MSP430F156IPM - 8MHz 16-Bit Mixed-Signal MCU | TI
부품 번호: MSP430F156IPM ✓ 활성MSP430F156IPM 개요
A microcontroller is a programmable system-on-chip that combines a processor core, memory, peripherals, and input/output interfaces on one package. The MSP430 belongs to the mixed-signal microcontroller hierarchy, combining a 16-bit RISC processor with analog measurement and conversion functions. This integration allows one device to control digital logic while acquiring, comparing, and generating analog signals, reducing component count in instrument and sensor designs.
The MSP430 CPU provides a 125 ns instruction cycle time at 8 MHz, 16-bit registers, and constant generators that support efficient code generation. Its 24 KB Flash configuration holds programmed firmware, while 1 KB of SRAM provides working memory. A three-channel DMA controller can transfer data between memory and peripherals with reduced processor intervention, which is useful when measurements must continue at predictable rates.
The analog subsystem includes a 12-bit ADC with internal reference and sample-and-hold capability, two 12-bit DAC channels, and a comparator. Serial connectivity covers I2C, SPI, and UART. The I2C controller complies with the Philips I2C specification version 2.1, supports standard mode up to 100 kbps and fast mode up to 400 kbps, and offers 7-bit and 10-bit addressing in master and slave modes.
Low-power operation is central to the architecture. The device operates from 1.8 V to 3.6 V and provides five power-saving modes. Published figures include 330 µA active current at 1 MHz and 2.2 V, 1.1 µA in standby, and 0.2 µA in off mode with RAM retention. Wake-up from standby can occur in less than 6 µs, supporting battery-powered equipment that spends most of its operating time in a low-energy state.
Typical uses include industrial sensor controllers, portable instrumentation, low-power data loggers, actuator control, and mixed-signal products requiring local ADC, DAC, and comparator resources. Designers should select decoupling capacitors and analog reference components according to the manufacturer application guidance, validate pin multiplexing in the device pin table, and keep the 1.8 V to 3.6 V supply range within the final product's environmental limits.
This page combines the manufacturer product information, distributor availability records, interface specifications, operating characteristics, application guidance, and verified replacement analysis to support faster component selection and board-level design.
드롭인 대체품: MSP430F156IPM — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MSP430F156IPM (동일 폼 팩터 및 풋프린트) — 차이점: Package, Flash Memory, Comparator, SRAM, CPU Architecture.
MSP430F149IPM
✅ 드롭인가격 문의
데이터시트 보기 →MSP430F156IPM 최대 정격 & 전기적 특성
| Product Type | 16-bit mixed-signal microcontroller |
| CPU Architecture | 16-bit RISC |
| Maximum Clock Speed | 8 MHz |
| Instruction Cycle Time | 125 ns |
| Flash Memory | 24 KB (24K x 8 plus 256 B) |
| SRAM | 1 KB |
| ADC Resolution | 12 bit |
| DAC Configuration | Dual 12-bit DAC |
| Comparator | Integrated |
| DMA Controller | 3-channel internal DMA |
| Serial Interfaces | I2C, SPI, and UART |
| I2C Maximum Data Rate | 400 kbps |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Active Current | 330 µA at 1 MHz and 2.2 V |
| Standby Current | 1.1 µA |
| Off Current with RAM Retention | 0.2 µA |
| Wake-Up Time from Standby | Less than 6 µs |
| Power-Saving Modes | 5 |
| I/O Port Count | 22 |
| 패키지 | 64-LQFP, 10 x 10 mm |
| 실장 유형 | Surface mount |
| Operating Temperature Grade | Industrial |
MSP430F156IPM 64-lqfp, 10 x 10 mm 핀 구성 가이드
MSP430F156IPM(64-lqfp, 10 x 10 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MSP430F156IPM.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MSP430F156IPM 적합 용도: 6 애플리케이션s: Portable Sensor Instrumentation, Industrial Sensor Control, Battery-Powered Data Logger, Precision Analog Signal Generation, Actuator and Motor Interface Control, Embedded Communication Gateway.
Portable Sensor Instrumentation
The MSP430F156IPM fits portable measurement instruments that must acquire analog signals while conserving battery charge. Its 12-bit ADC, internal reference, sample-and-hold function, and three-channel DMA provide a compact path from sensor input to processed data. The 8 MHz 16-bit RISC CPU offers 125 ns instruction cycles, while five power-saving modes support designs that spend most of their time at 1.1 µA in standby. Wake-up in less than 6 µs helps the instrument respond quickly to operator input or scheduled sampling events without maintaining a continuously active processor.
추천
Industrial Sensor Control
The MSP430F156IPM is suitable for industrial sensor-control modules that combine measurement, local decision-making, and actuator communication. The 12-bit ADC supports analog sensor conditioning, the comparator can handle threshold events, and the dual 12-bit DACs can generate control or reference voltages. Its I2C interface operates up to 400 kbps, while SPI and UART provide additional paths to sensors, converters, and remote communications. Operation from 1.8 V to 3.6 V supports low-voltage industrial designs, provided the board uses appropriate protection and decoupling.
