Texas Instruments

PCM55HPG6 - 16-Bit Parallel DAC | Texas Instruments

料号: PCM55HPG6 ✓ 量产中
Dual positive and negative supplies Vdss 24-SOIC (0.295 in, 7.50 mm width) Package
最小起订量: 1 |

PCM55HPG6 概述

The Texas Instruments PCM55HPG6 is a 16-bit parallel-input digital-to-analog converter with 1 μs typical settling time, dual ±5 V power supplies, and 96 dB dynamic range, housed in a 24-pin SOIC package. It converts digital audio samples into an analog voltage through a parallel input interface and is intended for precision signal-generation and audio-reconstruction equipment.

A digital-to-analog converter, or DAC, is an interface IC that transforms parallel or serial digital codes into proportional analog voltage or current. The PCM55HPG6 belongs to the DAC hierarchy within data-converter ICs, ADC/DAC devices, and broader semiconductor signal-conversion systems. Its parallel interface reduces serial-to-parallel conversion overhead, making the device suitable for systems that already handle multi-bit digital audio data in parallel.

The converter provides 16-bit resolution and typically 15-bit monotonicity. The K-grade device has approximately -92 dB total harmonic distortion and 96 dB dynamic range. Its stated settling time is no more than 3 μs, while dual positive and negative 5 V supplies support bipolar analog-output circuitry. These characteristics place the emphasis on compact digital audio conversion, laboratory signal generation, and instrumentation rather than high-resolution modern playback formats.

Internally, the PCM55HPG6 uses a parallel digital input arrangement and a DAC output stage designed to produce stable analog levels from changing binary codes. The dual-supply architecture allows bipolar signal generation without deriving negative analog swing from a single positive source. Because the part is supplied in a 24-pin SOIC, PCB designs must provide adequate routing clearance between the parallel data bus, analog output, supply pins, and ground returns.

Typical applications include digital audio synthesis, audio test and measurement equipment, signal-generation instruments, digital mixing equipment, and industrial control or monitoring systems with compact analog-output requirements. The 3 μs settling specification is particularly relevant when the output must settle quickly after a new digital code is applied, while the 96 dB dynamic range supports audio-band signal amplitude range.

Designers should pay close attention to layout separation between the digital input bus and analog output, provide clean supply bypassing, and observe the package pin configuration in the manufacturer datasheet before assigning board signals. The parallel interface requires deliberate routing and timing, and unused inputs must be handled according to the device instructions rather than left without consideration.

This page organizes the converter specifications, package information, sourcing options, compatible family parts, and application guidance into a practical engineering reference. It also highlights the measurable differences among suffix variants so designers can select the correct 24-pin SOIC device without assuming that equivalent descriptions always imply identical orderable packaging.

直接替换替代料: PCM55HPG6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: PCM55HPG6 (相同外形与封装尺寸) ——差异在于 Package, Settling Time, Resolution, Data Interface, Supply Voltage.

Texas Instruments
Package: 24-pin SOP
Settling Time: 3 µs
Resolution: 16 bits
对比 PCM55HPG6 →
Texas Instruments
Package: 24-SOIC, 0.295 inch, 7.50 mm width
Settling Time: 3 us
Supply Voltage: +/-12 V for the PCM54 family

PCM55HP

✅ 直接替换
Texas Instruments
📦 24-SOIC (0.295 in, 7.50 mm width)
16-bit monolithic digital-to-analog converter · Parallel · 16 bits · 15 bits · 92 dB · 96 dB · 3 µs · ±1 mA audio output

联系询价

查看数据手册 →

PCM55HP/1K

✅ 直接替换
Texas Instruments
📦 24-SOIC (0.295 in, 7.50 mm width)
Monolithic audio digital-to-analog converter · 16 bit · 15 bit typical · 16-bit parallel · -92 dB, K grade · 3 us · 96 dB · +/-1 mA

