P2020NSN2HHC - QorIQ P2020 Dual-Core 800MHz SoC | NXP
부품 번호: P2020NSN2HHC ⚠ 최종 구매| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $178.5 | $178.50 |
| 10 | $165.2 | $1,652.00 |
| 100 | $148.75 | $14,875.00 |
| 250 | $138.4 | $34,600.00 |
| 500 | $129.9 | $64,950.00 |
P2020NSN2HHC 개요
A QorIQ communications processor is a multicore system-on-chip (SoC) built on Power Architecture technology, designed for routing, switching, security, and industrial control applications. The QorIQ family (P1, P2, P3, P4, P5 tiers) sits in the broader hierarchy of embedded microprocessors → microcontrollers / MPUs → system-on-chip → communications processors, providing integrated networking peripherals that historically required multiple companion ICs.
Key features of the P2020NSN2HHC include two e500v2 cores at 800 MHz each, DDR2/DDR3 memory controller with ECC support, three 10/100/1000 Mbps Enhanced Gigabit Ethernet controllers, PCI Express interfaces, Serial RapidIO, USB 2.0, and an operating temperature range of 0°C to +125°C. The R2.1 stepping ensures silicon revision consistency for production deployment. Hardware encryption and true random number generation are integrated for IPsec, SSL/TLS, and other security workloads.
At the architectural level, the P2020 combines two independent e500v2 cores with shared L2 cache, a high-bandwidth CoreNet coherency fabric, and dedicated acceleration engines. Built on a 45 nm process, the device balances clock speed with power dissipation, typically operating below 8 W in networking workloads. The integrated memory controller reduces external component count while ECC support mitigates soft-error risk in telco-class deployments.
Typical applications include industrial routers and gateways, network attached storage controllers, factory automation controllers, line cards for access and aggregation switches, secure VPN appliances, and single-board computing for defense and aerospace systems where the extended -40°C to +125°C junction range and Power Architecture ecosystem matter.
When designing with the P2020NSN2HHC, validate that the chosen TEBGA II substrate supports 1.2 GHz cores (the P2020 silicon is pin-compatible across the P1/P2 family). Provide adequate cooling through the exposed pad and ensure DDR3 signal integrity is verified with the manufacturer's reference design guidelines.
This page synthesizes distributor pricing, drop-in compatible NXP QorIQ family variants, and application guidance drawn from the official NXP product page — information not consolidated on a single vendor datasheet.
드롭인 대체품: P2020NSN2HHC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: P2020NSN2HHC (동일 폼 팩터 및 풋프린트) — 차이점: Ethernet, Mounting Type, Operating Temperature, PCI Express, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
P2020NXN2KHC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P2020PSE2MFC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P2020NSN2MHC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P2020NSN2MFC
✅ 드롭인✓ 재고 있음
$31.2 / 개
데이터시트 보기 →P2010NXN2HHC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P2010NSN2MHC
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P2020NSN2HHC 최대 정격 & 전기적 특성
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | QorIQ P2 |
| Core Processor | PowerPC e500v2 |
| Number of Cores | 2 |
| Core Frequency | 800 MHz per core (max 1.33 GHz for family) |
| Bus Width | 32-bit |
| 패키지 / 케이스 | 689-TEPBGA II (31x31 mm) with exposed pad |
| 실장 유형 | Surface Mount |
| RAM Controllers | DDR2, DDR3 with ECC |
| Ethernet | 10/100/1000 Mbps (3x Enhanced Three-Speed Ethernet) |
| PCI Express | Yes (multiple lanes) |
| Serial RapidIO (SRIO) | Yes |
| USB | USB 2.0 |
| Graphics Acceleration | No |
| 동작 온도 | 0°C to +125°C |
| Silicon Revision | R2.1 |
| Process Technology | 45 nm |
| Lead Free Status | Lead Free |
| RoHS 상태 | RoHS Compliant |
| Packaging | Tray |
P2020NSN2HHC 689-tepbga ii (31x31 mm) with exposed pad 핀 구성 가이드
P2020NSN2HHC(689-tepbga ii (31x31 mm) with exposed pad 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: P2020NSN2HHC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
P2020NSN2HHC 적합 용도: 6 애플리케이션s: Industrial Routers and Gateways, Network Attached Storage (NAS) Controllers, Factory Automation and Industrial Control, Access and Aggregation Switch Line Cards, Secure VPN and IPsec Appliances, Defense and Aerospace Embedded Computing.
