Avoid using the AJD part in designs that rely on the legacy SEC 2.0 driver stack - the SEC 3.x engine requires updated firmware. Mixing speed grades (1.0 GHz bins vs 1.333 GHz) without retraining DDR2 PLL registers will cause intermittent memory errors. Validate the boot ROM contents before each production run since mask sets can change peripheral muxing silently.
규정 준수 정보
RoHS compliance per NXP product page. AEC-Q100 not applicable for this industrial networking MPU - AEC-Q100 qualification is for automotive MCUs, not PowerQUICC III line cards.