联系询价

查看数据手册 →

PCM55HPG6 最大额定值与电气特性

Device Type Digital-to-analog converter (DAC)
分辨率 16 bit
Number of Channels 1 channel
Data Interface Parallel
Monotonicity 15 bit typical
Total Harmonic Distortion -92 dB for K grade
Settling Time 3 us maximum voltage-output settling time
Dynamic Range 96 dB
Supply Configuration Dual positive and negative supplies
Power Supply ±5 V
工作温度 0 °C to 70 °C
封装 24-SOIC (0.295 in, 7.50 mm width)
安装类型 Surface mount
Packaging Tube
Grade K grade

PCM55HPG6 24-soic (0.295 in, 7.50 mm width) 引脚配置指南

PCM55HPG6(24-soic (0.295 in, 7.50 mm width) 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

PCM55HPG6 的 24-soic (0.295 in, 7.50 mm width) 封装引脚图

暂无详细引脚数据: PCM55HPG6.

请参阅 数据手册 以查看完整引脚配置。

典型应用

PCM55HPG6 适用于 6 应用s: Digital Audio Synthesis, Audio Test and Measurement, Laboratory Signal Generators, Digital Mixing and Control, Industrial Monitoring Systems, Digital Communication Equipment.

🎧

Digital Audio Synthesis

The PCM55HPG6 fits digital audio synthesis systems that already present samples as a 16-bit parallel word. Its 16-bit input resolution, 96 dB dynamic range, and 15-bit typical monotonicity support accurate conversion of coded audio into an analog waveform, while the K-grade distortion specification of approximately -92 dB limits added harmonic content. The parallel interface can reduce serial-to-parallel conversion overhead in dedicated audio engines. Dual ±5 V supplies provide the bipolar operating environment needed by the converter, and the 3 μs maximum settling time is relevant when multiple output values are updated rapidly. The 24-pin SOIC footprint makes it practical for compact, surface-mounted audio synthesis hardware.

🔧

Audio Test and Measurement

The PCM55HPG6 is suitable for audio test equipment that generates analog waveforms from parallel digital test vectors. A 16-bit parallel interface supports direct connection to digital logic or test-control hardware, while the 3 μs maximum voltage-output settling time helps support rapid signal updates. The 96 dB dynamic range provides a defined signal-amplitude range, and the approximately -92 dB K-grade total harmonic distortion is useful when evaluating harmonic content. Dual ±5 V operation supports bipolar analog output stages. Engineers should pay close attention to digital-to-analog layout separation, output-settling measurement points, and clock or latch timing when using the converter as a precision stimulus source.

📟

Laboratory Signal Generators

The PCM55HPG6 can serve as the digital-to-analog stage of a laboratory signal generator when arbitrary or precomputed waveforms are represented as 16-bit parallel samples. Its 1 μs typical settling behavior supports rapid output changes, and the 96 dB dynamic range provides useful headroom for audio and low-frequency waveform generation. The K-grade device is specified at approximately -92 dB total harmonic distortion, making it appropriate for general laboratory output quality requirements. The 24-pin SOIC package supports compact instrument construction, although careful analog grounding and supply decoupling remain important. Firmware designers must also ensure that the digital word update timing is aligned with the converter's expected latching and settling behavior.

🎛️

Digital Mixing and Control

The PCM55HPG6 is applicable to digital mixing or control equipment where each channel is represented by a 16-bit parallel value and converted into an analog command or signal. Its single-channel architecture makes it suitable for multi-channel designs that instantiate one converter per signal path. The parallel interface can simplify deterministic data capture from digital processors, while dual ±5 V supplies support bipolar output stages. The 3 μs maximum settling time is valuable when control values change between system updates. Designers should account for bus timing, simultaneous switching activity from the digital input bus, and analog output settling in the overall control-loop timing. A clean reference and well-designed bypass network are equally important for predictable system behavior.

