Broadcom

PEX8605-AB50NI - 4-Lane PCIe Gen 2 Switch | Broadcom

부품 번호: PEX8605-AB50NI ✓ 활성
136-aQFN (10 x 10 mm) Package
MOQ: 1 |

PEX8605-AB50NI 개요

The Broadcom PEX8605-AB50NI is a PCI Express Gen 2 switch IC with four lanes, four ports, and a 136-aQFN package measuring 10 x 10 mm. It is designed for embedded, industrial, consumer, and embedded-system designs that require PCIe connectivity beyond the capabilities of a root complex or endpoint device.

A PCI Express switch is a semiconductor device that expands one PCIe interface into multiple downstream links while managing packet traffic between a host or upstream endpoint and connected peripherals. The PEX8605-AB50NI uses a non-blocking internal switch architecture, supports packet cut-through, and provides full line-rate operation on its ports in supported configurations.

The switch supports PCIe Gen 2 operation with four lanes and four ports. In an x1-to-x1 configuration, the manufacturer documentation identifies a maximum latency of 250 ns. Packet cut-through reduces the time packets remain in the switch, while the non-blocking architecture allows multiple ports to operate concurrently. These characteristics make the device useful for systems needing additional PCIe endpoints without changing the host-side system architecture.

The PEX8605-AB50NI is suitable for embedded computing, industrial controllers, test equipment, storage systems, communications equipment, and consumer appliances requiring multiple PCIe connections. Its 10 x 10 mm aQFN package supports compact board layouts, but high-speed PCIe routing requires careful controlled-impedance layout, solid reference planes, and close decoupling.

The primary design consideration is signal integrity. PCIe differential pairs should be routed as controlled-impedance transmission lines with minimal stubs and discontinuities, while power and ground distribution should provide low-impedance return paths. The 136-aQFN package also requires careful thermal and assembly planning because its fine-pitch lead arrangement complicates rework and demands a suitable land pattern.

This product page combines the manufacturer architecture information with distributor listings and practical integration guidance. It distinguishes verified capabilities from parameters that require confirmation from the complete Broadcom datasheet, helping engineers evaluate the PEX8605-AB50NI for a new embedded or industrial platform.

드롭인 대체품: PEX8605-AB50NI — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 제품에는 사용 가능한 드롭인 대체품이 없습니다.

대체품 요청

PEX8605-AB50NI 최대 정격 & 전기적 특성

Product Type PCI Express switch IC
PCI Express Generation Gen 2.0
Lane Count 4 lanes
Port Count 4 ports
패키지 136-aQFN (10 x 10 mm)
Internal Architecture Non-blocking
Packet Handling Packet cut-through
Maximum Latency 250 ns in x1-to-x1 configuration
Throughput Behavior Full line rate on all ports
Application Segment Consumer and embedded applications
실장 유형 Surface mount
핀 수 136 pins

PEX8605-AB50NI 136-aqfn (10 x 10 mm) 핀 구성 가이드

PEX8605-AB50NI(136-aqfn (10 x 10 mm) 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

PEX8605-AB50NI의 136-aqfn (10 x 10 mm) 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: PEX8605-AB50NI.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

PEX8605-AB50NI 적합 용도: 6 애플리케이션s: Embedded PCIe Expansion, Industrial Control Systems, Test and Measurement Equipment, Network and Communications Equipment, Data Acquisition Systems, Consumer and Embedded Products.

🖥️

Embedded PCIe Expansion

The PEX8605-AB50NI fits embedded platforms that need to expand a single host-side PCIe connection into multiple downstream links. Its four-lane, four-port Gen 2 architecture gives a system designer room to attach compatible PCIe endpoints while retaining a non-blocking internal switch design. The packet cut-through path and 250 ns maximum latency in an x1-to-x1 configuration are useful for latency-sensitive embedded control, monitoring, or data-acquisition equipment. The 136-aQFN 10 x 10 mm package also helps limit board area compared with larger switch options. Design the host and endpoint links around the manufacturer-supported lane configurations, and validate return paths, reference planes, and power sequencing with PCIe signal-integrity analysis.

🏭

Industrial Control Systems

Industrial controllers can use the PEX8605-AB50NI to connect multiple PCIe endpoints to a host processor without requiring a dedicated switch for every peripheral. The four available lanes and four ports support compact endpoint aggregation in machine-control, test, and communication equipment, subject to the endpoint link-width requirements. Full line-rate operation on the supported ports helps preserve throughput when traffic is distributed across independent links. For factory equipment, pay particular attention to thermal cycling, grounding, chassis coupling, and long cable or adapter paths. The PCIe links should remain on controlled-impedance PCB routing, and any external connector or cable transition should be validated separately so it does not consume the system’s PCIe signal-integrity margin.

