Texas Instruments

PCM5252RHBR - 32-Bit 384kHz Stereo DAC | Texas Instruments

부품 번호: PCM5252RHBR ✓ 활성
1.65 V to 1.95 V, 3 V to 3.46 V Vdss 32-VQFN (RHB), 5 x 5 mm Package
MOQ: 1 |

PCM5252RHBR 개요

The Texas Instruments PCM5252RHBR is a 32-bit stereo differential-output digital-to-analog converter with support for sampling rates up to 384 kHz, 114 dB dynamic range, 4.2-VRMS DirectPath output, miniDSP processing, and Smart Amp capability. It is housed in a 32-pin VQFN (RHB) package measuring 5 x 5 mm and is intended for high-performance audio signal conversion.

A stereo DAC is a digital-to-analog converter that reconstructs continuous analog audio waveforms from sampled digital data. Within the signal-chain hierarchy, it belongs to the audio data-converter class, sits below ADC/DAC conversion, and supports digital audio systems such as powered speakers, active crossovers, soundbars, television platforms, and networked audio equipment. PCM5252RHBR combines a high-resolution stereo DAC with digital signal processing and integrated speaker-amplifier intelligence.

Principal features include 32-bit PCM processing, operation up to 384 kHz, 114 dB dynamic range, and fully differential analog outputs. DirectPath output supports 4.2-VRMS capability, while the miniDSP block enables programmable audio filtering and signal conditioning. Smart Amp capability provides a path toward speaker-driver monitoring and protection when paired with suitable system hardware and software.

The device uses a segment-DAC architecture designed for high-performance audio reproduction and improved clock-jitter tolerance. Digital audio data is accepted through an I2S or PCM-compatible interface, while separate analog and digital supply domains support careful power partitioning. Its 32-VQFN package supports compact placement but requires careful thermal and layout planning because the exposed pad must connect to the ground plane through the manufacturer-recommended footprint.

Typical applications include active loudspeakers, multimedia speaker systems, soundbar audio paths, Bluetooth and wireless speaker platforms, smart-home audio nodes, and consumer playback equipment. In these systems, the PCM5252RHBR can provide a high-resolution digital-to-analog stage while miniDSP features address crossover, EQ, or other programmable processing requirements.

For implementation, place input and output capacitors close to their associated pins, provide continuous ground planes beneath and around the device, and keep high-current switching circuitry away from sensitive audio routes. Confirm the exposed-pad land pattern, reference configuration, and decoupling network against the manufacturer datasheet before releasing PCB artwork.

This page combines the exact device identity, package details, sourcing information, candidate drop-in analysis, application guidance, and practical design notes into one engineering-focused reference for evaluating the PCM5252RHBR.

드롭인 대체품: PCM5252RHBR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

PCM5242RHBR

✅ 드롭인
Texas Instruments
📦 32-VQFN (RHB), 5 x 5 mm
Stereo differential-output audio DAC · 32 bit · 384 kHz · 114 dB · Differential · 4.2 VRMS · Segment-DAC architecture · PCM interface

가격 문의

데이터시트 보기 →

PCM5252RHBR 최대 정격 & 전기적 특성

Device Type Stereo differential-output audio DAC
분해능 32 bit
Maximum Sampling Rate 384 kHz
Dynamic Range 114 dB
Output Capability 4.2 VRMS DirectPath
Digital Audio Interface I2S, PCM
DSP Capability miniDSP
Amplifier Capability Smart Amp
패키지 32-VQFN (RHB), 5 x 5 mm
실장 유형 Surface mount
Exposed Pad Yes
Analog Supply Voltage 1.65 V to 1.95 V, 3 V to 3.46 V
동작 온도 -25 °C to 85 °C
출력 구성 Stereo differential
Architecture Segment DAC
Terminal Count 32 terminals
Package Code HVQCCN
Package Shape Square
Lead Form No lead

PCM5252RHBR square 핀 구성 가이드

PCM5252RHBR(square 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PCM5252RHBR의 square 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PCM5252RHBR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PCM5252RHBR 적합 용도: 6 애플리케이션s: Powered Stereo Speakers, Soundbar Audio Processing, Bluetooth Speaker, Active Crossover System, Networked Audio Node, Digital Audio Test and Measurement.

🎧

Powered Stereo Speakers

The PCM5252RHBR fits the digital-to-analog stage of an active stereo speaker because it provides 32-bit conversion, rates up to 384 kHz, differential outputs, and 4.2-VRMS DirectPath capability. The dual output architecture can feed a balanced or suitably configured analog power-amplifier stage while reducing susceptibility to common-mode noise in the audio path. Its miniDSP capability can also support programmable crossover, EQ, or speaker-response functions when the system requires active digital processing. The designer should treat Smart Amp as a coordinated platform capability, verify supported speaker parameters, and confirm clocking and signal levels with the selected amplifier and system controller.