🏭

Industrial Monitoring Systems

The PCM55HPG6 can be used in industrial monitoring equipment that translates computed control values into analog outputs for external instruments or actuators. Its 16-bit resolution offers 65,536 digital code levels, while the 96 dB dynamic range and approximately -92 dB K-grade total harmonic distortion help define the resulting analog signal quality. The 0 °C to 70 °C commercial operating range suits ambient-controlled industrial enclosures rather than severe automotive or extended-temperature environments. The 24-pin SOIC package supports automated surface-mount assembly, and the parallel input permits direct connection to suitably buffered digital logic. Robust implementations should provide regulated ±5 V rails, isolate high-current switching paths from the analog output, and include filtering appropriate to the monitored control bandwidth.

🌐

Digital Communication Equipment

The PCM55HPG6 is relevant to specialized communication equipment that requires an analog output derived from a parallel digital data source. Its 1 μs typical settling time supports moderate-rate signal updates, while the 16-bit input width provides a straightforward mapping between the digital source and the DAC code range. The dual ±5 V supply arrangement enables bipolar analog levels, and the 24-pin SOIC package permits integration into compact communication modules. The part's 0 °C to 70 °C operating range limits it to appropriately controlled installations. Layout should preserve a continuous analog ground return, keep the parallel data traces away from the output node, and use local supply bypassing to reduce conversion-related disturbance on sensitive communication circuitry.

