Texas Instruments

MSP430F2002IPW - 16MHz 1KB Flash MCU | Texas Instruments

부품 번호: MSP430F2002IPW ✓ 활성
14-pin TSSOP Package 16 MHz Speed 1 KB Memory
MOQ: 1 |

MSP430F2002IPW 개요

The Texas Instruments MSP430F2002IPW is an ultra-low-power, 16-bit mixed-signal microcontroller with a 16 MHz RISC core, 1 KB of Flash memory, 128 B of SRAM, and a 14-pin TSSOP package. It integrates ten I/O pins, a 10-bit ADC, an analog comparator, a 16-bit timer, and serial communications supporting SPI and I2C.

A mixed-signal microcontroller is a semiconductor device that combines digital control logic with analog measurement or comparison functions. The MSP430 belongs to the broader hierarchy of embedded MCU, processor, and semiconductor products. Its architecture is designed for compact control systems in which low energy consumption, deterministic operation, and integrated sensing can reduce the number of external components.

The principal benefits of the MSP430F2002IPW include its 16 MHz operating clock, 1 KB Flash program memory, 128 B SRAM, and five low-power operating modes. The 10-bit ADC supports embedded measurement without requiring a separate converter, while the comparator supports threshold detection and basic signal conditioning. SPI and I2C interfaces allow the controller to communicate with sensors, memories, transceivers, and other low-speed peripherals.

The MSP430 uses a 16-bit RISC CPU with 16-bit registers, providing efficient execution for sensor acquisition, control loops, timing, and low-power state management. Five low-power modes are particularly valuable in battery-powered equipment because firmware can disable unused peripherals and place the MCU into a lower-energy state between measurement or communications events.

Typical uses include portable measurement instruments, compact industrial sensors, low-power data loggers, battery-operated monitoring modules, and embedded control systems with analog inputs. Its integrated ADC, comparator, timer, and serial interfaces make it especially appropriate for designs in which board area and standby energy are more important than large program-memory capacity.

When designing around this MCU, confirm that the application code, boot configuration, communication stack, and calibration data fit within the 1 KB Flash and 128 B SRAM limits. Use the manufacturer pin-description table when assigning PCB tracks, and follow the recommended decoupling and exposed-ground-layout guidance for the 14-pin TSSOP package.

This page consolidates the device identity, memory and peripheral details, commercial information, same-family replacement options, comparison parameters, and practical PCB guidance into one engineering-focused reference for designers evaluating the MSP430F2002IPW.

드롭인 대체품: MSP430F2002IPW — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: MSP430F2002IPW (동일 폼 팩터 및 풋프린트) — 차이점: ADC Resolution, Flash Memory, Package, SRAM.

Texas Instruments
ADC Resolution: 10 bits
Flash Memory: 2 KB
Package: 14-pin TSSOP (PW)
비교 대상: MSP430F2002IPW →

MSP430F2001IPW

✅ 드롭인 ⚠️ 사양 미검증
📦 14-TSSOP
Same 16 MHz core, 1 KB Flash, and 128 B SRAM; the 10-bit ADC is not provided, while pin mapping must still be checked.

📋 참조 대체품 (카탈로그에 없음)

MSP430F2003IPW

✅ 드롭인 ⚠️ 사양 미검증
📦 14-TSSOP
Same 16 MHz core, 1 KB Flash, and 128 B SRAM; the 10-bit ADC is replaced by a 16-bit sigma-delta ADC.

📋 참조 대체품 (카탈로그에 없음)

MSP430F2011IPW

✅ 드롭인 ⚠️ 사양 미검증
📦 14-TSSOP
Same 16 MHz core and 14-TSSOP format; Flash increases from 1 KB to 2 KB while the 10-bit ADC is absent.

📋 참조 대체품 (카탈로그에 없음)

MSP430F2012IPW

✅ 드롭인 ⚠️ 사양 미검증
Texas Instruments
📦 14-TSSOP
16-bit RISC · 16 MHz · 125 ns · 2 KB · 128 bytes · 10 bits · I2C and SPI · Yes

가격 문의

데이터시트 보기 →

MSP430F2013IPW

✅ 드롭인 ⚠️ 사양 미검증
📦 14-TSSOP
Same 16 MHz core and 14-TSSOP format; Flash increases from 1 KB to 2 KB and the ADC implementation differs.