🔧

Test and Measurement Equipment

The PEX8605-AB50NI is useful in test and measurement chassis that need several PCIe endpoints behind one host connection. Possible endpoints include acquisition modules, communication controllers, storage adapters, and programmable logic devices, provided their lane widths and supported topology remain compatible with the switch. The non-blocking architecture supports concurrent port operation, while the four-port configuration simplifies physical partitioning of test resources. Engineers should budget routing space for the 136-aQFN fanout and maintain uninterrupted reference planes beneath every differential pair. Power sequencing must prevent endpoint initialization before the switch and host rails are stable. Where modules connect through backplanes or cables, include channel-loss and connector-budget analysis rather than relying on the board-level PCIe routing alone.

🌐

Network and Communications Equipment

Communications equipment can employ the PEX8605-AB50NI to provide dedicated PCIe connectivity for network controllers, security processors, and protocol accelerators. The four lanes and four ports allow designers to avoid sharing one endpoint link across unrelated peripherals and can improve traffic separation at the board level. The switch’s full-line-rate architecture preserves link throughput when the endpoints are active concurrently, and the 10 x 10 mm aQFN package supports dense line cards. The design must still treat PCIe as a high-speed differential interface: use the manufacturer reference topology, avoid stubs, preserve impedance, and provide locally effective decoupling. Confirm the required PCIe base specification, reference-clock architecture, reset behavior, and thermal requirements for the final communications platform.

📺

Data Acquisition Systems

Data-acquisition equipment benefits from the PEX8605-AB50NI when several high-throughput peripherals, such as digitizers, FPGA-based processing cards, or storage targets, require PCIe connectivity. The four-lane Gen 2 switch can consolidate endpoint access behind a host while maintaining non-blocking operation and full line rate across supported ports. This architecture can simplify cable management compared with allocating separate root ports to every instrument. For precision measurements, isolate switching and power-conversion regions from sensitive analog circuitry, use short return paths, and avoid splitting ground or reference planes beneath PCIe pairs. Confirm endpoint lane width and the supported PEX8605 configuration in the manufacturer documentation, then validate the complete path with PCIe compliance and system-level integrity testing.

📱

Consumer and Embedded Products

The PEX8605-AB50NI is explicitly positioned for compact consumer and embedded systems that require additional PCIe connectivity. It can provide a practical path to add storage, networking, acceleration, or display-related PCIe endpoints while preserving a single upstream host interface. Its packet cut-through feature supports low forwarding delay, and the 250 ns x1-to-x1 maximum latency is relevant for interactive embedded workloads. The 10 x 10 mm 136-aQFN package supports dense layouts, although assembly capability and exposed-pad soldering must be considered in the manufacturing plan. Keep high-speed routing away from switching regulators and antenna regions, preserve solid reference planes, and validate the final product under temperature, power, and EMC conditions because enclosure and connector transitions can materially change system-level performance.

