PCM1718E/2K - 18-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1718E/2K ✓ Hoạt độngPCM1718E/2K Tóm tắt
An audio DAC is a data converter that transforms digital audio samples into left- and right-channel analog voltage signals. The PCM1718 family integrates an 8-times oversampling digital filter, a multilevel delta-sigma DAC, an analog low-pass filter, and an output amplifier. This integrated signal chain supports audio equipment requiring separate stereo analog outputs without relying on discrete output stages.
The PCM1718E/2K accepts normal 18-bit input data and supports stereo operation at 48 kHz. Its headline performance includes 100 dB signal-to-noise ratio, 96 dB dynamic range, and -90 dB total harmonic distortion plus noise. The integrated filtering and output-amplifier functions reduce the number of external analog components required in a conventional audio-output design.
Technically, the device uses delta-sigma conversion with 8-times oversampling to push quantization noise away from the audio passband. A subsequent analog low-pass filter reconstructs a continuous analog waveform from the oversampled converter output, while the integrated output amplifier provides the final buffered analog drive stage. The result is a compact converter solution intended for high-fidelity stereo audio signal paths.
Typical uses include CD-player and digital-audio decoding boards, multimedia equipment, home-theater audio modules, active speaker electronics, and other consumer or industrial products that require I2S-to-analog conversion. It is particularly appropriate when a design needs 18-bit and 48 kHz operation with integrated stereo DAC and output-amplifier functions.
The principal design consideration is the analog output implementation. Follow the manufacturer’s application circuit for output-mode selection, analog biasing, and output filtering, and preserve a quiet ground and supply reference around the converter. The 20-pin SSOP package also requires a PCB footprint and layout that match the manufacturer’s DB-package drawing.
This page combines the PCM1718E/2K ordering information, verified performance characteristics, package details, drop-in alternatives, and practical selection guidance. It is intended to help engineers identify whether the device fits an I2S stereo-audio design before beginning schematic and layout work.
Bộ thay thế dễ dàng lắp đặt cho PCM1718E/2K — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1718E/2K (cùng hình factor và footprint) — khác nhau ở Package.
PCM1718E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1718E/2K Tỷ lệ tối đa & tính chất điện
| Product Type | Stereo audio digital-to-analog converter |
| Converter Architecture | Multilevel delta-sigma DAC |
| Channel Count | 2 channels |
| Độ phân giải | 18 bits |
| Maximum Sampling Rate | 48 kHz |
| Digital Audio Interface | I2S |
| Input Data Format | Normal 18-bit input data |
| Signal-to-Noise Ratio | 100 dB |
| Dynamic Range | 96 dB |
| THD+N | -90 dB |
| Digital Filter Oversampling | 8 times |
| Integrated Functions | Digital filter, delta-sigma DAC, analog low-pass filter, and output amplifier |
| Hộp | 20-SSOP (DB), 5.30 mm width |
| Số chân | 20 pins |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân PCM1718E/2K 20-ssop (db), 5.30 mm width
Cấu hình chân cho PCM1718E/2K (20-ssop (db), 5.30 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1718E/2K.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1718E/2K phù hợp cho 6 Áp dụngs: CD and Digital-Audio Output, Home-Theater Audio Module, Active Speaker Interface, Multimedia Audio Adapter, Industrial Audio Control Panel, Portable Consumer Audio Device.
CD and Digital-Audio Output
The PCM1718E/2K fits a CD-player or digital-audio decoding module that receives 18-bit I2S samples at up to 48 kHz and requires left- and right-channel analog outputs. Its 8-times oversampling digital filter, multilevel delta-sigma DAC, analog low-pass filter, and integrated output amplifier provide a complete conversion path in one 20-SSOP device. The specified 100 dB SNR, 96 dB dynamic range, and -90 dB THD+N establish the key performance envelope for the audio path. Use the manufacturer application circuit to select the output mode, connect the digital interface, and place bypass components; the main design benefit is fewer discrete analog stages than a basic converter-only implementation.
Được đề xuất
Home-Theater Audio Module
The PCM1718E/2K is suitable for a home-theater or multimedia board that accepts an I2S audio stream and produces stereo analog signals for amplifiers and active speakers. Its 18-bit conversion capability, 48 kHz maximum sampling rate, and -90 dB THD+N target support conventional lossless-audio playback paths, while 100 dB SNR provides headroom above the program material’s noise floor. Because the converter includes analog filtering and an output amplifier, the design can be organized around a compact digital-to-analog section. Follow the Texas Instruments reference connection for output loading, supply bypassing, and analog grounding to preserve the stated noise and distortion performance.