Industrial Routers and Gateways
The P2020NSN2HHC's dual 800 MHz e500v2 cores and three integrated Gigabit Ethernet controllers make it a strong fit for industrial routers and protocol-conversion gateways. Its DDR3 with ECC controller mitigates soft errors in 24/7 field deployments, while the 0-125C operating range covers outdoor cabinet and factory floor environments. Compared to single-core alternatives, the dual-core architecture allows separate processing of control-plane routing (e.g., BGP/OSPF) and data-plane packet inspection (e.g., NAT, firewall) on independent cores without context-switch overhead. The PCI Express and Serial RapidIO links enable connection to switch fabrics, crypto accelerators, or wireless modem cards.
추천
Network Attached Storage (NAS) Controllers
For entry-level and mid-range NAS controllers, the P2020NSN2HHC delivers the dual-core compute needed to run a storage OS (Linux, embedded BSD) plus RAID, file-system (ZFS, ext4, Btrfs) and SMB/NFS/iSCSI protocol stacks simultaneously. The integrated DDR3 controller with ECC protects against silent data corruption that would otherwise be unacceptable in storage arrays. The three Gigabit Ethernet ports enable link-aggregation or multi-VLAN segmentation between management, data, and replication traffic. PCI Express lanes attach SATA/SAS controller ASICs for 4-8 drive bays typical of SMB NAS products.
추천
Factory Automation and Industrial Control
The P2020NSN2HHC suits factory automation controllers that require deterministic networking with multi-protocol support: EtherCAT, PROFINET, EtherNet/IP, and Modbus TCP can all terminate on its Ethernet controllers. The 0-125C industrial temperature range and lead-free, RoHS-compliant TEBGA II package meet harsh-environment manufacturing requirements. Dual e500v2 cores allow one core to run a real-time control loop while the other manages HMI, data logging, and MES (Manufacturing Execution System) connectivity. PCI Express interfaces support frame-grabber cards, motor-control FPGAs, or industrial I/O expansion.
추천
Access and Aggregation Switch Line Cards
In access and aggregation switches, the P2020NSN2HHC serves as the line-card management and forwarding CPU. Its Serial RapidIO and PCI Express interfaces connect to switching ASICs (e.g., NXP MPC/MCS families), while the three Ethernet ports can carry CPU management traffic, OOB (out-of-band) management, and timing synchronization. The dual cores handle routing-protocol computation (OSPF, BGP, MPLS) and management-plane software (CLI, SNMP, NETCONF) concurrently. ECC memory support and industrial temperature grading address the long-life telco deployment profile.
추천
Secure VPN and IPsec Appliances
For VPN concentrators and IPsec/SSL-TLS gateway appliances, the P2020NSN2HHC's hardware-accelerated crypto engines (AES, DES, 3DES, Kasumi, Snow 3G) and true random number generator deliver line-rate encryption without burdening the e500v2 cores. Dual cores separate control-plane key management (IKEv2, PKI) from data-plane bulk encryption. The three Gigabit Ethernet controllers support WAN, LAN, and DMZ segmentation typical of enterprise VPN concentrators. DDR3 with ECC maintains key-table integrity across reboot cycles.