What is the PEX8605-AB50NI?
The PEX8605-AB50NI is a Broadcom PCI Express Gen 2 switch IC with four lanes, four ports, and a 136-aQFN package measuring 10 x 10 mm. According to the Broadcom PEX8605 documentation, it uses a non-blocking internal switch architecture and supports packet cut-through. It is intended for systems requiring more PCIe connectivity than a single root port provides, including consumer and embedded applications.
What are the key specifications of PEX8605-AB50NI that engineers should know?
The PEX8605-AB50NI is a four-lane, four-port PCIe Gen 2 switch in a 136-aQFN 10 x 10 mm package. According to the Broadcom PEX8605 documentation, its non-blocking architecture supports full line-rate operation on all ports, while packet cut-through reduces forwarding delay. The manufacturer specifies maximum latency of 250 ns in an x1-to-x1 configuration, making the device useful for compact embedded PCIe expansion.
How many PCIe ports does the PEX8605-AB50NI provide?
The PEX8605-AB50NI provides four PCIe ports and supports four PCIe Gen 2 lanes. The distributor product listings identify it as a four-lane, four-port PCI Express switch, and the Broadcom PEX8605 documentation confirms the four-lane, four-port architecture. Exact lane-to-port routing configurations should be confirmed in the complete manufacturer datasheet before final board design.
What is the maximum latency of the PEX8605-AB50NI?
The maximum latency is 250 ns in an x1-to-x1 configuration. According to the Broadcom PEX8605 documentation, the device combines packet cut-through with a non-blocking internal switch architecture to reduce forwarding delay and maintain full line-rate operation. Latency can vary with port width, traffic pattern, and switch configuration, so the 250 ns figure should not be generalized to every operating condition.
Where can I download the PEX8605-AB50NI datasheet PDF?
The manufacturer-hosted PEX8605 documentation is available at https://docs.broadcom.com/doc/12351821, and an Octopart datasheet entry is available at https://octopart.com/datasheet/broadcom/PEX8605-AB50NI%20G. These links provide the appropriate starting points for the PEX8605 architecture, ordering information, and electrical characteristics. Confirm that the downloaded document covers the AB50NI temperature, package, and ordering options.
Where can I find the PEX8605-AB50NI pinout?
The PEX8605-AB50NI pin assignment and land pattern should be taken from the Broadcom manufacturer documentation linked on this page. The component uses a 136-aQFN package with a 10 x 10 mm body, but the package dimensions alone do not define signal names, power rails, or exposed-pad connections. Use the package drawing and pin-description table in the manufacturer datasheet when assigning PCB tracks and vias.
Where to buy the PEX8605-AB50NI online?
The PEX8605-AB50NI can be sourced through XAIPART by submitting the Request a Quote form on this product page. The form lets the buyer specify quantity, target packaging, shipment destination, and required production quantities. Because availability and lead time can vary by order configuration, request a written quotation and schedule confirmation before committing a manufacturing build.
What is the price of the PEX8605-AB50NI?
Current pricing for the PEX8605-AB50NI is provided through the Request a Quote form on this page. The form is the appropriate route for volume-sensitive pricing, scheduled deliveries, and packaging requirements. Submit the requested quantity and shipment details so the quote can reflect the exact order configuration and current component availability.
What is the lead time for the PEX8605-AB50NI?
Lead time depends on current inventory, purchase quantity, package allocation, and the supplier’s production schedule. Request a quote through the Request a Quote form on this page and include your required delivery date, forecast quantity, and approved vendor list. For production planning, obtain written confirmation of allocation and delivery rather than relying on an estimated lead time.
Is the PEX8605-AB50NI in stock?
Stock status should be confirmed through the Request a Quote form on this page because inventory changes with order volume and supply allocation. Include the required quantity, shipment location, and target date in the request. The manufacturer and distributor listings identify the part as an available catalog product, but a current order confirmation is required before committing to a build schedule.
PEX8605-AB50NI vs PEX8605-AB50NI G: which is the correct ordering code?
The PEX8605-AB50NI is the target device, while several distributor pages append a space and the letter G to the displayed code. Both forms appear in product listings for the same Broadcom PEX8605 offering, but the manufacturer ordering table should determine whether the G suffix represents a packaging or marking code. Verify the full ordering code against the manufacturer documentation before purchasing.
When should I choose the PEX8605-AB50NI over another PCIe switch?
Choose the PEX8605-AB50NI when the design needs a four-lane, four-port PCIe Gen 2 switch in a compact 136-aQFN package and can use the supported switch topology. Its packet cut-through architecture and 250 ns maximum x1-to-x1 latency suit embedded and consumer systems. Do not select it merely by package size; verify protocol revision, lane routing, power requirements, firmware support, and signal-integrity constraints.
Is the PEX8605-AB50NI suitable for embedded systems?
The PEX8605-AB50NI is suitable for embedded systems that require four PCIe Gen 2 lanes and four switch ports. The Broadcom PEX8605 documentation identifies consumer and embedded applications and describes a low-power, non-blocking architecture. Suitability depends on the host controller, endpoint requirements, lane configuration, operating temperature, and whether the system needs features beyond the supported PCIe Gen 2 capability.
What can replace the PEX8605-AB50NI?
A true drop-in replacement must match the 136-aQFN footprint, pin assignment, PCIe generation, lane and port counts, power configuration, and reference-clock behavior. No verified drop-in substitute is identified for the PEX8605-AB50NI in the current cross-reference information. A differently packaged PCIe switch may provide similar functionality but would require a PCB redesign, so it must not be treated as a direct replacement.
Is there a Broadcom equivalent for the PEX8605-AB50NI?
The verified PEX8605 documentation identifies the PEX8605 family as a four-lane, four-port PCIe Gen 2 switch family, but it does not establish a separate Broadcom MPN as a pin-for-pin replacement. Distributor entries ending in AB50NI G appear to refer to the same target offering rather than an independently validated substitute. Use the manufacturer ordering table and package data to confirm any alternate ordering suffix.
How should the PEX8605-AB50NI PCIe lanes be routed on a PCB?
Route each PCIe differential pair as a controlled-impedance transmission line with a continuous reference plane and without unnecessary vias or stubs. Keep differential-pair geometry consistent, avoid routing over split plane boundaries, and provide low-impedance power and ground distribution. Because the device uses a fine-pitch 136-aQFN package, follow the manufacturer land pattern and assembly guidelines for fanout, solder mask, and exposed-pad thermal design.

