NXP Semiconductors

PCA9617ADPJ - 1MHz Fm+ I2C Level Shifter | NXP | TSSOP-8

부품 번호: PCA9617ADPJ ✓ 활성
0.8 V to 5.5 V Vdss 8-pin TSSOP Package 1 MHz Speed
MOQ: 1 |

PCA9617ADPJ 개요

NXP Semiconductors PCA9617ADPJ is a bidirectional CMOS I2C-bus repeater and level-translating buffer supporting Fast-mode Plus operation up to 1 MHz, with a low-side voltage range of 0.8 V to 5.5 V, a high-side voltage range of 2.2 V to 5.5 V, and an 8-pin TSSOP package. The device is intended for I2C and SMBus systems that require voltage translation, bus isolation, or extension across voltage domains.

A level-translating I2C buffer is an interface IC that allows two connected bus segments to operate at different logic voltages while preserving bidirectional clock and data communication. Its role within an interface hierarchy is a bidirectional bus repeater, followed by a level translator, followed by an interface IC. Bidirectional channels must actively reproduce the bus state in both directions so that pull-up resistors on each side can establish the correct local voltage.

The PCA9617A supports low-side voltages from 0.8 V to 5.5 V and high-side voltages from 2.2 V to 5.5 V. Its 1 MHz operating capability makes it suitable for Fast-mode Plus I2C traffic, while the independent dual-supply arrangement allows a low-voltage controller to communicate with higher-voltage peripherals. The NXP product is also identified as a one-channel signal buffer or re-driver in distributor catalogs.

The PCA9617A combines level translation with buffering. This allows a bus to remain usable when capacitance, voltage, or topology prevents direct connection between the two sections. Both I2C signal lines pass through the bidirectional repeater, and the enable control referenced to the high-side supply provides a way to place the drivers under system control. The enable state should only be changed while the bus is idle, preventing transitions on active clock or data lines.

Typical applications include separating low-voltage sensors from 3.3 V or 5 V controllers, extending I2C runs across voltage domains, protecting a bus segment from another subsystem, and supporting mixed-voltage system partitioning. The device can also be used in industrial control, instrumentation, communications equipment, and compact embedded systems where a 1 MHz I2C interface crosses between domains with incompatible logic levels.

The primary design consideration is correct pull-up placement. Each bus segment requires pull-up resistors referenced to its own supply voltage, and both sides should be configured for the voltages actually present in the design. The enable pin should be driven only while the I2C bus is idle. PCB layout should keep the two interface sections and their pull-up networks physically distinct to minimize coupling and maintain signal integrity.

This page combines the electrical operating ranges, interface function, package information, comparison guidance, and practical implementation considerations needed to evaluate the PCA9617ADPJ as a drop-in bus-interface candidate.

드롭인 대체품: PCA9617ADPJ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PCA9617ADPJ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Number of Channels, RoHS Status, Function, Bus Compatibility.

NXP Semiconductors
Package: TSSOP-10 (SOT552-1)
Number of Channels: 2 (SDA + SCL)
RoHS Status: Compliant
비교 대상: PCA9617ADPJ →
NXP Semiconductors
Number of Channels: 2 bidirectional I2C bus signals
비교 대상: PCA9617ADPJ →
NXP Semiconductors
Package: 8-pin HWSON (2x3 mm), SMD
Number of Channels: 1
RoHS Status: Compliant (Z suffix, lead-free per NXP ordering-code convention)
비교 대상: PCA9617ADPJ →
Texas Instruments
Package: 8-VSSOP / 8-MSOP (DGK), 3.00 mm body width
Number of Channels: 2 (SCL, SDA)
RoHS Status: Compliant
비교 대상: PCA9617ADPJ →

TCA9617A

✅ 드롭인
📦 TSSOP-8
Equivalent dual-supply Fm+ I2C repeater function; enable polarity, supply-current limits, and exact terminal mapping must be confirmed before PCB reuse

📋 참조 대체품 (카탈로그에 없음)

PCA9617ADPJ 사양

Product Type Level-translating bidirectional I2C-bus repeater
Low-Side Supply Voltage Range 0.8 V to 5.5 V
High-Side Supply Voltage Range 2.2 V to 5.5 V
Maximum Bus Frequency 1 MHz
Supported Bus I2C and SMBus
Supported I2C Speed Fast-mode Plus (Fm+)
Signal Direction Bidirectional
Channel Count 1 channel
Device Architecture CMOS integrated circuit
Enable Function System-controlled driver enable referenced to VCC(B)
패키지 8-pin TSSOP
Package Type TSSOP-8
실장 유형 Surface mount
Packaging Tape and reel
RoHS 상태 unknown
REACH Status unknown

PCA9617ADPJ tssop-8 핀 구성 가이드

PCA9617ADPJ(tssop-8 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

PCA9617ADPJ의 tssop-8 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCA9617ADPJ.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCA9617ADPJ 적합 용도: 6 애플리케이션s: Mixed-Voltage Sensor Interface, I2C Bus Extension, Industrial Control Module, Communications Equipment, Test and Measurement, Embedded System Power Domains.

