Texas Instruments

PCF8575PWE4 - 16-Bit I2C/SMBus I/O Expander by TI

부품 번호: PCF8575PWE4 ✓ 활성
2.5 V to 5.5 V Vdss 10 uA maximum Id 24-pin PDSO/TSSOP Package 400 kHz maximum Speed
MOQ: 1 |

PCF8575PWE4 개요

Texas Instruments PCF8575PWE4 is a 16-bit I2C/SMBus remote I/O expander with interrupt output, operating from 2.5 V to 5.5 V and supporting I2C bus speeds up to 400 kHz. The device provides 16 general-purpose quasi-bidirectional I/O lines through two 8-bit ports and is packaged in a 24-pin TSSOP format with a 0.65 mm terminal pitch.

An I/O expander is an interface IC that increases the number of digital input and output lines available to a host microcontroller or other bus controller. The PCF8575 connects through the two-wire I2C or SMBus interface, while its parallel port provides individual control and status signals for attached peripherals. In the product hierarchy, it is an I/O expander, bus interface IC, and semiconductor designed for embedded control and general-purpose remote I/O.

The principal features include 16 individually addressable I/O lines, two parallel ports, a 2.5 V to 5.5 V operating supply range, and an open-drain interrupt output. The I2C interface operates up to 400 kHz, and the device has maximum standby-current consumption of 10 uA. Address selection by hardware pins allows multiple expanders to coexist on one bus without using a large number of host I/O pins.

Communication with the PCF8575 uses serial clock and serial data lines, while power-down, reset, port 0, port 1, and interrupt functions occupy dedicated pins. Quasi-bidirectional ports can source output current, accept logic inputs, and participate in partial high-impedance operation. The open-drain interrupt output provides a common hardware indication that one or more port inputs have changed, allowing the host to service the device without continuously polling every line.

Typical uses include industrial control panels, sensor and actuator interfaces, programmable instrument front panels, embedded data-acquisition systems, and compact control boards that need more digital lines than the host controller provides. The 2.5 V minimum supply supports low-voltage embedded systems, while the 5.5 V maximum allows operation from a conventional 5 V rail. The 24-pin TSSOP package also fits densely populated PCB layouts with 0.65 mm lead spacing.

Design the bus pull-up network for the selected SCL and SCL frequency and system capacitance, and account for the voltage drop contributed by pull-up resistance when more than one expander drives the bus low. Confirm that every connected node is 5 V tolerant before using the 5.5 V maximum supply. Preserve the interrupt output's open-drain behavior and provide suitable pull-up or signal-conditioning arrangements where required.

This page organizes the key electrical characteristics, complete package information, direct replacement options, and practical bus-layout guidance for engineers evaluating the PCF8575PWE4. It also provides focused comparisons for determining whether an alternative offers a meaningful functional or lifecycle advantage without requiring a PCB footprint change.

드롭인 대체품: PCF8575PWE4 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PCF8575PWE4 (동일 폼 팩터 및 풋프린트) — 차이점: Maximum Standby Current.

Texas Instruments
Maximum Standby Current: 10 µA
비교 대상: PCF8575PWE4 →

PCF8575PWRE4

✅ 드롭인
📦 TSSOP-24
Same 16-bit I2C/SMBus expander function and 24-pin PW-family package; orderable temperature and packing suffixes must be checked before substitution

📋 참조 대체품 (카탈로그에 없음)

TCA6416PWTG4

✅ 드롭인
📦 TSSOP-24
Same 16-bit I2C remote I/O concept and 24-pin PW-family package, but supply range and port behavior differ and require pin-level validation

📋 참조 대체품 (카탈로그에 없음)

PCF8575PWE4 사양

Number of I/O Lines 16 lines
Port Configuration 2 ports of 8 I/O lines
동작 공급 전압 2.5 V to 5.5 V
Nominal Supply Voltage 3.3 V
I2C Bus Frequency 400 kHz maximum
Supported Serial Interfaces I2C and SMBus
Interrupt Output Open-drain
Maximum Standby Current 10 uA maximum
Port Output Characteristics Quasi-bidirectional CMOS I/O
Address Configuration Hardware-selectable bus address
Terminal Pitch 0.65 mm
Package Description 24-pin PDSO/TSSOP
실장 유형 Surface mount
Device Category Remote 16-bit parallel I/O expander

PCF8575PWE4 24-pin pdso/tssop 핀 구성 가이드

PCF8575PWE4(24-pin pdso/tssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.

