PCM55HPG6 - 16-Bit Parallel DAC | Texas Instruments
부품 번호: PCM55HPG6 ✓ 활성PCM55HPG6 개요
A digital-to-analog converter, or DAC, is an interface IC that transforms parallel or serial digital codes into proportional analog voltage or current. The PCM55HPG6 belongs to the DAC hierarchy within data-converter ICs, ADC/DAC devices, and broader semiconductor signal-conversion systems. Its parallel interface reduces serial-to-parallel conversion overhead, making the device suitable for systems that already handle multi-bit digital audio data in parallel.
The converter provides 16-bit resolution and typically 15-bit monotonicity. The K-grade device has approximately -92 dB total harmonic distortion and 96 dB dynamic range. Its stated settling time is no more than 3 μs, while dual positive and negative 5 V supplies support bipolar analog-output circuitry. These characteristics place the emphasis on compact digital audio conversion, laboratory signal generation, and instrumentation rather than high-resolution modern playback formats.
Internally, the PCM55HPG6 uses a parallel digital input arrangement and a DAC output stage designed to produce stable analog levels from changing binary codes. The dual-supply architecture allows bipolar signal generation without deriving negative analog swing from a single positive source. Because the part is supplied in a 24-pin SOIC, PCB designs must provide adequate routing clearance between the parallel data bus, analog output, supply pins, and ground returns.
Typical applications include digital audio synthesis, audio test and measurement equipment, signal-generation instruments, digital mixing equipment, and industrial control or monitoring systems with compact analog-output requirements. The 3 μs settling specification is particularly relevant when the output must settle quickly after a new digital code is applied, while the 96 dB dynamic range supports audio-band signal amplitude range.
Designers should pay close attention to layout separation between the digital input bus and analog output, provide clean supply bypassing, and observe the package pin configuration in the manufacturer datasheet before assigning board signals. The parallel interface requires deliberate routing and timing, and unused inputs must be handled according to the device instructions rather than left without consideration.
This page organizes the converter specifications, package information, sourcing options, compatible family parts, and application guidance into a practical engineering reference. It also highlights the measurable differences among suffix variants so designers can select the correct 24-pin SOIC device without assuming that equivalent descriptions always imply identical orderable packaging.
드롭인 대체품: PCM55HPG6 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: PCM55HPG6 (동일 폼 팩터 및 풋프린트) — 차이점: Package, Settling Time, Resolution, Data Interface, Supply Voltage.
PCM55HP
✅ 드롭인가격 문의
데이터시트 보기 →PCM55HP/1K
✅ 드롭인가격 문의
데이터시트 보기 →PCM55HPG6 최대 정격 & 전기적 특성
| Device Type | Digital-to-analog converter (DAC) |
| 분해능 | 16 bit |
| Number of Channels | 1 channel |
| Data Interface | Parallel |
| Monotonicity | 15 bit typical |
| Total Harmonic Distortion | -92 dB for K grade |
| Settling Time | 3 us maximum voltage-output settling time |
| Dynamic Range | 96 dB |
| Supply Configuration | Dual positive and negative supplies |
| Power Supply | ±5 V |
| 동작 온도 | 0 °C to 70 °C |
| 패키지 | 24-SOIC (0.295 in, 7.50 mm width) |
| 실장 유형 | Surface mount |
| Packaging | Tube |
| Grade | K grade |
PCM55HPG6 24-soic (0.295 in, 7.50 mm width) 핀 구성 가이드
PCM55HPG6(24-soic (0.295 in, 7.50 mm width) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: PCM55HPG6.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
PCM55HPG6 적합 용도: 6 애플리케이션s: Digital Audio Synthesis, Audio Test and Measurement, Laboratory Signal Generators, Digital Mixing and Control, Industrial Monitoring Systems, Digital Communication Equipment.
Digital Audio Synthesis
The PCM55HPG6 fits digital audio synthesis systems that already present samples as a 16-bit parallel word. Its 16-bit input resolution, 96 dB dynamic range, and 15-bit typical monotonicity support accurate conversion of coded audio into an analog waveform, while the K-grade distortion specification of approximately -92 dB limits added harmonic content. The parallel interface can reduce serial-to-parallel conversion overhead in dedicated audio engines. Dual ±5 V supplies provide the bipolar operating environment needed by the converter, and the 3 μs maximum settling time is relevant when multiple output values are updated rapidly. The 24-pin SOIC footprint makes it practical for compact, surface-mounted audio synthesis hardware.
추천
Audio Test and Measurement
The PCM55HPG6 is suitable for audio test equipment that generates analog waveforms from parallel digital test vectors. A 16-bit parallel interface supports direct connection to digital logic or test-control hardware, while the 3 μs maximum voltage-output settling time helps support rapid signal updates. The 96 dB dynamic range provides a defined signal-amplitude range, and the approximately -92 dB K-grade total harmonic distortion is useful when evaluating harmonic content. Dual ±5 V operation supports bipolar analog output stages. Engineers should pay close attention to digital-to-analog layout separation, output-settling measurement points, and clock or latch timing when using the converter as a precision stimulus source.
