PCM5252RHBR - 32-Bit 384kHz Stereo DAC | Texas Instruments
N.º da peça: PCM5252RHBR ✓ AtivoPCM5252RHBR Visão geral
A stereo DAC is a digital-to-analog converter that reconstructs continuous analog audio waveforms from sampled digital data. Within the signal-chain hierarchy, it belongs to the audio data-converter class, sits below ADC/DAC conversion, and supports digital audio systems such as powered speakers, active crossovers, soundbars, television platforms, and networked audio equipment. PCM5252RHBR combines a high-resolution stereo DAC with digital signal processing and integrated speaker-amplifier intelligence.
Principal features include 32-bit PCM processing, operation up to 384 kHz, 114 dB dynamic range, and fully differential analog outputs. DirectPath output supports 4.2-VRMS capability, while the miniDSP block enables programmable audio filtering and signal conditioning. Smart Amp capability provides a path toward speaker-driver monitoring and protection when paired with suitable system hardware and software.
The device uses a segment-DAC architecture designed for high-performance audio reproduction and improved clock-jitter tolerance. Digital audio data is accepted through an I2S or PCM-compatible interface, while separate analog and digital supply domains support careful power partitioning. Its 32-VQFN package supports compact placement but requires careful thermal and layout planning because the exposed pad must connect to the ground plane through the manufacturer-recommended footprint.
Typical applications include active loudspeakers, multimedia speaker systems, soundbar audio paths, Bluetooth and wireless speaker platforms, smart-home audio nodes, and consumer playback equipment. In these systems, the PCM5252RHBR can provide a high-resolution digital-to-analog stage while miniDSP features address crossover, EQ, or other programmable processing requirements.
For implementation, place input and output capacitors close to their associated pins, provide continuous ground planes beneath and around the device, and keep high-current switching circuitry away from sensitive audio routes. Confirm the exposed-pad land pattern, reference configuration, and decoupling network against the manufacturer datasheet before releasing PCB artwork.
This page combines the exact device identity, package details, sourcing information, candidate drop-in analysis, application guidance, and practical design notes into one engineering-focused reference for evaluating the PCM5252RHBR.
Alternativas drop-in para PCM5252RHBR — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
PCM5242RHBR
✅ Drop-InConsulte o preço
Ver ficha técnica →PCM5252RHBR Classificações máximas e características elétricas
| Device Type | Stereo differential-output audio DAC |
| Resolução | 32 bit |
| Maximum Sampling Rate | 384 kHz |
| Dynamic Range | 114 dB |
| Output Capability | 4.2 VRMS DirectPath |
| Digital Audio Interface | I2S, PCM |
| DSP Capability | miniDSP |
| Amplifier Capability | Smart Amp |
| Encapsulamento | 32-VQFN (RHB), 5 x 5 mm |
| Tipo de montagem | Surface mount |
| Exposed Pad | Yes |
| Analog Supply Voltage | 1.65 V to 1.95 V, 3 V to 3.46 V |
| Temperatura de operação | -25 °C to 85 °C |
| Configuração de saída | Stereo differential |
| Architecture | Segment DAC |
| Terminal Count | 32 terminals |
| Package Code | HVQCCN |
| Package Shape | Square |
| Lead Form | No lead |
Guia de Configuração de Pinos do PCM5252RHBR square
Configuração de pinos para PCM5252RHBR (pacote square). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para PCM5252RHBR.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
PCM5252RHBR é adequado para 6 aplicaçãos: Powered Stereo Speakers, Soundbar Audio Processing, Bluetooth Speaker, Active Crossover System, Networked Audio Node, Digital Audio Test and Measurement.
Powered Stereo Speakers
The PCM5252RHBR fits the digital-to-analog stage of an active stereo speaker because it provides 32-bit conversion, rates up to 384 kHz, differential outputs, and 4.2-VRMS DirectPath capability. The dual output architecture can feed a balanced or suitably configured analog power-amplifier stage while reducing susceptibility to common-mode noise in the audio path. Its miniDSP capability can also support programmable crossover, EQ, or speaker-response functions when the system requires active digital processing. The designer should treat Smart Amp as a coordinated platform capability, verify supported speaker parameters, and confirm clocking and signal levels with the selected amplifier and system controller.
Recomendado
Soundbar Audio Processing
PCM5252RHBR is suitable for the main stereo playback path of a soundbar that combines streaming audio, local sources, and active amplification. Its 114 dB dynamic range supports low-distortion reconstruction, while 384 kHz PCM handling accommodates high-resolution sources when the source device and transport clocking are equally capable. Differential outputs help maintain signal integrity between the DAC and downstream amplifiers, particularly in a densely populated enclosure. The miniDSP block can implement response shaping or channel processing without adding a separate processor, although deployment requires a defined DSP program and a stable master clock. PCB placement should isolate the audio path from switching-regulator and wireless-radio regions.