📋 참조 대체품 (카탈로그에 없음)

MSP430F2002IPW 최대 정격 & 전기적 특성

Product Type 16-bit ultra-low-power mixed-signal microcontroller
최대 클록 주파수 16 MHz
CPU Architecture 16-bit RISC
Register Width 16 bit
Flash Memory 1 KB
SRAM 128 B
ADC Resolution 10 bit
Analog Comparator 1 integrated comparator
Timer 1 integrated 16-bit timer
Serial Interfaces SPI and I2C
General-Purpose I/O Pins 10 pins
Low-Power Modes 5 modes
패키지 14-pin TSSOP
실장 유형 Surface mount

MSP430F2002IPW 14-pin tssop 핀 구성 가이드

MSP430F2002IPW(14-pin tssop 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

MSP430F2002IPW의 14-pin tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: MSP430F2002IPW.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

MSP430F2002IPW 적합 용도: 6 애플리케이션s: Portable Data Logger, Industrial Sensor Interface, Battery-Powered Monitor, Embedded Control Module, Digital Potentiometer Control, Low-Power Communication Node.

🔋

Portable Data Logger

The MSP430F2002IPW fits portable data loggers that periodically measure an analog input and then sleep between samples. Its 16 MHz CPU executes acquisition, scaling, and storage-control routines, while the integrated 10-bit ADC reduces the need for a separate converter. The five low-power modes are especially valuable for battery-operated equipment because firmware can disable unused blocks between measurements. The main constraint is memory: only 1 KB of Flash and 128 B of SRAM are available, so designers should minimize buffers, store dense sampled data externally, and avoid resource-heavy middleware.

🏭

Industrial Sensor Interface

The MSP430F2002IPW is useful for compact industrial sensor interfaces where a 10-bit measurement, threshold decision, and serial reporting must be handled locally. Its analog comparator can perform fast threshold detection, while the ADC provides a sampled signal for filtering and calibration. SPI and I2C permit connection to industrial sensors or external signal-conditioning devices. For robust operation, keep the sensor path away from switching nodes, provide local supply bypassing, and use the device’s low-power modes only after confirming that the selected sensor and interface circuitry tolerate the resulting wake-up interval.

🧩

Battery-Powered Monitor

A battery-powered environmental or equipment monitor can use the MSP430F2002IPW to combine measurement, comparison, and communications in one 14-pin device. The 10-bit ADC supports basic level or condition monitoring, and the comparator can implement threshold events without continuously running conversion software. The five low-power modes allow the MCU to remain asleep during long idle intervals and wake for periodic measurements. Designers should select external sensors with low standby demand, keep leakage paths off analog inputs, and size storage and communications so that processing after wake-up does not compromise the intended battery life.

⚡

Embedded Control Module

The MSP430F2002IPW can serve as the central controller in a small embedded module that accepts digital commands, drives an actuator interface, and monitors a sensor signal. Its 16-bit RISC core and ten I/O pins provide enough parallelism for basic sequencing and timing, while SPI or I2C handles slower peripheral traffic. Because the 14-pin package has limited I/O, priority signals should be assigned to the pins with the required timer or interrupt functions. Firmware should use the timer as the timing reference and place repetitive processing into interrupt service routines to maintain predictable response behavior.

🔧

Digital Potentiometer Control

The MSP430F2002IPW is appropriate for controlling a digital potentiometer or similar SPI-compatible actuator in compact analog systems. The SPI interface shares the MCU with the ADC and comparator, allowing a firmware loop to read a measured value, compare it with a target, and update the actuator. The 16 MHz clock provides ample execution margin for simple control calculations, while low-power modes help reduce consumption when the actuator does not need continuous updating. The tight memory limits require concise control code and careful buffer allocation, especially if local calibration data must also be retained.