📺

Soundbar Audio Processing

PCM5252RHBR is suitable for the main stereo playback path of a soundbar that combines streaming audio, local sources, and active amplification. Its 114 dB dynamic range supports low-distortion reconstruction, while 384 kHz PCM handling accommodates high-resolution sources when the source device and transport clocking are equally capable. Differential outputs help maintain signal integrity between the DAC and downstream amplifiers, particularly in a densely populated enclosure. The miniDSP block can implement response shaping or channel processing without adding a separate processor, although deployment requires a defined DSP program and a stable master clock. PCB placement should isolate the audio path from switching-regulator and wireless-radio regions.

📱

Bluetooth Speaker

A Bluetooth speaker can use PCM5252RHBR after the wireless audio decoder has delivered digital audio to the system. The converter's 32-bit interface and support for I2S or PCM create a straightforward digital handoff, while the segment-DAC architecture supports high-performance audio reproduction. Differential outputs are valuable in compact products where ground bounce and radio-frequency coupling can affect analog quality, so component placement and return-current paths require care. The Smart Amp feature is useful only when the complete loudspeaker-protection and monitoring implementation is supported by the selected software and power stage. Engineers should evaluate clock-jitter performance, startup behavior, and the available rail sequencing in the final enclosure.

🔧

Active Crossover System

PCM5252RHBR can serve as the high-resolution playback converter in an active loudspeaker crossover that uses digital signal processing to split the spectrum before separate amplifiers drive tweeters, midrange drivers, and woofers. Its miniDSP capability is the central benefit because filters and other transformations can be implemented in a controlled digital domain rather than through a large network of passive components. Differential analog outputs preserve signal integrity as the DAC connects to multiple amplifier inputs. The system must establish a common sample rate, low-jitter clock strategy, and synchronized channel startup. Filter coefficients, delay alignment, and thermal behavior should be validated at the system level instead of inferred from the converter specifications alone.

🧩

Networked Audio Node

PCM5252RHBR is appropriate for a networked speaker or smart-home audio node that accepts digital streams and produces a high-quality analog playback signal. Network audio systems may receive compressed data, PCM, or I2S from a host processor, and the PCM5252 provides a dedicated 32-bit conversion stage capable of operating up to 384 kHz. Its differential outputs can drive an external amplifier over a short, well-controlled board trace, while miniDSP permits programmable tonal adjustment or channel routing. A robust design should keep the I2S and control traces away from high-current switching nodes and use a reference clock architecture that meets the converter's jitter requirements. Firmware must also handle format, sample-rate, and mute sequencing correctly.

🖥️

Digital Audio Test and Measurement

The PCM5252RHBR can be evaluated as a high-resolution audio output stage in bench equipment, signal-processing demonstrators, and automated audio test systems. Its 384 kHz maximum rate enables measurement of digital-source integrity and converter performance when paired with appropriate analyzers, while differential outputs can feed balanced instrumentation. The segment-DAC architecture is relevant when assessing dynamic-range and clock-jitter behavior. Smart Amp and miniDSP features should be treated as optional system functions rather than prerequisites for basic output testing. The test fixture must provide clean analog and digital supplies, a low-noise reference clock, and defined output loading. Calibration data should be taken into account when measuring channel gain, THD, and noise.

