Texas Instruments

PCM1718E/2K - 18-Bit Stereo Audio DAC | Texas Instruments

부품 번호: PCM1718E/2K ✓ 활성
20-SSOP (DB), 5.30 mm width Package
MOQ: 1 |

PCM1718E/2K 개요

The Texas Instruments PCM1718E/2K is an 18-bit, two-channel delta-sigma audio digital-to-analog converter with 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N performance. It accepts I2S digital audio at up to 48 kHz and is packaged in a 20-pin SSOP (DB) surface-mount package.

An audio DAC is a data converter that transforms digital audio samples into left- and right-channel analog voltage signals. The PCM1718 family integrates an 8-times oversampling digital filter, a multilevel delta-sigma DAC, an analog low-pass filter, and an output amplifier. This integrated signal chain supports audio equipment requiring separate stereo analog outputs without relying on discrete output stages.

The PCM1718E/2K accepts normal 18-bit input data and supports stereo operation at 48 kHz. Its headline performance includes 100 dB signal-to-noise ratio, 96 dB dynamic range, and -90 dB total harmonic distortion plus noise. The integrated filtering and output-amplifier functions reduce the number of external analog components required in a conventional audio-output design.

Technically, the device uses delta-sigma conversion with 8-times oversampling to push quantization noise away from the audio passband. A subsequent analog low-pass filter reconstructs a continuous analog waveform from the oversampled converter output, while the integrated output amplifier provides the final buffered analog drive stage. The result is a compact converter solution intended for high-fidelity stereo audio signal paths.

Typical uses include CD-player and digital-audio decoding boards, multimedia equipment, home-theater audio modules, active speaker electronics, and other consumer or industrial products that require I2S-to-analog conversion. It is particularly appropriate when a design needs 18-bit and 48 kHz operation with integrated stereo DAC and output-amplifier functions.

The principal design consideration is the analog output implementation. Follow the manufacturer’s application circuit for output-mode selection, analog biasing, and output filtering, and preserve a quiet ground and supply reference around the converter. The 20-pin SSOP package also requires a PCB footprint and layout that match the manufacturer’s DB-package drawing.

This page combines the PCM1718E/2K ordering information, verified performance characteristics, package details, drop-in alternatives, and practical selection guidance. It is intended to help engineers identify whether the device fits an I2S stereo-audio design before beginning schematic and layout work.

드롭인 대체품: PCM1718E/2K — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: PCM1718E/2K (동일 폼 팩터 및 풋프린트) — 차이점: Package.

Texas Instruments
Package: 20-pin SSOP

PCM1718E

✅ 드롭인
Texas Instruments
📦 20-SSOP (DB)
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · I2S · Stereo · 100 dB · 96 dB · -90 dB

가격 문의

데이터시트 보기 →

PCM1718E/2K 최대 정격 & 전기적 특성

Product Type Stereo audio digital-to-analog converter
Converter Architecture Multilevel delta-sigma DAC
Channel Count 2 channels
분해능 18 bits
Maximum Sampling Rate 48 kHz
Digital Audio Interface I2S
Input Data Format Normal 18-bit input data
Signal-to-Noise Ratio 100 dB
Dynamic Range 96 dB
THD+N -90 dB
Digital Filter Oversampling 8 times
Integrated Functions Digital filter, delta-sigma DAC, analog low-pass filter, and output amplifier
패키지 20-SSOP (DB), 5.30 mm width
핀 수 20 pins
실장 유형 Surface mount

PCM1718E/2K 20-ssop (db), 5.30 mm width 핀 구성 가이드

PCM1718E/2K(20-ssop (db), 5.30 mm width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PCM1718E/2K의 20-ssop (db), 5.30 mm width 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCM1718E/2K.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCM1718E/2K 적합 용도: 6 애플리케이션s: CD and Digital-Audio Output, Home-Theater Audio Module, Active Speaker Interface, Multimedia Audio Adapter, Industrial Audio Control Panel, Portable Consumer Audio Device.

🎧

CD and Digital-Audio Output

The PCM1718E/2K fits a CD-player or digital-audio decoding module that receives 18-bit I2S samples at up to 48 kHz and requires left- and right-channel analog outputs. Its 8-times oversampling digital filter, multilevel delta-sigma DAC, analog low-pass filter, and integrated output amplifier provide a complete conversion path in one 20-SSOP device. The specified 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N establish the key performance envelope for the audio path. Use the manufacturer application circuit to select the output mode, connect the digital interface, and place bypass components; the main design benefit is fewer discrete analog stages than a basic converter-only implementation.