PCF8575PWE4의 24-pin pdso/tssop 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCF8575PWE4.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCF8575PWE4 적합 용도: 6 애플리케이션s: Industrial Control Panel Interface, Sensor and Actuator Hub, Programmable Instrument Front Panel, Data Acquisition Front End, LED and Discrete Control Module, Embedded Communication Interface Hub.

🏭

Industrial Control Panel Interface

The PCF8575PWE4 fits industrial control panels where a host controller needs more panel I/O than its native pin count allows. Its 16 quasi-bidirectional lines can drive status indicators and read discrete inputs, while the 2.5 V to 5.5 V operating range supports both 3.3 V and 5 V control logic. The open-drain interrupt output allows the controller to respond to a changed input without continuously polling all 16 lines. The 24-pin TSSOP package with 0.65 mm pitch preserves board area in compact panels. Designers should verify relay-driver interfaces, input debouncing, and the exact operating-temperature grade for the deployed enclosure.

🧩

Sensor and Actuator Hub

The PCF8575PWE4 can act as a remote sensor and actuator hub when the primary controller has too few direct GPIO pins for discrete devices. Sixteen independently controlled lines support digital sensors, relay-control stages, and status feedback through the two 8-bit ports. Operation from 2.5 V to 5.5 V accommodates common embedded logic levels, and the 400 kHz I2C capability allows updates to occur quickly enough for many control loops. The interrupt function signals an input transition, helping the host avoid constant register reads. Engineering checks should include output-load current, input thresholds, external pull-ups, isolation requirements, and protection against connector-borne transients.

🖥️

Programmable Instrument Front Panel

The PCF8575PWE4 is useful in programmable laboratory instruments where front-panel switches, indicators, and mode controls would otherwise consume most host GPIO resources. The two 8-bit ports provide 16 local lines, and the 400 kHz I2C link supports responsive panel updates from a host processor. Its 24-pin TSSOP footprint helps maintain dense instrument layouts, while the 10 uA maximum standby current supports low-power operating states. The interrupt output can indicate a changed front-panel control before the host performs a complete status read. Designers should use suitable logic buffering for long switch wiring and account for LED current, switch bounce, and exposed-panel ESD protection in the final circuit.

📺

Data Acquisition Front End

The PCF8575PWE4 can extend a data-acquisition system by collecting digital channel status, controlling range or mode enables, and reading external instrumentation flags. Its 16 lines and interrupt output reduce the number of host connections required for remote control and status. The 2.5 V minimum supply supports 3.3 V acquisition controllers, while 400 kHz I2C operation supports reasonably rapid configuration updates. The compact 24-pin TSSOP package leaves routing space for analog and mixed-signal circuitry. Signal-integrity review should account for bus capacitance, pull-up sizing, separation from high-switching analog nodes, and any external isolation between field-wired inputs and the logic ground.

💡

LED and Discrete Control Module

The PCF8575PWE4 is appropriate for a remote LED and discrete-control module because its 16 quasi-bidirectional lines can operate indicator LEDs or drive external transistor stages while returning device status. The I2C interface keeps the host wiring compact, and the open-drain interrupt output can report a changed status input without continuous polling. Its 2.5 V to 5.5 V range permits integration with 3.3 V systems, and the 24-pin TSSOP package supports compact LED-control boards. Designers must respect each port's current limits, account for LED forward current and resistor tolerances, and use suitable drivers when a load exceeds the direct output capability. Common-anode or common-cathode LED arrangements should be checked against the selected drive method.