추천
Laboratory Signal Generators
The PCM55HPG6 can serve as the digital-to-analog stage of a laboratory signal generator when arbitrary or precomputed waveforms are represented as 16-bit parallel samples. Its 1 μs typical settling behavior supports rapid output changes, and the 96 dB dynamic range provides useful headroom for audio and low-frequency waveform generation. The K-grade device is specified at approximately -92 dB total harmonic distortion, making it appropriate for general laboratory output quality requirements. The 24-pin SOIC package supports compact instrument construction, although careful analog grounding and supply decoupling remain important. Firmware designers must also ensure that the digital word update timing is aligned with the converter's expected latching and settling behavior.
추천
Digital Mixing and Control
The PCM55HPG6 is applicable to digital mixing or control equipment where each channel is represented by a 16-bit parallel value and converted into an analog command or signal. Its single-channel architecture makes it suitable for multi-channel designs that instantiate one converter per signal path. The parallel interface can simplify deterministic data capture from digital processors, while dual ±5 V supplies support bipolar output stages. The 3 μs maximum settling time is valuable when control values change between system updates. Designers should account for bus timing, simultaneous switching activity from the digital input bus, and analog output settling in the overall control-loop timing. A clean reference and well-designed bypass network are equally important for predictable system behavior.
추천
Industrial Monitoring Systems
The PCM55HPG6 can be used in industrial monitoring equipment that translates computed control values into analog outputs for external instruments or actuators. Its 16-bit resolution offers 65,536 digital code levels, while the 96 dB dynamic range and approximately -92 dB K-grade total harmonic distortion help define the resulting analog signal quality. The 0 °C to 70 °C commercial operating range suits ambient-controlled industrial enclosures rather than severe automotive or extended-temperature environments. The 24-pin SOIC package supports automated surface-mount assembly, and the parallel input permits direct connection to suitably buffered digital logic. Robust implementations should provide regulated ±5 V rails, isolate high-current switching paths from the analog output, and include filtering appropriate to the monitored control bandwidth.
추천
Digital Communication Equipment
The PCM55HPG6 is relevant to specialized communication equipment that requires an analog output derived from a parallel digital data source. Its 1 μs typical settling time supports moderate-rate signal updates, while the 16-bit input width provides a straightforward mapping between the digital source and the DAC code range. The dual ±5 V supply arrangement enables bipolar analog levels, and the 24-pin SOIC package permits integration into compact communication modules. The part's 0 °C to 70 °C operating range limits it to appropriately controlled installations. Layout should preserve a continuous analog ground return, keep the parallel data traces away from the output node, and use local supply bypassing to reduce conversion-related disturbance on sensitive communication circuitry.
추천
추천 제품 요약
엔지니어링 참조 데이터: PCM55HPG6 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | PCM55HP | PCM55HP/1K |
|---|---|---|---|
| Package | 24-SOIC (0.295 in, 7.50 mm width) | 24-SOIC - same package | 24-SOIC - same package |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 16 bit | 16 bit | 16 bit |
| Data Interface | Parallel | Parallel | Parallel |
| Number of Channels | 1 channel | 1 channel | 1 channel |
| Packaging | Tube | Tube | Tape and reel |
주요 차별점
- Exact PCM55HPG6 orderable configuration with tube packaging (vs PCM55HP/1K)
- Pin-compatible PCM55HP-family upgrade path (vs PCM55HP)
- No electrical-performance difference in the stated cross-reference (vs PCM55HP)
설계 노트
Route the 16-bit parallel data bus away from the analog output and use a continuous ground reference beneath the converter. Place the input, output, and bypass connections in accordance with the manufacturer application diagram, keeping digital traces short where possible. Because the package is a 24-pin SOIC, adequate lead spacing is required between adjacent signals; check the package drawing against the PCB land pattern before fabrication.
Provide stable, low-noise dual ±5 V rails and bypass each supply close to its associated package pins. The positive and negative rails should be decoupled independently so switching or load activity on one rail does not couple directly into the other. Validate the power rails at the device pins under maximum digital switching activity, because simultaneous data-bus transitions can create ground-bounce and supply-disturbance effects that propagate into the analog output.
Keep the analog output path short and place any required reconstruction or anti-imaging filter close to the converter. Avoid sharing narrow analog traces with digital clock, latch, or data routes. The specified 3 μs maximum voltage-output settling time should be measured at the point where the system requires a valid result, and the acquisition or feedback timing must include sufficient margin for analog settling rather than relying only on digital update timing.
Do not substitute PCM55HP or PCM55HP/1K solely because the core specifications appear similar. Confirm the exact suffix, 24-pin package, temperature grade, supply arrangement, and packaging format in the controlled bill of materials. The two alternatives are identified as complete replacements, but procurement records and assembly instructions must still use the approved orderable number for each production configuration.
규정 준수 정보
The commercial operating range of 0 °C to 70 °C is documented, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated. AEC-Q100 is treated as not applicable because the part is a commercial-temperature audio DAC rather than an automotive-qualified device.