MSP430F438IPN - 8MHz 16-Bit MCU with 48KB Flash | TI
부품 번호: MSP430F438IPN ✓ 활성MSP430F438IPN 개요
A mixed-signal microcontroller is a semiconductor that integrates a digital processing core with analog measurement and output resources on one device. The MSP430 family belongs to the hierarchy of microcontroller, embedded processor, and semiconductor products. Its 16-bit RISC architecture, timer resources, communication peripherals, and low-power operating modes allow a compact design to acquire analog signals, process them locally, communicate with external equipment, and control an output without requiring a separate analog front end or communications processor.
The verified device specification identifies an 8 MHz maximum clock, 48 KB Flash, 2 KB SRAM, a 12-bit ADC, comparator, SPI, UART, and 128-segment LCD support. The MSP430F438IPN operates from -40°C to +85°C and is supplied in an 80-pin LQFP (PN) package measuring 12 mm by 12 mm. The large package exposes the mixed-signal, communication, timer, debug, and LCD-related resources needed by applications with numerous external connections.
The CPU16 core is designed for efficient control and measurement workloads. Its 16-bit arithmetic and register organization support compact data handling, while the integrated ADC allows an analog sensor to be digitized without a separate converter. Comparator and timer resources can support threshold detection, event timing, motor control, and periodic sampling. SPI and UART connectivity permits connection to sensors, displays, data loggers, wireless modules, and service interfaces.
Typical uses include industrial panel meters, portable environmental monitors, laboratory instruments, data acquisition front ends, and embedded measurement equipment with segmented displays. The 128-segment LCD capability is particularly useful for compact numeric or alphanumeric instrument panels where a dot-matrix display would be unnecessarily costly or power-hungry. A system can therefore place sensing, local processing, human-interface feedback, and serial communication in one controller.
When designing around this MCU, verify every peripheral signal against the manufacturer datasheet and provide adequate decoupling, programming access, reset behavior, and analog-input conditioning. The 80-pin LQFP footprint is relatively large compared with modern QFN packages, so the choice should account for board area and assembly cost. Firmware should also include brownout, watchdog, and clock-startup safeguards when field reliability is important.
This page consolidates verified manufacturer and distributor information, package details, procurement data, selection guidance, and engineering considerations that help distinguish the MSP430F438IPN from related MSP430 devices without implying unverified drop-in replacements.
드롭인 대체품: MSP430F438IPN — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MSP430F438IPN (동일 폼 팩터 및 풋프린트) — 차이점: Package, SRAM.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MSP430F438IPN 최대 정격 & 전기적 특성
| CPU Architecture | 16-bit RISC (MSP430 CPU16) |
| 최대 클록 주파수 | 8 MHz |
| Flash Memory | 48 KB |
| SRAM | 2 KB |
| ADC Resolution | 12 bit |
| Comparator | Integrated |
| Serial Interfaces | SPI and UART |
| LCD Support | 128-segment LCD |
| 패키지 | 80-pin LQFP (PN), 12 mm x 12 mm |
| 동작 온도 | -40°C to +85°C |
| 실장 유형 | Surface Mount |
| RAM Retention Current | 0.1 µA |
| Wake-Up Time from Standby | Less than 6 µs |
| Instruction Cycle Time | 125 ns |
MSP430F438IPN 80-pin lqfp (pn), 12 mm x 12 mm 핀 구성 가이드
MSP430F438IPN(80-pin lqfp (pn), 12 mm x 12 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MSP430F438IPN.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MSP430F438IPN 적합 용도: 6 애플리케이션s: Industrial Panel Meter, Portable Environmental Monitor, Industrial Data Acquisition, Laboratory Instrument Control, Battery-Powered Sensor Node, Communication and Control Module.
Industrial Panel Meter
The MSP430F438IPN fits an industrial panel meter because it combines an 8 MHz 16-bit processor, 12-bit ADC, comparator, and 128-segment LCD controller in one device. A sensor signal can be sampled and converted while the MCU manages thresholds, calibration, and local display updates. Its 48 KB Flash provides room for measurement routines, compensation tables, menus, and communication firmware, while 2 KB of SRAM supports working state and buffers. According to Texas Instruments, the -40°C to +85°C rated device is intended for mixed-signal control and display-oriented embedded systems.
추천
Portable Environmental Monitor
The MSP430F438IPN supports a compact environmental monitor by combining low-power 16-bit processing with integrated analog measurement. The 12-bit ADC can digitize outputs from temperature, humidity, or gas sensors, while the comparator can detect threshold crossings without continuous software polling. Its 48 KB Flash is sufficient for calibration coefficients, smoothing algorithms, data logging, and a serial protocol stack. The verified standby wake-up time of less than 6 µs and RAM-retention current of 0.1 µA are useful when the product spends most of its operating life between measurements.