What is the PCM55HPG6?
The PCM55HPG6 is a Texas Instruments 16-bit, single-channel parallel-input digital-to-analog converter designed to generate analog output from parallel digital data. According to the Texas Instruments PCM55HP datasheet, the device uses dual ±5 V supplies, provides 96 dB dynamic range, and is packaged in a 24-pin SOIC. It is suited to audio synthesis, instrumentation, and other systems requiring parallel digital-to-analog conversion.
What are the key specifications of PCM55HPG6 that engineers should know?
The PCM55HPG6 provides 16-bit resolution, parallel data input, dual ±5 V supplies, and up to 96 dB dynamic range. The K-grade part also offers approximately -92 dB total harmonic distortion, 15-bit typical monotonicity, and a 3 μs maximum voltage-output settling time. These characteristics make it relevant to audio reconstruction, signal-generation instruments, and compact analog-output systems using a 24-pin SOIC footprint.
What is the operating voltage of PCM55HPG6?
The PCM55HPG6 operates from dual positive and negative 5 V supplies, written as ±5 V. According to the Texas Instruments PCM55HP datasheet, the bipolar supply arrangement supports analog output circuitry that may require both positive and negative signal swing. Designers should decouple the positive and negative supply rails independently and maintain the pin assignments and grounding recommendations shown in the datasheet.
What is the settling time of PCM55HPG6?
The PCM55HPG6 has a voltage-output settling time of 3 μs maximum. According to the Texas Instruments PCM55HP datasheet, this rating describes how quickly the analog output settles after a digital input change. The figure is important in test and measurement, audio synthesis, and feedback-control systems where the analog output must be valid before the next sampling or control interval.
How many bits of resolution does PCM55HPG6 provide?
The PCM55HPG6 accepts 16-bit parallel digital input and is specified with 15-bit monotonicity typical. According to the Texas Instruments PCM55HP datasheet, its K grade provides approximately -92 dB total harmonic distortion and 96 dB dynamic range. The combination of 16-bit input resolution and parallel data transfer makes the device suitable for systems in which software-generated or captured audio samples must be converted with minimal interface overhead.
Where can I find the PCM55HPG6 pinout?
The PCM55HPG6 pinout is located in the Texas Instruments PCM55HP datasheet, which shows the 24-pin SOIC connections and package drawing. Use the pin-description and connection tables when assigning the 16-bit parallel input, control signals, analog output, and supply pins. The device has 24 physical pins, so the package drawing and numbered pin table should be cross-checked together before PCB routing.
Where can I download the PCM55HPG6 datasheet PDF?
The PCM55HPG6 datasheet PDF is available through the Texas Instruments PCM55HP document linked on this page. The document provides the 16-bit parallel interface, dual ±5 V supply arrangement, 3 μs settling specification, 96 dB dynamic range, operating-temperature limits, and 24-pin SOIC information. Use the PDF as the controlling reference for pin names, voltage limits, and application-circuit details.
Is PCM55HPG6 suitable for audio applications?
The PCM55HPG6 is suitable for parallel digital audio synthesis and related audio signal-generation systems. Its 16-bit input resolution, 96 dB dynamic range, approximately -92 dB K-grade total harmonic distortion, and 3 μs maximum settling time support accurate analog reconstruction. The parallel interface is especially useful when the source already supplies multi-bit audio words without serial conversion.
What is the difference between PCM55HPG6 and PCM55HP?
The PCM55HPG6 and PCM55HP are described as having consistent terminals, packages, performance parameters, and functional characteristics, allowing replacement without circuit modification. The principal distinction is the orderable MPN and packaging arrangement associated with each suffix. Both use a 24-pin format, while PCM55HP is also shown in a tube-packaged configuration; verify the exact suffix before approving a substitution.
Can PCM55HP/1K replace PCM55HPG6?
Yes. The PCM55HP/1K is identified as a complete replacement for PCM55HPG6 because the performance parameters, functional characteristics, terminals, and package are consistent. Both are 16-bit, single-channel, 24-pin digital-to-analog converters, and the replacement does not require modification of the existing circuit. Confirm the power, temperature, and grade requirements during final qualification.
What can replace PCM55HPG6 without changing the PCB?
PCM55HP and PCM55HP/1K are identified as PCB-compatible replacements for PCM55HPG6. The cross-reference information states that their terminals and packages are consistent and that replacement requires no circuit modification. Both alternatives use the same 24-pin device format and maintain the same core 16-bit DAC functionality, although procurement should follow the exact suffix and packaging requirements of the assembly.
When should I choose PCM55HPG6 over PCM55HP?
Choose PCM55HPG6 when its exact suffix and orderable configuration match the PCB, production documentation, and incoming-inspection requirements. Choose PCM55HP when the assembly can use that alternate orderable number and the required tube or reel configuration has been confirmed. Since both parts are described as functionally and pin compatible, the practical distinction is primarily exact MPN control and packaging rather than a change in conversion performance.
Where can I buy PCM55HPG6 online?
Use the Request a Quote form on this page to ask for PCM55HPG6 availability, current commercial terms, and delivery scheduling. The part is described as a 24-SOIC, 16-bit parallel DAC, and one distributor listing reports inventory of 5,264 pieces with its own stated lead-time status. Submit the exact suffix PCM55HPG6 in the request to avoid a mismatch with PCM55HP or PCM55HP/1K.
What is the price of PCM55HPG6?
Use the Request a Quote form on this page for the current PCM55HPG6 commercial price and quantity schedule. The product is offered through a quote-oriented sales process, and no exact quantity-break table is published on this page. A quotation should identify PCM55HPG6, the 24-pin SOIC package, required delivery quantity, and the requested tube or other authorized packaging configuration.
What is the lead time for PCM55HPG6?
The current lead time for PCM55HPG6 should be confirmed through the Request a Quote form on this page. One distributor listing reports 5,264 pieces in stock and describes its estimated delivery window, but availability and scheduling can change. Provide the required quantity and target date in the request so the response reflects the current supply position for the exact PCM55HPG6 orderable number.
Is PCM55HPG6 in stock and suitable as a drop-in replacement?
The PCM55HPG6 is reported by one distributor listing as having 5,264 pieces in stock, while current stock should be confirmed through the Request a Quote form. It is itself compatible with the PCM55HP and PCM55HP/1K 24-pin configurations. For a drop-in decision, verify the package, supply arrangement, pin assignments, temperature class, and production suffix before substituting any PCM55HP-family part.