What is the PCM5252RHBR?
The PCM5252RHBR is a Texas Instruments 32-bit stereo differential-output audio DAC with support for sampling rates up to 384 kHz. It combines 114 dB dynamic range, 4.2-VRMS DirectPath output, miniDSP processing, and Smart Amp capability in a 32-pin VQFN package. According to the Texas Instruments product page, it is designed for high-performance powered-speaker and multimedia audio systems.
What are the key specifications of PCM5252RHBR that engineers should know?
The PCM5252RHBR provides 32-bit resolution, a 384 kHz maximum sampling rate, 114 dB dynamic range, and 4.2-VRMS DirectPath output. Its digital interface supports I2S and PCM, while integrated miniDSP and Smart Amp features add programmable processing and speaker-management capabilities. The device uses a 32-VQFN (RHB) package with a 5 x 5 mm body and an exposed pad.
Where can I download the PCM5252RHBR datasheet PDF?
The official PCM5252 datasheet is accessible through the Texas Instruments PCM5252 product page at https://www.ti.com/product/PCM5252. The manufacturer also provides a datasheet link at https://www.ti.com/lit/gpn/PCM5252. Use the manufacturer document for pin assignments, reference configuration, exposed-pad layout, decoupling values, and application-circuit details.
Where can I find the PCM5252RHBR pinout?
The PCM5252RHBR pinout is published in the Texas Instruments PCM5252 manufacturer datasheet. The device uses the 32-VQFN (RHB) package, so assign all 32 terminals and the exposed thermal pad from the package drawing and pin-description table rather than inferring connections from a generic QFN diagram. The exposed pad is also a land-pattern and assembly-design consideration.
Can PCM5252RHBR be used for a powered speaker?
Yes, the PCM5252RHBR is well suited to a powered-speaker signal path because it combines a 32-bit stereo DAC, 4.2-VRMS DirectPath output, miniDSP processing, and Smart Amp capability. These functions support high-resolution playback and programmable speaker management. The external power-amplifier topology, speaker load, thermal design, and Smart Amp implementation still depend on the selected amplifier and system requirements.
What is the difference between PCM5252RHBR and PCM5242RHBR?
PCM5252RHBR includes 4.2-VRMS DirectPath output, 114 dB dynamic range, miniDSP, and Smart Amp capability, while the PCM5242 is described as a segment-DAC stereo DAC designed for excellent dynamic performance and improved clock-jitter tolerance. The candidate PCM5242RHBR uses the same 32-VQFN RHB package, but verify the two devices’ complete pin maps and control features before treating it as a direct replacement.
Is PCM5252RHBR suitable for a 384 kHz audio system?
Yes, PCM5252RHBR supports PCM audio data at sampling rates up to 384 kHz with 32-bit resolution. This capability suits high-resolution playback and processing systems where the host interface, clocking, and downstream signal path also support the selected rate. Clock quality remains important, and the complete signal chain should be validated for jitter and timing margins.
When should I choose PCM5252RHBR over PCM5242RHBR?
Choose PCM5252RHBR when the design benefits from integrated miniDSP, Smart Amp capability, 4.2-VRMS DirectPath output, and a specified 114 dB dynamic range. Consider PCM5242RHBR when its segment-DAC implementation and electrical characteristics meet the design without requiring the PCM5252 feature set. Because pin compatibility is not established by the package name alone, compare the manufacturer pin tables before replacement.
What is the best drop-in replacement for PCM5252RHBR?
No fully verified drop-in replacement is identified for PCM5252RHBR. PCM5242RHBR is the closest candidate found because it is also a Texas Instruments stereo segment-DAC in a 32-VQFN RHB package, but its complete pin map and feature requirements must be checked before substitution. Do not assume that a shared VQFN footprint guarantees pin-to-pin compatibility or equivalent Smart Amp behavior.
What can replace PCM5252RHBR?
PCM5242RHBR is the strongest candidate for evaluation as a PCM5252RHBR alternative because it uses the same 32-VQFN RHB package and implements a stereo segment DAC. It is a drop-in replacement only if every power, clock, digital-interface, analog-output, control, and exposed-pad connection matches the PCM5252RHBR pinout. The verified cross-reference results do not establish a fully confirmed replacement.
Is PCM5252RHBR the same as PCM5242RHBR?
No, PCM5252RHBR and PCM5242RHBR are not functionally identical parts. PCM5252RHBR is specified with 114 dB dynamic range, 4.2-VRMS DirectPath, miniDSP, and Smart Amp capability, whereas PCM5242RHBR is described as a segment-DAC stereo DAC. Their common 32-VQFN package supports footprint review, but full equivalence requires pin-by-pin and functional verification.
Where to buy PCM5252RHBR online?
Use the Request a Quote form on this page to request PCM5252RHBR availability, unit pricing, and lead time from XAIPART. The form provides a single route for current commercial terms without relying on a static price or an unconfirmed inventory claim. Include your required quantity, target packaging, date code needs, and production schedule in the request.
What is the price of PCM5252RHBR?
Current PCM5252RHART pricing is obtained through the Request a Quote form on this page. Because market pricing and inventory can change by quantity, date code, and packaging, submit the required quantity and production forecast for an accurate quotation. The structured product page supplies the live commercial response without embedding a potentially stale price.
What is the lead time for PCM5252RHBR?
Request the current PCM5252RHBR lead time through the Request a Quote form on this page. Include your annual usage, order quantity, approved vendor list requirements, and target date so the commercial response can reflect the actual schedule. Tape-and-reel procurement should also specify the required reel quantity and date-code preference.
Is PCM5252RHBR in stock?
Use the Request a Quote form on this page to check current PCM5252RHBR stock and allocation status. Inventory varies by quantity, package configuration, and date code, so a general listing alone is not a reliable allocation guarantee. Provide your forecast and production schedule to obtain a supply response tied to the requested quantity.
Does PCM5252RHBR meet RoHS and AEC-Q100 requirements?
PCM5252RHBR is a RoHS and REACH compliance status is shown as unknown because the manufacturer documents do not provide an explicit declaration in the cited material. AEC-Q100 qualification also remains unconfirmed for this ordering code. For an automotive or regulated production release, request the current material-compliance and qualification documents before releasing the BOM.

