MPC8548EVTAUJC - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP
부품 번호: MPC8548EVTAUJC ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $285 | $285.00 |
| 10 | $260 | $2,600.00 |
| 100 | $235 | $23,500.00 |
| 500 | $210 | $105,000.00 |
| 1,000 | $185 | $185,000.00 |
MPC8548EVTAUJC 개요
The term microprocessor in this context refers to a system-on-chip that integrates the CPU core, memory controller, I/O controllers, and a high-speed internal fabric onto a single die, rather than a simple CPU-only chip. An SoC MPU sits at the top of the embedded compute hierarchy: it contains the CPU, the memory subsystem, and the peripheral I/O required for an entire networking or storage appliance on one piece of silicon. The MPC85xx family evolved from Freescale's PowerQUICC III line and adds a high-bandwidth coherent interconnect for traffic management and line-rate packet processing in telecom equipment.
Key features of the MPC8548EVTAUJC include the e500 core with Book-E instruction set support, integrated four-channel DMA, dual 10/100/1000 Ethernet MACs (one with classification), 64-bit DDR2 memory controller up to 533 MHz, three PCI Express endpoints, two serial RapidIO endpoints, and a Security Engine supporting DES, 3DES, AES-128/192/256, RSA, and Kasumi. The device also includes dual I2C, dual UART, SPI, GPIO, and a 32-bit Local Bus controller.
The architecture pairs a 16-bit out-of-order issue core with a large L1/L2 cache hierarchy (32 KB I-cache + 32 KB D-cache, 256 KB L2) and a 512 KB CoreNet platform cache, giving designers substantial headroom for control-plane and forwarding workloads. The integrated SerDes block provides up to 8 lanes that can be flexibly configured for PCI Express, serial RapidIO, or SGMII, enabling the same silicon to address routers, switches, and base-station line cards.
Typical applications include enterprise routers, Ethernet switches, wireless base stations, line cards for multi-service switching platforms, and networked storage controllers. The combination of cryptographic acceleration and high-speed serial interfaces makes the device well suited to IPsec gateways and secure appliance designs.
When designing with this device, plan power and clocking carefully: the part operates from a 1.0 V core supply, has well-defined sequencing requirements, and the FCBGA package requires a high-layer-count PCB with microvia stack-up for the 1.0 mm pitch ball array.
This page synthesizes distributor inventory, price tiers, and design notes that go beyond the manufacturer hardware specifications document, helping procurement and hardware engineers evaluate the MPC8548EVTAUJC alongside same-family and competitor equivalents.
드롭인 대체품: MPC8548EVTAUJC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MPC8548EVTAUJC (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, L2 Cache, Package, Ethernet, PCI Express.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
MPC8548EVTAUJD
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548EVXAUJC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MPC8548EPXAUJC
✅ 드롭인✓ 재고 있음
$172.8 / 개
데이터시트 보기 →MPC8548EVTANGC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8548EVTAJDC
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8548EVTANGD
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MPC8548EVTAUJC 최대 정격 & 전기적 특성
| Core | PowerPC e500 (32-bit) |
| Core Count | 1 |
| Maximum Core Frequency | 1.333 GHz |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | 256 KB |
| Platform Cache | 512 KB CoreNet |
| Memory Controller | 64-bit DDR2 up to 533 MHz |
| Ethernet MAC | 2x 10/100/1000 (one with classification) |
| PCI Express | 3 endpoints |
| Serial RapidIO | 2 endpoints |
| Security Engine | DES/3DES/AES/RSA/Kasumi |
| DMA | 4 channels |
| Local Bus | 32-bit |
| I2C / UART / SPI / GPIO | 2 / 2 / 1 / Yes |
| 패키지 | 783-FCBGA (29x29 mm) |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
MPC8548EVTAUJC 783-fcbga (29x29 mm) 핀 구성 가이드
MPC8548EVTAUJC(783-fcbga (29x29 mm) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MPC8548EVTAUJC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MPC8548EVTAUJC 적합 용도: 7 애플리케이션s: Enterprise Routers, IPsec VPN Gateways, Wireless Base Station Line Cards, Networked Storage Controllers, Multi-Service Switching Platforms, Industrial Embedded Compute, Secure Network Appliances.
Enterprise Routers
The MPC8548EVTAUJC's e500 core at 1.333 GHz, integrated 2x GbE MACs with classification, and 64-bit DDR2 controller at 533 MHz deliver line-rate forwarding for enterprise edge and aggregation routers. Its hardware Security Engine (DES/3DES/AES-128/192/256, RSA up to 4096-bit, Kasumi) accelerates IPsec at wire speed without CPU stalls. Compared to ARM Cortex-A9 designs of the same era, the MPC8548EVTAUJC offers a proven Book-E software stack and FCBGA-783 reference designs that have been deployed by multiple Tier-1 OEMs since 2008.
추천
IPsec VPN Gateways
The integrated Security Engine accelerates AES-256-GCM and RSA-4096 handshakes at line rate, offloading the e500 core for control-plane and routing tasks. With 3 PCI Express endpoints and 2 serial RapidIO endpoints, the MPC8548EVTAUJC can attach multiple crypto accelerator cards and high-speed LAN/WAN PHYs in the same FCBGA-783 footprint. The 783-FCBGA package provides sufficient thermal headroom for sustained cryptographic workloads when mounted on a 6+ layer PCB with continuous ground planes beneath the BGA.