엔지니어링 참조 데이터: PEX8605-AB50NI — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose the PEX8605-AB50NI when a design requires a four-lane, four-port PCIe Gen 2 switch in a 10 x 10 mm 136-aQFN package. It is particularly suitable for embedded, industrial, test, communications, and consumer products that need several downstream PCIe connections behind one upstream link. Its non-blocking architecture, packet cut-through behavior, full-line-rate operation, and 250 ns maximum x1-to-x1 latency support responsive concurrent traffic. Do not substitute it solely on port count: the replacement must also match pin assignment, package, supply rails, clocking, reset behavior, lane routing, PCIe revision, and firmware requirements. No separately validated drop-in substitute is identified. If a candidate uses another package or supports a different PCIe generation, treat it as a redesign-level option and evaluate board changes, signal integrity, software support, qualification effort, and schedule before selecting it.

대체품과의 비교

파라미터 이 제품
Product Type PCI Express switch IC
PCI Express Generation Gen 2.0
Lane Count 4 lanes
Port Count 4 ports
Package 136-aQFN (10 x 10 mm)
Brand Broadcom
Internal Architecture Non-blocking
Maximum Latency 250 ns in x1-to-x1 configuration
Packet Handling Packet cut-through
Throughput Behavior Full line rate on all ports

주요 차별점

  • Four-lane, four-port PCIe Gen 2 integration in a compact package (vs No verified drop-in alternative)
  • Low-latency packet forwarding (vs No verified drop-in alternative)
  • Concurrent full-line-rate port operation (vs No verified drop-in alternative)

설계 노트

Treat every PCIe link as a controlled-impedance differential transmission line. Route the PEX8605-AB50NI differential pairs over a continuous reference plane, keep pair geometry matched, minimize vias and stubs, and avoid plane splits beneath the links. Validate the 136-aQFN escape routing and any connector or cable transition with PCIe channel analysis.

Follow the manufacturer’s power-plane, decoupling, and sequencing recommendations for the switch and connected PCIe endpoints. Place local high-frequency decoupling close to the relevant package pins, provide a low-impedance return path, and avoid powering endpoint devices before the switch and host rails are stable. Confirm voltage tolerances and sequencing requirements from the complete manufacturer datasheet.

The 136-aQFN package has fine-pitch contacts that require the manufacturer land pattern, mask and paste recommendations, and adequate thermal-via design around the exposed pad. Review PCB assembly capability for this package before committing to a design. Keep high-speed differential routes away from switching-regulator loops and provide clean partitioning between PCIe, power, and sensitive external interfaces.

Do not treat a switch with the same port count as a drop-in replacement without verifying the complete pinout, reference clocks, power rails, PCIe generation, lane routing, reset inputs, firmware, and exposed-pad connection. The verified cross-reference information identifies no separately validated drop-in substitute for the PEX8605-AB50NI. A PCB redesign is required for any differently packaged or materially different switch.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit compliance declarations are identified in the manufacturer architecture page or distributor snippets. The device is an industrial and embedded PCIe switch rather than an automotive-qualified AEC-Q100 product.

데이터 검증일: 2026-11-11 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

PEX8605-AB50NI datasheet PEX8605-AB50NI specifications PEX8605-AB50NI pinout PEX8605-AB50NI datasheet pdf Broadcom PEX8605-AB50NI PEX8605-AB50NI 4 lane 4 port PEX8605-AB50NI 136 aQFN PEX8605-AB50NI embedded system PEX8605-AB50NI equivalent PEX8605-AB50NI replacement PEX8605-AB50NI cross reference PEX8605-AB50NI price PEX8605-AB50NI stock PEX8605-AB50NI PCIe Gen 2 switch

관련 부품 & 용어

Broadcom PEX8605-AB50NI PCI Express switch PCI Express Gen 2 PCIe interface IC 4-lane PCIe switch 4-port PCIe switch non-blocking switch architecture packet cut-through full line rate 250 ns maximum latency 136-aQFN 10 x 10 mm package surface-mount semiconductor controlled-impedance routing differential pair embedded systems industrial control systems test and measurement equipment consumer electronics PCIe endpoint switched fabric semiconductor interface IC
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기