🌐

Embedded Communication Interface Hub

The PCF8575PWE4 can serve as an I/O companion to a communications-oriented controller that needs additional discrete lines for modem control, link status, configuration, or peripheral enables. The 16-bit port capacity consolidates these controls over I2C, while the interrupt output provides an event-driven indication of remote state changes. The device supports 2.5 V to 5.5 V operation and a 400 kHz bus, matching many embedded communication designs. In a network or router-adjacent assembly, the package should be placed away from switching supplies and high-energy lines. Designers should validate signal levels, bus loading, pull-up values, and grounding or isolation requirements for externally accessible communication interfaces.

What is the operating voltage of PCF8575PWE4?
The PCF8575PWE4 operates from 2.5 V to 5.5 V, allowing it to interface with both low-voltage embedded systems and conventional 5 V logic. According to the Texas Instruments PCF8575 product page and datasheet, the device supports I2C and SMBus communication at up to 400 kHz. Its 3.3 V nominal operating point makes it particularly suitable for 3.3 V control systems, although the host controller, pull-ups, and attached peripherals must use compatible signal levels.
How many I/O lines does PCF8575PWE4 provide?
The PCF8575PWE4 provides 16 general-purpose I/O lines divided into two 8-bit parallel ports. According to the Texas Instruments PCF8575 datasheet, these are quasi-bidirectional CMOS lines that can be configured individually as inputs or outputs through the serial interface. The device adds 16 remote lines to a host microcontroller while requiring only I2C clock and data connections, plus address-selection connections where multiple expanders share a bus.
Where can I download the PCF8575PWE4 datasheet PDF?
The official PCF8575PWE4 technical information is available from the Texas Instruments PCF8575 product page, which provides the manufacturer datasheet and ordering information. According to Texas Instruments, the device is a 16-bit, 2.5 V to 5.5 V I2C/SMBus I/O expander with interrupt output. Use the manufacturer copy for the complete pin description, timing characteristics, electrical limits, and application guidance before assigning PCB functions or calculating bus margins.
What is the PCF8575PWE4 package and pin pitch?
The PCF8575PWE4 uses a 24-pin surface-mount PDSO/TSSOP-style package with a 0.65 mm terminal pitch. The exact lead layout and exposed functions must be taken from the Texas Instruments datasheet rather than inferred from the suffix alone. The package drawing places the device in a 24-pin TSSOP footprint, so the PCB land pattern should be checked against the manufacturer dimensions before layout release.
Does PCF8575PWE4 support SMBus and 400 kHz I2C?
Yes, the PCF8575PWE4 supports both I2C and SMBus communication, with an I2C bus frequency of up to 400 kHz. According to the Texas Instruments PCF8575 product page, it is designed as a remote 16-bit I/O expander for microcontrollers and other embedded controllers. The 400 kHz rate is the maximum supported operating frequency; actual bus timing still depends on wiring length, capacitance, pull-up resistance, and the slowest device on the bus.
What is the PCF8575PWE4 interrupt output used for?
The open-drain interrupt output lets the host controller react to a change on one of the 16 port inputs without continuously polling the expander. According to the Texas Instruments PCF8575 datasheet, the interrupt is associated with the input-port change-detection function. Because the output is open-drain, it can support a wired-AND arrangement when several devices share one interrupt line, and it requires an appropriate pull-up when used as an ordinary active-low signal.
How much standby current does PCF8575PWE4 consume?
The PCF8575PWE4 has a maximum standby-current consumption of 10 uA. According to the Texas Instruments PCF8575 datasheet, low standby-current operation is useful in battery-powered embedded equipment where the host spends substantial time idle. The value is a maximum standby specification, so system power budgeting should use it as an upper bound and separately evaluate active operating current under the intended bus and port loading conditions.
