P1014NXN5HHA557 - 800MHz QorIQ P1 MPU, 32-Bit PowerPC | NXP
부품 번호: P1014NXN5HHA557 ✓ 활성P1014NXN5HHA557 개요
A microprocessor (MPU) is the central processing unit of an embedded system, integrating one or more CPU cores, cache, memory controllers, and a wide variety of peripheral interfaces on a single die. Within the embedded taxonomy, an MPU sits below a microcontroller (which typically adds on-chip flash and a smaller pin count) and above a discrete CPU + chipset combination, and it is commonly classified under the broader semiconductor / integrated circuit hierarchy. The QorIQ P1 series extends this hierarchy into the communications-processing segment, with the P1014 positioned as a low-power, single-core member for fanless or thermconstrained designs.
Key features of the P1014NXN5HHA557 include a 32-bit e500v2 core with hardware double-precision floating-point support, integrated 32 KB L1 instruction and data caches, a 256 KB L2 cache, dual Gigabit Ethernet controllers with hardware acceleration, and DDR3/DDR3L memory controller support. The 800 MHz core delivers strong single-thread performance while the low-power design keeps typical power dissipation well below 1 W for thermally constrained enclosures.
The P1014 architecture combines an out-of-order execution pipeline with a coherent crossbar fabric, allowing efficient on-chip traffic between the core, L2 cache, and integrated peripherals. NXP's proven e500v2 core and TEPBGA-I package provide robust thermal performance for industrial-grade environments, and the device supports multiple boot options including NAND flash, SPI, and SD/MMC interfaces.
Typical applications include industrial gateways, networked printers, factory automation controllers, smart-grid energy management systems, and low-end LTE/4G small-cell base stations where the combination of Gigabit Ethernet, hardware crypto, and low power dissipation is highly valued.
Designers should plan for a multi-rail power architecture and follow NXP's reference PCB layout for the TEPBGA-I package, paying particular attention to the high-speed DDR3 routing constraints and thermal dissipation through the package's thermal balls.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
드롭인 대체품: P1014NXN5HHA557 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: P1014NXN5HHA557 (동일 폼 팩터 및 풋프린트) — 차이점: Ethernet, Memory Controller, Core Architecture, Manufacturer, Mounting Type.
P1014NXN5HHB
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
P1014NSE5HHA
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →P1014NXE5HHA
✅ 드롭인 ⚠️ 사양 미검증가격 문의
데이터시트 보기 →P1014NXN5HFB
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
P1010NXN5HHA
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
P1014NXN5HHA557 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors |
| Product Family | QorIQ P1 |
| Core Architecture | PowerPC e500v2 |
| Number of Cores | 1 |
| Data Width | 32-bit |
| Maximum Core Frequency | 800 MHz |
| L1 Cache (I/D) | 32 KB / 32 KB |
| L2 Cache | 256 KB |
| Memory Controller | DDR3 / DDR3L (with ECC support per datasheet) |
| Ethernet | Dual 10/100/1000 Mbps MAC with hardware acceleration |
| Package Type | 425-TEPBGA-I (19x19 mm) |
| Terminal Pitch | 0.80 mm |
| JEDEC Package Code | S-PBGA-B425 |
| 공급 전압 | Multi-rail (per datasheet - core + I/O) |
| 동작 온도 범위 | -40C to +105C (industrial) |
| Process Technology | CMOS |
| 실장 유형 | Surface Mount |
| RoHS 상태 | Compliant |
| Lead-Free | Yes |
P1014NXN5HHA557 s-pbga-b425 핀 구성 가이드
P1014NXN5HHA557(s-pbga-b425 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: P1014NXN5HHA557.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
P1014NXN5HHA557 적합 용도: 6 애플리케이션s: Industrial Ethernet Gateway, Smart Grid Energy Management Controller, Factory Automation PLC, Low-End LTE/4G Small Cell Base Station, Networked Multifunction Printer Controller, Routers and Security Appliances.
Industrial Ethernet Gateway
The P1014NXN5HHA557 fits industrial Ethernet gateway designs because its dual Gigabit Ethernet MACs with hardware checksum offload and 800 MHz e500v2 core deliver full wire-speed routing on managed industrial protocols such as EtherNet/IP and PROFINET. The 425-TEPBGA-I 19x19 mm package and DDR3 controller provide a compact, thermally efficient footprint for DIN-rail enclosures. Compared to a switch-mode SoC, the P1014 runs Linux and a full routing stack, while still staying within a 5-8 W power envelope for fanless operation. Designers pair the device with a small NOR boot flash plus managed Ethernet PHYs to realize a hardened industrial gateway.
추천
Smart Grid Energy Management Controller
The P1014NXN5HHA557 is well-suited to smart-grid energy management controllers, where its 32-bit e500v2 core runs metering aggregation, IEC 61850 protocol stacks, and DLMS/COSEM communications with deterministic latency. The hardware encryption accelerators offload AES, DES, and SHA operations critical to grid security. The industrial -40C to +105C temperature grade and TEPBGA-I package allow conformal-coated assemblies in outdoor cabinets. Drop-in compatibility with other P1014 order codes enables long-life procurement under the NXP PLP program.