🌐

Low-Power Communication Node

The MSP430F2002IPW can act as a low-power communication node when a design must connect a sensor or simple control point to an SPI or I2C bus. The MCU can format measurements, manage acknowledgements, and enter a low-power state between transactions. Its 10-bit ADC supports local analog supervision, and the timer can establish communication or sampling intervals. Bus reliability depends on correct pull-up placement, signal-level compatibility, and isolation from noisy power stages. Firmware should define timeout and recovery behavior because the limited RAM constrains buffering for complex protocol stacks.

추천 제품 요약

MSP430I2041 Low-power metering microcontroller option 사용처: Portable Data Logger MSP430F2002TPWR Same-device family option for board sourcing 사용처: Portable Data Logger KSZ8721BLI-TR Microchip Technology 사용처: Industrial Sensor Interface KSZ8041TLI-TR Microchip Technology 사용처: Industrial Sensor Interface MSP430F133IPMR Texas Instruments 사용처: Battery-Powered Monitor, Embedded Control Module MAX3221IPWR Texas Instruments 사용처: Battery-Powered Monitor, Low-Power Communication Node STM8S103C8U6TR Small-form-factor embedded-control alternative 사용처: Embedded Control Module MSP430F2012IPW Texas Instruments 사용처: Digital Potentiometer Control MSP430F2002IPWR Reel-form same-device ordering option 사용처: Digital Potentiometer Control KSZ8041MLL-TR Microchip Technology 사용처: Low-Power Communication Node
What is MSP430F2002IPW?
The MSP430F2002IPW is a Texas Instruments 16-bit, ultra-low-power mixed-signal microcontroller built around a 16 MHz MSP430 RISC core. According to the manufacturer datasheet, the device combines 1 KB of Flash, 128 B of SRAM, ten I/O pins, a 10-bit ADC, an analog comparator, a 16-bit timer, and SPI and I2C interfaces in a 14-pin TSSOP package. It is intended for compact embedded-control and portable measurement designs where integration, standby power, and analog functions matter more than large memory capacity.
What are the key specifications of MSP430F2002IPW?
The MSP430F2002IPW combines a 16 MHz clock, 16-bit RISC CPU, 1 KB Flash, 128 B SRAM, and five low-power modes. According to the Texas Instruments product page and datasheet, it also provides a 10-bit ADC, analog comparator, 16-bit timer, ten I/O pins, and SPI or I2C communication. The 14-pin TSSOP package makes the device suitable for compact boards, although the small memory footprint requires careful firmware and buffer sizing.
What is the operating voltage of MSP430F2002IPW?
The operating-voltage limits must be confirmed in the manufacturer electrical-characteristics table before the MSP430F2002IPW is connected to a supply. The Texas Instruments datasheet is the authoritative source for the device’s minimum and maximum supply ratings and related current specifications. This distinction matters because the MCU operates from low voltage, and selecting a supply outside its rated range can compromise startup behavior, communication accuracy, and long-term reliability.
Does MSP430F2002IPW support ADC, SPI, and I2C?
The MSP430F2002IPW includes a 10-bit ADC and synchronous serial communication supporting SPI and I2C. The manufacturer datasheet identifies the ADC as part of the MSP430F20x2 mixed-signal feature set, while the family datasheet also describes the serial peripheral interfaces. These integrated blocks allow a design to measure analog inputs and exchange data with sensors, memories, or transceivers without implementing separate converters or interface controllers.
Where can I download the MSP430F2002IPW datasheet PDF?
The MSP430F2002IPW datasheet PDF is available through the Texas Instruments document link on this page and through the manufacturer product page for the MSP430F2002. The document covers the MSP430F20x1, MSP430F20x2, and MSP430F20x3 mixed-signal microcontroller family. Use the pin-description and electrical-characteristics tables when assigning package pins, selecting supply voltage, and checking peripheral limits before releasing a PCB design.
Where can I find the MSP430F2002IPW pinout?
The MSP430F2002IPW pinout is defined in the pin-configuration and package-drawing sections of the Texas Instruments family datasheet. The device uses a 14-pin TSSOP package, so engineers should match all 14 physical pins and the exposed pad information exactly to the manufacturer drawing. The pin-description table is the correct reference for reset, supply, ground, I/O, and communication assignments rather than third-party board layouts.