추천
Battery-Powered Data Logger
The MSP430F156IPM supports battery-powered data loggers that periodically sample analog channels and store or transmit results. Its three-channel DMA can move ADC data with limited processor intervention, while the 24 KB of Flash provides space for firmware and compact data structures. The 330 µA active current at 1 MHz and 2.2 V offers a defined basis for duty-cycle calculations, and the 0.2 µA off-mode current with RAM retention helps preserve operating state between measurement intervals. Storage endurance and sleep-mode current should be evaluated for each selected memory technology and sampling interval.
추천
Precision Analog Signal Generation
The MSP430F156IPM is appropriate for compact analog-output equipment that needs accurate digital-to-analog conversion alongside embedded control. Two 12-bit DAC channels can generate reference or control voltages without requiring a separate DAC package, while the ADC provides a feedback path for monitoring the result. The 8 MHz RISC CPU can execute compensation and control algorithms with a 125 ns instruction cycle time. Designers should treat DAC output noise, reference stability, settling behavior, and output loading as board-level considerations and follow the manufacturer layout guidance for sensitive analog signals.
추천
Actuator and Motor Interface Control
The MSP430F156IPM can serve as the supervisory controller in actuator, valve, or motor-control systems where local logic must coordinate sensors and drive signals. The comparator supports fast threshold monitoring, the ADC captures slower feedback values, and the dual DACs can provide control references. UART and SPI permit connection to gate drivers, position sensors, or communications modules, while I2C supports lower-speed peripherals. The MCU's 1.8 V to 3.6 V range integrates readily with low-voltage logic, although motor transients require separate protection and careful grounding.
추천
Embedded Communication Gateway
The MSP430F156IPM can act as a small embedded gateway between sensors and a higher-level communications link. I2C supports standard mode through 100 kbps and fast mode through 400 kbps with 7-bit or 10-bit addressing, making it suitable for multiple slow peripherals. SPI offers higher-throughput connectivity for radio or storage devices, and UART handles simple host or module links. Five power-saving modes reduce idle consumption, while DMA can service transfers and reduce processor overhead. Production firmware must validate bus timing, interrupt priorities, and peripheral pin multiplexing for the selected board configuration.
추천
추천 제품 요약
엔지니어링 참조 데이터: MSP430F156IPM — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MSP430F149IPM |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 64-LQFP (10 x 10 mm) | 64-LQFP (10 x 10 mm) |
| Maximum Clock Speed | 8 MHz | 8 MHz |
| CPU Architecture | 16-bit RISC | 16-bit RISC |
| Flash Memory | 24 KB | 60 KB |
| SRAM | 1 KB | 2 KB |
| ADC Resolution | 12 bit | 12 bit |
| Supply Voltage Range | 1.8 V to 3.6 V | 1.8 V to 3.6 V |
| Power-Saving Modes | 5 | 5 |
| Serial Interfaces | I2C, SPI, and UART | I2C, SPI, and UART |
주요 차별점
- Lower memory configuration supports firmware-cost optimization (vs MSP430F149IPM)
- Integrated mixed-signal resources reduce external converter overhead (vs MSP430F149IPM)
- Low-power operation supports battery-focused designs (vs MSP430F149IPM)
설계 노트
Calculate the active duty cycle from the 330 µA figure at 1 MHz and 2.2 V, then add standby and off-mode contributions using 1.1 µA and 0.2 µA respectively. Keep the supply within 1.8 V to 3.6 V and include local bypass capacitance close to the device supply pins. Wake-up timing should be included in the response-time budget because standby wake-up can require less than 6 µs.
Separate analog and digital return currents as far as practical, maintain a compact ground reference around the ADC and DAC circuitry, and route sensitive analog inputs away from switching nodes and high-current return paths. Use the manufacturer pin-description table to verify analog, reference, communication, and port multiplexing. Validate the final layout with converter accuracy and noise measurements because package placement and grounding can materially affect mixed-signal performance.
Do not treat a shared package as proof of identical behavior. When evaluating MSP430F149IPM as a replacement, review memory size, peripheral availability, port multiplexing, interrupt assignments, clock configuration, and startup code. Also confirm the active-high or active-low polarity of every control signal in the actual schematic. A successful PCB fit alone does not establish function, timing, or firmware compatibility.
Assign I2C, SPI, and UART functions only after checking the alternate-function settings for the selected pins. I2C rise time and pull-up sizing depend on bus capacitance and speed, while SPI timing depends on the peripheral clock and trace loading. Use the manufacturer timing characteristics for setup and hold requirements and keep clock and data routing short, with a continuous ground reference beneath high-speed traces.
규정 준수 정보
The device is identified as an industrial-grade mixed-signal microcontroller. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not established by the available product summaries.