🧩

Mixed-Voltage Sensor Interface

The PCA9617ADPJ fits when a 1 MHz sensor bus operates at a lower voltage than its controller. Place the repeater between the controller domain and the sensor domain, with each side connected to its own supply and pull-up network. The 0.8 V to 5.5 V low-side range accommodates very-low-voltage sensors, while the 2.2 V to 5.5 V high-side range supports 2.5 V, 3.3 V, or 5 V logic. Compared with a simple two-transistor level shifter, the active bidirectional repeater preserves the clock and data behavior required by Fast-mode Plus traffic while isolating the two bus segments.

🌐

I2C Bus Extension

The PCA9617ADPJ can divide a long or capacitively loaded I2C connection into separate bus segments while retaining operation up to 1 MHz. Each segment should have its own pull-up resistors connected to the supply used by that segment, and the PCA9617A repeater restores valid logic levels between them. This arrangement is useful when cable length, connector loading, or a bank of peripheral capacitance makes a single uninterrupted bus difficult to route reliably. The active buffer also provides controllable segmentation when two subsystems need to be electrically decoupled during part of the operating cycle.

🏭

Industrial Control Module

The PCA9617ADPJ is suitable for industrial control modules that separate a low-voltage sensor or logic island from a 3.3 V or 5 V control domain. Its 1 MHz Fast-mode Plus rating supports faster sensor and configuration traffic, while the independent supply ranges permit each island to use an appropriate voltage. Board partitioning should place the low-side and high-side pull-up networks on their respective supply rails and keep the enable control away from noisy switching nodes. The NXP manufacturer datasheet identifies the enable pin as referenced to VCC(B), so its inactive level must be defined by the high-side supply arrangement.

🌐

Communications Equipment

Communications equipment can use the PCA9617ADPJ to connect a low-voltage controller or transceiver logic section to a higher-voltage I2C peripheral section. The bidirectional repeater allows clock and data to flow in either direction while maintaining separate local voltage domains, which is valuable in line-card, base-station, and network-interface designs. At the 1 MHz operating limit, layout quality remains important: route SCL and SDA as a compact matched pair, terminate each bus segment with its own pull-ups, and avoid placing the repeater beside switching regulators without adequate isolation on the PCB.

🔧

Test and Measurement

The PCA9617ADPJ can separate a low-voltage acquisition or control section from a higher-voltage instrumentation domain in test and measurement systems. The device's 1 MHz rate and dual voltage ranges support I2C configuration traffic for sensors, converters, and programmable front ends while preventing incompatible logic levels from being applied directly. Each instrument-side bus segment needs pull-ups tied to its own reference supply, and the enable pin should only change state while the bus is idle. This allows a designer to preserve a reusable controller board across instruments that use different peripheral-side voltage levels.

⚡

Embedded System Power Domains

The PCA9617ADPJ is useful in an embedded system where a low-voltage domain controls sensors while a separate domain operates higher-voltage logic. The 0.8 V minimum low-side supply supports demanding sub-1 V logic, while the 2.2 V to 5.5 V high-side range accommodates conventional embedded rails. Because the part buffers the bus rather than merely translating a one-way signal, both SCL and SDA remain usable in either direction. Design the power-up sequence so that both supplies are stable before enabling the drivers, and observe the NXP manufacturer datasheet restriction against changing enable state during an active bus transfer.