Recomendado
Bluetooth Speaker
A Bluetooth speaker can use PCM5252RHBR after the wireless audio decoder has delivered digital audio to the system. The converter's 32-bit interface and support for I2S or PCM create a straightforward digital handoff, while the segment-DAC architecture supports high-performance audio reproduction. Differential outputs are valuable in compact products where ground bounce and radio-frequency coupling can affect analog quality, so component placement and return-current paths require care. The Smart Amp feature is useful only when the complete loudspeaker-protection and monitoring implementation is supported by the selected software and power stage. Engineers should evaluate clock-jitter performance, startup behavior, and the available rail sequencing in the final enclosure.
Recomendado
Active Crossover System
PCM5252RHBR can serve as the high-resolution playback converter in an active loudspeaker crossover that uses digital signal processing to split the spectrum before separate amplifiers drive tweeters, midrange drivers, and woofers. Its miniDSP capability is the central benefit because filters and other transformations can be implemented in a controlled digital domain rather than through a large network of passive components. Differential analog outputs preserve signal integrity as the DAC connects to multiple amplifier inputs. The system must establish a common sample rate, low-jitter clock strategy, and synchronized channel startup. Filter coefficients, delay alignment, and thermal behavior should be validated at the system level instead of inferred from the converter specifications alone.
Recomendado
Networked Audio Node
PCM5252RHBR is appropriate for a networked speaker or smart-home audio node that accepts digital streams and produces a high-quality analog playback signal. Network audio systems may receive compressed data, PCM, or I2S from a host processor, and the PCM5252 provides a dedicated 32-bit conversion stage capable of operating up to 384 kHz. Its differential outputs can drive an external amplifier over a short, well-controlled board trace, while miniDSP permits programmable tonal adjustment or channel routing. A robust design should keep the I2S and control traces away from high-current switching nodes and use a reference clock architecture that meets the converter's jitter requirements. Firmware must also handle format, sample-rate, and mute sequencing correctly.
Recomendado
Digital Audio Test and Measurement
The PCM5252RHBR can be evaluated as a high-resolution audio output stage in bench equipment, signal-processing demonstrators, and automated audio test systems. Its 384 kHz maximum rate enables measurement of digital-source integrity and converter performance when paired with appropriate analyzers, while differential outputs can feed balanced instrumentation. The segment-DAC architecture is relevant when assessing dynamic-range and clock-jitter behavior. Smart Amp and miniDSP features should be treated as optional system functions rather than prerequisites for basic output testing. The test fixture must provide clean analog and digital supplies, a low-noise reference clock, and defined output loading. Calibration data should be taken into account when measuring channel gain, THD, and noise.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para PCM5252RHBR — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | PCM5242RHBR |
|---|---|---|
| Package | 32-VQFN (RHB), 5 x 5 mm | 32-VQFN (RHB), 5 x 5 mm |
| Brand | Texas Instruments | Texas Instruments |
| Device Type | Stereo differential-output audio DAC | Stereo digital-to-analog converter |
| Architecture | Segment DAC | Segment DAC |
Principais diferenciais
- Integrated direct-path stereo output (vs PCM5242RHBR)
- Integrated programmable processing (vs PCM5242RHBR)
- Speaker-management integration (vs PCM5242RHBR)
- Specified high-resolution conversion performance (vs PCM5242RHBR)
Notas de projeto
Use the manufacturer-recommended 32-VQFN footprint and preserve the exposed-pad land pattern. Connect the exposed pad to the appropriate ground plane with the full recommended via and solder area, subject to the datasheet and assembly guidelines. Place input, output, and reference capacitors close to their designated pins with short return paths. Differential output routing should use closely coupled geometry where practical, while digital clock and I2S traces should remain separated from sensitive analog nodes.
Create quiet supply and ground partitioning for the analog and digital domains. Route the differential outputs away from switching-regulator inductors, radio modules, and high-speed memory buses, and keep the reference and clock circuitry physically separated from noisy sources. Establish the system clock before enabling the outputs and account for every synchronization, mute, and power-sequence transition. These measures protect the converter's 114 dB dynamic-range capability and reduce the risk of clock-jitter-induced distortion.
Validate the complete digital-audio interface with the intended master clock, I2S or PCM data lines, and board-level loading. Check setup and hold timing at the actual source-device output, confirm word and frame alignment, and test the highest intended sample rate. Because the device supports rates up to 384 kHz, do not assume that a clock arrangement that works at 48 kHz will retain the same timing or jitter margin at the maximum rate.
Do not substitute PCM5242RHBR solely because it uses the same 32-VQFN RHB package. Compare power pins, clock inputs, digital interface signals, analog outputs, control signals, exposed-pad connections, and software configuration between the two devices. Also verify whether Smart Amp and miniDSP behavior is required by the product. A shared package dimension reduces board-rewrite effort but does not by itself establish pin-to-pin or functional equivalence.
Informações de conformidade
The manufacturer product page and cited search results do not explicitly state material-compliance or automotive-qualification status for PCM5252RHBR. Obtain current supporting documents before production release.