PCF8575PWE4 vs PCF8575PWG4 - which is better?
PCF8575PWE4 is the preferred choice when the PCB requires the PWE4 ordering variant, while PCF8575PWG4 may suit a different package or qualification arrangement. According to Texas Instruments product information for the PCF8575 family, both devices implement the same 16-bit, 2.5 V to 5.5 V I2C/SMBus remote I/O expander function with interrupt output. Before substituting, compare the orderable package, temperature range, pin names, lifecycle status, and exact footprint in the manufacturer ordering information.
PCF8575PWE4 vs TCA6416PWTG4 - which is better for remote I/O?
Choose PCF8575PWE4 when the design specifically requires the established PCF8575 interface and its 16-bit quasi-bidirectional I/O behavior. The TCA6416PWTG4 is a different 16-bit I2C I/O expander whose power range and port implementation should be checked independently. According to the Texas Instruments PCF8575 product information, PCF8575 supports 2.5 V to 5.5 V and 400 kHz I2C; compare those limits with the TCA6416 requirements before treating it as a direct replacement.
When should I choose PCF8575PWE4 over PCF8575PWRE4?
Choose PCF8575PWE4 when it is the exact orderable device specified by the product's temperature, qualification, and package requirements. PCF8575PWRE4 represents another orderable member of the PCF8575 family and can be relevant where its ordering code and environmental rating are preferable. According to the Texas Instruments family documentation, both devices provide a 16-bit remote I/O expander with interrupt, but package, temperature range, and qualification details must be compared before substitution.
Is PCF8575PWE4 suitable for industrial control and sensor interfaces?
The PCF8575PWE4 is suitable for general-purpose embedded control when its 16 I/O lines, 2.5 V to 5.5 V supply range, and 400 kHz I2C interface meet the system requirements. The Texas Instruments product page identifies it as a remote I/O expander with an interrupt output. For industrial equipment, also verify the exact operating-temperature grade and required environmental qualifications, then confirm that attached sensors, relays, and optocouplers present acceptable logic levels and load currents.
What can replace PCF8575PWE4?
The closest replacement is the orderable PCF8575 family member that uses the same footprint, pin functions, voltage range, bus behavior, and environmental grade. PCF8575PWRE4 is one documented family alternative, but its order code and environmental details must be checked before use. According to Texas Instruments, the family provides 16 I/O lines, 2.5 V to 5.5 V operation, 400 kHz I2C, and an interrupt output; functional similarity alone does not establish drop-in compatibility.
Is PCF8575PWE4 the same as TCA6416PWTG4?
No, the PCF8575PWE4 and TCA6416PWTG4 are related remote I/O expanders but are not automatically interchangeable. The Texas Instruments PCF8575 is specified for 2.5 V to 5.5 V operation, 16 I/O lines, and a 400 kHz I2C interface. Although the TCA6416 also offers 16-bit I2C I/O expansion, verify its pinout, supply range, port characteristics, interrupt polarity, address behavior, and package dimensions before treating it as a drop-in replacement.
What are the key specifications of PCF8575PWE4 that engineers should know?
The PCF8575PWE4 is a 16-bit remote I/O expander with two 8-bit ports, 2.5 V to 5.5 V operation, I2C/SMBus support, and an open-drain interrupt output. According to the Texas Instruments product page and datasheet, it supports bus speeds up to 400 kHz, has maximum standby current of 10 uA, and uses a 24-pin surface-mount package with 0.65 mm pitch. These characteristics make it suitable for adding compact remote digital I/O to an embedded controller.
Where to buy PCF8575PWE4 and what is the current lead time?
Use the Request a Quote form on this page to request current PCF8575PWE4 availability, pricing, and lead time for the exact orderable part. The manufacturer identifies PCF8575 as a 16-bit, 2.5 V to 5.5 V I2C/SMBus I/O expander with interrupt output, but live commercial conditions can change by quantity and schedule. Provide the required quantity, target delivery date, and packaging preference when requesting the quotation.

