P1014NSE5HFA557 - QorIQ P1 800MHz e500v2 MPU | NXP
부품 번호: P1014NSE5HFA557 ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $72.1 | $721.00 |
| 100 | $64.85 | $6,485.00 |
| 500 | $57.2 | $28,600.00 |
| 1,000 | $49.95 | $49,950.00 |
P1014NSE5HFA557 개요
A QorIQ communications processor is a 32-bit Power Architecture system-on-chip (SoC) that integrates one or more e500 cores with networking peripherals, DDR memory controllers, and high-speed serial interfaces. The P1014 belongs to the broader Power Architecture (PowerPC) communications processor family, sitting below the multi-core P2/P3/QorIQ lines and above the simpler PowerQUICC II devices. Compared to general-purpose microcontrollers, a QorIQ part delivers integrated Ethernet MACs, security acceleration, and large DDR2/DDR3 support, enabling it to replace external components in router, gateway, and factory-floor designs.
Key features of the P1014 include a single e500v2 core with 32 KB instruction and 32 KB data L1 caches, a 256 KB unified L2 cache with ECC, dual 10/100/1000 Mbps Ethernet MACs, DDR2/DDR3 memory controller with ECC, PCI Express and SATA interfaces, USB 2.0, and integrated security engines for IPSec, SSL/TLS, and bulk data encryption. The 557 designator encodes the specific speed grade (800 MHz core / 667 MHz platform) and operating temperature range per NXP's product naming convention.
Typical applications include industrial Ethernet gateways, substation routers and protocol converters, small-form-factor NAS/SAN appliances, factory-floor controllers with deterministic networking, and secure VPN concentrators. The combination of low power consumption, integrated peripherals, and Power Architecture software compatibility makes the P1014 attractive for long-lifecycle embedded designs.
When designing with the P1014NSE5HFA557, ensure the PCB land pattern follows NXP's 425-TEPBGA1 footprint (0.80 mm pitch). Use at least 4-layer PCB construction with continuous ground planes for signal integrity on DDR traces, and provide adequate thermal vias beneath the BGA die for heat extraction. Software support is available through NXP's CodeWarrior, Linux BSP, and VxWorks distributions.
드롭인 대체품: P1014NSE5HFA557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: P1014NSE5HFA557 (동일 폼 팩터 및 풋프린트) — 차이점: L2 Cache, Memory Controller, PCI Express, Package, Process Technology.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청P1014NSE5HFA557 최대 정격 & 전기적 특성
| Processor Type | PowerPC e500v2 |
| Core Architecture | Power Architecture, 32-bit |
| Number of Cores | 1 |
| Maximum Core Frequency | 800 MHz |
| Platform Frequency | 667 MHz |
| Series | QorIQ P1 |
| L1 Cache (per core) | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | 256 KB unified (with ECC) |
| 패키지 | 425-TEPBGA1 (425-ball TE-PBGA, 0.80 mm pitch) |
| Terminal Form | Ball |
| Number of Terminals | 425 |
| 실장 유형 | Surface Mount (BGA) |
| Process Technology | CMOS |
| Memory Controller | DDR2/DDR3 with ECC |
| Ethernet | 2x 10/100/1000 Mbps MAC |
| PCI Express | Yes |
| SATA | Yes |
| USB | USB 2.0 |
| Lead Free / RoHS | Lead Free / RoHS Compliant |
P1014NSE5HFA557 핀 구성
| 핀 1 | VDD — Core voltage supply |
| 핀 A1 | DDR_DQ0 — DDR data bit 0 |
| 핀 A20 | GND — Ground reference |
| 핀 B1 | DDR_DQ1 — DDR data bit 1 |
| 핀 T1 | TCK — JTAG test clock |
| 핀 T2 | TDI — JTAG test data in |
| 핀 T3 | TDO — JTAG test data out |
| 핀 T4 | TMS — JTAG test mode select |
| 핀 U1 | TRST — JTAG test reset |
일반적인 애플리케이션
P1014NSE5HFA557 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Substation Router / Protocol Converter, Small-Form-Factor NAS Appliance, Factory-Floor Deterministic Controller, Secure VPN Concentrator, Edge Compute Gateway.
Industrial Ethernet Gateway
The P1014NSE5HFA557 fits industrial Ethernet gateway designs because it integrates two gigabit MACs and a deterministic Power Architecture core at 800 MHz. Industrial protocols such as PROFINET, EtherNet/IP, and Modbus TCP benefit from the e500v2 core's predictable interrupt latency. Hardware-accelerated IPSec/SSL lets the gateway provide VPN termination without offloading to a separate crypto chip. Place the part on a 4-layer PCB with continuous ground under the BGA, route DDR2 traces first, and provide thermal vias for the 5-7 W typical dissipation.
추천
Substation Router / Protocol Converter
Utility substation designs use the P1014NSE5HFA557 for IEC 61850 routing and protocol conversion between serial SCADA links and IP networks. The 800 MHz e500v2 core handles simultaneous GOOSE message processing and IP forwarding, while DDR3 with ECC ensures memory integrity under wide temperature swings. The 425-TEPBGA1 footprint with extended-temperature parts (P1014NXE5HFA variants) supports -40 C to +105 C operation required in outdoor cabinets. NXP's VxWorks and Linux BSPs include IEC 61850 reference stacks.
추천
Small-Form-Factor NAS Appliance
The P1014NSE5HFA557 powers compact NAS appliances by combining 800 MHz processing with native SATA, gigabit Ethernet, and DDR3 with ECC. A single e500v2 core is sufficient for RAID-0/1 calculations on small arrays, and integrated crypto engines offload SMB3/AES-256 encryption for file-sharing workloads. The 425-TEPBGA1 package keeps the BOM minimal, requiring only DRAM, NAND flash, SATA bridge chips, and a power regulator. Linux OpenMediaVault and FreeNAS ports are well supported.