엔지니어링 참조 데이터: PCM5252RHBR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose PCM5252RHBR when the design requires a 32-bit stereo differential-output DAC capable of 384 kHz operation and benefits from integrated miniDSP and Smart Amp functionality. Its 4.2-VRMS DirectPath output and specified 114 dB dynamic range make it a strong candidate for powered speakers, soundbars, active crossovers, and connected audio products. PCM5242RHBR is the closest package-matched candidate for evaluation when its separate segment-DAC implementation meets the required sound quality and control needs. Before selecting it as a substitute, compare the complete pin map, power requirements, digital interface, analog outputs, exposed-pad connections, and software requirements. A shared 32-VQFN footprint can simplify mechanical comparison, but it does not eliminate the need for electrical and firmware verification.

대체품과의 비교

파라미터 이 제품 PCM5242RHBR
Package 32-VQFN (RHB), 5 x 5 mm 32-VQFN (RHB), 5 x 5 mm
Brand Texas Instruments Texas Instruments
Device Type Stereo differential-output audio DAC Stereo digital-to-analog converter
Architecture Segment DAC Segment DAC

주요 차별점

  • Integrated direct-path stereo output (vs PCM5242RHBR)
  • Integrated programmable processing (vs PCM5242RHBR)
  • Speaker-management integration (vs PCM5242RHBR)
  • Specified high-resolution conversion performance (vs PCM5242RHBR)

설계 노트

Use the manufacturer-recommended 32-VQFN footprint and preserve the exposed-pad land pattern. Connect the exposed pad to the appropriate ground plane with the full recommended via and solder area, subject to the datasheet and assembly guidelines. Place input, output, and reference capacitors close to their designated pins with short return paths. Differential output routing should use closely coupled geometry where practical, while digital clock and I2S traces should remain separated from sensitive analog nodes.

Create quiet supply and ground partitioning for the analog and digital domains. Route the differential outputs away from switching-regulator inductors, radio modules, and high-speed memory buses, and keep the reference and clock circuitry physically separated from noisy sources. Establish the system clock before enabling the outputs and account for every synchronization, mute, and power-sequence transition. These measures protect the converter's 114 dB dynamic-range capability and reduce the risk of clock-jitter-induced distortion.

Validate the complete digital-audio interface with the intended master clock, I2S or PCM data lines, and board-level loading. Check setup and hold timing at the actual source-device output, confirm word and frame alignment, and test the highest intended sample rate. Because the device supports rates up to 384 kHz, do not assume that a clock arrangement that works at 48 kHz will retain the same timing or jitter margin at the maximum rate.

Do not substitute PCM5242RHBR solely because it uses the same 32-VQFN RHB package. Compare power pins, clock inputs, digital interface signals, analog outputs, control signals, exposed-pad connections, and software configuration between the two devices. Also verify whether Smart Amp and miniDSP behavior is required by the product. A shared package dimension reduces board-rewrite effort but does not by itself establish pin-to-pin or functional equivalence.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The manufacturer product page and cited search results do not explicitly state material-compliance or automotive-qualification status for PCM5252RHBR. Obtain current supporting documents before production release.

데이터 검증일: 2026-11-20 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PCM5252RHBR datasheet PCM5252RHBR specifications PCM5252RHBR pinout PCM5252RHBR datasheet pdf Texas Instruments PCM5252RHBR PCM5252RHBR 32-VQFN PCM5252RHBR 384kHz PCM5252RHBR DirectPath output PCM5252RHBR replacement PCM5252RHBR equivalent PCM5252RHBR vs PCM5242RHBR PCM5252RHBR powered speaker PCM5252RHBR price PCM5252RHBR stock

관련 부품 & 용어

Texas Instruments PCM5252 PCM5252RHBR PCM5242RHBR digital-to-analog converter stereo DAC audio DAC ADC/DAC converter semiconductor 32-bit resolution 384 kHz sampling rate 114 dB dynamic range 4.2-VRMS DirectPath differential output miniDSP Smart Amp segment-DAC architecture I2S interface PCM interface clock jitter 32-VQFN RHB package QFN family surface mount powered stereo speakers active crossover
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기