엔지니어링 참조 데이터: PCF8575PWE4 — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PCF8575PWE4 for a 16-bit remote I/O design that operates from 2.5 V to 5.5 V, uses I2C or SMBus at up to 400 kHz, and needs an open-drain interrupt output in a 24-pin TSSOP footprint. Choose PCF8575PWRE4 when it is the orderable family variant that matches your required temperature, qualification, and packing configuration while retaining the same core 16-bit expander function. Choose TCA6416PWTG4 when its port architecture, supply range, interrupt behavior, and device addressing offer a better fit, but validate every pin and operating limit before treating it as a drop-in replacement. For battery-powered systems, prioritize the 10 uA maximum standby specification and confirm the actual operating mode of the host. For industrial or automotive environments, verify the exact ordering code's temperature and qualification requirements rather than assuming that every PCF8575 variant has the same grade.

대체품과의 비교

파라미터 이 제품 PCF8575PWRE4 TCA6416PWTG4
Package TSSOP-24 TSSOP-24 TSSOP-24
Brand Texas Instruments Texas Instruments Texas Instruments
I/O Lines 16 lines 16 lines 16 lines
Serial Interface Support I2C and SMBus I2C and SMBus I2C

주요 차별점

  • Provides 16 remote I/O lines through two 8-bit ports (vs TCA6416PWTG4)
  • Supports a broad 2.5 V to 5.5 V operating range (vs TCA6416PWTG4)
  • Low 10 uA maximum standby current (vs PCF8575PWRE4)

설계 노트

Use the manufacturer land pattern for the 24-pin PW-family package and verify the 0.65 mm lead pitch against the PCB library. Place the device near the connector or controlled peripheral group, but keep the I2C route away from switching nodes and long parallel spans that can increase capacitive loading. Provide unobstructed access to address-selection, power-down, reset, and interrupt pins. Confirm the pin-direction table in the manufacturer datasheet before connecting circuitry because the port behavior differs between input, output-high, and quasi-bidirectional states.

Size the SDA and SCL pull-ups from bus voltage, total capacitance, rise-time requirements, and the number of attached devices rather than using an arbitrary resistance. The PCF8575 supports I2C operation up to 400 kHz, but long wiring or excessive capacitance can prevent compliant rise times even when the nominal clock rate is acceptable. Check the pull-up current at each logic-low state, account for the parallel contribution of all connected devices, and avoid large pull-up values that make the bus too slow for the selected operating frequency.

Do not treat the quasi-bidirectional ports as unrestricted push-pull outputs. Each port may be driven high by the expander for only a limited period before an external pull-up must sustain the high state. Review the data-sheet timing limits before using an output to drive a continuously energized load, and use a transistor or driver stage where required. Also observe power-down and reset behavior, ensure all connected nodes remain within the device's voltage limits, and confirm the polarity and pull-up arrangement of the open-drain interrupt line.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not explicitly state the requested environmental or material-compliance statuses. These fields remain unknown until confirmed against the manufacturer's compliance documentation for the exact orderable part.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PCF8575PWE4 datasheet PCF8575PWE4 pinout PCF8575PWE4 datasheet pdf PCF8575PWE4 equivalent PCF8575PWE4 replacement PCF8575PWE4 vs PCF8575PWRE4 PCF8575PWE4 vs TCA6416PWTG4 PCF8575PWE4 TSSOP-24 footprint PCF8575PWE4 16-bit I2C expander Texas Instruments PCF8575PWE4 PCF8575PWE4 price PCF8575PWE4 stock PCF8575PWE4 industrial control interface PCF8575PWE4 open drain interrupt PCF8575PWE4 400 kHz I2C

관련 부품 & 용어

Texas Instruments PCF8575PWE4 PCF8575PWRE4 TCA6416PWTG4 I/O expander remote I/O expander parallel I/O port interface IC semiconductor I2C SMBus two-wire bus open-drain interrupt output quasi-bidirectional CMOS I/O 16-bit I/O two 8-bit ports 400 kHz I2C 2.5 V to 5.5 V 10 uA standby current TSSOP-24 TSSOP package family surface-mount technology 0.65 mm lead pitch embedded control industrial control panel
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기