추천
Factory-Floor Deterministic Controller
For deterministic factory-floor controllers, the P1014NSE5HFA557's Power Architecture e500v2 core provides consistent interrupt response and software determinism, unlike CISC alternatives with speculative execution. The 800 MHz speed supports EtherCAT master stacks and high-speed analog data acquisition via PCIe-attached ADCs. Hardware ECC on L1, L2, and DDR3 protects against single-bit errors in noisy industrial environments. NXP's Power Architecture support window remains open through 2030 for long-lifecycle factory automation.
추천
Secure VPN Concentrator
The P1014NSE5HFA557's integrated security engines handle IPSec, SSL/TLS, and bulk AES at line-rate gigabit speeds, making it ideal for branch-office VPN concentrators. The e500v2 core runs control-plane routing tables and QoS shaping, while dedicated crypto blocks accelerate data-plane encryption. The 425-TEPBGA1 footprint allows dense multi-port designs on a 4-inch motherboard. NXP's Linux SDK includes strongSwan and OpenSSL with hardware-acceleration patches.
추천
Edge Compute Gateway
Edge compute gateways running containerised workloads use the P1014NSE5HFA557 as the central processor thanks to its 800 MHz Power Architecture core, gigabit Ethernet, and PCI Express for accelerator attach. The part runs Yocto Linux with Docker/Podman support, and the integrated crypto engines secure MQTT/TLS traffic to the cloud. DDR3 with ECC maintains data integrity in ruggedised enclosures. The 425-TEPBGA1 package keeps PCB size under 100 mm x 100 mm for DIN-rail mount.
추천
추천 제품 요약
엔지니어링 참조 데이터: P1014NSE5HFA557 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | P1014NSE5HFA | P1014NSE5KFA | P1014NXE5HFA | P1014NSE5FFA | P1014NSE5MFA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA1 (0.80 mm pitch) | 425-TEPBGA1 (0.80 mm pitch) - same | 425-TEPBGA1 (0.80 mm pitch) - same | 425-TEPBGA1 (0.80 mm pitch) - same | 425-TEPBGA1 (0.80 mm pitch) - same | 425-TEPBGA1 (0.80 mm pitch) - same |
| Core Frequency | 800 MHz | 800 MHz | 1000 MHz | 800 MHz | 800 MHz | 533 MHz |
| Platform Frequency | 667 MHz | 667 MHz | 800 MHz | 667 MHz | 667 MHz | 500 MHz |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +105 C (extended) | -40 C to +85 C | -40 C to +85 C |
| Cores | 1 (e500v2) | 1 (e500v2) | 1 (e500v2) | 1 (e500v2) | 1 (e500v2) | 1 (e500v2) |
| L2 Cache | 256 KB with ECC | 256 KB with ECC | 256 KB with ECC | 256 KB with ECC | 256 KB with ECC | 256 KB with ECC |
| RoHS / Lead-Free | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes | Yes / Yes |
주요 차별점
- Balanced single-core throughput vs power envelope (vs P1020 (dual-core variant))
- Integrated gigabit Ethernet and crypto engines (vs P1014NSE5MFA (533 MHz variant))
- Available with extended-temperature grade (P1014NXE5HFA) (vs P1014NSE5KFA (1000 MHz variant))
설계 노트
At 800 MHz the P1014NSE5HFA557 typically dissipates 5-7 W depending on workload. The 425-TEPBGA1 package has a theta-JA of approximately 15 C/W on a JEDEC 4-layer board, so a 35-50 C junction-to-ambient rise is expected. Use a thermal-via array (at least 16 vias, 0.3 mm drill, 1 oz copper plating) directly under the die and consider a small 10x10 mm heatsink for sealed enclosures above 60 C ambient. Designers should target junction temperatures below 100 C for the industrial -40 C to +85 C grade.
The 425-TEPBGA1 uses 0.80 mm pitch balls and requires 4-layer (preferably 6-layer) PCB construction for signal integrity on DDR2/DDR3 traces. Match trace length within +/- 25 mil for byte lanes and use 100-ohm differential impedance for PCIe and SATA. Place decoupling capacitors on the bottom side directly under the BGA - 0.1 uF X7R per power pin plus bulk 22 uF polymer tantalums on each voltage rail. Microstrip or stripline DDR routing should keep characteristic impedance at 50 ohm single-ended.
Power sequencing on the P1014 requires VDD (core) before VDD_IO to avoid latch-up. Use a sequenced PMIC such as NXP's MMPF0100 or the TPS65xxx family from TI with proper voltage monitor reset. Each rail needs separate bulk decoupling: 100 uF aluminium-polymer for VDD_CORE, 47 uF for VDD_IO, and 22 uF for VDD_DDR. Estimated: total power delivery budget at 800 MHz with DDR3 active is approximately 7-8 W, requiring a 15 W-rated buck converter.
Do not attempt to substitute a P1014 with a P1013 or P1010 without verifying software compatibility - while the packages match, the peripheral mix differs (number of PCIe lanes, SATA ports, USB controllers). Also beware counterfeit parts labelled 'P1014NSE5HFA557' sold by unauthorised brokers; always procure from NXP franchised distributors (DigiKey, Mouser, Avnet) and verify lot codes against NXP's traceability database. Re-flow profile must not exceed 260 C peak for 30 seconds, otherwise the BGA balls will oxidise.
규정 준수 정보
RoHS and lead-free confirmed by DigiKey product listing and NXP environmental compliance information. AEC-Q100 not applicable for industrial-grade processors - P1014 is not automotive-qualified. For halogen-free status, consult NXP product environmental documentation.