Được đề xuất
Active Speaker Interface
The PCM1718E/2K can serve as the stereo digital-to-analog stage in an active-speaker controller receiving I2S audio at 48 kHz. Its two-channel architecture eliminates the need to instantiate separate converters for left and right channels, and the integrated delta-sigma DAC, analog low-pass filter, and output amplifier shorten the analog output path. The 20-SSOP surface-mount package also supports compact multi-board speaker electronics. The design must still verify the selected output configuration against the intended speaker-interface load and preserve a low-noise analog reference; the converter’s 100 dB SNR is useful where the downstream amplifier and speaker system require a clean source signal.
Được đề xuất
Multimedia Audio Adapter
The PCM1718E/2K fits a compact multimedia adapter that converts an I2S source into analog audio for headphones, powered speakers, or another analog input. Supporting normal 18-bit data at up to 48 kHz addresses common digital-audio transport rates, while the integrated output-amplifier section reduces the component count of the output stage. The converter’s -90 dB THD+N and 96 dB dynamic range provide useful limits when evaluating the complete audio chain. Place the device according to the Texas Instruments DB-package drawing, keep the analog path compact, and use the recommended decoupling arrangement to minimize switching or digital coupling into the left- and right-channel outputs.
Được đề xuất
Industrial Audio Control Panel
The PCM1718E/2K is applicable to an industrial audio panel or embedded control interface that receives digital playback audio and presents a stereo analog output. Its two-channel 18-bit architecture is appropriate for status prompts, machine interfaces, and local audio monitoring where independent left and right outputs are useful. The 48 kHz sampling limit matches the PCM1718 operating envelope, and the integrated filtering and output amplification simplify implementation compared with a discrete converter chain. Designers should assess the analog ground strategy carefully because industrial systems can combine digital switching and audio circuitry on the same board. The manufacturer’s recommended decoupling, output configuration, and layout should be preserved rather than treating the converter as an unrestricted line-output component.
Được đề xuất
Portable Consumer Audio Device
The PCM1718E/2K can be integrated into a portable consumer-audio product that accepts I2S playback data and requires compact stereo analog conversion. Its 20-SSOP surface-mount package, two-channel output, and integrated digital filter, delta-sigma DAC, analog low-pass filter, and output amplifier reduce board-space requirements. The specified 100 dB SNR and -90 dB THD+N support high-quality signal generation for portable speakers or headphone amplification stages. The design must follow the manufacturer’s package drawing and analog-output configuration, with particular care placed on supply layout and ground isolation because battery-powered systems may contain fast-switching regulators and display circuitry near the audio converter.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1718E/2K — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM1718E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 20-SSOP (DB) | 20-SSOP (DB) |
| Product Type | Stereo audio DAC | Stereo audio DAC |
| Resolution | 18 bits | 18 bits |
| Channel Count | 2 channels | 2 channels |
| Maximum Sampling Rate | 48 kHz | 48 kHz |
| Digital Interface | I2S | I2S |
| Signal-to-Noise Ratio | 100 dB | 100 dB |
| Dynamic Range | 96 dB | 96 dB |
| THD+N | -90 dB | -90 dB |
| Digital Filter Oversampling | 8 times | 8 times |
| Pin Count | 20 pins | 20 pins |
Bảo phân biệt quan trọng
- Complete integrated stereo conversion chain (vsPCM1718E)
- High-definition stereo performance in a compact package (vsPCM1718E)
- Single-package left- and right-channel conversion (vsPCM1718E)
Ghi chú thiết kế
Use the Texas Instruments DB-package land pattern and pin-1 orientation shown in the PCM1718 datasheet. The PCM1718E/2K is a 20-SSOP device, so a generic 20-pin footprint should not be assumed without checking lead pitch, body width, and polarity. Keep digital-interface routing away from the left- and right-channel analog outputs, and place the required bypass capacitors close to their associated supply pins.
Route the analog output paths as short and symmetric as practical between the converter pins, external components, and downstream audio input. Maintain a continuous analog-ground reference and avoid sharing narrow return paths between the DAC outputs and noisy digital or switching circuitry. The stated 100 dB SNR and -90 dB THD+N figures depend on a clean implementation, so follow the manufacturer’s typical application circuit when selecting component values and grounding boundaries.
Do not select the analog output mode or external filtering network solely from generic SSOP examples. PCM1718E/2K applications depend on the pin descriptions, output configuration, and loading conditions in the Texas Instruments datasheet. Also distinguish PCM1718E/2K from PCM1718E by the ordering suffix and confirm reel quantity and shipping form before committing an exact part number to a production BOM.
Thông tin tuân thủ
The available product information does not state the exact compliance status for PCM1718E/2K. Obtain current environmental and material declarations from Texas Instruments before making a production compliance determination.