What is the PCA9617ADPJ and what does it do?
The PCA9617ADPJ is a bidirectional CMOS level-translating I2C-bus repeater that operates up to 1 MHz. According to the NXP manufacturer datasheet, it translates between a low-voltage domain of 0.8 V to 5.5 V and a higher-voltage domain of 2.2 V to 5.5 V. It provides buffering for Fast-mode Plus I2C and SMBus applications and is packaged in an 8-pin TSSOP.
What voltage ranges does PCA9617ADPJ support?
The PCA9617ADPJ supports a low-side supply from 0.8 V to 5.5 V and a high-side supply from 2.2 V to 5.5 V. These ranges are stated in the NXP manufacturer datasheet. Each side should be connected to the supply used by the devices on that bus segment, and each segment needs pull-up resistors referenced to its own supply voltage.
Can PCA9617ADPJ operate at 1 MHz I2C?
Yes, the PCA9617ADPJ supports I2C operation up to 1 MHz. The NXP manufacturer datasheet identifies the device as a Fast-mode Plus level-translating I2C-bus repeater. This bandwidth is useful for sensors, memory devices, and other peripherals operating on a faster I2C segment while the controller remains on a lower-voltage bus domain.
Where can I download the PCA9617ADPJ datasheet PDF?
The official PCA9617A datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/PCA9617A.pdf. The document contains the functional description, supply ranges, enable behavior, electrical characteristics, pin information, and application guidance for the PCA9617A family represented by the PCA9617ADPJ ordering code.
Where can I find the PCA9617ADPJ pinout?
Use the pin-description table and package drawing in the official NXP PCA9617A manufacturer datasheet. The PCA9617ADPJ is identified in distributor catalogs as an 8-pin TSSOP device. Confirm each numbered terminal against the selected schematic before layout because the enable and supply connections must be assigned according to the datasheet pin table.
What is the best drop-in replacement for PCA9617ADPJ?
The PCA9617ADPJ requires a replacement with the same 8-pin TSSOP footprint, compatible bidirectional level-translating I2C function, and comparable voltage and frequency ratings. TCA9617A is the closest identified cross-brand candidate because it is a dual-supply Fast-mode Plus I2C repeater discussed as a direct replacement candidate. Confirm pin assignments and operating limits in the candidate manufacturer's datasheet before committing to a PCB change.
Can TCA9617A replace PCA9617ADPJ directly?
TCA9617A is a strong functional replacement candidate for the PCA9617ADPJ because both are dual-supply Fast-mode Plus I2C-bus repeaters. However, direct PCB reuse requires an exact TSSOP-8 ordering option and confirmation that the two devices use identical terminal assignments for the bus, enable, and supply connections. The NXP and Texas Instruments manufacturer datasheets are the controlling documents for that verification.
Is PCA9617ADPJ the same as a standard I2C level shifter?
The PCA9617ADPJ is not merely a passive or MOSFET-based level shifter; it is an active bidirectional repeater with independent low-side and high-side supplies. According to the NXP manufacturer datasheet, it supports 0.8 V to 5.5 V on the low side, 2.2 V to 5.5 V on the high side, and operation up to 1 MHz. Active buffering can improve bus-segment isolation and extend usable topology.
When should I choose PCA9617ADPJ over a non-buffered level shifter?
Choose the PCA9617ADPJ when the two I2C segments require active buffering, different supply voltages, or isolation from another subsystem. Its bidirectional repeater architecture and 1 MHz Fast-mode Plus capability are more suitable than a simple two-transistor shifter when capacitive loading or bus topology makes direct coupling unreliable. For very low-capacitance, same-voltage buses, a simpler interface arrangement may be sufficient.
Where can I buy PCA9617ADPJ and check current lead time?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and order quantity for the PCA9617ADPJ. The form is the appropriate purchasing channel because commercial availability and component allocation can change independently of the device specifications. Provide the exact 8-pin TSSOP ordering code and tape-and-reel handling requirements with the request.
What is the price of PCA9617ADPJ?
Use the Request a Quote form on this page for the current PCA9617ADPJ unit price and applicable quantity breaks. The structured purchasing interface is maintained separately from the technical datasheet so that quotes reflect current inventory, order volume, and supply conditions. No fixed commercial price should be assumed from the datasheet or from an archived listing.
Is PCA9617ADPJ in stock?
Current stock status for the PCA9617ADPJ should be confirmed through the Request a Quote form on this page. The device is an 8-pin TSSOP Fast-mode Plus I2C repeater, but availability can vary by manufacturer lot and packaging form. Include your required quantity and whether tape-and-reel delivery is acceptable when submitting the request.
What is the lead time for PCA9617ADPJ?
Request the current lead time using the Request a Quote form on this page. Lead time depends on factory inventory, allocated production, package format, and the requested quantity, so it should not be inferred from general catalog availability. Supply the exact PCA9617ADPJ MPN, target quantity, delivery location, and required date in the quotation request.
PCA9617ADPJ vs TCA9617A - which is better for a 1 MHz mixed-voltage I2C bus?
Both devices address 1 MHz, dual-supply Fast-mode Plus I2C level translation, so selection depends on exact pin compatibility and verified operating limits. The PCA9617ADPJ is the NXP part in an 8-pin TSSOP package, while TCA9617A is a Texas Instruments alternative family. Compare the NXP and Texas Instruments manufacturer datasheets, especially terminal assignments, enable behavior, supply current, and propagation delay.
What are the key specifications engineers should know about PCA9617ADPJ?
The PCA9617ADPJ combines a 1 MHz maximum bus rate, 0.8 V to 5.5 V low-side range, 2.2 V to 5.5 V high-side range, and bidirectional operation in an 8-pin TSSOP package. The NXP manufacturer datasheet identifies the device as a CMOS level-translating Fm+ I2C-bus repeater for I2C and SMBus systems. These four limits define its primary use in mixed-voltage, 1 MHz bus designs.