추천
Factory Automation PLC
In factory automation PLCs, the P1014NXN5HHA557 drives deterministic motion, I/O scan, and EtherCAT master stacks thanks to its real-time Linux support, 800 MHz single-core throughput, and integrated peripheral set. The 425-TEPBGA-I 19x19 mm package fits compact PLC backplanes and the DDR3 controller provides low-latency access to working memory. Compared to microcontroller-based PLCs, the P1014 adds gigabit networking and richer HMI capability without sacrificing real-time determinism. The exposed thermal balls simplify thermal dissipation in IP67 sealed cabinets.
추천
Low-End LTE/4G Small Cell Base Station
The P1014NXN5HHA557 supports low-end LTE/4G small-cell base station designs, where its hardware crypto, dual GbE, and 800 MHz e500v2 core handle the Layer 2/3 control plane and OAM traffic of a femtocell or enterprise small cell. The DDR3L memory controller with ECC support provides the bandwidth needed for protocol stack buffering. The industrial-grade 425-TEPBGA-I 19x19 mm package enables compact, sealed radio units. P1014 software is widely supported by mainstream small-cell software stacks, simplifying time-to-market.
추천
Networked Multifunction Printer Controller
The P1014NXN5HHA557 is a strong fit for networked multifunction printer controllers because the 800 MHz e500v2 core executes the print pipeline, scan-to-email processing, and embedded web interface simultaneously. Integrated USB, SATA, and dual GbE provide direct attachment to printer engines and the office network. The TEPBGA-I 19x19 mm package is small enough to fit inside the printer's mainboard. Lower-power operation allows the printer to meet Energy Star and typical office noise targets without active cooling.
추천
Routers and Security Appliances
The P1014NXN5HHA557 powers small-form-factor routers and security appliances, where its hardware-accelerated encryption (AES, 3DES, SHA, MD5), dual GbE, and 800 MHz e500v2 throughput handle VPN, firewall, and IPSec workloads at small-office scale. The DDR3 controller provides ample bandwidth for concurrent flows. The TEPBGA-I package allows compact mainboards with the device paired against discrete switch fabric and PHYs. This makes the part attractive for VPN concentrators and small-business UTM appliances.
추천
추천 제품 요약
엔지니어링 참조 데이터: P1014NXN5HHA557 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | P1014NXN5HHB | P1014NSE5HHA | P1014NXE5HHA | P1014NXN5HFB | P1010NXN5HHA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 425-TEPBGA-I (19x19 mm) | 425-TEPBGA-I (19x19 mm) - same | 425-TEPBGA-I (19x19 mm) - same | 425-TEPBGA-I (19x19 mm) - same | 425-TEPBGA-I (19x19 mm) - same | 425-TEPBGA-I (19x19 mm) - same |
| Core Architecture | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 | PowerPC e500v2 |
| Number of Cores | 1 | 1 | 1 | 1 | 1 | 1 |
| Maximum Core Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 533 MHz |
| L2 Cache | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Gigabit Ethernet MACs | 2 | 2 | 2 | 2 | 2 | 2 |
| Operating Temperature Range | -40C to +105C (industrial) | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| RoHS Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
주요 차별점
- Single-core 800 MHz e500v2 with hardware crypto in a compact 425-ball BGA (vs P1010NXN5HHA)
- Integrated dual Gigabit Ethernet MACs with hardware acceleration (vs P1014NXN5HHB)
- Long-life industrial-grade silicon under NXP PLP (vs Microcontroller-based industrial MPU (e.g., K64-class))
설계 노트
The 425-TEPBGA-I 19x19 mm package exposes thermal balls on the bottom side that MUST be soldered to a copper-pour thermal pad connected to the inner ground plane. Estimate: with proper 1 oz copper thermal pad and 4-layer FR-4 board, theta_JA is on the order of 12-18 C/W. At full 800 MHz throughput the device can dissipate 5-8 W, so for fanless designs route at least 4 inner ground layers under the device and use 12-15 thermal via arrays.
DDR3 routing requires matched-length, impedance-controlled traces (50 ohm single-ended, 100 ohm differential for clocks). Reference NXP's AN3944 hardware design guide for the QorIQ P1 series. Place the DDR3 memories on the same side of the PCB as the MPU, and keep trace lengths matched within +/-25 mil. Provide at least 4 decoupling capacitors (0.1uF, 1nF, 10uF) per power rail within 100 mil of the BGA balls.
Multi-rail power architecture is required: separate rails for core, DDR3 I/O, and GbE I/O. Use a sequenced power-up scheme per NXP's power-on requirements. A common choice is the TPS54331 (3 A buck) for the core rail and an LDO for GbE PHY supply. Estimated: keep total core-rail noise below 3% to avoid impacting the GbE PHY's CDR performance.
Avoid counterfeit parts: the P1014NXN5HHA557 is a high-value, niche embedded MPU and is frequently targeted by remarking. Always procure from NXP authorized distributors (DigiKey, Avnet, Mouser, Rochester Electronics). Verify the laser-etched lot code on the BGA top with a 10x loupe and cross-check the shipment against NXP's original factory reel labels.
규정 준수 정보
RoHS compliance per verified distributor listing. AEC-Q100 is not applicable for industrial-grade networking MPU; this device is qualified to industrial-grade temperature and reliability standards rather than automotive.