🎬

Home-Theater Audio Module

The PCM1718E/2K is suitable for a home-theater or multimedia board that accepts an I2S audio stream and produces stereo analog signals for amplifiers and active speakers. Its 18-bit conversion capability, 48 kHz maximum sampling rate, and -90 dB THD+N target support conventional lossless-audio playback paths, while 100 dB SNR provides headroom above the program material’s noise floor. Because the converter includes analog filtering and an output amplifier, the design can be organized around a compact digital-to-analog section. Follow the Texas Instruments reference connection for output loading, supply bypassing, and analog grounding to preserve the stated noise and distortion performance.

🔊

Active Speaker Interface

The PCM1718E/2K can serve as the stereo digital-to-analog stage in an active-speaker controller receiving I2S audio at 48 kHz. Its two-channel architecture eliminates the need to instantiate separate converters for left and right channels, and the integrated delta-sigma DAC, analog low-pass filter, and output amplifier shorten the analog output path. The 20-SSOP surface-mount package also supports compact multi-board speaker electronics. The design must still verify the selected output configuration against the intended speaker-interface load and preserve a low-noise analog reference; the converter’s 100 dB SNR is useful where the downstream amplifier and speaker system require a clean source signal.

🖥️

Multimedia Audio Adapter

The PCM1718E/2K fits a compact multimedia adapter that converts an I2S source into analog audio for headphones, powered speakers, or another analog input. Supporting normal 18-bit data at up to 48 kHz addresses common digital-audio transport rates, while the integrated output-amplifier section reduces the component count of the output stage. The converter’s -90 dB THD+N and 96 dB dynamic range provide useful limits when evaluating the complete audio chain. Place the device according to the Texas Instruments DB-package drawing, keep the analog path compact, and use the recommended decoupling arrangement to minimize switching or digital coupling into the left- and right-channel outputs.

🏭

Industrial Audio Control Panel

The PCM1718E/2K is applicable to an industrial audio panel or embedded control interface that receives digital playback audio and presents a stereo analog output. Its two-channel 18-bit architecture is appropriate for status prompts, machine interfaces, and local audio monitoring where independent left and right outputs are useful. The 48 kHz sampling limit matches the PCM1718 operating envelope, and the integrated filtering and output amplification simplify implementation compared with a discrete converter chain. Designers should assess the analog ground strategy carefully because industrial systems can combine digital switching and audio circuitry on the same board. The manufacturer’s recommended decoupling, output configuration, and layout should be preserved rather than treating the converter as an unrestricted line-output component.

📱

Portable Consumer Audio Device

The PCM1718E/2K can be integrated into a portable consumer-audio product that accepts I2S playback data and requires compact stereo analog conversion. Its 20-SSOP surface-mount package, two-channel output, and integrated digital filter, delta-sigma DAC, analog low-pass filter, and output amplifier reduce board-space requirements. The specified 100 dB SNR and -90 dB THD+N support high-quality signal generation for portable speakers or headphone amplification stages. The design must follow the manufacturer’s package drawing and analog-output configuration, with particular care placed on supply layout and ground isolation because battery-powered systems may contain fast-switching regulators and display circuitry near the audio converter.