추천
Defense and Aerospace Embedded Computing
The P2020NSN2HHC's 0-125C operating range, lead-free TEBGA II packaging, and Power Architecture ecosystem make it suitable for defense and aerospace single-board computers (SBCs). The deterministic e500v2 cores support real-time operating systems (VxWorks, INTEGRITY, LynxOS-178) for safety-critical workloads. PCI Express and Serial RapidIO provide robust inter-board links in VPX/OpenVPX backplane architectures. The dual cores enable partitioned ARINC 653 / multi-level-secure (MLS) execution models required in avionics and C4ISR systems.
추천
추천 제품 요약
엔지니어링 참조 데이터: P2020NSN2HHC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | P2020NXN2KHC | P2020PSE2MFC | P2020NSN2MHC | P2010NXN2HHC | P2010NSN2MHC |
|---|---|---|---|---|---|---|
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Architecture | PowerPC e500v2 dual-core | PowerPC e500v2 dual-core | PowerPC e500v2 dual-core | PowerPC e500v2 dual-core | PowerPC e500v2 single-core | PowerPC e500v2 single-core |
| Core Frequency | 800 MHz | 1.0 GHz (bin-dependent) | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| Operating Temperature | 0°C to +125°C | 0°C to +105°C (commercial) | 0°C to +125°C | 0°C to +125°C | 0°C to +105°C | 0°C to +125°C |
| Security Acceleration | Standard crypto engines | Standard crypto engines | Enhanced (PSE) | Standard | Standard | Standard |
| Number of Cores | 2 | 2 | 2 | 2 | 1 | 1 |
주요 차별점
- Dual e500v2 cores at industrial temperature range (0-125C) (vs P2010NXN2HHC)
- R2.1 silicon revision with proven production stability (vs P2020NXN2KHC)
- Extended 0-125C industrial temperature bin (vs P2020NXN2KHC)
- Standard crypto engines for IPsec/TLS workloads (vs P2020PSE2MFC)
설계 노트
The 689-TEPBGA II package uses an exposed die pad that MUST be soldered to the PCB ground plane with sufficient thermal via array to dissipate QorIQ P2020 power. With dual 800 MHz cores active, plan for ~6-8 W typical dissipation. Reference NXP AN3944 (QorIQ Thermal Management) for via-pattern recommendations and PCB copper-pour sizing at minimum 1 oz copper over 4-layer stack-up.
DDR3 signal integrity is critical: follow NXP QorIQ P2 Design Checklist for trace length matching (within 25 mils for byte lanes), reference voltage (VREF) decoupling with 0.1uF + 1uF caps per VTT rail, and series-damping resistors on address/command. Use IBIS models (available on nxp.com) for SI simulation before fab. Trace impedance target: 50 ohm single-ended, 100 ohm differential for SERDES.
Route Serial RapidIO and PCI Express lanes as 100 ohm differential pairs with matched length (within 5 mils intra-pair, 50 mils inter-pair) and keep them away from switching power and clock traces. Place AC-coupling capacitors at the P2020 ball side per lane. Reference NXP AN3947 (SERDES Layout) for board-stack-up and via-stitching recommendations.
Do not assume P2010/P2020 software images are interchangeable — boot ROM and RCW (Reset Configuration Word) differ between single-core and dual-core silicon even with the same pinout. Verify boot source, SERDES protocol (PCIe vs SRIO), and core count via RCW before flashing production firmware. Also confirm JTAG chain order matches your emulator when chaining multiple QorIQ devices.
Use a multi-rail PMIC or discrete regulators that match QorIQ P2020 power sequence: VDD_CORE must ramp before VDD_DDR with monotonic edges. Core voltage (typically 1.0 V) tolerance is +/-5%; DDR3 termination (VTT) must track VDDQ/2. Per NXP AN3945, place at minimum 4x 22uF + 8x 0.1uF decoupling within 50 mils of the BGA balls.
규정 준수 정보
RoHS compliant and lead-free per DigiKey and NXP product page. Not AEC-Q100 qualified — designed for industrial networking/communications, not automotive. Halogen-free status not explicitly listed; confirm with NXP product environmental compliance documentation.