엔지니어링 참조 데이터: PCA9617ADPJ — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PCA9617ADPJ when the design needs an active 1 MHz I2C repeater that separates a 0.8 V to 5.5 V low-voltage segment from a 2.2 V to 5.5 V high-voltage segment. It is especially useful when pull-up voltage, bus capacitance, subsystem isolation, or mixed-voltage peripherals make a direct I2C connection impractical. TCA9617A is the closest identified alternative for a dual-supply Fast-mode Plus repeater, but exact TSSOP-8 terminal mapping and operating limits must be checked before PCB reuse. For a same-voltage, short, lightly loaded bus, a simpler interface may avoid the extra device. Confirm the enable reference, pull-up arrangement, maximum bus capacitance, propagation delay, and supply sequencing using the manufacturer datasheets before finalizing the PCB.

대체품과의 비교

파라미터 이 제품 TCA9617A
Package TSSOP-8 TSSOP-8 option required for exact PCB match
Brand NXP Semiconductors Texas Instruments
Product Type Level-translating bidirectional I2C-bus repeater Dual-supply level-translating I2C-bus repeater
Maximum Bus Frequency 1 MHz 1 MHz
Supported Bus I2C and SMBus I2C
Signal Direction Bidirectional Bidirectional

주요 차별점

  • Supports a very low 0.8 V low-side domain (vs TCA9617A)
  • Combines active buffering with level translation (vs TCA9617A)
  • Supports 1 MHz Fast-mode Plus operation (vs TCA9617A)

설계 노트

Connect separate pull-up resistors to each bus segment and reference them to the supply used on that segment. Do not share pull-ups across the PCA9617ADPJ when the two sides operate at different voltages. Keep the SCL and SDA routes on the same side short, symmetrical, and away from switching nodes; the package should sit near the boundary between the two voltage domains so that each short connection remains within its intended supply region.

Change the enable state only while the I2C bus is idle. According to the NXP product information, the enable pin is referenced to VCC(B) and can turn the drivers on or off under system control. Asserting or releasing enable during an active clock or data transfer can create an unintended transition and corrupt the transaction. Define a deterministic startup state and release enable after the relevant supplies and pull-ups are stable.

Treat the PCA9617ADPJ as a partition boundary rather than only a signal-conditioning component. Route the low-voltage and high-side pull-up networks separately, observe current return paths for each supply, and keep the repeater away from high-di/dt switching loops. Because the device supports operation up to 1 MHz, maintain a continuous ground reference and minimize stubs on both SCL and SDA to reduce edge degradation and crosstalk.

Check rise-time behavior at 1 MHz rather than relying only on the nominal clock frequency. The actual bus rate depends on pull-up resistance, total bus capacitance, clock stretching, and the peripheral timing specifications. Use the highest effective capacitance present at the connector or test point when evaluating the design, and ensure the selected values support the required Fast-mode Plus timing across temperature and process variation.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No definitive target-part compliance declarations were identified. AEC-Q100 is not applicable to this general-purpose interface IC.

관련 검색

pca9617adpj datasheet pca9617adpj nxp PCA9617ADPJ datasheet pdf PCA9617ADPJ pinout PCA9617ADPJ 1MHz I2C repeater PCA9617ADPJ TSSOP-8 PCA9617ADPJ level translator PCA9617ADPJ vs TCA9617A PCA9617ADPJ replacement PCA9617ADPJ price PCA9617ADPJ stock PCA9617ADPJ equivalent

관련 부품 & 용어

NXP Semiconductors PCA9617ADPJ PCA9617A TCA9617A Texas Instruments I2C bus SMBus Fast-mode Plus level translator bidirectional repeater signal buffer interface IC CMOS 0.8 V low-side supply 5.5 V high-side supply 1 MHz I2C TSSOP-8 surface-mount package bidirectional bus pull-up resistor VCC(B) enable pin mixed-voltage system bus extension
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기