추천 제품 요약

PCM1718E Texas Instruments 사용처: CD and Digital-Audio Output, Home-Theater Audio Module, Active Speaker Interface, Multimedia Audio Adapter, Industrial Audio Control Panel, Portable Consumer Audio Device PCM1794ADBR Texas Instruments stereo audio DAC comparison option 사용처: CD and Digital-Audio Output, Home-Theater Audio Module, Active Speaker Interface, Multimedia Audio Adapter, Industrial Audio Control Panel, Portable Consumer Audio Device
What is the PCM1718E/2K?
The PCM1718E/2K is a Texas Instruments stereo audio DAC that converts 18-bit I2S digital audio into two analog output channels. It operates at up to 48 kHz and combines an 8-times oversampling digital filter, multilevel delta-sigma DAC, analog low-pass filter, and output amplifier in a 20-SSOP package. According to the Texas Instruments PCM1718 datasheet, the device provides 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N.
What are the key specifications of PCM1718E/2K?
The PCM1718E/2K is an 18-bit, two-channel I2S DAC rated for audio sampling rates up to 48 kHz. Key characteristics include 100 dB SNR, 96 dB dynamic range, -90 dB THD+N, 8-times digital-filter oversampling, and integrated analog output amplification. The Texas Instruments datasheet identifies the package as 20-pin SSOP (DB), providing a compact surface-mount option for stereo audio-output designs.
Where can I download the PCM1718E/2K datasheet PDF?
The official PCM1718E/2K documentation is available from the Texas Instruments PCM1718 product page at https://www.ti.com/product/PCM1718. The manufacturer datasheet contains the complete electrical characteristics, pin descriptions, application circuit, and DB-package drawings needed to design the converter. Use the ordering-information section to confirm that PCM1718E/2K corresponds to the required 20-SSOP package and shipping form.
Where can I find the PCM1718E/2K pinout?
The PCM1718E/2K pinout is published in the Texas Instruments PCM1718 datasheet, together with the 20-pin DB-package drawing. Assign PCB nets directly from the manufacturer’s pin-description table rather than relying on a generic SSOP layout. The device uses a 20-pin SSOP package, and the datasheet is the controlling source for signal names, analog-output configuration, digital interface connections, and supply pins.
Is the PCM1718E/2K suitable for I2S stereo audio?
Yes, the PCM1718E/2K is designed for stereo I2S digital audio and accepts normal 18-bit input data at sampling rates up to 48 kHz. It is suitable for CD-player, multimedia, home-theater, and active-speaker output paths where two analog channels are required. The integrated 8-times oversampling filter, delta-sigma DAC, analog low-pass filter, and output amplifier form a complete stereo conversion chain.
What can replace the PCM1718E/2K?
PCM1718E is the closest documented drop-in option identified for PCM1718E/2K because it retains the 18-bit stereo DAC architecture and 20-SSOP package while omitting the /2K ordering suffix. The suffix identifies the supplier’s shipping form, so confirm that the alternate ordering code and reel quantity meet production requirements. Verify pin assignments, supply levels, analog-output configuration, and layout against the Texas Instruments datasheet before substitution.
Is PCM1718E the same as PCM1718E/2K?
PCM1718E and PCM1718E/2K represent the same Texas Instruments PCM1718 device family with different ordering suffixes. PCM1718E/2K is supplied in the designated /2K form, while PCM1718E is the base ordering code. Both use the 20-pin SSOP architecture, but engineers should confirm package orientation, reel quantity, and lifecycle status for the exact production order code.
What is the best Texas Instruments equivalent for PCM1718E/2K?
PCM1718E is the best documented same-family alternative because it retains the PCM1718 converter design and 20-SSOP package while using a different ordering suffix. Its functional alignment is exact, but the /2K shipping form must be checked against assembly requirements. No distinct cross-brand drop-in replacement was established from the available manufacturer and cross-reference information, so board-level substitutions should not be assumed.
PCM1718E/2K vs PCM1718E - which is the better replacement?
PCM1718E is the stronger direct replacement candidate because it preserves the PCM1718 family, 20-SSOP package, and 18-bit stereo DAC function. The practical distinction is the ordering suffix rather than the core converter specification. Choose PCM1718E when its reel quantity, package orientation, and availability meet production needs; otherwise retain PCM1718E/2K to avoid unnecessary logistics and component-handling changes.
When should I choose PCM1718E/2K instead of PCM1718E?
Choose PCM1718E/2K when its specified /2K shipping form matches the required assembly process, reel quantity, and component-handling plan. Choose PCM1718E when that base ordering code is more convenient to source or assemble. Both belong to the same PCM1718 family and use the 20-SSOP package, so the choice should be driven by confirmed order-code logistics rather than expected changes in converter performance.
How much power and ground layout care does PCM1718E/2K need?
The PCM1718E/2K should be laid out with short analog traces, a quiet analog ground reference, and supply decoupling placed close to the relevant device pins. Follow the Texas Instruments application circuit for the approved capacitor values and output configuration. The converter’s integrated analog stages can reduce external components, but incorrect grounding or long shared return paths can degrade the specified 100 dB SNR and -90 dB THD+N performance.
Does PCM1718E/2K need an external output amplifier?
The PCM1718E/2K includes an output amplifier as part of its integrated stereo DAC signal chain. This can reduce the need for discrete output-buffer circuitry when the selected analog-output mode and load meet the application requirements. The Texas Instruments datasheet still governs the output-mode settings, load conditions, bypass components, and analog connections, so designers should not omit or alter those elements without checking the specified electrical characteristics.
Where can I buy PCM1718E/2K and check current availability?
Use the “Request a Quote” form on this page to request the current quantity, stock position, lead time, and order confirmation for PCM1718E/2K. The Texas Instruments product page and authorized channel listings can also confirm the manufacturer ordering code, but request the latest commercial commitment before scheduling production. Availability and delivery timing can change, so they should be confirmed for the exact MPN and package form.
What is the price of PCM1718E/2K?
The current unit price for PCM1718E/2K should be obtained through the “Request a Quote” form on this page. The form can return the applicable quantity breaks, order minimum, stock position, and delivery schedule for the exact MPN. Because commercial terms and component availability can change, engineers should use the quote response rather than a historical or approximate unit figure for budgeting and production release.
Is PCM1718E/2K in stock and what is its lead time?
Current stock and lead time for PCM1718E/2K should be confirmed through the “Request a Quote” form on this page. Enter the required quantity, production reel quantity, and destination country so the quote reflects the appropriate order form and logistics. Distributor availability can differ by package suffix and order volume, making a current quotation the most reliable basis for a build schedule.
Is PCM1718E/2K RoHS compliant?
The RoHS compliance status for the exact PCM1718E/2K ordering code should be confirmed in the Texas Instruments product documentation or a current manufacturer material-declaration record. The available product information identifies the device as a 20-SSOP stereo DAC but does not state its RoHS, REACH, AEC-Q100, lead-free, or halogen-free status. Use the manufacturer declaration for production environmental-compliance requirements rather than inferring status from the product family.