추천
Industrial Data Acquisition
The MSP430F438IPN is appropriate for a compact data-acquisition front end where an 8 MHz 16-bit CPU, 48 KB Flash, and 12-bit ADC must coexist in a modest controller. SPI can connect to a higher-resolution external converter or digital sensor, while UART provides a simple service or logging link. The two-kilobyte SRAM supports acquisition buffers and working variables, and the comparator can support out-of-range detection. According to the Texas Instruments family summary, the integrated comparator, SPI, and UART reduce the need for separate interface components while retaining 128-segment display capability for local status.
추천
Laboratory Instrument Control
The MSP430F438IPN can serve as the control and measurement processor in a laboratory instrument with a local segment display. Its 12-bit ADC handles front-panel or sensor measurements, the 48 KB Flash supports calibration tables and instrument-control code, and SPI or UART connects to external modules. According to the verified Texas Instruments description, the 128-segment LCD controller directly supports compact numeric and alphanumeric displays without a separate display driver. The 2 KB SRAM provides working storage, while timer and comparator resources can coordinate measurement windows, thresholds, and repetitive control sequences.
추천
Battery-Powered Sensor Node
The MSP430F438IPN supports battery-powered sensor-node designs by combining mixed-signal measurement, serial connectivity, and low-power operating modes in one MCU. Its 8 MHz CPU provides a 125 ns instruction-cycle time for responsive foreground processing, while standby wake-up in less than 6 µs helps limit the energy penalty of periodic sampling. The integrated 12-bit ADC removes the need for a separate converter in many sensor interfaces. According to the verified family information, the device also includes five power-saving modes, although the complete current-versus-temperature data must be checked before final battery-life calculations.
추천
Communication and Control Module
The MSP430F438IPN can act as the local control engine in a communication module that must acquire a signal, validate it, and forward information through a serial interface. Its 48 KB Flash leaves space for protocol handling and application code, while the 12-bit ADC and comparator support input conditioning and threshold decisions. According to Texas Instruments, the device provides SPI and UART alongside the 128-segment LCD controller. The resulting integration can simplify a front panel that combines live measurements, operator feedback, and service communication, although timing and interrupt requirements should be verified against the complete data sheet.
추천
추천 제품 요약
엔지니어링 참조 데이터: MSP430F438IPN — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 80-pin LQFP (PN), 12 mm x 12 mm |
| Brand | Texas Instruments |
| CPU Architecture | 16-bit RISC MSP430 CPU16 |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 48 KB |
| SRAM | 2 KB |
| ADC | 12-bit ADC |
| Peripheral Interfaces | SPI and UART |
| Display Support | 128-segment LCD |
| Operating Temperature | -40°C to +85°C |
주요 차별점
- Three times the verified Flash capacity of the related MSP430F435IPN (vs MSP430F435IPN)
- Integrated mixed-signal resources for instrument-oriented designs (vs MSP430F435IPN)
- Documented extended temperature range for industrial equipment (vs MSP430F435IPN)
설계 노트
Use the manufacturer power recommendations when planning decoupling and supply sequencing. The verified excerpts do not provide the complete supply-voltage range or active and standby current values, so those values must not be inferred from the 8 MHz clock rating. Place the required supply capacitors close to the appropriate power pins, maintain the specified voltage limits, and confirm startup behavior in software before enabling high-load peripherals.
The 80-pin LQFP footprint offers ample access to the mixed-signal and communication signals, but it also requires careful escape routing and a larger board area than a QFN MCU. Follow the exact land pattern and pin assignment in the official data sheet. Keep analog inputs away from switching nodes and noisy serial lines, provide a clean return path for ADC references, and verify the exposed programming and debug connections before committing the layout.
Do not treat the MSP430F435IPN as an automatic drop-in substitute merely because both listings identify an 8 MHz MSP430x4xx device in an 80-LQFP package. Its verified 16 KB Flash is 66.7% of the target's 48 KB, and package similarity does not prove equivalent pin assignments, peripherals, or firmware behavior. For the same reason, use the exact MSP430F438IPN.A alias only as the manufacturer describes it. Complete a data-sheet pin, memory, clock, and peripheral review before approving any substitute.
The verified excerpts provide standby wake-up below 6 µs and 0.1 µA RAM-retention current, but they omit the full current table. Do not calculate battery life from these isolated figures alone. Determine the relevant operating mode, temperature, clock configuration, analog activity, and peripheral loading from the manufacturer data sheet, then include regulator quiescent current and sensor load in the system-level estimate.
규정 준수 정보
The verified excerpts do not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is recorded as not applicable because this ordering information describes a standard industrial-temperature MSP430 variant rather than an explicitly automotive-qualified option.