Is MSP430F2002IPW suitable for battery-powered measurement devices?
The MSP430F2002IPW is suitable for battery-powered measurement devices because its 16-bit RISC architecture is paired with five low-power operating modes. The Texas Instruments product page describes the MSP430 family as optimized for extended battery life in portable measurement applications. Its 10-bit ADC and comparator can reduce external circuitry, while firmware can disable unused peripherals between samples to conserve energy.
When should I choose MSP430F2002IPW over another MSP430 device?
Choose the MSP430F2002IPW when the design needs a compact 16 MHz mixed-signal MCU with 1 KB Flash, 128 B SRAM, a 10-bit ADC, and both SPI and I2C in a 14-pin TSSOP. It is less appropriate when firmware requires substantially more program memory, larger RAM buffers, more I/O, or a different ADC architecture. Alternatives in the same family should be selected according to memory, peripheral, package, and pin requirements rather than clock speed alone.
MSP430F2002IPW vs MSP430F2003IPW: which is better for analog measurement?
The MSP430F2002IPW is preferable when a 10-bit ADC is sufficient, while the MSP430F2003IPW is the more natural choice when higher-resolution sigma-delta conversion is required. The family datasheet identifies the MSP430F20x2 with a 10-bit ADC and the MSP430F20x3 with a 16-bit sigma-delta ADC. Both approaches depend on the same broader MSP430F20x platform, but conversion resolution and measurement requirements should determine the choice.
What is the best drop-in replacement for MSP430F2002IPW?
The closest same-family drop-in candidates are the MSP430F2001IPW and MSP430F2003IPW because they retain the 14-pin TSSOP platform, 16 MHz clock, 1 KB Flash, and 128 B SRAM while changing the analog-peripheral mix. No verified cross-manufacturer pin-to-pin equivalent was identified. Before replacing the MSP430F2002IPW, verify every physical pin, required interrupt vector, ADC behavior, and firmware dependency rather than relying only on the shared package.
Can MSP430F2003IPW replace MSP430F2002IPW?
The MSP430F2003IPW can be considered as a same-family board-level alternative when its 16-bit sigma-delta ADC is acceptable and the firmware is revised for the changed peripheral implementation. It shares the 14-pin TSSOP format, 16 MHz clock, 1 KB Flash, and 128 B SRAM with the MSP430F2002IPW. The important trade-off is the move from a 10-bit ADC to a 16-bit sigma-delta ADC, so existing conversion routines may require modification.
What can replace MSP430F2002IPW in an ultra-low-power design?
A same-family MSP430F20x device is the most credible replacement when pin compatibility and low-power operation are mandatory. The MSP430F2001IPW preserves the 16 MHz core, 1 KB Flash, 128 B SRAM, and 14-pin TSSOP format but does not provide the same full ADC feature set. A cross-brand substitute should be accepted only after its pinout, voltage range, current consumption, wake-up behavior, and development-tool chain have been independently validated.
Where can I buy MSP430F2002IPW online?
Use the Request a Quote form on this page to request MSP430F2002IPW availability, current lead time, and minimum-order quantity. The request can identify the 14-pin TSSOP package and the required MSP430F2002IPW ordering code. Commercial details should be confirmed when the quotation is prepared because inventory, lifecycle status, and order handling can change independently of the device’s technical specifications.
What is the price of MSP430F2002IPW?
Submit the MSP430F2002IPW request through the Request a Quote form on this page to obtain the current commercial quotation. The form supports quantity-based sourcing requirements and clarifies the exact 14-pin TSSOP ordering code. Because price and stock vary with order quantity and market conditions, the current quotation is the appropriate commercial reference for this component.
Is MSP430F2002IPW in stock and what is its lead time?
Current stock and lead time for the MSP430F2002IPW should be requested through the Request a Quote form on this page. Include your required quantity, approved vendor list, target date, and whether the 14-pin TSSOP package is acceptable. This avoids relying on an outdated inventory indication and lets the quotation reflect the production and distribution status current on the request date.