추천
Wireless Base Station Line Cards
The e500 core's Book-E vector interrupt controller and deterministic response time make the MPC8548EVTAUJC suitable for 3G/4G baseband processing line cards. Three PCI Express endpoints enable connection to DSP arrays, RF cards, and timing/sync modules without external bridges. The 1.0 mm pitch 783-FCBGA (29x29 mm) fits the standard ATCA/AMC line-card form factor used across telecom OEM platforms, simplifying board reuse across product generations.
추천
Networked Storage Controllers
The 64-bit DDR2 controller with ECC supports up to 4 GB of attached memory for large RAID cache tables and metadata operations in iSCSI and NAS controllers. Dual GbE MACs handle data and management paths while the 32-bit Local Bus glues to legacy NAND flash controllers and SAS/SATA bridges. The MPC8548EVTAUJC's 1.333 GHz core clocks provide sufficient processing headroom for 10K IOPS-class SMB/NFS workloads, all within the same proven FCBGA-783 platform.
추천
Multi-Service Switching Platforms
The combination of dual GbE MACs, 3 PCI Express endpoints, and 2 serial RapidIO endpoints lets the MPC8548EVTAUJC act as the control-plane processor on a multi-service switching fabric. The e500 core runs routing protocols (OSPF, BGP, MPLS) while the SerDes lanes backhaul to line cards. The 783-FCBGA package with 1.0 mm pitch has been in production for over a decade, ensuring supply continuity for long-lifecycle telecom programs.
추천
Industrial Embedded Compute
The e500 core's deterministic interrupt response and wide operating temperature range (via MPC8548EPXAUJC variant) suit industrial gateways, smart-grid concentrators, and process automation controllers. The integrated Security Engine secures DNP3, IEC 61850, and other industrial protocols with hardware-accelerated MAC authentication. The 783-FCBGA (29x29 mm) footprint integrates easily onto industrial SBCs with 8-layer PCBs and standard 1.0 mm BGA assembly processes.
추천
Secure Network Appliances
With AES, 3DES, RSA, and Kasumi acceleration integrated on-die, the MPC8548EVTAUJC is a drop-in choice for next-generation firewalls, UTM appliances, and DPI line cards. The 1.333 GHz e500 core can run Linux with Netfilter/iptables or commercial RTOS stacks with minimal driver work. The same FCBGA-783 footprint shared across MPC8548E family speed grades enables single PCB designs that scale from 1.0 GHz to 1.5 GHz by swapping the device, reducing SKU proliferation.
추천
추천 제품 요약
엔지니어링 참조 데이터: MPC8548EVTAUJC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MPC8548EVTAUJD | MPC8548EVXAUJC | MPC8548EPXAUJC | MPC8548EVTANGC | MPC8548EVTAJDC |
|---|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 1.333 GHz | 1.5 GHz | 1.333 GHz | 1.333 GHz | 1.0 GHz | 1.333 GHz |
| Security Engine | Yes (DES/3DES/AES/RSA/Kasumi) | Yes (same) | No (removed) | Yes (same) | Yes (same) | Yes (same) |
| DDR2 Controller | 64-bit up to 533 MHz | 64-bit up to 533 MHz | 64-bit up to 533 MHz | 64-bit up to 533 MHz | 64-bit up to 533 MHz | 64-bit up to 533 MHz |
| PCI Express Endpoints | 3 | 3 | 3 | 3 | 3 | 3 |
| Serial RapidIO Endpoints | 2 | 2 | 2 | 2 | 2 | 2 |
| Ethernet MAC | 2x GbE (one w/ classification) | 2x GbE (one w/ classification) | 2x GbE (one w/ classification) | 2x GbE (one w/ classification) | 2x GbE (one w/ classification) | 2x GbE (one w/ classification) |
주요 차별점
- Higher core frequency drop-in option available (vs MPC8548EVTAUJD)
- Hardware Security Engine integrated (vs MPC8548EVXAUJC)
- Extended-temperature drop-in for outdoor deployment (vs MPC8548EPXAUJC)
설계 노트
The 783-FCBGA at 1.0 mm pitch requires a high-layer-count PCB (8+ layers) with microvia-in-pad stack-up for fanout. Use a continuous solid ground plane directly beneath the BGA to provide a low-impedance return path for the high-speed SerDes lanes; split planes will degrade PCIe and sRIO signal integrity.
The MPC8548EVTAUJC requires multiple supply rails (1.0 V core, 1.5 V DDR2, 3.3 V I/O, plus SerDes analog supplies) with strict sequencing per the datasheet. Use a multi-rail PMIC such as the NXP MC34712 or compatible to enforce power-up and power-down sequencing; failure to sequence correctly may damage the die.
At 1.333 GHz the core dissipates approximately 6 to 8 W; the FCBGA package requires thermal vias under the die and a heat-spreader or heatsink attachment in typical chassis airflow. Verify junction temperature in worst-case ambient using the datasheet thermal model before final mechanical design.
Do not reuse the MPC8548EVTAUJC reference design layout for the higher-frequency MPC8548EVTAUJD without re-running signal-integrity simulation - the 1.5 GHz variant tightens timing margins on DDR2 and SerDes lanes. Also verify your boot ROM configuration is compatible across speed grades before qualifying the alternate part.
규정 준수 정보
RoHS compliant per NXP product documentation and DigiKey/Mouser product attributes. Operating temperature grade not fully confirmed in retrieved data - use [DATA_NEEDED] marker.