엔지니어링 참조 데이터: PCM1718E/2K — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PCM1718E/2K for a compact stereo audio design requiring I2S input, 18-bit conversion at up to 48 kHz, and a 20-SSOP footprint. It is particularly attractive when 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N are important and when the integrated digital filter, delta-sigma DAC, analog low-pass filter, and output amplifier can simplify the analog output section. PCM1718E is the closest documented alternative because it retains the same converter family, package, and performance ratings; select it when its ordering suffix and assembly logistics are preferable. No separate cross-brand drop-in part was established from the available cross-reference information. Before substitution, verify pin assignments, output configuration, component values, and the manufacturer package drawing against the Texas Instruments datasheet.

대체품과의 비교

파라미터 이 제품 PCM1718E
Brand Texas Instruments Texas Instruments
Package 20-SSOP (DB) 20-SSOP (DB)
Product Type Stereo audio DAC Stereo audio DAC
Resolution 18 bits 18 bits
Channel Count 2 channels 2 channels
Maximum Sampling Rate 48 kHz 48 kHz
Digital Interface I2S I2S
Signal-to-Noise Ratio 100 dB 100 dB
Dynamic Range 96 dB 96 dB
THD+N -90 dB -90 dB
Digital Filter Oversampling 8 times 8 times
Pin Count 20 pins 20 pins

주요 차별점

  • Complete integrated stereo conversion chain (vs PCM1718E)
  • High-definition stereo performance in a compact package (vs PCM1718E)
  • Single-package left- and right-channel conversion (vs PCM1718E)

설계 노트

Use the Texas Instruments DB-package land pattern and pin-1 orientation shown in the PCM1718 datasheet. The PCM1718E/2K is a 20-SSOP device, so a generic 20-pin footprint should not be assumed without checking lead pitch, body width, and polarity. Keep digital-interface routing away from the left- and right-channel analog outputs, and place the required bypass capacitors close to their associated supply pins.

Route the analog output paths as short and symmetric as practical between the converter pins, external components, and downstream audio input. Maintain a continuous analog-ground reference and avoid sharing narrow return paths between the DAC outputs and noisy digital or switching circuitry. The stated 100 dB SNR and -90 dB THD+N figures depend on a clean implementation, so follow the manufacturer’s typical application circuit when selecting component values and grounding boundaries.

Do not select the analog output mode or external filtering network solely from generic SSOP examples. PCM1718E/2K applications depend on the pin descriptions, output configuration, and loading conditions in the Texas Instruments datasheet. Also distinguish PCM1718E/2K from PCM1718E by the ordering suffix and confirm reel quantity and shipping form before committing an exact part number to a production BOM.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The available product information does not state the exact compliance status for PCM1718E/2K. Obtain current environmental and material declarations from Texas Instruments before making a production compliance determination.

데이터 검증일: 2026-11-15 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PCM1718E/2K datasheet PCM1718E/2K pinout PCM1718E/2K datasheet pdf PCM1718E/2K equivalent PCM1718E/2K replacement PCM1718E/2K cross reference PCM1718E/2K footprint PCM1718E/2K price PCM1718E/2K stock Texas Instruments PCM1718E/2K PCM1718E vs PCM1718E/2K PCM1718 20-SSOP pinout PCM1718 I2S application circuit PCM1718E/2K audio DAC

관련 부품 & 용어

Texas Instruments PCM1718E/2K PCM1718E PCM1794ADBR SoundPlus stereo audio DAC digital-to-analog converter delta-sigma converter I2S interface 18-bit resolution 48 kHz sampling rate 100 dB SNR 96 dB dynamic range -90 dB THD+N 8-times oversampling analog low-pass filter output amplifier 20-SSOP DB package surface mount stereo audio PCM1718 RoHS REACH
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기