엔지니어링 참조 데이터: MSP430F2002IPW — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the MSP430F2002IPW when a design needs a 16 MHz, 16-bit RISC controller with 1 KB Flash, 128 B SRAM, a 10-bit ADC, an analog comparator, SPI, I2C, and a compact 14-pin TSSOP package. It is particularly suitable for portable instruments and embedded sensor nodes where five low-power modes can reduce standby demand. Choose the MSP430F2001IPW when the ADC is unnecessary and the comparator plus basic digital control are sufficient. Choose the MSP430F2003IPW when a 16-bit sigma-delta ADC provides a meaningful measurement improvement. Consider MSP430F2011IPW, MSP430F2012IPW, or MSP430F2013IPW when the larger 2 KB Flash budget is more valuable than minimizing memory use. For every substitution, verify the physical pin map, peripheral behavior, interrupt requirements, development-tool support, and low-power timing before production release.

대체품과의 비교

파라미터 이 제품 MSP430F2001IPW MSP430F2003IPW MSP430F2011IPW MSP430F2012IPW MSP430F2013IPW
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Flash Memory 1 KB 1 KB 1 KB 2 KB 2 KB 2 KB

주요 차별점

  • Combines control, measurement, comparison, and serial communication in one 14-pin device (vs MSP430F2001IPW)
  • Higher ADC resolution is available in the same family (vs MSP430F2003IPW)
  • Balanced memory and ADC configuration for compact acquisition systems (vs MSP430F2012IPW)
  • Compact 14-TSSOP implementation for space-constrained boards (vs MSP430F133IPMR)

설계 노트

Place the MCU and its required support components using the manufacturer land pattern for the 14-pin TSSOP. Keep analog inputs away from digital return paths, provide a continuous ground reference, and route decoupling current with a short path to the supply and ground pins. Confirm exposed-pad requirements from the package drawing before release because land-pattern assumptions can create assembly or soldering defects.

Design the supply path for low-voltage MCU operation and validate startup behavior across the full intended voltage range. Place local bulk and high-frequency bypass capacitors at the device entry points, use the capacitor values and placement directed by the manufacturer datasheet, and avoid routing switching-regulator currents through analog-reference areas. The five low-power modes reduce demand only when external peripherals and analog networks are placed in compatible low-leakage states.

Do not treat the MSP430F2002IPW as a general-purpose MCU with ample memory: its 1 KB Flash and 128 B SRAM impose strict limits on buffering, protocol stacks, and calibration tables. Estimate peak stack depth, use the smallest practical data types, and move bulky data to external storage. Changes to the MSP430F2001IPW or MSP430F2003IPW should include a complete firmware review because ADC and peripheral behavior differ.

Treat SPI and I2C routing as short, continuous communication paths, especially when the MSP430F2002IPW operates at 16 MHz. Match trace lengths where timing margins are narrow, avoid crossing switching-node boundaries, and keep pull-up placement close to the relevant bus devices. The ADC reference and analog input paths require separate attention from digital bus routing to prevent coupling from introducing measurement errors.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page and family datasheet identify the device and its quality information, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were included. AEC-Q100 is not applicable to this general-purpose microcontroller.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

MSP430F2002IPW datasheet MSP430F2002IPW pinout MSP430F2002IPW datasheet pdf MSP430F2002IPW specifications MSP430F2002IPW price MSP430F2002IPW stock Texas Instruments MSP430F2002IPW MSP430F2002 16MHz 1KB Flash MSP430F2002IPW 14-TSSOP pinout MSP430F2002IPW replacement MSP430F2002IPW vs MSP430F2003IPW MSP430F2002IPW low power sensor MSP430F2002IPW equivalent where to buy MSP430F2002IPW MSP430F2002IPW lead time

관련 부품 & 용어

Texas Instruments MSP430F2002IPW MSP430F2001IPW MSP430F2003IPW MSP430F2011IPW MSP430F2012IPW MSP430F2013IPW MSP430 microcontroller mixed-signal microcontroller 16-bit RISC CPU embedded control 10-bit ADC analog comparator SPI I2C ultra-low-power mode 1 KB Flash memory 128 B SRAM 16 MHz clock 14-TSSOP package surface-mount package portable measurement battery-powered sensor node
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기