工程参考数据: PCM55HPG6 ——对比、设计指导和合规信息。

选型指南

Choose PCM55HPG6 when the controlled design specifies that exact orderable number or requires the tube-packaged 24-pin SOIC configuration. Its 16-bit parallel interface, dual ±5 V supplies, 3 μs maximum settling time, and 96 dB dynamic range fit digital audio synthesis, instrumentation, and bipolar analog-output designs. Choose PCM55HP when its orderable number and tube format are approved for the assembly; cross-reference information identifies it as functionally and pin compatible. Choose PCM55HP/1K when tape-and-reel handling is preferred for automated production and the same PCB can accept that suffix. Since the alternatives are described as complete replacements with matching packages and performance, selection should focus on exact MPN control, packaging, current procurement status, and qualification rather than an assumed functional change.

与替代料对比

参数 本产品 PCM55HP PCM55HP/1K
Package 24-SOIC (0.295 in, 7.50 mm width) 24-SOIC - same package 24-SOIC - same package
Brand Texas Instruments Texas Instruments Texas Instruments
Resolution 16 bit 16 bit 16 bit
Data Interface Parallel Parallel Parallel
Number of Channels 1 channel 1 channel 1 channel
Packaging Tube Tube Tape and reel

关键差异点

  • Exact PCM55HPG6 orderable configuration with tube packaging (对比 PCM55HP/1K)
  • Pin-compatible PCM55HP-family upgrade path (对比 PCM55HP)
  • No electrical-performance difference in the stated cross-reference (对比 PCM55HP)

设计说明

Route the 16-bit parallel data bus away from the analog output and use a continuous ground reference beneath the converter. Place the input, output, and bypass connections in accordance with the manufacturer application diagram, keeping digital traces short where possible. Because the package is a 24-pin SOIC, adequate lead spacing is required between adjacent signals; check the package drawing against the PCB land pattern before fabrication.

Provide stable, low-noise dual ±5 V rails and bypass each supply close to its associated package pins. The positive and negative rails should be decoupled independently so switching or load activity on one rail does not couple directly into the other. Validate the power rails at the device pins under maximum digital switching activity, because simultaneous data-bus transitions can create ground-bounce and supply-disturbance effects that propagate into the analog output.

Keep the analog output path short and place any required reconstruction or anti-imaging filter close to the converter. Avoid sharing narrow analog traces with digital clock, latch, or data routes. The specified 3 μs maximum voltage-output settling time should be measured at the point where the system requires a valid result, and the acquisition or feedback timing must include sufficient margin for analog settling rather than relying only on digital update timing.

Do not substitute PCM55HP or PCM55HP/1K solely because the core specifications appear similar. Confirm the exact suffix, 24-pin package, temperature grade, supply arrangement, and packaging format in the controlled bill of materials. The two alternatives are identified as complete replacements, but procurement records and assembly instructions must still use the approved orderable number for each production configuration.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The commercial operating range of 0 °C to 70 °C is documented, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated. AEC-Q100 is treated as not applicable because the part is a commercial-temperature audio DAC rather than an automotive-qualified device.

数据核验日期: 2026-11-10 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

PCM55HPG6 datasheet PCM55HPG6 datasheet pdf PCM55HPG6 pinout PCM55HPG6 specifications Texas Instruments PCM55HPG6 PCM55HPG6 16 bit DAC PCM55HPG6 equivalent PCM55HPG6 replacement PCM55HPG6 vs PCM55HP PCM55HPG6 cross reference PCM55HPG6 24-SOIC PCM55HPG6 application circuit

相关元器件 & 术语

Texas Instruments PCM55HPG6 PCM55HP PCM55HP/1K digital-to-analog converter DAC parallel data interface 16-bit resolution 15-bit monotonicity 96 dB dynamic range -92 dB total harmonic distortion 3 us settling time dual ±5 V supply 24-pin SOIC SOIC package family surface-mount package SMD digital audio synthesis audio test equipment laboratory signal generator industrial monitoring bipolar analog output Texas Instruments PCM55HP datasheet
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情